]> git.sur5r.net Git - u-boot/commitdiff
i2c, ppc4xx: fix compiling KAREF and METROBOX boards.
authorHeiko Schocher <hs@denx.de>
Thu, 3 Dec 2009 10:23:17 +0000 (11:23 +0100)
committerStefan Roese <sr@denx.de>
Tue, 22 Dec 2009 04:52:48 +0000 (05:52 +0100)
commit eb5eb2b0f744f0cba405160c5d01335c40f09acf

ppc4xx: Cleanup PPC4xx I2C infrastructure

This patch cleans up the PPC4xx I2C intrastructure:

- Use C struct to describe the I2C registers instead of defines
- Coding style cleanup (braces, whitespace, comments, line length)
- Extract common code from i2c_read() and i2c_write()
- Remove unneeded IIC defines from ppc405.h & ppc440.h

breaks comiling for the KAREF and METROBOX boards.

This patch fixes this issue.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
board/sandburst/common/ppc440gx_i2c.c
board/sandburst/common/ppc440gx_i2c.h

index bc88e5a7eb362410a4301001dc00498a04b7db09..35c4e60b5acd3c4f6ef951cdfa1594e45539c07f 100644 (file)
@@ -31,6 +31,7 @@
 #include <i2c.h>
 #include <command.h>
 #include "ppc440gx_i2c.h"
+#include <asm-ppc/io.h>
 
 #ifdef CONFIG_I2C_BUS1
 
 static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES;
 #endif
 
+static struct ppc4xx_i2c *i2c = (struct ppc4xx_i2c *)I2C_REGISTERS_BUS1_BASE_ADDRESS;
+
 static void _i2c_bus1_reset (void)
 {
        int i, status;
 
        /* Reset status register */
        /* write 1 in SCMP and IRQA to clear these fields */
-       out8 (IIC_STS1, 0x0A);
+       out_8 (IIC_STS1, 0x0A);
 
        /* write 1 in IRQP IRQD LA ICT XFRA to clear these fields */
-       out8 (IIC_EXTSTS1, 0x8F);
+       out_8 (IIC_EXTSTS1, 0x8F);
        __asm__ volatile ("eieio");
 
        /*
@@ -66,36 +69,36 @@ static void _i2c_bus1_reset (void)
        i = 10;
        do {
                /* Get status */
-               status = in8 (IIC_STS1);
+               status = in_8 (IIC_STS1);
                udelay (500);                   /* 500us */
                i--;
        } while ((status & IIC_STS_PT) && (i > 0));
        /* Soft reset controller */
-       status = in8 (IIC_XTCNTLSS1);
-       out8 (IIC_XTCNTLSS1, (status | IIC_XTCNTLSS_SRST));
+       status = in_8 (IIC_XTCNTLSS1);
+       out_8 (IIC_XTCNTLSS1, (status | IIC_XTCNTLSS_SRST));
        __asm__ volatile ("eieio");
 
        /* make sure where in initial state, data hi, clock hi */
-       out8 (IIC_DIRECTCNTL1, 0xC);
+       out_8 (IIC_DIRECTCNTL1, 0xC);
        for (i = 0; i < 10; i++) {
-               if ((in8 (IIC_DIRECTCNTL1) & 0x3) != 0x3) {
+               if ((in_8 (IIC_DIRECTCNTL1) & 0x3) != 0x3) {
                        /* clock until we get to known state */
-                       out8 (IIC_DIRECTCNTL1, 0x8);    /* clock lo */
+                       out_8 (IIC_DIRECTCNTL1, 0x8);   /* clock lo */
                        udelay (100);           /* 100us */
-                       out8 (IIC_DIRECTCNTL1, 0xC);    /* clock hi */
+                       out_8 (IIC_DIRECTCNTL1, 0xC);   /* clock hi */
                        udelay (100);           /* 100us */
                } else {
                        break;
                }
        }
        /* send start condition */
-       out8 (IIC_DIRECTCNTL1, 0x4);
+       out_8 (IIC_DIRECTCNTL1, 0x4);
        udelay (1000);                          /* 1ms */
        /* send stop condition */
-       out8 (IIC_DIRECTCNTL1, 0xC);
+       out_8 (IIC_DIRECTCNTL1, 0xC);
        udelay (1000);                          /* 1ms */
        /* Unreset controller */
-       out8 (IIC_XTCNTLSS1, (status & ~IIC_XTCNTLSS_SRST));
+       out_8 (IIC_XTCNTLSS1, (status & ~IIC_XTCNTLSS_SRST));
        udelay (1000);                          /* 1ms */
 }
 
@@ -117,16 +120,16 @@ void i2c1_init (int speed, int slaveadd)
        _i2c_bus1_reset ();
 
        /* clear lo master address */
-       out8 (IIC_LMADR1, 0);
+       out_8 (IIC_LMADR1, 0);
 
        /* clear hi master address */
-       out8 (IIC_HMADR1, 0);
+       out_8 (IIC_HMADR1, 0);
 
        /* clear lo slave address */
-       out8 (IIC_LSADR1, 0);
+       out_8 (IIC_LSADR1, 0);
 
        /* clear hi slave address */
-       out8 (IIC_HSADR1, 0);
+       out_8 (IIC_HSADR1, 0);
 
        /* Clock divide Register */
        /* get OPB frequency */
@@ -136,25 +139,25 @@ void i2c1_init (int speed, int slaveadd)
        divisor = (freqOPB - 1) / 10000000;
        if (divisor == 0)
                divisor = 1;
-       out8 (IIC_CLKDIV1, divisor);
+       out_8 (IIC_CLKDIV1, divisor);
 
        /* no interrupts */
-       out8 (IIC_INTRMSK1, 0);
+       out_8 (IIC_INTRMSK1, 0);
 
        /* clear transfer count */
-       out8 (IIC_XFRCNT1, 0);
+       out_8 (IIC_XFRCNT1, 0);
 
        /* clear extended control & stat */
        /* write 1 in SRC SRS SWC SWS to clear these fields */
-       out8 (IIC_XTCNTLSS1, 0xF0);
+       out_8 (IIC_XTCNTLSS1, 0xF0);
 
        /* Mode Control Register
           Flush Slave/Master data buffer */
-       out8 (IIC_MDCNTL1, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB);
+       out_8 (IIC_MDCNTL1, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB);
        __asm__ volatile ("eieio");
 
 
-       val = in8(IIC_MDCNTL1);
+       val = in_8(IIC_MDCNTL1);
        __asm__ volatile ("eieio");
 
        /* Ignore General Call, slave transfers are ignored,
@@ -167,10 +170,10 @@ void i2c1_init (int speed, int slaveadd)
        if( speed >= 400000 ){
                val |= IIC_MDCNTL_FSM;
        }
-       out8 (IIC_MDCNTL1, val);
+       out_8 (IIC_MDCNTL1, val);
 
        /* clear control reg */
-       out8 (IIC_CNTL1, 0x00);
+       out_8 (IIC_CNTL1, 0x00);
        __asm__ volatile ("eieio");
 
 }
@@ -178,7 +181,7 @@ void i2c1_init (int speed, int slaveadd)
 /*
   This code tries to use the features of the 405GP i2c
   controller. It will transfer up to 4 bytes in one pass
-  on the loop. It only does out8(lbz) to the buffer when it
+  on the loop. It only does out_8(lbz) to the buffer when it
   is possible to do out16(lhz) transfers.
 
   cmd_type is 0 for write 1 for read.
@@ -232,12 +235,12 @@ int i2c_transfer1(unsigned char cmd_type,
        }
 
        /*Clear Stop Complete Bit*/
-       out8(IIC_STS1,IIC_STS_SCMP);
+       out_8(IIC_STS1,IIC_STS_SCMP);
        /* Check init */
        i=10;
        do {
                /* Get status */
-               status = in8(IIC_STS1);
+               status = in_8(IIC_STS1);
                __asm__ volatile("eieio");
                i--;
        } while ((status & IIC_STS_PT) && (i>0));
@@ -247,12 +250,12 @@ int i2c_transfer1(unsigned char cmd_type,
                return(result);
        }
        /*flush the Master/Slave Databuffers*/
-       out8(IIC_MDCNTL1, ((in8(IIC_MDCNTL1))|IIC_MDCNTL_FMDB|IIC_MDCNTL_FSDB));
+       out_8(IIC_MDCNTL1, ((in_8(IIC_MDCNTL1))|IIC_MDCNTL_FMDB|IIC_MDCNTL_FSDB));
        /*need to wait 4 OPB clocks? code below should take that long*/
 
        /* 7-bit adressing */
-       out8(IIC_HMADR1,0);
-       out8(IIC_LMADR1, chip);
+       out_8(IIC_HMADR1,0);
+       out_8(IIC_LMADR1, chip);
        __asm__ volatile("eieio");
 
        tran = 0;
@@ -280,11 +283,11 @@ int i2c_transfer1(unsigned char cmd_type,
                else {
                        for(j=0; j<bc; j++) {
                                /* Set buffer */
-                               out8(IIC_MDBUF1,ptr[tran+j]);
+                               out_8(IIC_MDBUF1,ptr[tran+j]);
                                __asm__ volatile("eieio");
                        }
                }
-               out8(IIC_CNTL1, creg );
+               out_8(IIC_CNTL1, creg );
                __asm__ volatile("eieio");
 
                /* Transfer is in progress
@@ -297,7 +300,7 @@ int i2c_transfer1(unsigned char cmd_type,
                i=2*5*8;
                do {
                        /* Get status */
-                       status = in8(IIC_STS1);
+                       status = in_8(IIC_STS1);
                        __asm__ volatile("eieio");
                        udelay (10);
                        i--;
@@ -306,7 +309,7 @@ int i2c_transfer1(unsigned char cmd_type,
 
                if (status & IIC_STS_ERR) {
                        result = IIC_NOK;
-                       status = in8 (IIC_EXTSTS1);
+                       status = in_8 (IIC_EXTSTS1);
                        /* Lost arbitration? */
                        if (status & IIC_EXTSTS_LA)
                                result = IIC_NOK_LA;
@@ -331,7 +334,7 @@ int i2c_transfer1(unsigned char cmd_type,
                                */
                                udelay (1);
                                for(j=0;j<bc;j++) {
-                                       ptr[tran+j] = in8(IIC_MDBUF1);
+                                       ptr[tran+j] = in_8(IIC_MDBUF1);
                                        __asm__ volatile("eieio");
                                }
                        } else
index 90f27caa0dad331ca4be3db887aadd5bc100f124..0676c0e40f05f1f90abcc3834a1843cc9bb9be40 100644 (file)
 
 #define I2C_BUS1_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x00000500)
 #define           I2C_REGISTERS_BUS1_BASE_ADDRESS I2C_BUS1_BASE_ADDR
-#define    IIC_MDBUF1  (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICMDBUF)
-#define    IIC_SDBUF1  (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICSDBUF)
-#define    IIC_LMADR1  (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICLMADR)
-#define    IIC_HMADR1  (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICHMADR)
-#define    IIC_CNTL1   (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICCNTL)
-#define    IIC_MDCNTL1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICMDCNTL)
-#define    IIC_STS1    (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICSTS)
-#define    IIC_EXTSTS1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICEXTSTS)
-#define    IIC_LSADR1  (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICLSADR)
-#define    IIC_HSADR1  (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICHSADR)
-#define    IIC_CLKDIV1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IIC0_CLKDIV)
-#define    IIC_INTRMSK1        (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICINTRMSK)
-#define    IIC_XFRCNT1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICXFRCNT)
-#define    IIC_XTCNTLSS1       (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICXTCNTLSS)
-#define    IIC_DIRECTCNTL1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICDIRECTCNTL)
+#define    IIC_MDBUF1  (&i2c->mdbuf)
+#define    IIC_SDBUF1  (&i2c->sdbuf)
+#define    IIC_LMADR1  (&i2c->lmadr)
+#define    IIC_HMADR1  (&i2c->hmadr)
+#define    IIC_CNTL1   (&i2c->cntl)
+#define    IIC_MDCNTL1 (&i2c->mdcntl)
+#define    IIC_STS1    (&i2c->sts)
+#define    IIC_EXTSTS1 (&i2c->extsts)
+#define    IIC_LSADR1  (&i2c->lsadr)
+#define    IIC_HSADR1  (&i2c->hsadr)
+#define    IIC_CLKDIV1 (&i2c->clkdiv)
+#define    IIC_INTRMSK1        (&i2c->intrmsk)
+#define    IIC_XFRCNT1 (&i2c->xfrcnt)
+#define    IIC_XTCNTLSS1       (&i2c->xtcntlss)
+#define    IIC_DIRECTCNTL1 (&i2c->directcntl)
 
 void i2c1_init (int speed, int slaveadd);
 int i2c_probe1 (uchar chip);