]> git.sur5r.net Git - u-boot/commitdiff
imx27lite: add support for imx27lite board from LogicPD
authorIlya Yanok <yanok@emcraft.com>
Mon, 10 Aug 2009 22:32:09 +0000 (02:32 +0400)
committerJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Tue, 1 Sep 2009 20:10:55 +0000 (22:10 +0200)
This patch adds support for i.MX27-LITEKIT development board from
LogicPD. This board uses i.MX27 SoC and has 2MB NOR flash, 64MB NAND
flash, FEC ethernet controller integrated into i.MX27.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Acked-by: Wolfgang Denk <wd@denx.de>
MAINTAINERS
MAKEALL
Makefile
board/logicpd/imx27lite/Makefile [new file with mode: 0644]
board/logicpd/imx27lite/config.mk [new file with mode: 0644]
board/logicpd/imx27lite/imx27lite.c [new file with mode: 0644]
board/logicpd/imx27lite/lowlevel_init.S [new file with mode: 0644]
cpu/arm926ejs/mx27/generic.c
include/asm-arm/arch-mx27/imx-regs.h
include/configs/imx27lite.h [new file with mode: 0644]

index f99eae596c14478050347d69d32962c5f98463f9..0d4a978399d9d611802f1a93ee8e92b39e219743 100644 (file)
@@ -543,6 +543,7 @@ George G. Davis <gdavis@mvista.com>
        gcplus          SA1100
 
 Wolfgang Denk <wd@denx.de>
+       imx27lite       i.MX27
        qong            i.MX31
 
 Thomas Elste <info@elste.org>
diff --git a/MAKEALL b/MAKEALL
index c8a1f37d1d02217769d760fe4072bf5682534b5e..48facb8af6df34db13ae7eb69917ef97521f1d71 100755 (executable)
--- a/MAKEALL
+++ b/MAKEALL
@@ -520,6 +520,7 @@ LIST_ARM9="                 \
        cp926ejs                \
        cp946es                 \
        cp966                   \
+       imx27lite               \
        lpd7a400                \
        mv88f6281gtw_ge         \
        mx1ads                  \
index c9727f8dab615af08fe0fb81620e23175394c526..bffc036b2d392189564d53046313f01fe9b41d69 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -2938,6 +2938,9 @@ davinci_sonata_config :   unconfig
 davinci_dm355evm_config :      unconfig
        @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci
 
+imx27lite_config:      unconfig
+       @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
+
 lpd7a400_config \
 lpd7a404_config:       unconfig
        @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
diff --git a/board/logicpd/imx27lite/Makefile b/board/logicpd/imx27lite/Makefile
new file mode 100644 (file)
index 0000000..c404cef
--- /dev/null
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB    = $(obj)lib$(BOARD).a
+
+COBJS  := imx27lite.o
+SOBJS  := lowlevel_init.o
+
+SRCS   := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS   := $(addprefix $(obj),$(COBJS))
+SOBJS  := $(addprefix $(obj),$(SOBJS))
+
+$(LIB):        $(obj).depend $(OBJS) $(SOBJS)
+       $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+       rm -f $(SOBJS) $(OBJS)
+
+distclean:     clean
+       rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
+
diff --git a/board/logicpd/imx27lite/config.mk b/board/logicpd/imx27lite/config.mk
new file mode 100644 (file)
index 0000000..a2e7768
--- /dev/null
@@ -0,0 +1 @@
+TEXT_BASE = 0xA7F00000
diff --git a/board/logicpd/imx27lite/imx27lite.c b/board/logicpd/imx27lite/imx27lite.c
new file mode 100644 (file)
index 0000000..63375d5
--- /dev/null
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2007 Sascha Hauer, Pengutronix
+ * Copyright (C) 2008,2009 Eric Jarrige <jorasse@users.sourceforge.net>
+ * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init (void)
+{
+       struct gpio_regs *regs = (struct gpio_regs *)IMX_GPIO_BASE;
+
+       gd->bd->bi_arch_number = MACH_TYPE_IMX27LITE;
+       gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+#ifdef CONFIG_MXC_UART
+       mx27_uart_init_pins();
+#endif
+#ifdef CONFIG_FEC_MXC
+       mx27_fec_init_pins();
+       imx_gpio_mode((GPIO_PORTC | GPIO_OUT | GPIO_PUEN | GPIO_GPIO | 31));
+       writel(readl(&regs->port[PORTC].dr) | (1 << 31),
+                               &regs->port[PORTC].dr);
+#endif
+#ifdef CONFIG_MXC_MMC
+       mx27_sd2_init_pins();
+#endif
+
+       return 0;
+}
+
+int dram_init (void)
+{
+
+#if CONFIG_NR_DRAM_BANKS > 0
+       gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+       gd->bd->bi_dram[0].size = get_ram_size((volatile void *)PHYS_SDRAM_1,
+                       PHYS_SDRAM_1_SIZE);
+#endif
+#if CONFIG_NR_DRAM_BANKS > 1
+       gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+       gd->bd->bi_dram[1].size = get_ram_size((volatile void *)PHYS_SDRAM_2,
+                       PHYS_SDRAM_2_SIZE);
+#endif
+
+       return 0;
+}
+
+int checkboard(void)
+{
+       printf("LogicPD imx27lite\n");
+       return 0;
+}
diff --git a/board/logicpd/imx27lite/lowlevel_init.S b/board/logicpd/imx27lite/lowlevel_init.S
new file mode 100644 (file)
index 0000000..e2cdecb
--- /dev/null
@@ -0,0 +1,170 @@
+/*
+ * For clock initialization, see chapter 3 of the "MCIMX27 Multimedia
+ * Applications Processor Reference Manual, Rev. 0.2".
+ *
+ * (C) Copyright 2008 Eric Jarrige <eric.jarrige@armadeus.org>
+ * (C) Copyright 2009 Ilya Yanok <yanok@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+#include <version.h>
+#include <asm/macro.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/asm-offsets.h>
+
+SOC_ESDCTL_BASE_W:     .word   IMX_ESD_BASE
+SOC_SI_ID_REG_W:       .word   IMX_SYSTEM_CTL_BASE
+SDRAM_ESDCFG_T1_W:     .word   SDRAM_ESDCFG_REGISTER_VAL(0)
+SDRAM_ESDCFG_T2_W:     .word   SDRAM_ESDCFG_REGISTER_VAL(3)
+SDRAM_PRECHARGE_CMD_W: .word   (ESDCTL_SDE | ESDCTL_SMODE_PRECHARGE | \
+                                ESDCTL_ROW13 | ESDCTL_COL10)
+SDRAM_AUTOREF_CMD_W:   .word   (ESDCTL_SDE | ESDCTL_SMODE_AUTO_REF | \
+                                ESDCTL_ROW13 | ESDCTL_COL10)
+SDRAM_LOADMODE_CMD_W:  .word   (ESDCTL_SDE | ESDCTL_SMODE_LOAD_MODE | \
+                                ESDCTL_ROW13 | ESDCTL_COL10)
+SDRAM_NORMAL_CMD_W:    .word   SDRAM_ESDCTL_REGISTER_VAL
+
+.macro init_aipi
+       /*
+        * setup AIPI1 and AIPI2
+        */
+       write32 AIPI1_PSR0, AIPI1_PSR0_VAL
+       write32 AIPI1_PSR1, AIPI1_PSR1_VAL
+       write32 AIPI2_PSR0, AIPI2_PSR0_VAL
+       write32 AIPI2_PSR1, AIPI2_PSR1_VAL
+
+.endm /* init_aipi */
+
+.macro init_clock
+       ldr r0, =CSCR
+       /* disable MPLL/SPLL first */
+       ldr r1, [r0]
+       bic r1, r1, #(CSCR_MPEN|CSCR_SPEN)
+       str r1, [r0]
+
+       write32 MPCTL0, MPCTL0_VAL
+       write32 SPCTL0, SPCTL0_VAL
+
+       write32 CSCR, CSCR_VAL | CSCR_MPLL_RESTART | CSCR_SPLL_RESTART
+
+       /*
+        * add some delay here
+        */
+       wait_timer 0x1000
+
+       /* peripheral clock divider */
+       write32 PCDR0, PCDR0_VAL
+       write32 PCDR1, PCDR1_VAL
+
+       /* Configure PCCR0 and PCCR1 */
+       write32 PCCR0, PCCR0_VAL
+       write32 PCCR1, PCCR1_VAL
+
+.endm /* init_clock */
+
+.macro sdram_init
+       ldr r0, SOC_ESDCTL_BASE_W
+       mov r2, #PHYS_SDRAM_1
+
+       /* Do initial reset */
+       mov r1, #ESDMISC_MDDR_DL_RST
+       str r1, [r0, #ESDMISC_ROF]
+
+       /* Hold for more than 200ns */
+       wait_timer 0x10000
+
+       /* Activate LPDDR iface */
+       mov r1, #ESDMISC_MDDREN
+       str r1, [r0, #ESDMISC_ROF]
+
+       /* Check The chip version TO1 or TO2 */
+       ldr r1, SOC_SI_ID_REG_W
+       ldr r1, [r1]
+       ands r1, r1, #0xF0000000
+       /* add Latency on CAS only for TO2 */
+       ldreq r1, SDRAM_ESDCFG_T2_W
+       ldrne r1, SDRAM_ESDCFG_T1_W
+       str r1, [r0, #ESDCFG0_ROF]
+
+       /* Run initialization sequence */
+       ldr r1, SDRAM_PRECHARGE_CMD_W
+       str r1, [r0, #ESDCTL0_ROF]
+       ldr r1, [r2, #SDRAM_ALL_VAL]
+
+       ldr r1, SDRAM_AUTOREF_CMD_W
+       str r1, [r0, #ESDCTL0_ROF]
+       ldr r1, [r2, #SDRAM_ALL_VAL]
+       ldr r1, [r2, #SDRAM_ALL_VAL]
+
+       ldr r1, SDRAM_LOADMODE_CMD_W
+       str r1, [r0, #ESDCTL0_ROF]
+       ldrb r1, [r2, #SDRAM_MODE_REGISTER_VAL]
+       add r3, r2, #SDRAM_EXT_MODE_REGISTER_VAL
+       ldrb r1, [r3]
+
+       ldr r1, SDRAM_NORMAL_CMD_W
+       str r1, [r0, #ESDCTL0_ROF]
+
+#if (CONFIG_NR_DRAM_BANKS > 1)
+       /* 2nd sdram */
+       mov r2, #PHYS_SDRAM_2
+
+       /* Check The chip version TO1 or TO2 */
+       ldr r1, SOC_SI_ID_REG_W
+       ldr r1, [r1]
+       ands r1, r1, #0xF0000000
+       /* add Latency on CAS only for TO2 */
+       ldreq r1, SDRAM_ESDCFG_T2_W
+       ldrne r1, SDRAM_ESDCFG_T1_W
+       str r1, [r0, #ESDCFG1_ROF]
+
+       /* Run initialization sequence */
+       ldr r1, SDRAM_PRECHARGE_CMD_W
+       str r1, [r0, #ESDCTL1_ROF]
+       ldr r1, [r2, #SDRAM_ALL_VAL]
+
+       ldr r1, SDRAM_AUTOREF_CMD_W
+       str r1, [r0, #ESDCTL1_ROF]
+       ldr r1, [r2, #SDRAM_ALL_VAL]
+       ldr r1, [r2, #SDRAM_ALL_VAL]
+
+       ldr r1, SDRAM_LOADMODE_CMD_W
+       str r1, [r0, #ESDCTL1_ROF]
+       ldrb r1, [r2, #SDRAM_MODE_REGISTER_VAL]
+       add r3, r2, #SDRAM_EXT_MODE_REGISTER_VAL
+       ldrb r1, [r3]
+
+       ldr r1, SDRAM_NORMAL_CMD_W
+       str r1, [r0, #ESDCTL1_ROF]
+#endif  /* CONFIG_NR_DRAM_BANKS > 1 */
+
+.endm /* sdram_init */
+
+.globl lowlevel_init
+lowlevel_init:
+
+       mov     r10, lr
+
+       init_aipi
+
+       init_clock
+
+       sdram_init
+
+       mov     pc,r10
index 9b4ff02610c087023a8fb95e9fd49d02c22f55cc..808371fb15dc48180c089fb42b6784aa475061cf 100644 (file)
@@ -264,3 +264,68 @@ void imx_gpio_mode(int gpio_mode)
                                &regs->port[port].iconfb2);
        }
 }
+
+#ifdef CONFIG_MXC_UART
+void mx27_uart_init_pins(void)
+{
+       int i;
+       unsigned int mode[] = {
+               PE12_PF_UART1_TXD,
+               PE13_PF_UART1_RXD,
+       };
+
+       for (i = 0; i < ARRAY_SIZE(mode); i++)
+               imx_gpio_mode(mode[i]);
+
+}
+#endif /* CONFIG_MXC_UART */
+
+#ifdef CONFIG_FEC_MXC
+void mx27_fec_init_pins(void)
+{
+       int i;
+       unsigned int mode[] = {
+               PD0_AIN_FEC_TXD0,
+               PD1_AIN_FEC_TXD1,
+               PD2_AIN_FEC_TXD2,
+               PD3_AIN_FEC_TXD3,
+               PD4_AOUT_FEC_RX_ER,
+               PD5_AOUT_FEC_RXD1,
+               PD6_AOUT_FEC_RXD2,
+               PD7_AOUT_FEC_RXD3,
+               PD8_AF_FEC_MDIO,
+               PD9_AIN_FEC_MDC | GPIO_PUEN,
+               PD10_AOUT_FEC_CRS,
+               PD11_AOUT_FEC_TX_CLK,
+               PD12_AOUT_FEC_RXD0,
+               PD13_AOUT_FEC_RX_DV,
+               PD14_AOUT_FEC_CLR,
+               PD15_AOUT_FEC_COL,
+               PD16_AIN_FEC_TX_ER,
+               PF23_AIN_FEC_TX_EN,
+       };
+
+       for (i = 0; i < ARRAY_SIZE(mode); i++)
+               imx_gpio_mode(mode[i]);
+}
+#endif /* CONFIG_FEC_MXC */
+
+#ifdef CONFIG_MXC_MMC
+void mx27_sd2_init_pins(void)
+{
+       int i;
+       unsigned int mode[] = {
+               PB4_PF_SD2_D0,
+               PB5_PF_SD2_D1,
+               PB6_PF_SD2_D2,
+               PB7_PF_SD2_D3,
+               PB8_PF_SD2_CMD,
+               PB9_PF_SD2_CLK,
+       };
+
+       for (i = 0; i < ARRAY_SIZE(mode); i++)
+               imx_gpio_mode(mode[i]);
+
+}
+#endif /* CONFIG_MXC_MMC */
+
index cff2b0e9195c35c7ff81065c8051cd653e68fc6e..d36a6da96d32142ffc381f89f5d0d13ae34915f7 100644 (file)
 
 extern void imx_gpio_mode (int gpio_mode);
 
+#ifdef CONFIG_MXC_UART
+extern void mx27_uart_init_pins(void);
+#endif /* CONFIG_MXC_UART */
+
+#ifdef CONFIG_FEC_MXC
+extern void mx27_fec_init_pins(void);
+#endif /* CONFIG_FEC_MXC */
+
+#ifdef CONFIG_MXC_MMC
+extern void mx27_sd2_init_pins(void);
+#endif /* CONFIG_MXC_MMC */
+
 /* AIPI */
 struct aipi_regs {
        u32 psr0;
diff --git a/include/configs/imx27lite.h b/include/configs/imx27lite.h
new file mode 100644 (file)
index 0000000..8ebb0bb
--- /dev/null
@@ -0,0 +1,252 @@
+/*
+ * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * SoC Configuration
+ */
+#define CONFIG_ARM926EJS                       /* arm926ejs CPU core */
+#define CONFIG_MX27
+#define CONFIG_IMX27LITE
+#define CONFIG_MX27_CLK32      32768           /* OSC32K frequency */
+#define CONFIG_SYS_HZ          1000
+
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_CMDLINE_TAG             1       /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS       1
+#define CONFIG_INITRD_TAG              1
+
+/*
+ * Lowlevel configuration
+ */
+#define SDRAM_ESDCFG_REGISTER_VAL(cas) \
+               (ESDCFG_TRC(10) |       \
+               ESDCFG_TRCD(3) |        \
+               ESDCFG_TCAS(cas) |      \
+               ESDCFG_TRRD(1) |        \
+               ESDCFG_TRAS(5) |        \
+               ESDCFG_TWR |            \
+               ESDCFG_TMRD(2) |        \
+               ESDCFG_TRP(2) |         \
+               ESDCFG_TXP(3))
+
+#define SDRAM_ESDCTL_REGISTER_VAL      \
+               (ESDCTL_PRCT(0) |       \
+                ESDCTL_BL |            \
+                ESDCTL_PWDT(0) |       \
+                ESDCTL_SREFR(3) |      \
+                ESDCTL_DSIZ_32 |       \
+                ESDCTL_COL10 |         \
+                ESDCTL_ROW13 |         \
+                ESDCTL_SDE)
+
+#define SDRAM_ALL_VAL          0xf00
+
+#define SDRAM_MODE_REGISTER_VAL        0x33    /* BL: 8, CAS: 3 */
+#define SDRAM_EXT_MODE_REGISTER_VAL    0x1000000
+
+#define MPCTL0_VAL     0x1ef15d5
+
+#define SPCTL0_VAL     0x043a1c09
+
+#define CSCR_VAL       0x33f08107
+
+#define PCDR0_VAL      0x120470c3
+#define PCDR1_VAL      0x03030303
+#define PCCR0_VAL      0xffffffff
+#define PCCR1_VAL      0xfffffffc
+
+#define AIPI1_PSR0_VAL 0x20040304
+#define AIPI1_PSR1_VAL 0xdffbfcfb
+#define AIPI2_PSR0_VAL 0x07ffc200
+#define AIPI2_PSR1_VAL 0xffffffff
+
+/*
+ * Memory Info
+ */
+/* malloc() len */
+#define CONFIG_SYS_MALLOC_LEN          (0x10000 + 512 * 1024)
+/* reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE       128
+/* memtest start address */
+#define CONFIG_SYS_MEMTEST_START       0xA0000000
+#define CONFIG_SYS_MEMTEST_END         0xA1000000      /* 16MB RAM test */
+#define CONFIG_NR_DRAM_BANKS   1               /* we have 1 bank of DRAM */
+#define CONFIG_STACKSIZE       (256 * 1024)    /* regular stack */
+#define PHYS_SDRAM_1           0xA0000000      /* DDR Start */
+#define PHYS_SDRAM_1_SIZE      0x08000000      /* DDR size 128MB */
+
+/*
+ * Serial Driver info
+ */
+#define CONFIG_MXC_UART
+#define CONFIG_SYS_MX27_UART1
+#define CONFIG_CONS_INDEX      1               /* use UART0 for console */
+#define CONFIG_BAUDRATE                115200          /* Default baud rate */
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Flash & Environment
+ */
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+/* Use buffered writes (~10x faster) */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE      1
+/* Use hardware sector protection */
+#define CONFIG_SYS_FLASH_PROTECTION            1
+#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max number of flash banks */
+#define CONFIG_SYS_FLASH_SECT_SZ       0x2000  /* 8KB sect size Intel Flash */
+/* end of flash */
+#define CONFIG_ENV_OFFSET              (PHYS_FLASH_SIZE - 0x20000)
+/* CS2 Base address */
+#define PHYS_FLASH_1                   0xc0000000
+/* Flash Base for U-Boot */
+#define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
+/* Flash size 2MB */
+#define PHYS_FLASH_SIZE                        0x200000
+#define CONFIG_SYS_MAX_FLASH_SECT      (PHYS_FLASH_SIZE / \
+               CONFIG_SYS_FLASH_SECT_SZ)
+#define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN         0x40000         /* Reserve 256KiB */
+#define CONFIG_ENV_SECT_SIZE           0x10000         /* Env sector Size */
+#define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
+/* Address and size of Redundant Environment Sector    */
+#define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
+
+/*
+ * Ethernet
+ */
+#define CONFIG_FEC_MXC
+#define CONFIG_FEC_MXC_PHYADDR         0x1f
+#define CONFIG_MII
+#define CONFIG_NET_MULTI
+
+/*
+ * MTD
+ */
+#define CONFIG_MTD_DEVICE
+
+/*
+ * NAND
+ */
+#define CONFIG_NAND_MXC
+#define CONFIG_MXC_NAND_REGS_BASE      0xd8000000
+#define CONFIG_SYS_MAX_NAND_DEVICE     1
+#define CONFIG_SYS_NAND_BASE           0xd8000000
+#define CONFIG_JFFS2_NAND
+#define CONFIG_MXC_NAND_HWECC
+
+/*
+ * SD/MMC
+ */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MXC_MMC
+#define CONFIG_MXC_MCI_REGS_BASE       0x10014000
+#define CONFIG_DOS_PARTITION
+
+/*
+ * MTD partitions
+ */
+#define CONFIG_CMD_MTDPARTS
+#define MTDIDS_DEFAULT         "nor0=physmap-flash.0,nand0=mxc_nand.0"
+#define MTDPARTS_DEFAULT                       \
+       "mtdparts="                             \
+               "physmap-flash.0:"              \
+                       "256k(U-Boot),"         \
+                       "1664k(user),"          \
+                       "64k(env1),"            \
+                       "64k(env2);"            \
+               "mxc_nand.0:"                   \
+                       "128k(IPL-SPL),"        \
+                       "4m(kernel),"           \
+                       "22m(rootfs),"          \
+                       "-(userfs)"
+
+/*
+ * U-Boot general configuration
+ */
+#define CONFIG_BOOTFILE                "uImage"        /* Boot file name */
+#define CONFIG_SYS_PROMPT      "=> "   /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE      1024    /* Console I/O Buffer Size  */
+/* Print buffer sz */
+#define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE + \
+               sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_LONGHELP
+
+/*
+ * U-Boot commands
+ */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+
+#define CONFIG_BOOTDELAY       5
+
+#define CONFIG_LOADADDR                0xa0800000      /* loadaddr env var */
+#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
+
+#define xstr(s)        str(s)
+#define str(s) #s
+
+#define        CONFIG_EXTRA_ENV_SETTINGS                                       \
+       "netdev=eth0\0"                                                 \
+       "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
+               "nfsroot=${serverip}:${rootpath}\0"                     \
+       "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
+       "addip=setenv bootargs ${bootargs} "                            \
+               "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
+               ":${hostname}:${netdev}:off panic=1\0"                  \
+       "addtty=setenv bootargs ${bootargs}"                            \
+               " console=ttymxc0,${baudrate}\0"                        \
+       "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
+       "addmisc=setenv bootargs ${bootargs}\0"                         \
+       "u-boot=imx27/u-boot.bin\0"                                     \
+       "kernel_addr_r=a0800000\0"                                      \
+       "hostname=imx27\0"                                              \
+       "bootfile=imx27/uImage\0"                                       \
+       "rootpath=/opt/eldk-4.2-arm/arm\0"                              \
+       "net_nfs=tftp ${kernel_addr_r} ${bootfile};"                    \
+               "run nfsargs addip addtty addmtd addmisc;"              \
+               "bootm\0"                                               \
+       "bootcmd=run net_nfs\0"                                 \
+       "load=tftp ${loadaddr} ${u-boot}\0"                             \
+       "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE)             \
+               " +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE)      \
+               " +${filesize};cp.b ${fileaddr} "                       \
+               xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"          \
+       "upd=run load update\0"                                         \
+
+#endif /* __CONFIG_H */