]> git.sur5r.net Git - u-boot/commitdiff
ls1021atwr: add hwconfig setting to do pin mux
authorYao Yuan <yao.yuan@freescale.com>
Tue, 3 Mar 2015 08:35:18 +0000 (16:35 +0800)
committerYork Sun <yorksun@freescale.com>
Tue, 21 Apr 2015 17:19:19 +0000 (10:19 -0700)
Freescale LS1021ATWR share some pins. Hwconfig option is used to
allows users to choose the pin functions.

Signed-off-by: Yuan Yao <yao.yuan@freescale.com>
[York Sun: revised commit message]
Reviewed-by: York Sun <yorksun@freescale.com>
board/freescale/ls1021atwr/ls1021atwr.c

index a9c87f2a229435bee79541610a7b7c43d4533833..8633ec08dde5f99a9cc185ea8bfb701e009e6214 100644 (file)
@@ -13,6 +13,7 @@
 #include <asm/arch/fsl_serdes.h>
 #include <asm/arch/ls102xa_stream_id.h>
 #include <asm/pcie_layerscape.h>
+#include <hwconfig.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <fsl_ifc.h>
@@ -54,6 +55,17 @@ DECLARE_GLOBAL_DATA_PTR;
 #define KEEP_STATUS            0x0
 #define NEED_RESET             0x1
 
+#define SOFT_MUX_ON_I2C3_IFC   0x2
+#define SOFT_MUX_ON_CAN3_USB2  0x8
+#define SOFT_MUX_ON_QE_LCD     0x10
+
+#define PIN_I2C3_IFC_MUX_I2C3  0x0
+#define PIN_I2C3_IFC_MUX_IFC   0x1
+#define PIN_CAN3_USB2_MUX_USB2 0x0
+#define PIN_CAN3_USB2_MUX_CAN3 0x1
+#define PIN_QE_LCD_MUX_LCD     0x0
+#define PIN_QE_LCD_MUX_QE      0x1
+
 struct cpld_data {
        u8 cpld_ver;            /* cpld revision */
        u8 cpld_ver_sub;        /* cpld sub revision */
@@ -271,6 +283,68 @@ int config_serdes_mux(void)
 }
 #endif
 
+#ifndef CONFIG_QSPI_BOOT
+int config_board_mux(void)
+{
+       struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
+       int conflict_flag;
+
+       conflict_flag = 0;
+       if (hwconfig("i2c3")) {
+               conflict_flag++;
+               cpld_data->soft_mux_on |= SOFT_MUX_ON_I2C3_IFC;
+               cpld_data->i2c3_ifc_mux = PIN_I2C3_IFC_MUX_I2C3;
+       }
+
+       if (hwconfig("ifc")) {
+               conflict_flag++;
+               /* some signals can not enable simultaneous*/
+               if (conflict_flag > 1)
+                       goto conflict;
+               cpld_data->soft_mux_on |= SOFT_MUX_ON_I2C3_IFC;
+               cpld_data->i2c3_ifc_mux = PIN_I2C3_IFC_MUX_IFC;
+       }
+
+       conflict_flag = 0;
+       if (hwconfig("usb2")) {
+               conflict_flag++;
+               cpld_data->soft_mux_on |= SOFT_MUX_ON_CAN3_USB2;
+               cpld_data->can3_usb2_mux = PIN_CAN3_USB2_MUX_USB2;
+       }
+
+       if (hwconfig("can3")) {
+               conflict_flag++;
+               /* some signals can not enable simultaneous*/
+               if (conflict_flag > 1)
+                       goto conflict;
+               cpld_data->soft_mux_on |= SOFT_MUX_ON_CAN3_USB2;
+               cpld_data->can3_usb2_mux = PIN_CAN3_USB2_MUX_CAN3;
+       }
+
+       conflict_flag = 0;
+       if (hwconfig("lcd")) {
+               conflict_flag++;
+               cpld_data->soft_mux_on |= SOFT_MUX_ON_QE_LCD;
+               cpld_data->qe_lcd_mux = PIN_QE_LCD_MUX_LCD;
+       }
+
+       if (hwconfig("qe")) {
+               conflict_flag++;
+               /* some signals can not enable simultaneous*/
+               if (conflict_flag > 1)
+                       goto conflict;
+               cpld_data->soft_mux_on |= SOFT_MUX_ON_QE_LCD;
+               cpld_data->qe_lcd_mux = PIN_QE_LCD_MUX_QE;
+       }
+
+       return 0;
+
+conflict:
+       printf("WARNING: pin conflict! MUX setting may failed!\n");
+       return 0;
+}
+#endif
+
 int board_early_init_f(void)
 {
        struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
@@ -480,6 +554,10 @@ int board_init(void)
 #if defined(CONFIG_MISC_INIT_R)
 int misc_init_r(void)
 {
+#ifndef CONFIG_QSPI_BOOT
+       config_board_mux();
+#endif
+
 #ifdef CONFIG_FSL_CAAM
        return sec_init();
 #endif