]> git.sur5r.net Git - u-boot/commitdiff
spl mxc nand: Remove duplicated code
authorBenoît Thébaudeau <benoit.thebaudeau@advansee.com>
Mon, 13 Aug 2012 20:49:15 +0000 (22:49 +0200)
committerScott Wood <scottwood@freescale.com>
Tue, 18 Sep 2012 00:42:46 +0000 (19:42 -0500)
The ECC_EN and INT_MSK bits of CONFIG1 are not volatile, so it is sufficient to
set them once in nfc_nand_init().

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
nand_spl/nand_boot_fsl_nfc.c

index b98fe41620fb3bbb9bb6ed8641f08f9dcc7739f7..059969ba9a5e5aeeacce9a93506dbfd2d00720ea 100644 (file)
@@ -57,7 +57,7 @@ static void nfc_nand_init(void)
        writew(0x2, &nfc->config);
 
        /* hardware ECC checking and correct */
-       config1 = readw(&nfc->config1) | NFC_ECC_EN | NFC_FP_INT;
+       config1 = readw(&nfc->config1) | NFC_ECC_EN | NFC_INT_MSK | NFC_FP_INT;
        /*
         * if spare size is larger that 16 bytes per 512 byte hunk
         * then use 8 symbol correction instead of 4
@@ -72,7 +72,7 @@ static void nfc_nand_init(void)
        writew(0x2, &nfc->config);
 
        /* hardware ECC checking and correct */
-       writew(NFC_ECC_EN, &nfc->config1);
+       writew(NFC_ECC_EN | NFC_INT_MSK, &nfc->config1);
 #endif
 }
 
@@ -116,13 +116,10 @@ static void nfc_nand_page_address(unsigned int page_address)
 
 static void nfc_nand_data_output(void)
 {
-       int config1 = readw(&nfc->config1);
 #ifdef NAND_MXC_2K_MULTI_CYCLE
        int i;
 #endif
 
-       config1 |= NFC_ECC_EN | NFC_INT_MSK;
-       writew(config1, &nfc->config1);
        writew(0, &nfc->buf_addr);
        writew(NFC_OUTPUT, &nfc->config2);
        nfc_wait_ready();
@@ -132,9 +129,6 @@ static void nfc_nand_data_output(void)
         * for pages larger than 512 bytes.
         */
        for (i = 1; i < CONFIG_SYS_NAND_PAGE_SIZE / 512; i++) {
-               config1 = readw(&nfc->config1);
-               config1 |= NFC_ECC_EN | NFC_INT_MSK;
-               writew(config1, &nfc->config1);
                writew(i, &nfc->buf_addr);
                writew(NFC_OUTPUT, &nfc->config2);
                nfc_wait_ready();