default y if ARCH_MESON
default y if ARCH_ROCKCHIP
default n
+ imply USE_BOOTCOMMAND
select CMD_BOOTZ if ARM && !ARM64
select CMD_BOOTI if ARM64
select CMD_DHCP
u-boot.rom: u-boot-x86-16bit.bin u-boot.bin \
$(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
- $(if $(CONFIG_HAVE_REFCODE),refcode.bin) checkbinman FORCE
+ $(if $(CONFIG_HAVE_REFCODE),refcode.bin) FORCE
$(call if_changed,binman)
OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
endif
ifneq ($(CONFIG_ARCH_SUNXI),)
-u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb \
- checkbinman FORCE
+u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE
$(call if_changed,binman)
endif
$(timestamp_h): $(srctree)/Makefile FORCE
$(call filechk,timestamp.h)
-checkbinman: tools
- @if ! ( echo 'import libfdt' | ( PYTHONPATH=tools $(PYTHON) )); then \
- echo >&2; \
- echo >&2 '*** binman needs the Python libfdt library.'; \
- echo >&2 '*** Either install it on your system, or try:'; \
- echo >&2 '***'; \
- echo >&2 '*** sudo apt-get install swig libpython-dev'; \
- echo >&2 '***'; \
- echo >&2 '*** to have U-Boot build its own version.'; \
- false; \
- fi
-
# ---------------------------------------------------------------------------
quiet_cmd_cpp_lds = LDS $@
cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \
select PHYS_64BIT
select SYS_CACHE_SHIFT_6
+if ARM64
+config POSITION_INDEPENDENT
+ bool "Generate position-independent pre-relocation code"
+ help
+ U-Boot expects to be linked to a specific hard-coded address, and to
+ be loaded to and run from that address. This option lifts that
+ restriction, thus allowing the code to be loaded to and executed
+ from almost any address. This logic relies on the relocation
+ information that is embedded into the binary to support U-Boot
+ relocating itself to the top-of-RAM later during execution.
+endif
+
+config STATIC_RELA
+ bool
+ default y if ARM64 && !POSITION_INDEPENDENT
+
config DMA_ADDR_T_64BIT
bool
default y if ARM64
config ARCH_SUNXI
bool "Support sunxi (Allwinner) SoCs"
+ select BINMAN
select CMD_GPIO
select CMD_MMC if MMC
select CMD_USB if DISTRO_DEFAULTS
select ARMV8_MULTIENTRY
select ARCH_MISC_INIT
select BOARD_LATE_INIT
+ select SUPPORT_SPL
help
Support for NXP LS1088AQDS platform
The LS1088A Development System (QDS) is a high-performance
select ARMV8_MULTIENTRY
select ARCH_MISC_INIT
select BOARD_LATE_INIT
+ select SUPPORT_SPL
help
Support for NXP LS1088ARDB platform.
The LS1088A Reference design board (RDB) is a high-performance
select FSL_TZASC_1
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
+ imply SCSI
config ARCH_LS2080A
bool
mcboottimeout: MC boot timeout in milliseconds. If this variable is not defined
the value CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS will be assumed.
-mcmemsize: MC DRAM block size. If this variable is not defined, the value
+mcmemsize: MC DRAM block size in hex. If this variable is not defined, the value
CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE will be assumed.
mcinitcmd: This environment variable is defined to initiate MC and DPL deployment
Notice the difference from QDS is SRC, SRC_ADDR and the offset of u-boot image
to match board NAND device with 4KB/page, block size 512KB.
+Booting from SD/eMMC
+-------------------
+Booting from SD/eMMC requires two images, RCW and u-boot-with-spl.bin.
+The difference between SD boot RCW image and QSPI-NOR boot image is the
+PBI command sequence. Below is one example for PBI commands for RDB
+and QDS which uses SD device with block size 512. Block location can be
+calculated by dividing offset with block size.
+
+1) Block Copy: SRC=0x0040, SRC_ADDR=0x00100000, DEST_ADDR=0x1800a000,
+BLOCK_SIZE=0x00016000
+
+This command copies u-boot image from SD device into OCRAM. The values
+need to adjust accordingly for SD/eMMC
+
+SRC should match the cfg_rcw_src, the reset config pins.
+ The value for source(SRC) can be 0x0040 or 0x0041
+ depending upon SD or eMMC.
+SRC_ADDR is the offset of u-boot-with-spl.bin image in SD device.
+ In the example above, 1MB. This is same as QSPI-NOR.
+DEST_ADDR is configured at 0x1800a000, matching bootloc set above.
+BLOCK_SIZE is the size to be copied by PBI.
+
+2) CCSR 4-byte write to 0x01e00404, data=0x00000000
+3) CCSR 4-byte write to 0x01e00400, data=0x1800a000
+The above two commands set bootloc register to 0x00000000_1800a000 where
+the u-boot code will be running in OCRAM.
+
+
+RCW image should be written at 8th block of device(SD/eMMC). Example of
+using u-boot command
+
+mmc erase 0x8 0x10
+mmc write <rcw image in memory> 0x8 <size of rcw in block count typical value=10>
+
+To form the SD-Boot image, build u-boot with SD config, for example,
+ls1088ardb_sdcard_qspi_defconfig. The image needed is u-boot-with-spl.bin.
+The u-boot image should be written to match SRC_ADDR, in above example
+offset 0x100000 in other work it means block location 0x800
+
+mmc erase 0x800 0x1800
+mmc write <u-boot image in memory> 0x800 <size of u-boot image in block count>
+
+With these two images in SD/eMMC device, the board can boot from SD/eMMC.
+
MMU Translation Tables
======================
.globl save_boot_params_ret
save_boot_params_ret:
+#if CONFIG_POSITION_INDEPENDENT
+ /*
+ * Fix .rela.dyn relocations. This allows U-Boot to be loaded to and
+ * executed at a different address than it was linked at.
+ */
+pie_fixup:
+ adr x0, _start /* x0 <- Runtime value of _start */
+ ldr x1, _TEXT_BASE /* x1 <- Linked value of _start */
+ sub x9, x0, x1 /* x9 <- Run-vs-link offset */
+ adr x2, __rel_dyn_start /* x2 <- Runtime &__rel_dyn_start */
+ adr x3, __rel_dyn_end /* x3 <- Runtime &__rel_dyn_end */
+pie_fix_loop:
+ ldp x0, x1, [x2], #16 /* (x0, x1) <- (Link location, fixup) */
+ ldr x4, [x2], #8 /* x4 <- addend */
+ cmp w1, #1027 /* relative fixup? */
+ bne pie_skip_reloc
+ /* relative fix: store addend plus offset at dest location */
+ add x0, x0, x9
+ add x4, x4, x9
+ str x4, [x0]
+pie_skip_reloc:
+ cmp x2, x3
+ b.lo pie_fix_loop
+pie_fixup_done:
+#endif
+
#ifdef CONFIG_SYS_RESET_SCTRL
bl reset_sctrl
#endif
rk3399-puma-ddr1866.dtb \
rv1108-evb.dtb
dtb-$(CONFIG_ARCH_MESON) += \
- meson-gxbb-odroidc2.dtb
+ meson-gxbb-odroidc2.dtb \
+ meson-gxl-s905x-p212.dtb
dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
tegra20-medcom-wide.dtb \
tegra20-paz00.dtb \
ethernet1 = ð0;
ethernet2 = ð1;
ethernet3 = ð2;
+ spi1 = &spi1;
};
chosen {
status = "okay";
};
- spi@10680 {
+ spi1: spi@10680 {
/*
- * We don't seem to have the W25Q32 on the
- * A1 Rev 2.0 boards, so disable SPI.
- * CS0: W25Q32 (doesn't appear to be present)
+ * CS0: W25Q32
* CS1:
* CS2: mikrobus
*/
spi-flash@0 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "w25q32", "jedec,spi-nor";
+ compatible = "w25q32", "jedec,spi-nor", "spi-flash";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <3000000>;
- status = "disabled";
};
};
* SPDX-License-Identifier: GPL-2.0+
*/
+/ {
+ config {
+ u-boot,mmc-env-partition = "boot";
+ };
+};
+
+
&pm8916_gpios {
usb_hub_reset_pm {
gpios = <&pm8916_gpios 2 0>;
};
scpi_sensors: sensors {
- compatible = "arm,scpi-sensors";
+ compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
#thermal-sensor-cells = <1>;
};
};
status = "disabled";
};
+ spicc: spi@8d80 {
+ compatible = "amlogic,meson-gx-spicc";
+ reg = <0x0 0x08d80 0x0 0x80>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
spifc: spi@8c80 {
compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc";
reg = <0x0 0x08c80 0x0 0x80>;
};
pwm_AO_ab: pwm@550 {
- compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+ compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm";
reg = <0x0 0x00550 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
};
-&scpi_clocks {
- status = "disabled";
-};
-
-&uart_AO {
- status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
-};
-
ðmac {
status = "okay";
pinctrl-0 = <ð_rgmii_pins>;
};
};
+&gpio_ao {
+ /*
+ * WARNING: The USB Hub on the Odroid-C2 needs a reset signal
+ * to be turned high in order to be detected by the USB Controller
+ * This signal should be handled by a USB specific power sequence
+ * in order to reset the Hub when USB bus is powered down.
+ */
+ usb-hub {
+ gpio-hog;
+ gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "usb-hub-reset";
+ };
+};
+
+&i2c_A {
+ status = "okay";
+ pinctrl-0 = <&i2c_a_pins>;
+ pinctrl-names = "default";
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
&pinctrl_aobus {
gpio-line-names = "UART TX", "UART RX", "VCCK En", "TF 3V3/1V8 En",
"USB HUB nRESET", "USB OTG Power En",
"";
};
-&ir {
- status = "okay";
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
-};
-
-&i2c_A {
- status = "okay";
- pinctrl-0 = <&i2c_a_pins>;
- pinctrl-names = "default";
-};
-
-&gpio_ao {
- /*
- * WARNING: The USB Hub on the Odroid-C2 needs a reset signal
- * to be turned high in order to be detected by the USB Controller
- * This signal should be handled by a USB specific power sequence
- * in order to reset the Hub when USB bus is powered down.
- */
- usb-hub {
- gpio-hog;
- gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "usb-hub-reset";
- };
-};
-
-&usb0_phy {
- status = "okay";
- phy-supply = <&usb_otg_pwr>;
-};
-
-&usb1_phy {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
-
-&usb1 {
- status = "okay";
-};
-
&saradc {
status = "okay";
vref-supply = <&vcc1v8>;
};
+&scpi_clocks {
+ status = "disabled";
+};
+
/* SD */
&sd_emmc_b {
status = "okay";
vmmc-supply = <&vcc3v3>;
vqmmc-supply = <&vcc1v8>;
};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+&usb0_phy {
+ status = "okay";
+ phy-supply = <&usb_otg_pwr>;
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
};
};
-ðmac {
- clocks = <&clkc CLKID_ETH>,
- <&clkc CLKID_FCLK_DIV2>,
- <&clkc CLKID_MPLL2>;
- clock-names = "stmmaceth", "clkin0", "clkin1";
-};
-
&aobus {
pinctrl_aobus: pinctrl@14 {
compatible = "amlogic,meson-gxbb-aobus-pinctrl";
function = "spdif_out_ao";
};
};
+
+ ao_cec_pins: ao_cec {
+ mux {
+ groups = "ao_cec";
+ function = "cec_ao";
+ };
+ };
+
+ ee_cec_pins: ee_cec {
+ mux {
+ groups = "ee_cec";
+ function = "cec_ao";
+ };
+ };
+ };
+};
+
+&apb {
+ mali: gpu@c0000 {
+ compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
+ reg = <0x0 0xc0000 0x0 0x40000>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp", "gpmmu", "pp", "pmu",
+ "pp0", "ppmmu0", "pp1", "ppmmu1",
+ "pp2", "ppmmu2";
+ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+ clock-names = "bus", "core";
+
+ /*
+ * Mali clocking is provided by two identical clock paths
+ * MALI_0 and MALI_1 muxed to a single clock by a glitch
+ * free mux to safely change frequency while running.
+ */
+ assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
+ <&clkc CLKID_MALI_0>,
+ <&clkc CLKID_MALI>; /* Glitch free mux */
+ assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+ <0>, /* Do Nothing */
+ <&clkc CLKID_MALI_0>;
+ assigned-clock-rates = <0>, /* Do Nothing */
+ <666666666>,
+ <0>; /* Do Nothing */
+ };
+};
+
+&cbus {
+ spifc: spi@8c80 {
+ compatible = "amlogic,meson-gxbb-spifc";
+ reg = <0x0 0x08c80 0x0 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_SPI>;
+ status = "disabled";
+ };
+};
+
+ðmac {
+ clocks = <&clkc CLKID_ETH>,
+ <&clkc CLKID_FCLK_DIV2>,
+ <&clkc CLKID_MPLL2>;
+ clock-names = "stmmaceth", "clkin0", "clkin1";
+};
+
+&hdmi_tx {
+ compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+ resets = <&reset RESET_HDMITX_CAPB3>,
+ <&reset RESET_HDMI_SYSTEM_RESET>,
+ <&reset RESET_HDMI_TX>;
+ reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+ clocks = <&clkc CLKID_HDMI_PCLK>,
+ <&clkc CLKID_CLK81>,
+ <&clkc CLKID_GCLK_VENCI_INT0>;
+ clock-names = "isfr", "iahb", "venci";
+};
+
+&hiubus {
+ clkc: clock-controller@0 {
+ compatible = "amlogic,gxbb-clkc";
+ #clock-cells = <1>;
+ reg = <0x0 0x0 0x0 0x3db>;
};
};
+&hwrng {
+ clocks = <&clkc CLKID_RNG0>;
+ clock-names = "core";
+};
+
+&i2c_A {
+ clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_AO {
+ clocks = <&clkc CLKID_AO_I2C>;
+};
+
+&i2c_B {
+ clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_C {
+ clocks = <&clkc CLKID_I2C>;
+};
+
&periphs {
pinctrl_periphs: pinctrl@4b0 {
compatible = "amlogic,meson-gxbb-periphs-pinctrl";
gpio: bank@4b0 {
reg = <0x0 0x004b0 0x0 0x28>,
<0x0 0x004e8 0x0 0x14>,
- <0x0 0x00120 0x0 0x14>,
+ <0x0 0x00520 0x0 0x14>,
<0x0 0x00430 0x0 0x40>;
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
};
};
+ spi_pins: spi {
+ mux {
+ groups = "spi_miso",
+ "spi_mosi",
+ "spi_sclk";
+ function = "spi";
+ };
+ };
+
+ spi_ss0_pins: spi-ss0 {
+ mux {
+ groups = "spi_ss0";
+ function = "spi";
+ };
+ };
+
sdcard_pins: sdcard {
mux {
groups = "sdcard_d0",
};
};
-&hiubus {
- clkc: clock-controller@0 {
- compatible = "amlogic,gxbb-clkc";
- #clock-cells = <1>;
- reg = <0x0 0x0 0x0 0x3db>;
- };
-};
-
-&apb {
- mali: gpu@c0000 {
- compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
- reg = <0x0 0xc0000 0x0 0x40000>;
- interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "gp", "gpmmu", "pp", "pmu",
- "pp0", "ppmmu0", "pp1", "ppmmu1",
- "pp2", "ppmmu2";
- clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
- clock-names = "bus", "core";
-
- /*
- * Mali clocking is provided by two identical clock paths
- * MALI_0 and MALI_1 muxed to a single clock by a glitch
- * free mux to safely change frequency while running.
- */
- assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
- <&clkc CLKID_MALI_0>,
- <&clkc CLKID_MALI>; /* Glitch free mux */
- assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
- <0>, /* Do Nothing */
- <&clkc CLKID_MALI_0>;
- assigned-clock-rates = <0>, /* Do Nothing */
- <666666666>,
- <0>; /* Do Nothing */
- };
-};
-
-&i2c_A {
- clocks = <&clkc CLKID_I2C>;
-};
-
-&i2c_AO {
- clocks = <&clkc CLKID_AO_I2C>;
-};
-
-&i2c_B {
- clocks = <&clkc CLKID_I2C>;
-};
-
-&i2c_C {
- clocks = <&clkc CLKID_I2C>;
-};
-
&saradc {
compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
clocks = <&xtal>,
clock-names = "core", "clkin0", "clkin1";
};
+&spicc {
+ clocks = <&clkc CLKID_SPICC>;
+ clock-names = "core";
+ resets = <&reset RESET_PERIPHS_SPICC>;
+ num-cs = <1>;
+};
+
&spifc {
clocks = <&clkc CLKID_SPI>;
};
&vpu {
compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
};
-
-&hwrng {
- clocks = <&clkc CLKID_RNG0>;
- clock-names = "core";
-};
-
-&hdmi_tx {
- compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
- resets = <&reset RESET_HDMITX_CAPB3>,
- <&reset RESET_HDMI_SYSTEM_RESET>,
- <&reset RESET_HDMI_TX>;
- reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
- clocks = <&clkc CLKID_HDMI_PCLK>,
- <&clkc CLKID_CLK81>,
- <&clkc CLKID_GCLK_VENCI_INT0>;
- clock-names = "isfr", "iahb", "venci";
-};
--- /dev/null
+/*
+ * Copyright (c) 2017 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+&apb {
+ mali: gpu@c0000 {
+ compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
+ reg = <0x0 0xc0000 0x0 0x40000>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp", "gpmmu", "pp", "pmu",
+ "pp0", "ppmmu0", "pp1", "ppmmu1",
+ "pp2", "ppmmu2";
+ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+ clock-names = "bus", "core";
+
+ /*
+ * Mali clocking is provided by two identical clock paths
+ * MALI_0 and MALI_1 muxed to a single clock by a glitch
+ * free mux to safely change frequency while running.
+ */
+ assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
+ <&clkc CLKID_MALI_0>,
+ <&clkc CLKID_MALI>; /* Glitch free mux */
+ assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+ <0>, /* Do Nothing */
+ <&clkc CLKID_MALI_0>;
+ assigned-clock-rates = <0>, /* Do Nothing */
+ <666666666>,
+ <0>; /* Do Nothing */
+ };
+};
--- /dev/null
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x-p212.dtsi"
+
+/ {
+ compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
+ model = "Amlogic Meson GXL (S905X) P212 Development Board";
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ * Based on meson-gx-p23x-q20x.dtsi:
+ * - Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ * - Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/* Common DTSI for devices which are based on the P212 reference board. */
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart_AO;
+ serial1 = &uart_A;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ vddio_boot: regulator-vddio_boot {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vddio_ao18: regulator-vddio_ao18 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcc_3v3: regulator-vcc_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi32k: wifi32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+ clocks = <&wifi32k>;
+ clock-names = "ext_clock";
+ };
+};
+
+ðmac {
+ status = "okay";
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+ status = "okay";
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+
+ non-removable;
+ disable-wp;
+
+ mmc-pwrseq = <&sdio_pwrseq>;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+/* SD card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <8>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
--- /dev/null
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "meson-gxl.dtsi"
+#include "meson-gxl-mali.dtsi"
+
+/ {
+ compatible = "amlogic,s905x", "amlogic,meson-gxl";
+};
+
+/* S905X only has access to its internal PHY */
+ðmac {
+ phy-mode = "rmii";
+ phy-handle = <&internal_phy>;
+};
--- /dev/null
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "meson-gx.dtsi"
+#include <dt-bindings/clock/gxbb-clkc.h>
+#include <dt-bindings/gpio/meson-gxl-gpio.h>
+#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
+
+/ {
+ compatible = "amlogic,meson-gxl";
+};
+
+ðmac {
+ reg = <0x0 0xc9410000 0x0 0x10000
+ 0x0 0xc8834540 0x0 0x4>;
+
+ clocks = <&clkc CLKID_ETH>,
+ <&clkc CLKID_FCLK_DIV2>,
+ <&clkc CLKID_MPLL2>;
+ clock-names = "stmmaceth", "clkin0", "clkin1";
+
+ mdio0: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ };
+};
+
+&aobus {
+ pinctrl_aobus: pinctrl@14 {
+ compatible = "amlogic,meson-gxl-aobus-pinctrl";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpio_ao: bank@14 {
+ reg = <0x0 0x00014 0x0 0x8>,
+ <0x0 0x0002c 0x0 0x4>,
+ <0x0 0x00024 0x0 0x8>;
+ reg-names = "mux", "pull", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_aobus 0 0 14>;
+ };
+
+ uart_ao_a_pins: uart_ao_a {
+ mux {
+ groups = "uart_tx_ao_a", "uart_rx_ao_a";
+ function = "uart_ao";
+ };
+ };
+
+ uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
+ mux {
+ groups = "uart_cts_ao_a",
+ "uart_rts_ao_a";
+ function = "uart_ao";
+ };
+ };
+
+ uart_ao_b_pins: uart_ao_b {
+ mux {
+ groups = "uart_tx_ao_b", "uart_rx_ao_b";
+ function = "uart_ao_b";
+ };
+ };
+
+ uart_ao_b_0_1_pins: uart_ao_b_0_1 {
+ mux {
+ groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1";
+ function = "uart_ao_b";
+ };
+ };
+
+ uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
+ mux {
+ groups = "uart_cts_ao_b",
+ "uart_rts_ao_b";
+ function = "uart_ao_b";
+ };
+ };
+
+ remote_input_ao_pins: remote_input_ao {
+ mux {
+ groups = "remote_input_ao";
+ function = "remote_input_ao";
+ };
+ };
+
+ i2c_ao_pins: i2c_ao {
+ mux {
+ groups = "i2c_sck_ao",
+ "i2c_sda_ao";
+ function = "i2c_ao";
+ };
+ };
+
+ pwm_ao_a_3_pins: pwm_ao_a_3 {
+ mux {
+ groups = "pwm_ao_a_3";
+ function = "pwm_ao_a";
+ };
+ };
+
+ pwm_ao_a_8_pins: pwm_ao_a_8 {
+ mux {
+ groups = "pwm_ao_a_8";
+ function = "pwm_ao_a";
+ };
+ };
+
+ pwm_ao_b_pins: pwm_ao_b {
+ mux {
+ groups = "pwm_ao_b";
+ function = "pwm_ao_b";
+ };
+ };
+
+ pwm_ao_b_6_pins: pwm_ao_b_6 {
+ mux {
+ groups = "pwm_ao_b_6";
+ function = "pwm_ao_b";
+ };
+ };
+
+ i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
+ mux {
+ groups = "i2s_out_ch23_ao";
+ function = "i2s_out_ao";
+ };
+ };
+
+ i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
+ mux {
+ groups = "i2s_out_ch45_ao";
+ function = "i2s_out_ao";
+ };
+ };
+
+ spdif_out_ao_6_pins: spdif_out_ao_6 {
+ mux {
+ groups = "spdif_out_ao_6";
+ function = "spdif_out_ao";
+ };
+ };
+
+ spdif_out_ao_9_pins: spdif_out_ao_9 {
+ mux {
+ groups = "spdif_out_ao_9";
+ function = "spdif_out_ao";
+ };
+ };
+
+ ao_cec_pins: ao_cec {
+ mux {
+ groups = "ao_cec";
+ function = "cec_ao";
+ };
+ };
+
+ ee_cec_pins: ee_cec {
+ mux {
+ groups = "ee_cec";
+ function = "cec_ao";
+ };
+ };
+ };
+};
+
+&hdmi_tx {
+ compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+ resets = <&reset RESET_HDMITX_CAPB3>,
+ <&reset RESET_HDMI_SYSTEM_RESET>,
+ <&reset RESET_HDMI_TX>;
+ reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+ clocks = <&clkc CLKID_HDMI_PCLK>,
+ <&clkc CLKID_CLK81>,
+ <&clkc CLKID_GCLK_VENCI_INT0>;
+ clock-names = "isfr", "iahb", "venci";
+};
+
+&hiubus {
+ clkc: clock-controller@0 {
+ compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc";
+ #clock-cells = <1>;
+ reg = <0x0 0x0 0x0 0x3db>;
+ };
+};
+
+&i2c_A {
+ clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_AO {
+ clocks = <&clkc CLKID_AO_I2C>;
+};
+
+&i2c_B {
+ clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_C {
+ clocks = <&clkc CLKID_I2C>;
+};
+
+&periphs {
+ pinctrl_periphs: pinctrl@4b0 {
+ compatible = "amlogic,meson-gxl-periphs-pinctrl";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpio: bank@4b0 {
+ reg = <0x0 0x004b0 0x0 0x28>,
+ <0x0 0x004e8 0x0 0x14>,
+ <0x0 0x00520 0x0 0x14>,
+ <0x0 0x00430 0x0 0x40>;
+ reg-names = "mux", "pull", "pull-enable", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_periphs 0 10 101>;
+ };
+
+ emmc_pins: emmc {
+ mux {
+ groups = "emmc_nand_d07",
+ "emmc_cmd",
+ "emmc_clk",
+ "emmc_ds";
+ function = "emmc";
+ };
+ };
+
+ nor_pins: nor {
+ mux {
+ groups = "nor_d",
+ "nor_q",
+ "nor_c",
+ "nor_cs";
+ function = "nor";
+ };
+ };
+
+ spi_pins: spi {
+ mux {
+ groups = "spi_miso",
+ "spi_mosi",
+ "spi_sclk";
+ function = "spi";
+ };
+ };
+
+ spi_ss0_pins: spi-ss0 {
+ mux {
+ groups = "spi_ss0";
+ function = "spi";
+ };
+ };
+
+ sdcard_pins: sdcard {
+ mux {
+ groups = "sdcard_d0",
+ "sdcard_d1",
+ "sdcard_d2",
+ "sdcard_d3",
+ "sdcard_cmd",
+ "sdcard_clk";
+ function = "sdcard";
+ };
+ };
+
+ sdio_pins: sdio {
+ mux {
+ groups = "sdio_d0",
+ "sdio_d1",
+ "sdio_d2",
+ "sdio_d3",
+ "sdio_cmd",
+ "sdio_clk";
+ function = "sdio";
+ };
+ };
+
+ sdio_irq_pins: sdio_irq {
+ mux {
+ groups = "sdio_irq";
+ function = "sdio";
+ };
+ };
+
+ uart_a_pins: uart_a {
+ mux {
+ groups = "uart_tx_a",
+ "uart_rx_a";
+ function = "uart_a";
+ };
+ };
+
+ uart_a_cts_rts_pins: uart_a_cts_rts {
+ mux {
+ groups = "uart_cts_a",
+ "uart_rts_a";
+ function = "uart_a";
+ };
+ };
+
+ uart_b_pins: uart_b {
+ mux {
+ groups = "uart_tx_b",
+ "uart_rx_b";
+ function = "uart_b";
+ };
+ };
+
+ uart_b_cts_rts_pins: uart_b_cts_rts {
+ mux {
+ groups = "uart_cts_b",
+ "uart_rts_b";
+ function = "uart_b";
+ };
+ };
+
+ uart_c_pins: uart_c {
+ mux {
+ groups = "uart_tx_c",
+ "uart_rx_c";
+ function = "uart_c";
+ };
+ };
+
+ uart_c_cts_rts_pins: uart_c_cts_rts {
+ mux {
+ groups = "uart_cts_c",
+ "uart_rts_c";
+ function = "uart_c";
+ };
+ };
+
+ i2c_a_pins: i2c_a {
+ mux {
+ groups = "i2c_sck_a",
+ "i2c_sda_a";
+ function = "i2c_a";
+ };
+ };
+
+ i2c_b_pins: i2c_b {
+ mux {
+ groups = "i2c_sck_b",
+ "i2c_sda_b";
+ function = "i2c_b";
+ };
+ };
+
+ i2c_c_pins: i2c_c {
+ mux {
+ groups = "i2c_sck_c",
+ "i2c_sda_c";
+ function = "i2c_c";
+ };
+ };
+
+ eth_pins: eth_c {
+ mux {
+ groups = "eth_mdio",
+ "eth_mdc",
+ "eth_clk_rx_clk",
+ "eth_rx_dv",
+ "eth_rxd0",
+ "eth_rxd1",
+ "eth_rxd2",
+ "eth_rxd3",
+ "eth_rgmii_tx_clk",
+ "eth_tx_en",
+ "eth_txd0",
+ "eth_txd1",
+ "eth_txd2",
+ "eth_txd3";
+ function = "eth";
+ };
+ };
+
+ eth_link_led_pins: eth_link_led {
+ mux {
+ groups = "eth_link_led";
+ function = "eth_led";
+ };
+ };
+
+ eth_act_led_pins: eth_act_led {
+ mux {
+ groups = "eth_act_led";
+ function = "eth_led";
+ };
+ };
+
+ pwm_a_pins: pwm_a {
+ mux {
+ groups = "pwm_a";
+ function = "pwm_a";
+ };
+ };
+
+ pwm_b_pins: pwm_b {
+ mux {
+ groups = "pwm_b";
+ function = "pwm_b";
+ };
+ };
+
+ pwm_c_pins: pwm_c {
+ mux {
+ groups = "pwm_c";
+ function = "pwm_c";
+ };
+ };
+
+ pwm_d_pins: pwm_d {
+ mux {
+ groups = "pwm_d";
+ function = "pwm_d";
+ };
+ };
+
+ pwm_e_pins: pwm_e {
+ mux {
+ groups = "pwm_e";
+ function = "pwm_e";
+ };
+ };
+
+ pwm_f_clk_pins: pwm_f_clk {
+ mux {
+ groups = "pwm_f_clk";
+ function = "pwm_f";
+ };
+ };
+
+ pwm_f_x_pins: pwm_f_x {
+ mux {
+ groups = "pwm_f_x";
+ function = "pwm_f";
+ };
+ };
+
+ hdmi_hpd_pins: hdmi_hpd {
+ mux {
+ groups = "hdmi_hpd";
+ function = "hdmi_hpd";
+ };
+ };
+
+ hdmi_i2c_pins: hdmi_i2c {
+ mux {
+ groups = "hdmi_sda", "hdmi_scl";
+ function = "hdmi_i2c";
+ };
+ };
+
+ i2s_am_clk_pins: i2s_am_clk {
+ mux {
+ groups = "i2s_am_clk";
+ function = "i2s_out";
+ };
+ };
+
+ i2s_out_ao_clk_pins: i2s_out_ao_clk {
+ mux {
+ groups = "i2s_out_ao_clk";
+ function = "i2s_out";
+ };
+ };
+
+ i2s_out_lr_clk_pins: i2s_out_lr_clk {
+ mux {
+ groups = "i2s_out_lr_clk";
+ function = "i2s_out";
+ };
+ };
+
+ i2s_out_ch01_pins: i2s_out_ch01 {
+ mux {
+ groups = "i2s_out_ch01";
+ function = "i2s_out";
+ };
+ };
+ i2sout_ch23_z_pins: i2sout_ch23_z {
+ mux {
+ groups = "i2sout_ch23_z";
+ function = "i2s_out";
+ };
+ };
+
+ i2sout_ch45_z_pins: i2sout_ch45_z {
+ mux {
+ groups = "i2sout_ch45_z";
+ function = "i2s_out";
+ };
+ };
+
+ i2sout_ch67_z_pins: i2sout_ch67_z {
+ mux {
+ groups = "i2sout_ch67_z";
+ function = "i2s_out";
+ };
+ };
+
+ spdif_out_h_pins: spdif_out_ao_h {
+ mux {
+ groups = "spdif_out_h";
+ function = "spdif_out";
+ };
+ };
+ };
+
+ eth-phy-mux {
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x55c 0x0 0x4>;
+ mux-mask = <0xffffffff>;
+ mdio-parent-bus = <&mdio0>;
+
+ internal_mdio: mdio@e40908ff {
+ reg = <0xe40908ff>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ internal_phy: ethernet-phy@8 {
+ compatible = "ethernet-phy-id0181.4400", "ethernet-phy-ieee802.3-c22";
+ reg = <8>;
+ max-speed = <100>;
+ };
+ };
+
+ external_mdio: mdio@2009087f {
+ reg = <0x2009087f>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&saradc {
+ compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
+ clocks = <&xtal>,
+ <&clkc CLKID_SAR_ADC>,
+ <&clkc CLKID_SANA>,
+ <&clkc CLKID_SAR_ADC_CLK>,
+ <&clkc CLKID_SAR_ADC_SEL>;
+ clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
+};
+
+&sd_emmc_a {
+ clocks = <&clkc CLKID_SD_EMMC_A>,
+ <&xtal>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+};
+
+&sd_emmc_b {
+ clocks = <&clkc CLKID_SD_EMMC_B>,
+ <&xtal>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+};
+
+&sd_emmc_c {
+ clocks = <&clkc CLKID_SD_EMMC_C>,
+ <&xtal>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+};
+
+&spicc {
+ clocks = <&clkc CLKID_SPICC>;
+ clock-names = "core";
+ resets = <&reset RESET_PERIPHS_SPICC>;
+ num-cs = <1>;
+};
+
+&spifc {
+ clocks = <&clkc CLKID_SPI>;
+};
+
+&vpu {
+ compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
+};
#define DDR_CONTROL_BASE_ADDR 0x44E11404
/* UART */
-#define DEFAULT_UART_BASE UART0_BASE
+#if CONFIG_CONS_INDEX == 1
+# define DEFAULT_UART_BASE UART0_BASE
+#elif CONFIG_CONS_INDEX == 2
+# define DEFAULT_UART_BASE UART1_BASE
+#elif CONFIG_CONS_INDEX == 3
+# define DEFAULT_UART_BASE UART2_BASE
+#elif CONFIG_CONS_INDEX == 4
+# define DEFAULT_UART_BASE UART3_BASE
+#elif CONFIG_CONS_INDEX == 5
+# define DEFAULT_UART_BASE UART4_BASE
+#elif CONFIG_CONS_INDEX == 6
+# define DEFAULT_UART_BASE UART5_BASE
+#endif
/* GPMC Base address */
#define GPMC_BASE 0x50000000
/* UART Base Address */
#define UART0_BASE 0x44E09000
+#define UART1_BASE 0x48022000
+#define UART2_BASE 0x48024000
+#define UART3_BASE 0x481A6000
+#define UART4_BASE 0x481A8000
+#define UART5_BASE 0x481AA000
/* GPIO Base address */
#define GPIO2_BASE 0x481AC000
#endif
void am33xx_spl_board_init(void);
int am335x_get_efuse_mpu_max_freq(struct ctrl_dev *cdev);
+int am335x_get_mpu_vdd(int sil_rev, int frequency);
int am335x_get_tps65910_mpu_vdd(int sil_rev, int frequency);
#endif
#define GXBB_ETH_REG_0 GXBB_PERIPHS_ADDR(0x50)
#define GXBB_ETH_REG_1 GXBB_PERIPHS_ADDR(0x51)
+#define GXBB_ETH_REG_2 GXBB_PERIPHS_ADDR(0x56)
+#define GXBB_ETH_REG_3 GXBB_PERIPHS_ADDR(0x57)
#define GXBB_ETH_REG_0_PHY_INTF BIT(0)
#define GXBB_ETH_REG_0_TX_PHASE(x) (((x) & 3) << 5)
#define GXBB_ETH_REG_0_TX_RATIO(x) (((x) & 7) << 7)
#define GXBB_ETH_REG_0_PHY_CLK_EN BIT(10)
+#define GXBB_ETH_REG_0_INVERT_RMII_CLK BIT(11)
#define GXBB_ETH_REG_0_CLK_EN BIT(12)
/* HIU registers */
#define CONFIG_LMB
#define CONFIG_SYS_BOOT_RAMDISK_HIGH
-#ifdef CONFIG_ARM64
-#define CONFIG_STATIC_RELA
-#endif
-
#if defined(CONFIG_ARCH_LS1021A) || \
defined(CONFIG_CPU_PXA27X) || \
defined(CONFIG_CPU_MONAHANS) || \
ldr x18, [x18, #GD_NEW_GD] /* x18 <- gd->new_gd */
adr lr, relocation_return
+#if CONFIG_POSITION_INDEPENDENT
+ /* Add in link-vs-runtime offset */
+ adr x0, _start /* x0 <- Runtime value of _start */
+ ldr x9, _TEXT_BASE /* x9 <- Linked value of _start */
+ sub x9, x9, x0 /* x9 <- Run-vs-link offset */
+ add lr, lr, x9
+#endif
+ /* Add in link-vs-relocation offset */
ldr x9, [x18, #GD_RELOC_OFF] /* x9 <- gd->reloc_off */
add lr, lr, x9 /* new return address after relocation */
ldr x0, [x18, #GD_RELOCADDR] /* x0 <- gd->relocaddr */
#endif /* !CONFIG_SPL_BUILD */
#if defined(CONFIG_SPL_BUILD)
bl spl_relocate_stack_gd /* may return NULL */
+ /* set up gd here, outside any C code */
+ mov x18, x0
/*
* Perform 'sp = (x0 != NULL) ? x0 : sp' while working
* around the constraint that conditional moves can not
/*
* Copy u-boot from flash to RAM
*/
- ldr x1, =__image_copy_start /* x1 <- SRC &__image_copy_start */
- subs x9, x0, x1 /* x9 <- relocation offset */
+ adr x1, __image_copy_start /* x1 <- Run &__image_copy_start */
+ subs x9, x0, x1 /* x8 <- Run to copy offset */
b.eq relocate_done /* skip relocation */
- ldr x2, =__image_copy_end /* x2 <- SRC &__image_copy_end */
+ /*
+ * Don't ldr x1, __image_copy_start here, since if the code is already
+ * running at an address other than it was linked to, that instruction
+ * will load the relocated value of __image_copy_start. To
+ * correctly apply relocations, we need to know the linked value.
+ *
+ * Linked &__image_copy_start, which we know was at
+ * CONFIG_SYS_TEXT_BASE, which is stored in _TEXT_BASE, as a non-
+ * relocated value, since it isn't a symbol reference.
+ */
+ ldr x1, _TEXT_BASE /* x1 <- Linked &__image_copy_start */
+ subs x9, x0, x1 /* x9 <- Link to copy offset */
+ adr x1, __image_copy_start /* x1 <- Run &__image_copy_start */
+ adr x2, __image_copy_end /* x2 <- Run &__image_copy_end */
copy_loop:
ldp x10, x11, [x1], #16 /* copy from source address [x1] */
stp x10, x11, [x0], #16 /* copy to target address [x0] */
/*
* Fix .rela.dyn relocations
*/
- ldr x2, =__rel_dyn_start /* x2 <- SRC &__rel_dyn_start */
- ldr x3, =__rel_dyn_end /* x3 <- SRC &__rel_dyn_end */
+ adr x2, __rel_dyn_start /* x2 <- Run &__rel_dyn_start */
+ adr x3, __rel_dyn_end /* x3 <- Run &__rel_dyn_end */
fixloop:
ldp x0, x1, [x2], #16 /* (x0,x1) <- (SRC location, fixup) */
ldr x4, [x2], #8 /* x4 <- addend */
The Amlogic Meson GXBaby (S905) is an ARM SoC with a
quad-core Cortex-A53 CPU and a Mali-450 GPU.
+config MESON_GXL
+ bool "Support Meson GXL"
+ select ARM64
+ select DM
+ select DM_SERIAL
+ help
+ The Amlogic Meson GXL (S905X and S905X) is an ARM SoC with a
+ quad-core Cortex-A53 CPU and a Mali-450 GPU.
+
if MESON_GXBB
config TARGET_ODROID_C2
endif
+if MESON_GXL
+
+config TARGET_P212
+ bool "P212"
+ help
+ P212 is a reference dessign board based on Meson GXL S905X SoC
+ with 2 GiB of RAM, Ethernet, HDMI, 2 USB, micro-SD slot,
+ eMMC, IR receiver, CVBS+Audio jack and a SDIO WiFi module.
+
+endif
+
config SYS_SOC
default "meson"
source "board/amlogic/odroid-c2/Kconfig"
+source "board/amlogic/p212/Kconfig"
+
endif
}
#endif
+#ifdef CONFIG_USB_XHCI_MVEBU
+#define USB3_MAX_WINDOWS 4
+#define USB3_WIN_CTRL(w) (0x0 + ((w) * 8))
+#define USB3_WIN_BASE(w) (0x4 + ((w) * 8))
+
+static void xhci_mvebu_mbus_config(void __iomem *base,
+ const struct mbus_dram_target_info *dram)
+{
+ int i;
+
+ for (i = 0; i < USB3_MAX_WINDOWS; i++) {
+ writel(0, base + USB3_WIN_CTRL(i));
+ writel(0, base + USB3_WIN_BASE(i));
+ }
+
+ for (i = 0; i < dram->num_cs; i++) {
+ const struct mbus_dram_window *cs = dram->cs + i;
+
+ /* Write size, attributes and target id to control register */
+ writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) |
+ (dram->mbus_dram_target_id << 4) | 1,
+ base + USB3_WIN_CTRL(i));
+
+ /* Write base address to base register */
+ writel((cs->base & 0xffff0000), base + USB3_WIN_BASE(i));
+ }
+}
+
+int board_xhci_enable(fdt_addr_t base)
+{
+ const struct mbus_dram_target_info *dram;
+
+ printf("MVEBU XHCI INIT controller @ 0x%lx\n", base);
+
+ dram = mvebu_mbus_dram_info();
+ xhci_mvebu_mbus_config((void __iomem *)base, dram);
+
+ return 0;
+}
+#endif
+
void enable_caches(void)
{
/* Avoid problem with e.g. neta ethernet driver */
return MPUPLL_M_720;
}
+int am335x_get_mpu_vdd(int sil_rev, int frequency)
+{
+ int sel_mask = am335x_get_tps65910_mpu_vdd(sil_rev, frequency);
+
+ switch (sel_mask) {
+ case TPS65910_OP_REG_SEL_1_3_2_5:
+ return 1325000;
+ case TPS65910_OP_REG_SEL_1_2_0:
+ return 1200000;
+ case TPS65910_OP_REG_SEL_1_1_0:
+ return 1100000;
+ default:
+ return 1262500;
+ }
+}
+
int am335x_get_tps65910_mpu_vdd(int sil_rev, int frequency)
{
/* For PG2.0 and later, we have one set of values. */
#size-cells = <0>;
cpu: cpu@0 {
+ u-boot,dm-pre-reloc;
device_type = "cpu";
compatible = "altr,nios2-1.1";
reg = <0x00000000>;
config X86_RESET_VECTOR
bool
default n
+ select BINMAN
# The following options control where the 16-bit and 32-bit init lies
# If SPL is enabled then it normally holds this init code, and U-Boot proper
}
/* Board specific xHCI enable code */
-int board_xhci_enable(void)
+int board_xhci_enable(fdt_addr_t base)
{
struct udevice *dev;
int ret;
return 0;
}
-int board_xhci_enable(void)
+int board_xhci_enable(fdt_addr_t base)
{
struct udevice *dev;
int ret;
--- /dev/null
+if TARGET_P212
+
+config SYS_BOARD
+ default "p212"
+
+config SYS_VENDOR
+ default "amlogic"
+
+config SYS_CONFIG_NAME
+ default "p212"
+
+endif
--- /dev/null
+P212
+M: Neil Armstrong <narmstrong@baylibre.com>
+S: Maintained
+F: board/amlogic/p212/
+F: include/configs/p212.h
+F: configs/p212_defconfig
--- /dev/null
+#
+# (C) Copyright 2016 BayLibre, SAS
+# Author: Neil Armstrong <narmstrong@baylibre.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := p212.o
--- /dev/null
+U-Boot for Amlogic P212
+=======================
+
+P212 is a reference board manufactured by Amlogic with the following
+specifications:
+
+ - Amlogic S905X ARM Cortex-A53 quad-core SoC @ 1.5GHz
+ - ARM Mali 450 GPU
+ - 2GB DDR3 SDRAM
+ - 10/100 Ethernet
+ - HDMI 2.0 4K/60Hz display
+ - 2 x USB 2.0 Host
+ - eMMC, microSD
+ - Infrared receiver
+ - SDIO WiFi Module
+ - CVBS+Stereo Audio Jack
+
+Schematics are available from Amlogic on demand.
+
+Currently the u-boot port supports the following devices:
+ - serial
+ - eMMC, microSD
+
+u-boot compilation
+==================
+
+ > export ARCH=arm
+ > export CROSS_COMPILE=aarch64-none-elf-
+ > make p212_defconfig
+ > make
+
+Image creation
+==============
+
+Amlogic doesn't provide sources for the firmware and for tools needed
+to create the bootloader image, so it is necessary to obtain them from
+the git tree published by the board vendor:
+
+ > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
+ > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
+ > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
+ > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
+ > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
+ > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot
+ > cd amlogic-u-boot
+ > make gxl_p212_v1_defconfig
+ > make
+ > export FIPDIR=$PWD/fip
+
+Go back to mainline U-boot source tree then :
+ > mkdir fip
+
+ > cp $FIPDIR/gxl/bl2.bin fip/
+ > cp $FIPDIR/gxl/acs.bin fip/
+ > cp $FIPDIR/gxl/bl21.bin fip/
+ > cp $FIPDIR/gxl/bl30.bin fip/
+ > cp $FIPDIR/gxl/bl301.bin fip/
+ > cp $FIPDIR/gxl/bl31.img fip/
+ > cp u-boot.bin fip/bl33.bin
+
+ > $FIPDIR/blx_fix.sh \
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
+
+ > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
+
+ > $FIPDIR/blx_fix.sh \
+ fip/bl2_acs.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/bl21.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
+
+ > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin
+ > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img
+ > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin
+ > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig
+ > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc
+
+and then write the image to SD with:
+
+ > DEV=/dev/your_sd_device
+ > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
--- /dev/null
+/*
+ * Copyright (C) 2016 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/io.h>
+#include <asm/arch/gxbb.h>
+#include <asm/arch/sm.h>
+#include <phy.h>
+
+#define EFUSE_SN_OFFSET 20
+#define EFUSE_SN_SIZE 16
+#define EFUSE_MAC_OFFSET 52
+#define EFUSE_MAC_SIZE 6
+
+int board_init(void)
+{
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ u8 mac_addr[EFUSE_MAC_SIZE];
+ char serial[EFUSE_SN_SIZE];
+ ssize_t len;
+
+ /* Set RMII mode */
+ out_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_INVERT_RMII_CLK |
+ GXBB_ETH_REG_0_CLK_EN);
+
+ /* Use Internal PHY */
+ out_le32(GXBB_ETH_REG_2, 0x10110181);
+ out_le32(GXBB_ETH_REG_3, 0xe40908ff);
+
+ /* Enable power and clock gate */
+ setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH);
+ clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK);
+
+ if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
+ len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
+ mac_addr, EFUSE_MAC_SIZE);
+ if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr))
+ eth_env_set_enetaddr("ethaddr", mac_addr);
+ }
+
+ if (!env_get("serial#")) {
+ len = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial,
+ EFUSE_SN_SIZE);
+ if (len == EFUSE_SN_SIZE)
+ env_set("serial#", serial);
+ }
+
+ return 0;
+}
(void) bis;
#ifdef CONFIG_ARM_PL180_MMCI
struct pl180_mmc_host *host;
+ struct mmc *mmc;
host = malloc(sizeof(struct pl180_mmc_host));
if (!host)
host->clock_in = ARM_MCLK;
host->clock_min = ARM_MCLK / (2 * (SDI_CLKCR_CLKDIV_INIT_V1 + 1));
host->clock_max = CONFIG_ARM_PL180_MMCI_CLOCK_FREQ;
- rc = arm_pl180_mmci_init(host);
+ rc = arm_pl180_mmci_init(host, &mmc);
#endif
return rc;
}
F: board/freescale/ls1088a/
F: include/configs/ls1088ardb.h
F: configs/ls1088ardb_qspi_defconfig
+F: configs/ls1088ardb_sdcard_qspi_defconfig
LS1088AQDS BOARD
M: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
F: board/freescale/ls1088a/
F: include/configs/ls1088aqds.h
F: configs/ls1088aqds_qspi_defconfig
+F: configs/ls1088aqds_sdcard_qspi_defconfig
{
puts("Initializing DDR....using SPD\n");
+#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
+ gd->ram_size = fsl_ddr_sdram_size();
+#else
gd->ram_size = fsl_ddr_sdram();
-
+#endif
return 0;
}
}
#endif
-/*
- * IEN - Input Enable
- * IDIS - Input Disable
- * PTD - Pull type Down
- * PTU - Pull type Up
- * DIS - Pull type selection is inactive
- * EN - Pull type selection is active
- * M0 - Mode 0
- * The commented string gives the final mux configuration for that pin
- */
-/*
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers specific to the
- * hardware. Many pins need to be moved from protect to primary
- * mode.
- */
-void set_muxconf_regs(void)
-{
- MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)); /*SDRC_D0*/
- MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)); /*SDRC_D1*/
- MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)); /*SDRC_D2*/
- MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)); /*SDRC_D3*/
- MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)); /*SDRC_D4*/
- MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)); /*SDRC_D5*/
- MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)); /*SDRC_D6*/
- MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)); /*SDRC_D7*/
- MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)); /*SDRC_D8*/
- MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)); /*SDRC_D9*/
- MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)); /*SDRC_D10*/
- MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)); /*SDRC_D11*/
- MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)); /*SDRC_D12*/
- MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)); /*SDRC_D13*/
- MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)); /*SDRC_D14*/
- MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)); /*SDRC_D15*/
- MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)); /*SDRC_D16*/
- MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)); /*SDRC_D17*/
- MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)); /*SDRC_D18*/
- MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)); /*SDRC_D19*/
- MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)); /*SDRC_D20*/
- MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)); /*SDRC_D21*/
- MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)); /*SDRC_D22*/
- MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)); /*SDRC_D23*/
- MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)); /*SDRC_D24*/
- MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)); /*SDRC_D25*/
- MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)); /*SDRC_D26*/
- MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)); /*SDRC_D27*/
- MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)); /*SDRC_D28*/
- MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)); /*SDRC_D29*/
- MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)); /*SDRC_D30*/
- MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)); /*SDRC_D31*/
- MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)); /*SDRC_CLK*/
- MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)); /*SDRC_DQS0*/
- MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)); /*SDRC_DQS1*/
- MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)); /*SDRC_DQS2*/
- MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)); /*SDRC_DQS3*/
- MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)); /*SDRC_CKE0*/
- MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | DIS | M0)); /*SDRC_CKE1*/
-
- MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)); /*GPMC_A1*/
- MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)); /*GPMC_A2*/
- MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)); /*GPMC_A3*/
- MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)); /*GPMC_A4*/
- MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)); /*GPMC_A5*/
- MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)); /*GPMC_A6*/
- MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)); /*GPMC_A7*/
- MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)); /*GPMC_A8*/
- MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)); /*GPMC_A9*/
- MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)); /*GPMC_A10*/
- MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)); /*GPMC_D0*/
- MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)); /*GPMC_D1*/
- MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)); /*GPMC_D2*/
- MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)); /*GPMC_D3*/
- MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)); /*GPMC_D4*/
- MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)); /*GPMC_D5*/
- MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)); /*GPMC_D6*/
- MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)); /*GPMC_D7*/
- MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)); /*GPMC_D8*/
- MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)); /*GPMC_D9*/
- MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)); /*GPMC_D10*/
- MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)); /*GPMC_D11*/
- MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)); /*GPMC_D12*/
- MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)); /*GPMC_D13*/
- MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)); /*GPMC_D14*/
- MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)); /*GPMC_D15*/
- MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)); /*GPMC_nCS0*/
- MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)); /*GPMC_nCS1*/
- MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)); /*GPMC_nCS2*/
- MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)); /*GPMC_nCS3*/
- MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)); /*GPMC_nCS4*/
- MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M0)); /*GPMC_nCS5*/
- MUX_VAL(CP(GPMC_NCS6), (IEN | PTU | EN | M0)); /*GPMC_nCS6*/
- MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M0)); /*GPMC_nCS7*/
- MUX_VAL(CP(GPMC_CLK), (IDIS | PTU | EN | M0)); /*GPMC_CLK*/
- MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)); /*GPMC_nADV_ALE*/
- MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)); /*GPMC_nOE*/
- MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)); /*GPMC_nWE*/
- MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)); /*GPMC_nBE0_CLE*/
- MUX_VAL(CP(GPMC_NBE1), (IEN | PTU | EN | M0)); /*GPMC_nBE1*/
- MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)); /*GPMC_nWP*/
- MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)); /*GPMC_WAIT0*/
- MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)); /*GPMC_WAIT1*/
- MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)); /*GPIO_64*/
- MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)); /*GPMC_WAIT3*/
-
- MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)); /*CAM_HS */
- MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)); /*CAM_VS */
- MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)); /*CAM_XCLKA*/
- MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)); /*CAM_PCLK*/
- MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)); /*GPIO_98*/
- MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)); /*CAM_D0*/
- MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)); /*CAM_D1*/
- MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)); /*CAM_D2*/
- MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)); /*CAM_D3*/
- MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)); /*CAM_D4*/
- MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)); /*CAM_D5*/
- MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)); /*CAM_D6*/
- MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)); /*CAM_D7*/
- MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)); /*CAM_D8*/
- MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)); /*CAM_D9*/
- MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)); /*CAM_D10*/
- MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)); /*CAM_D11*/
- MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)); /*CAM_XCLKB*/
- MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)); /*GPIO_167*/
- MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)); /*CAM_STROBE*/
-
- MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)); /*CSI2_DX0*/
- MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)); /*CSI2_DY0*/
- MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)); /*CSI2_DX1*/
- MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)); /*CSI2_DY1*/
-
- MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)); /*McBSP2_FSX*/
- MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)); /*McBSP2_CLKX*/
- MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)); /*McBSP2_DR*/
- MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)); /*McBSP2_DX*/
-
- MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)); /*MMC1_CLK*/
- MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)); /*MMC1_CMD*/
- MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)); /*MMC1_DAT0*/
- MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)); /*MMC1_DAT1*/
- MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)); /*MMC1_DAT2*/
- MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)); /*MMC1_DAT3*/
- MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)); /*MMC1_DAT4*/
- MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)); /*MMC1_DAT5*/
- MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)); /*MMC1_DAT6*/
- MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)); /*MMC1_DAT7*/
-
- MUX_VAL(CP(MMC2_CLK), (IEN | PTD | DIS | M0)); /*MMC2_CLK*/
- MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)); /*MMC2_CMD*/
- MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)); /*MMC2_DAT0*/
- MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)); /*MMC2_DAT1*/
- MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)); /*MMC2_DAT2*/
- MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)); /*MMC2_DAT3*/
- MUX_VAL(CP(MMC2_DAT4), (IDIS | PTD | DIS | M0)); /*MMC2_DAT4*/
- MUX_VAL(CP(MMC2_DAT5), (IDIS | PTD | DIS | M0)); /*MMC2_DAT5*/
- MUX_VAL(CP(MMC2_DAT6), (IDIS | PTD | DIS | M0)); /*MMC2_DAT6 */
- MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M0)); /*MMC2_DAT7*/
-
- MUX_VAL(CP(MCBSP3_DX), (IDIS | PTD | DIS | M0)); /*McBSP3_DX*/
- MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M0)); /*McBSP3_DR*/
- MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M0)); /*McBSP3_CLKX*/
- MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M0)); /*McBSP3_FSX*/
-
- MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)); /*UART2_CTS*/
- MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)); /*UART2_RTS*/
- MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)); /*UART2_TX*/
- MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M0)); /*UART2_RX*/
-
- MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)); /*UART1_TX*/
- MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)); /*UART1_RTS*/
- MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)); /*UART1_CTS*/
- MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)); /*UART1_RX*/
-
- MUX_VAL(CP(MCBSP4_CLKX), (IDIS | PTD | DIS | M4)); /*GPIO_152*/
- MUX_VAL(CP(MCBSP4_DR), (IDIS | PTD | DIS | M4)); /*GPIO_153*/
-
- MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M0)); /*MCBSP1_CLKR*/
- MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M0)); /*MCBSP1_FSR*/
- MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M0)); /*MCBSP1_DX*/
- MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M0)); /*MCBSP1_DR*/
- MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)); /*MCBSP_CLKS*/
- MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M0)); /*MCBSP1_FSX*/
- MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M0)); /*MCBSP1_CLKX*/
-
- MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)); /*UART3_CTS_*/
- MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)); /*UART3_RTS_SD */
- MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)); /*UART3_RX_IRRX*/
- MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)); /*UART3_TX_IRTX*/
-
- MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)); /*HSUSB0_CLK*/
- MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)); /*HSUSB0_STP*/
- MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)); /*HSUSB0_DIR*/
- MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)); /*HSUSB0_NXT*/
- MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA0*/
- MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA1*/
- MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA2*/
- MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA3*/
- MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA4*/
- MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA5*/
- MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA6*/
- MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA7*/
-
- MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)); /*I2C1_SCL*/
- MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)); /*I2C1_SDA*/
-
- MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)); /*I2C2_SCL*/
- MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)); /*I2C2_SDA*/
-
- MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)); /*I2C3_SCL*/
- MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)); /*I2C3_SDA*/
-
- MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)); /*I2C4_SCL*/
- MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)); /*I2C4_SDA*/
-
- MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M0)); /*HDQ_SIO*/
-
- MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)); /*McSPI1_CLK*/
- MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)); /*McSPI1_SIMO */
- MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)); /*McSPI1_SOMI */
- MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)); /*McSPI1_CS0*/
- MUX_VAL(CP(MCSPI1_CS1), (IEN | PTD | EN | M4)); /*GPIO_175*/
- MUX_VAL(CP(MCSPI1_CS2), (IEN | PTU | DIS | M4)); /*GPIO_176*/
- MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M0)); /*McSPI1_CS3*/
-
- MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)); /*McSPI2_CLK*/
- MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)); /*McSPI2_SIMO*/
- MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)); /*McSPI2_SOMI*/
- MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M0)); /*McSPI2_CS0*/
- MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M0)); /*McSPI2_CS1*/
-
- MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)); /*SYS_32K*/
- MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)); /*SYS_CLKREQ*/
- MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)); /*SYS_nIRQ*/
- MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)); /*GPIO_2*/
- MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)); /*GPIO_3 */
- MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)); /*GPIO_4*/
- MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)); /*GPIO_5*/
- MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)); /*GPIO_6*/
- MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)); /*GPIO_7*/
-
- MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)); /*SYS_OFF_MODE*/
- MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)); /*SYS_CLKOUT1*/
- MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)); /*SYS_CLKOUT2*/
-
- MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)); /*JTAG_TCK*/
- MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)); /*JTAG_TMS*/
- MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)); /*JTAG_TDI*/
- MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)); /*JTAG_EMU0*/
- MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)); /*JTAG_EMU1*/
-
- MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M0)); /*ETK_CLK*/
- MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M0)); /*ETK_CTL*/
- MUX_VAL(CP(ETK_D0_ES2), (IEN | PTD | DIS | M0)); /*ETK_D0*/
- MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | DIS | M0)); /*ETK_D1*/
- MUX_VAL(CP(ETK_D2_ES2), (IEN | PTD | EN | M0)); /*ETK_D2*/
- MUX_VAL(CP(ETK_D3_ES2), (IEN | PTD | DIS | M0)); /*ETK_D3*/
- MUX_VAL(CP(ETK_D4_ES2), (IEN | PTD | DIS | M0)); /*ETK_D4*/
- MUX_VAL(CP(ETK_D5_ES2), (IEN | PTD | DIS | M0)); /*ETK_D5*/
- MUX_VAL(CP(ETK_D6_ES2), (IEN | PTD | DIS | M0)); /*ETK_D6*/
- MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | DIS | M0)); /*ETK_D7*/
- MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | DIS | M0)); /*ETK_D8*/
- MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | DIS | M0)); /*ETK_D9*/
- MUX_VAL(CP(ETK_D10_ES2), (IEN | PTD | DIS | M0)); /*ETK_D10*/
- MUX_VAL(CP(ETK_D11_ES2), (IEN | PTD | DIS | M0)); /*ETK_D11*/
- MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M0)); /*ETK_D12*/
- MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M0)); /*ETK_D13*/
- MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M0)); /*ETK_D14*/
- MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M0)); /*ETK_D15*/
-
- MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)); /*d2d_mcad1*/
- MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)); /*d2d_mcad2*/
- MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0)); /*d2d_mcad3*/
- MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0)); /*d2d_mcad4*/
- MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0)); /*d2d_mcad5*/
- MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0)); /*d2d_mcad6*/
- MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0)); /*d2d_mcad7*/
- MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0)); /*d2d_mcad8*/
- MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0)); /*d2d_mcad9*/
- MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0)); /*d2d_mcad10*/
- MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0)); /*d2d_mcad11*/
- MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0)); /*d2d_mcad12*/
- MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0)); /*d2d_mcad13*/
- MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0)); /*d2d_mcad14*/
- MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0)); /*d2d_mcad15*/
- MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0)); /*d2d_mcad16*/
- MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0)); /*d2d_mcad17*/
- MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0)); /*d2d_mcad18*/
- MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0)); /*d2d_mcad19*/
- MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0)); /*d2d_mcad20*/
- MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0)); /*d2d_mcad21*/
- MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0)); /*d2d_mcad22*/
- MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0)); /*d2d_mcad23*/
- MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0)); /*d2d_mcad24*/
- MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0)); /*d2d_mcad25*/
- MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0)); /*d2d_mcad26*/
- MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0)); /*d2d_mcad27*/
- MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0)); /*d2d_mcad28*/
- MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0)); /*d2d_mcad29*/
- MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0)); /*d2d_mcad30*/
- MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0)); /*d2d_mcad31*/
- MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0)); /*d2d_mcad32*/
- MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0)); /*d2d_mcad33*/
- MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)); /*d2d_mcad34*/
- MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)); /*d2d_mcad35*/
- MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)); /*d2d_mcad36*/
- MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)); /*d2d_clk26mi*/
- MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)); /*d2d_nrespwron*/
- MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)); /*d2d_nreswarm */
- MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)); /*d2d_arm9nirq */
- MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)); /*d2d_uma2p6fiq*/
- MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)); /*d2d_spint*/
- MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)); /*d2d_frint*/
- MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)); /*d2d_dmareq0*/
- MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)); /*d2d_dmareq1*/
- MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)); /*d2d_dmareq2*/
- MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)); /*d2d_dmareq3*/
- MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)); /*d2d_n3gtrst*/
- MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)); /*d2d_n3gtdi*/
- MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)); /*d2d_n3gtdo*/
- MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)); /*d2d_n3gtms*/
- MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)); /*d2d_n3gtck*/
- MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)); /*d2d_n3grtck*/
- MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)); /*d2d_mstdby*/
- MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)); /*d2d_swakeup*/
- MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)); /*d2d_idlereq*/
- MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)); /*d2d_idleack*/
- MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)); /*d2d_mwrite*/
- MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)); /*d2d_swrite*/
- MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)); /*d2d_mread*/
- MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)); /*d2d_sread*/
- MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)); /*d2d_mbusflag*/
- MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)); /*d2d_sbusflag*/
-}
"NAND",
};
+/*
+ * IEN - Input Enable
+ * IDIS - Input Disable
+ * PTD - Pull type Down
+ * PTU - Pull type Up
+ * DIS - Pull type selection is inactive
+ * EN - Pull type selection is active
+ * M0 - Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ * hardware. Many pins need to be moved from protect to primary
+ * mode.
+ */
+void set_muxconf_regs(void)
+{
+ MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)); /*SDRC_D0*/
+ MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)); /*SDRC_D1*/
+ MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)); /*SDRC_D2*/
+ MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)); /*SDRC_D3*/
+ MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)); /*SDRC_D4*/
+ MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)); /*SDRC_D5*/
+ MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)); /*SDRC_D6*/
+ MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)); /*SDRC_D7*/
+ MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)); /*SDRC_D8*/
+ MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)); /*SDRC_D9*/
+ MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)); /*SDRC_D10*/
+ MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)); /*SDRC_D11*/
+ MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)); /*SDRC_D12*/
+ MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)); /*SDRC_D13*/
+ MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)); /*SDRC_D14*/
+ MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)); /*SDRC_D15*/
+ MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)); /*SDRC_D16*/
+ MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)); /*SDRC_D17*/
+ MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)); /*SDRC_D18*/
+ MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)); /*SDRC_D19*/
+ MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)); /*SDRC_D20*/
+ MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)); /*SDRC_D21*/
+ MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)); /*SDRC_D22*/
+ MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)); /*SDRC_D23*/
+ MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)); /*SDRC_D24*/
+ MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)); /*SDRC_D25*/
+ MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)); /*SDRC_D26*/
+ MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)); /*SDRC_D27*/
+ MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)); /*SDRC_D28*/
+ MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)); /*SDRC_D29*/
+ MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)); /*SDRC_D30*/
+ MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)); /*SDRC_D31*/
+ MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)); /*SDRC_CLK*/
+ MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)); /*SDRC_DQS0*/
+ MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)); /*SDRC_DQS1*/
+ MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)); /*SDRC_DQS2*/
+ MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)); /*SDRC_DQS3*/
+ MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)); /*SDRC_CKE0*/
+ MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | DIS | M0)); /*SDRC_CKE1*/
+
+ MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)); /*GPMC_A1*/
+ MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)); /*GPMC_A2*/
+ MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)); /*GPMC_A3*/
+ MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)); /*GPMC_A4*/
+ MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)); /*GPMC_A5*/
+ MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)); /*GPMC_A6*/
+ MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)); /*GPMC_A7*/
+ MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)); /*GPMC_A8*/
+ MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)); /*GPMC_A9*/
+ MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)); /*GPMC_A10*/
+ MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)); /*GPMC_D0*/
+ MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)); /*GPMC_D1*/
+ MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)); /*GPMC_D2*/
+ MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)); /*GPMC_D3*/
+ MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)); /*GPMC_D4*/
+ MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)); /*GPMC_D5*/
+ MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)); /*GPMC_D6*/
+ MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)); /*GPMC_D7*/
+ MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)); /*GPMC_D8*/
+ MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)); /*GPMC_D9*/
+ MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)); /*GPMC_D10*/
+ MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)); /*GPMC_D11*/
+ MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)); /*GPMC_D12*/
+ MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)); /*GPMC_D13*/
+ MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)); /*GPMC_D14*/
+ MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)); /*GPMC_D15*/
+ MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)); /*GPMC_nCS0*/
+ MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)); /*GPMC_nCS1*/
+ MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)); /*GPMC_nCS2*/
+ MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)); /*GPMC_nCS3*/
+ MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)); /*GPMC_nCS4*/
+ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M0)); /*GPMC_nCS5*/
+ MUX_VAL(CP(GPMC_NCS6), (IEN | PTU | EN | M0)); /*GPMC_nCS6*/
+ MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M0)); /*GPMC_nCS7*/
+ MUX_VAL(CP(GPMC_CLK), (IDIS | PTU | EN | M0)); /*GPMC_CLK*/
+ MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)); /*GPMC_nADV_ALE*/
+ MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)); /*GPMC_nOE*/
+ MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)); /*GPMC_nWE*/
+ MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)); /*GPMC_nBE0_CLE*/
+ MUX_VAL(CP(GPMC_NBE1), (IEN | PTU | EN | M0)); /*GPMC_nBE1*/
+ MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)); /*GPMC_nWP*/
+ MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)); /*GPMC_WAIT0*/
+ MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)); /*GPMC_WAIT1*/
+ MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)); /*GPIO_64*/
+ MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)); /*GPMC_WAIT3*/
+
+ MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)); /*CAM_HS */
+ MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)); /*CAM_VS */
+ MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)); /*CAM_XCLKA*/
+ MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)); /*CAM_PCLK*/
+ MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)); /*GPIO_98*/
+ MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)); /*CAM_D0*/
+ MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)); /*CAM_D1*/
+ MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)); /*CAM_D2*/
+ MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)); /*CAM_D3*/
+ MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)); /*CAM_D4*/
+ MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)); /*CAM_D5*/
+ MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)); /*CAM_D6*/
+ MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)); /*CAM_D7*/
+ MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)); /*CAM_D8*/
+ MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)); /*CAM_D9*/
+ MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)); /*CAM_D10*/
+ MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)); /*CAM_D11*/
+ MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)); /*CAM_XCLKB*/
+ MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)); /*GPIO_167*/
+ MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)); /*CAM_STROBE*/
+
+ MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)); /*CSI2_DX0*/
+ MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)); /*CSI2_DY0*/
+ MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)); /*CSI2_DX1*/
+ MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)); /*CSI2_DY1*/
+
+ MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)); /*McBSP2_FSX*/
+ MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)); /*McBSP2_CLKX*/
+ MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)); /*McBSP2_DR*/
+ MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)); /*McBSP2_DX*/
+
+ MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)); /*MMC1_CLK*/
+ MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)); /*MMC1_CMD*/
+ MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)); /*MMC1_DAT0*/
+ MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)); /*MMC1_DAT1*/
+ MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)); /*MMC1_DAT2*/
+ MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)); /*MMC1_DAT3*/
+ MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)); /*MMC1_DAT4*/
+ MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)); /*MMC1_DAT5*/
+ MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)); /*MMC1_DAT6*/
+ MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)); /*MMC1_DAT7*/
+
+ MUX_VAL(CP(MMC2_CLK), (IEN | PTD | DIS | M0)); /*MMC2_CLK*/
+ MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)); /*MMC2_CMD*/
+ MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)); /*MMC2_DAT0*/
+ MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)); /*MMC2_DAT1*/
+ MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)); /*MMC2_DAT2*/
+ MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)); /*MMC2_DAT3*/
+ MUX_VAL(CP(MMC2_DAT4), (IDIS | PTD | DIS | M0)); /*MMC2_DAT4*/
+ MUX_VAL(CP(MMC2_DAT5), (IDIS | PTD | DIS | M0)); /*MMC2_DAT5*/
+ MUX_VAL(CP(MMC2_DAT6), (IDIS | PTD | DIS | M0)); /*MMC2_DAT6 */
+ MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M0)); /*MMC2_DAT7*/
+
+ MUX_VAL(CP(MCBSP3_DX), (IDIS | PTD | DIS | M0)); /*McBSP3_DX*/
+ MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M0)); /*McBSP3_DR*/
+ MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M0)); /*McBSP3_CLKX*/
+ MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M0)); /*McBSP3_FSX*/
+
+ MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)); /*UART2_CTS*/
+ MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)); /*UART2_RTS*/
+ MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)); /*UART2_TX*/
+ MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M0)); /*UART2_RX*/
+
+ MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)); /*UART1_TX*/
+ MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)); /*UART1_RTS*/
+ MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)); /*UART1_CTS*/
+ MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)); /*UART1_RX*/
+
+ MUX_VAL(CP(MCBSP4_CLKX), (IDIS | PTD | DIS | M4)); /*GPIO_152*/
+ MUX_VAL(CP(MCBSP4_DR), (IDIS | PTD | DIS | M4)); /*GPIO_153*/
+
+ MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M0)); /*MCBSP1_CLKR*/
+ MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M0)); /*MCBSP1_FSR*/
+ MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M0)); /*MCBSP1_DX*/
+ MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M0)); /*MCBSP1_DR*/
+ MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)); /*MCBSP_CLKS*/
+ MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M0)); /*MCBSP1_FSX*/
+ MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M0)); /*MCBSP1_CLKX*/
+
+ MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)); /*UART3_CTS_*/
+ MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)); /*UART3_RTS_SD */
+ MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)); /*UART3_RX_IRRX*/
+ MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)); /*UART3_TX_IRTX*/
+
+ MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)); /*HSUSB0_CLK*/
+ MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)); /*HSUSB0_STP*/
+ MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)); /*HSUSB0_DIR*/
+ MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)); /*HSUSB0_NXT*/
+ MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA0*/
+ MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA1*/
+ MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA2*/
+ MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA3*/
+ MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA4*/
+ MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA5*/
+ MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA6*/
+ MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA7*/
+
+ MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)); /*I2C1_SCL*/
+ MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)); /*I2C1_SDA*/
+
+ MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)); /*I2C2_SCL*/
+ MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)); /*I2C2_SDA*/
+
+ MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)); /*I2C3_SCL*/
+ MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)); /*I2C3_SDA*/
+
+ MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)); /*I2C4_SCL*/
+ MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)); /*I2C4_SDA*/
+
+ MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M0)); /*HDQ_SIO*/
+
+ MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)); /*McSPI1_CLK*/
+ MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)); /*McSPI1_SIMO */
+ MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)); /*McSPI1_SOMI */
+ MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)); /*McSPI1_CS0*/
+ MUX_VAL(CP(MCSPI1_CS1), (IEN | PTD | EN | M4)); /*GPIO_175*/
+ MUX_VAL(CP(MCSPI1_CS2), (IEN | PTU | DIS | M4)); /*GPIO_176*/
+ MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M0)); /*McSPI1_CS3*/
+
+ MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)); /*McSPI2_CLK*/
+ MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)); /*McSPI2_SIMO*/
+ MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)); /*McSPI2_SOMI*/
+ MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M0)); /*McSPI2_CS0*/
+ MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M0)); /*McSPI2_CS1*/
+
+ MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)); /*SYS_32K*/
+ MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)); /*SYS_CLKREQ*/
+ MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)); /*SYS_nIRQ*/
+ MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)); /*GPIO_2*/
+ MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)); /*GPIO_3 */
+ MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)); /*GPIO_4*/
+ MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)); /*GPIO_5*/
+ MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)); /*GPIO_6*/
+ MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)); /*GPIO_7*/
+
+ MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)); /*SYS_OFF_MODE*/
+ MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)); /*SYS_CLKOUT1*/
+ MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)); /*SYS_CLKOUT2*/
+
+ MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)); /*JTAG_TCK*/
+ MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)); /*JTAG_TMS*/
+ MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)); /*JTAG_TDI*/
+ MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)); /*JTAG_EMU0*/
+ MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)); /*JTAG_EMU1*/
+
+ MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M0)); /*ETK_CLK*/
+ MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M0)); /*ETK_CTL*/
+ MUX_VAL(CP(ETK_D0_ES2), (IEN | PTD | DIS | M0)); /*ETK_D0*/
+ MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | DIS | M0)); /*ETK_D1*/
+ MUX_VAL(CP(ETK_D2_ES2), (IEN | PTD | EN | M0)); /*ETK_D2*/
+ MUX_VAL(CP(ETK_D3_ES2), (IEN | PTD | DIS | M0)); /*ETK_D3*/
+ MUX_VAL(CP(ETK_D4_ES2), (IEN | PTD | DIS | M0)); /*ETK_D4*/
+ MUX_VAL(CP(ETK_D5_ES2), (IEN | PTD | DIS | M0)); /*ETK_D5*/
+ MUX_VAL(CP(ETK_D6_ES2), (IEN | PTD | DIS | M0)); /*ETK_D6*/
+ MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | DIS | M0)); /*ETK_D7*/
+ MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | DIS | M0)); /*ETK_D8*/
+ MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | DIS | M0)); /*ETK_D9*/
+ MUX_VAL(CP(ETK_D10_ES2), (IEN | PTD | DIS | M0)); /*ETK_D10*/
+ MUX_VAL(CP(ETK_D11_ES2), (IEN | PTD | DIS | M0)); /*ETK_D11*/
+ MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M0)); /*ETK_D12*/
+ MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M0)); /*ETK_D13*/
+ MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M0)); /*ETK_D14*/
+ MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M0)); /*ETK_D15*/
+
+ MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)); /*d2d_mcad1*/
+ MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)); /*d2d_mcad2*/
+ MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0)); /*d2d_mcad3*/
+ MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0)); /*d2d_mcad4*/
+ MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0)); /*d2d_mcad5*/
+ MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0)); /*d2d_mcad6*/
+ MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0)); /*d2d_mcad7*/
+ MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0)); /*d2d_mcad8*/
+ MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0)); /*d2d_mcad9*/
+ MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0)); /*d2d_mcad10*/
+ MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0)); /*d2d_mcad11*/
+ MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0)); /*d2d_mcad12*/
+ MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0)); /*d2d_mcad13*/
+ MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0)); /*d2d_mcad14*/
+ MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0)); /*d2d_mcad15*/
+ MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0)); /*d2d_mcad16*/
+ MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0)); /*d2d_mcad17*/
+ MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0)); /*d2d_mcad18*/
+ MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0)); /*d2d_mcad19*/
+ MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0)); /*d2d_mcad20*/
+ MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0)); /*d2d_mcad21*/
+ MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0)); /*d2d_mcad22*/
+ MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0)); /*d2d_mcad23*/
+ MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0)); /*d2d_mcad24*/
+ MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0)); /*d2d_mcad25*/
+ MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0)); /*d2d_mcad26*/
+ MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0)); /*d2d_mcad27*/
+ MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0)); /*d2d_mcad28*/
+ MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0)); /*d2d_mcad29*/
+ MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0)); /*d2d_mcad30*/
+ MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0)); /*d2d_mcad31*/
+ MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0)); /*d2d_mcad32*/
+ MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0)); /*d2d_mcad33*/
+ MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)); /*d2d_mcad34*/
+ MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)); /*d2d_mcad35*/
+ MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)); /*d2d_mcad36*/
+ MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)); /*d2d_clk26mi*/
+ MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)); /*d2d_nrespwron*/
+ MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)); /*d2d_nreswarm */
+ MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)); /*d2d_arm9nirq */
+ MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)); /*d2d_uma2p6fiq*/
+ MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)); /*d2d_spint*/
+ MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)); /*d2d_frint*/
+ MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)); /*d2d_dmareq0*/
+ MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)); /*d2d_dmareq1*/
+ MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)); /*d2d_dmareq2*/
+ MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)); /*d2d_dmareq3*/
+ MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)); /*d2d_n3gtrst*/
+ MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)); /*d2d_n3gtdi*/
+ MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)); /*d2d_n3gtdo*/
+ MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)); /*d2d_n3gtms*/
+ MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)); /*d2d_n3gtck*/
+ MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)); /*d2d_n3grtck*/
+ MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)); /*d2d_mstdby*/
+ MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)); /*d2d_swakeup*/
+ MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)); /*d2d_idlereq*/
+ MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)); /*d2d_idleack*/
+ MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)); /*d2d_mwrite*/
+ MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)); /*d2d_swrite*/
+ MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)); /*d2d_mread*/
+ MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)); /*d2d_sread*/
+ MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)); /*d2d_mbusflag*/
+ MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)); /*d2d_sbusflag*/
+}
#endif
omap_die_id_serial();
omap_set_fastboot_vars();
+
+ /*
+ * Hook the LDO1 regulator to EN pin. This applies only to LP8733
+ * Rest all regulators are hooked to EN Pin at reset.
+ */
+ if (board_is_dra71x_evm())
+ palmas_i2c_write_u8(LP873X_I2C_SLAVE_ADDR, 0x9, 0x7);
#endif
return 0;
}
U_BOOT_CMD(
mac, 3, 1, do_mac,
"display and program the system ID and MAC addresses in EEPROM",
- "[read|save|id|num|errata|date|ports|0|1|2|3|4|5|6|7]\n"
+ "[read|save|id|num|errata|date|ports|port_number]\n"
"mac read\n"
- " - read EEPROM content into memory\n"
+ " - read EEPROM content into memory data structure\n"
"mac save\n"
- " - save to the EEPROM\n"
+ " - save memory data structure to the EEPROM\n"
"mac id\n"
- " - program system id\n"
- "mac num\n"
- " - program system serial number\n"
- "mac errata\n"
- " - program errata data\n"
- "mac date\n"
- " - program date\n"
- "mac ports\n"
- " - program the number of ports\n"
- "mac X\n"
- " - program the MAC address for port X [X=0...7]"
+ " - program system id per hard coded value\n"
+ "mac num string\n"
+ " - program system serial number to value string\n"
+ "mac errata string\n"
+ " - program errata data to value string\n"
+ "mac date YYMMDDhhmmss\n"
+ " - program date to string value YYMMDDhhmmss\n"
+ "mac ports N\n"
+ " - program the number of network ports to integer N\n"
+ "mac X string\n"
+ " - program MAC addr for port X [X=0,1..] to colon separated string"
);
CONFIG_BOOTARGS goes into the environment value "bootargs". Note that
this value will also override the "chosen" node in FDT blob.
+config USE_BOOTCOMMAND
+ bool "Enable a default value for bootcmd"
+ help
+ Provide a default value for the bootcmd entry in the environment. If
+ autoboot is enabled this is what will be run automatically. Enable
+ this option to be able to specify CONFIG_BOOTCOMMAND as a string. If
+ this option is disabled, CONFIG_BOOTCOMMAND will be undefined and
+ won't take any space in U-Boot image.
+
+config BOOTCOMMAND
+ string "bootcmd value"
+ depends on USE_BOOTCOMMAND
+ default "run distro_bootcmd" if DISTRO_DEFAULTS
+ help
+ This is the string of commands that will be used as bootcmd and if
+ AUTOBOOT is set, automatically run.
+
menu "Console"
config MENU
CONFIG_AM33XX=y
CONFIG_DEFAULT_DEVICE_TREE="am335x-evm"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd"
CONFIG_SPL_LOAD_FIT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_AM33XX=y
CONFIG_NOR=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_AM33XX=y
CONFIG_NOR=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd"
CONFIG_NOR_BOOT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd"
CONFIG_SYS_EXTRA_OPTIONS="SPI_BOOT"
CONFIG_SPI_BOOT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_AM33XX=y
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd"
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_FIT=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOOTDELAY=1
+CONFIG_BOOTCOMMAND="run emmcboot; setenv fdtfile ${soc}-apalis-${fdt_board}.dtb && run distro_bootcmd"
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_DM_USB=y
-CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_MVEBU=y
CONFIG_USB_STORAGE=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPI_FLASH_MTD=y
CONFIG_USB_ETHER_MCS7830=y
CONFIG_USB_ETHER_SMSC95XX=y
CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_MMC=y
CONFIG_TARGET_DUOVERO=y
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_TARGET_EVB_RV1108=y
CONFIG_DEFAULT_DEVICE_TREE="rv1108-evb"
CONFIG_DEBUG_UART=y
+# CONFIG_USE_BOOTCOMMAND is not set
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_FASTBOOT_BUF_ADDR=0x62000000
CONFIG_FASTBOOT_BUF_SIZE=0x08000000
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_TARGET_OMAP3_IGEP00X0=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd"
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=3
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_TARGET_OMAP3_IGEP00X0=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd"
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=3
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_DM=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_SPANSION=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_PCI=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_TARGET_LS1088AQDS=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_FSL_LS_PPA=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds"
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_PARTITIONS=y
+CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT_QSPI"
+CONFIG_SD_BOOT=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL=y
+CONFIG_SPL_BUILD=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_SYS_NS16550=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_DSPI=y
CONFIG_TARGET_LS1088ARDB=y
CONFIG_FSL_LS_PPA=y
CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb"
+CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_DM=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_SPANSION=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
CONFIG_PCI=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_TARGET_LS1088ARDB=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_FSL_LS_PPA=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb"
+CONFIG_DISTRO_DEFAULTS=y
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_PARTITIONS=y
+CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT_QSPI"
+CONFIG_SD_BOOT=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL=y
+CONFIG_SPL_BUILD=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_SYS_NS16550=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_DSPI=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
+# CONFIG_USE_BOOTCOMMAND is not set
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_XIMG is not set
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
+# CONFIG_USE_BOOTCOMMAND is not set
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_XIMG is not set
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
+# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
+# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
+# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SPL=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
+# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_GPT=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
+# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SPL=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
+# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
+# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
+# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SPL=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
+# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_CMD_GREPENV=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_QSPI_BOOT=y
CONFIG_BOOTDELAY=10
+# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_CMD_GREPENV=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
+# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_CMD_GREPENV=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/sda2"
+CONFIG_BOOTCOMMAND="run bootcmd_${bootsource}"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MX6=y
CONFIG_TARGET_EMBESTMX6BOARDS=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTCOMMAND="run finduuid; run distro_bootcmd"
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024"
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_MVEBU_ARMADA_8K=y
CONFIG_DEFAULT_DEVICE_TREE="armada-8040-db"
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_SMBIOS_PRODUCT_NAME=""
CONFIG_DEBUG_UART=y
CONFIG_AHCI=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_MVEBU_ARMADA_8K=y
CONFIG_DEFAULT_DEVICE_TREE="armada-8040-mcbin"
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_SMBIOS_PRODUCT_NAME=""
CONFIG_DEBUG_UART=y
CONFIG_AHCI=y
# CONFIG_CMD_BMODE is not set
CONFIG_CMD_HDMIDETECT=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
# CONFIG_SYS_STDIO_DEREGISTER is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_FAT_SUPPORT=y
CONFIG_CMD_HDMIDETECT=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTCOMMAND="run distro_bootcmd ; run net_nfs"
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q"
CONFIG_USE_BOOTARGS=y
CONFIG_SYS_TEXT_BASE=0x80100000
CONFIG_TARGET_OMAP3_BEAGLE=y
CONFIG_DISTRO_DEFAULTS=y
+# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SYS_MPUCLK=720
CONFIG_TARGET_OMAP3_EVM=y
CONFIG_DISTRO_DEFAULTS=y
+# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_BOOTDELAY=3
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DEFAULT_FDT_FILE="omap3-evm.dtb"
CONFIG_SYS_TEXT_BASE=0x80008000
CONFIG_TARGET_OMAP3_PANDORA=y
CONFIG_DISTRO_DEFAULTS=y
+# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_TARGET_OMAP4_PANDA=y
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_CMD_BAT=y
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_MESON=y
+CONFIG_MESON_GXL=y
+CONFIG_TARGET_P212=y
+CONFIG_IDENT_STRING=" p212"
+CONFIG_DEFAULT_DEVICE_TREE="meson-gxl-s905x-p212"
+CONFIG_DEBUG_UART=y
+CONFIG_ENV_IS_NOWHERE=y
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+# CONFIG_CMD_BDI is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_MESON_GX=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_PHY_MESON_GXL=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_MESON_GXL=y
+CONFIG_DEBUG_UART_MESON=y
+CONFIG_DEBUG_UART_BASE=0xc81004c0
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_MESON_SERIAL=y
+CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_ARCH_MX6=y
CONFIG_TARGET_EMBESTMX6BOARDS=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTCOMMAND="run finduuid; run distro_bootcmd"
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024"
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyO2,115200n8 noinitrd earlyprintk"
+# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL_WATCHDOG_SUPPORT=y
# CONFIG_CMD_BMODE is not set
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd"
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL=y
CONFIG_TARGET_USBARMORY=y
# CONFIG_CMD_BMODE is not set
CONFIG_DISTRO_DEFAULTS=y
+# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_FUSE=y
CONFIG_CMD_I2C=y
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyAMA0 earlyprintk=pl011,0x1c090000 debug user_debug=31 androidboot.hardware=fvpbase root=/dev/vda2 rw rootwait loglevel=9"
+# CONFIG_USE_BOOTCOMMAND is not set
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SYS_PROMPT="VExpress64# "
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyAMA0,115200n8 root=/dev/sda2 rw rootwait earlyprintk=pl011,0x7ff80000 debug user_debug=31 androidboot.hardware=juno loglevel=9"
+# CONFIG_USE_BOOTCOMMAND is not set
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SYS_PROMPT="VExpress64# "
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyAMA0 earlyprintk=pl011,0x1c090000 debug user_debug=31 loglevel=9"
+# CONFIG_USE_BOOTCOMMAND is not set
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SYS_PROMPT="VExpress64# "
CONFIG_ARM=y
CONFIG_TARGET_VEXPRESS_CA15_TC2=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTCOMMAND="run distro_bootcmd; run bootflash"
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARM=y
CONFIG_TARGET_VEXPRESS_CA5X2=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTCOMMAND="run distro_bootcmd; run bootflash"
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMD_CONSOLE is not set
CONFIG_ARM=y
CONFIG_TARGET_VEXPRESS_CA9X4=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTCOMMAND="run distro_bootcmd; run bootflash"
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMD_CONSOLE is not set
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_CMD_HDMIDETECT=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd"
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q"
CONFIG_BOOTDELAY=3
CONFIG_DEFAULT_FDT_FILE="imx6q-zc5202.dtb"
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd"
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q"
CONFIG_BOOTDELAY=3
CONFIG_DEFAULT_FDT_FILE="imx6q-zc5601.dtb"
This setting will override any values configured via Kconfig.
+u-boot,mmc-env-partition
+ if present, the environment shall be placed at the last
+ CONFIG_ENV_SIZE blocks of the partition on the
+ CONFIG_SYS_MMC_ENV_DEV.
+
+ if u-boot,mmc-env-offset* is present, this setting will take
+ precedence. In that case, only if the partition is not found,
+ mmc-env-offset* will be tried.
+
u-boot,mmc-env-offset
u-boot,mmc-env-offset-redundant
If present, the values of the 'u-boot,mmc-env-offset' and/or
| (sys_pll_psc.apb2_psc << RCC_CFGR_PPRE2_SHIFT)));
/* Configure the main PLL */
- uint32_t pllcfgr = 0;
- pllcfgr = RCC_PLLCFGR_PLLSRC; /* pll source HSE */
- pllcfgr |= sys_pll_psc.pll_m << RCC_PLLCFGR_PLLM_SHIFT;
- pllcfgr |= sys_pll_psc.pll_n << RCC_PLLCFGR_PLLN_SHIFT;
- pllcfgr |= ((sys_pll_psc.pll_p >> 1) - 1) << RCC_PLLCFGR_PLLP_SHIFT;
- pllcfgr |= sys_pll_psc.pll_q << RCC_PLLCFGR_PLLQ_SHIFT;
- writel(pllcfgr, ®s->pllcfgr);
+ setbits_le32(®s->pllcfgr, RCC_PLLCFGR_PLLSRC); /* pll source HSE */
+ clrsetbits_le32(®s->pllcfgr, RCC_PLLCFGR_PLLM_MASK,
+ sys_pll_psc.pll_m << RCC_PLLCFGR_PLLM_SHIFT);
+ clrsetbits_le32(®s->pllcfgr, RCC_PLLCFGR_PLLN_MASK,
+ sys_pll_psc.pll_n << RCC_PLLCFGR_PLLN_SHIFT);
+ clrsetbits_le32(®s->pllcfgr, RCC_PLLCFGR_PLLP_MASK,
+ ((sys_pll_psc.pll_p >> 1) - 1) << RCC_PLLCFGR_PLLP_SHIFT);
+ clrsetbits_le32(®s->pllcfgr, RCC_PLLCFGR_PLLQ_MASK,
+ sys_pll_psc.pll_q << RCC_PLLCFGR_PLLQ_SHIFT);
/* Enable the main PLL */
setbits_le32(®s->cr, RCC_CR_PLLON);
if MMC
+config ARM_PL180_MMCI
+ bool "ARM AMBA Multimedia Card Interface and compatible support"
+ depends on DM_MMC && OF_CONTROL
+ help
+ This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
+ Interface (PL180, PL181 and compatible) support.
+ If you have an ARM(R) platform with a Multimedia Card slot,
+ say Y or M here.
+
config SPL_MMC_TINY
bool "Tiny MMC framework in SPL"
help
/* #define DEBUG */
-#include <asm/io.h>
#include "common.h"
+#include <clk.h>
#include <errno.h>
+#include <malloc.h>
#include <mmc.h>
+
+#include <asm/io.h>
+#include <asm-generic/gpio.h>
+
#include "arm_pl180_mmci.h"
-#include <malloc.h>
+
+#ifdef CONFIG_DM_MMC
+#include <dm.h>
+DECLARE_GLOBAL_DATA_PTR;
+
+#define MMC_CLOCK_MAX 48000000
+#define MMC_CLOCK_MIN 400000
+
+struct arm_pl180_mmc_plat {
+ struct mmc_config cfg;
+ struct mmc mmc;
+};
+#endif
static int wait_for_command_end(struct mmc *dev, struct mmc_cmd *cmd)
{
return result;
}
-/* MMC uses open drain drivers in the enumeration phase */
-static int mmc_host_reset(struct mmc *dev)
-{
- struct pl180_mmc_host *host = dev->priv;
-
- writel(host->pwr_init, &host->base->power);
-
- return 0;
-}
-
static int host_set_ios(struct mmc *dev)
{
struct pl180_mmc_host *host = dev->priv;
return 0;
}
+#ifndef CONFIG_DM_MMC
+/* MMC uses open drain drivers in the enumeration phase */
+static int mmc_host_reset(struct mmc *dev)
+{
+ struct pl180_mmc_host *host = dev->priv;
+
+ writel(host->pwr_init, &host->base->power);
+
+ return 0;
+}
+
static const struct mmc_ops arm_pl180_mmci_ops = {
.send_cmd = host_request,
.set_ios = host_set_ios,
.init = mmc_host_reset,
};
+#endif
/*
* mmc_host_init - initialize the mmc controller.
* Set initial clock and power for mmc slot.
* Initialize mmc struct and register with mmc framework.
*/
-int arm_pl180_mmci_init(struct pl180_mmc_host *host)
+int arm_pl180_mmci_init(struct pl180_mmc_host *host, struct mmc **mmc)
{
- struct mmc *mmc;
u32 sdi_u32;
writel(host->pwr_init, &host->base->power);
writel(sdi_u32, &host->base->mask0);
host->cfg.name = host->name;
+#ifndef CONFIG_DM_MMC
host->cfg.ops = &arm_pl180_mmci_ops;
+#endif
/* TODO remove the duplicates */
host->cfg.host_caps = host->caps;
host->cfg.voltages = host->voltages;
else
host->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
- mmc = mmc_create(&host->cfg, host);
- if (mmc == NULL)
+ *mmc = mmc_create(&host->cfg, host);
+ if (!*mmc)
return -1;
- debug("registered mmc interface number is:%d\n", mmc->block_dev.devnum);
+ debug("registered mmc interface number is:%d\n",
+ (*mmc)->block_dev.devnum);
return 0;
}
+
+#ifdef CONFIG_DM_MMC
+static int arm_pl180_mmc_probe(struct udevice *dev)
+{
+ struct arm_pl180_mmc_plat *pdata = dev_get_platdata(dev);
+ struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+ struct mmc *mmc = &pdata->mmc;
+ struct pl180_mmc_host *host = mmc->priv;
+ struct clk clk;
+ u32 bus_width;
+ int ret;
+
+ ret = clk_get_by_index(dev, 0, &clk);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_enable(&clk);
+ if (ret) {
+ dev_err(dev, "failed to enable clock\n");
+ return ret;
+ }
+
+ strcpy(host->name, "MMC");
+ host->pwr_init = INIT_PWR;
+ host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V1 | SDI_CLKCR_CLKEN |
+ SDI_CLKCR_HWFC_EN;
+ host->voltages = VOLTAGE_WINDOW_SD;
+ host->caps = 0;
+ host->clock_in = clk_get_rate(&clk);
+ host->clock_min = host->clock_in / (2 * (SDI_CLKCR_CLKDIV_INIT_V1 + 1));
+ host->clock_max = dev_read_u32_default(dev, "max-frequency",
+ MMC_CLOCK_MAX);
+ host->version2 = dev_get_driver_data(dev);
+
+ gpio_request_by_name(dev, "cd-gpios", 0, &host->cd_gpio, GPIOD_IS_IN);
+
+ bus_width = dev_read_u32_default(dev, "bus-width", 1);
+ switch (bus_width) {
+ case 8:
+ host->caps |= MMC_MODE_8BIT;
+ /* Hosts capable of 8-bit transfers can also do 4 bits */
+ case 4:
+ host->caps |= MMC_MODE_4BIT;
+ break;
+ case 1:
+ break;
+ default:
+ dev_err(dev, "Invalid bus-width value %u\n", bus_width);
+ }
+
+ ret = arm_pl180_mmci_init(host, &mmc);
+ if (ret) {
+ dev_err(dev, "arm_pl180_mmci init failed\n");
+ return ret;
+ }
+
+ mmc->dev = dev;
+ dev->priv = host;
+ upriv->mmc = mmc;
+
+ return 0;
+}
+
+static int dm_host_request(struct udevice *dev, struct mmc_cmd *cmd,
+ struct mmc_data *data)
+{
+ struct mmc *mmc = mmc_get_mmc_dev(dev);
+
+ return host_request(mmc, cmd, data);
+}
+
+static int dm_host_set_ios(struct udevice *dev)
+{
+ struct mmc *mmc = mmc_get_mmc_dev(dev);
+
+ return host_set_ios(mmc);
+}
+
+static int dm_mmc_getcd(struct udevice *dev)
+{
+ struct arm_pl180_mmc_plat *pdata = dev_get_platdata(dev);
+ struct mmc *mmc = &pdata->mmc;
+ struct pl180_mmc_host *host = mmc->priv;
+ int value = 1;
+
+ if (dm_gpio_is_valid(&host->cd_gpio)) {
+ value = dm_gpio_get_value(&host->cd_gpio);
+ if (host->cd_inverted)
+ return !value;
+ }
+
+ return value;
+}
+
+static const struct dm_mmc_ops arm_pl180_dm_mmc_ops = {
+ .send_cmd = dm_host_request,
+ .set_ios = dm_host_set_ios,
+ .get_cd = dm_mmc_getcd,
+};
+
+static int arm_pl180_mmc_ofdata_to_platdata(struct udevice *dev)
+{
+ struct arm_pl180_mmc_plat *pdata = dev_get_platdata(dev);
+ struct mmc *mmc = &pdata->mmc;
+ struct pl180_mmc_host *host = mmc->priv;
+ fdt_addr_t addr;
+
+ addr = devfdt_get_addr(dev);
+ if (addr == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ host->base = (void *)addr;
+
+ return 0;
+}
+
+static const struct udevice_id arm_pl180_mmc_match[] = {
+ { .compatible = "st,stm32f4xx-sdio", .data = VERSION1 },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(arm_pl180_mmc) = {
+ .name = "arm_pl180_mmc",
+ .id = UCLASS_MMC,
+ .of_match = arm_pl180_mmc_match,
+ .ops = &arm_pl180_dm_mmc_ops,
+ .probe = arm_pl180_mmc_probe,
+ .ofdata_to_platdata = arm_pl180_mmc_ofdata_to_platdata,
+ .priv_auto_alloc_size = sizeof(struct pl180_mmc_host),
+ .platdata_auto_alloc_size = sizeof(struct arm_pl180_mmc_plat),
+};
+#endif
#define SDI_FIFO_BURST_SIZE 8
+#define VERSION1 false
+#define VERSION2 true
+
struct sdi_registers {
u32 power; /* 0x00*/
u32 clock; /* 0x04*/
unsigned int pwr_init;
int version2;
struct mmc_config cfg;
+#ifdef CONFIG_DM_MMC
+ struct gpio_desc cd_gpio;
+ bool cd_inverted;
+#endif
};
-int arm_pl180_mmci_init(struct pl180_mmc_host *);
+int arm_pl180_mmci_init(struct pl180_mmc_host *host, struct mmc **mmc);
#endif
config NAND_OMAP_GPMC_PREFETCH
bool "Enable GPMC Prefetch"
depends on NAND_OMAP_GPMC
+ default y
help
On OMAP platforms that use the GPMC controller
(CONFIG_NAND_OMAP_GPMC_PREFETCH), this options enables the code that
/* device info */
struct fsl_ifc regs;
void __iomem *addr; /* Address of assigned IFC buffer */
- unsigned int cs_nand; /* On which chipsel NAND is connected */
unsigned int page; /* Last page written to / read from */
unsigned int read_bytes; /* Number of bytes read during command */
unsigned int column; /* Saved column from SEQIN */
int i;
/* set the chip select for NAND Transaction */
- ifc_out32(&ifc->ifc_nand.nand_csel, ifc_ctrl->cs_nand);
+ ifc_out32(&ifc->ifc_nand.nand_csel, priv->bank << IFC_NAND_CSEL_SHIFT);
/* start read/write seq */
ifc_out32(&ifc->ifc_nand.nandseq_strt,
{
}
-static int fsl_ifc_sram_init(uint32_t ver)
+static int fsl_ifc_sram_init(struct fsl_ifc_mtd *priv, uint32_t ver)
{
struct fsl_ifc_runtime *ifc = ifc_ctrl->regs.rregs;
uint32_t cs = 0, csor = 0, csor_8k = 0, csor_ext = 0;
return 1;
}
- cs = ifc_ctrl->cs_nand >> IFC_NAND_CSEL_SHIFT;
+ cs = priv->bank;
/* Save CSOR and CSOR_ext */
csor = ifc_in32(&ifc_ctrl->regs.gregs->csor_cs[cs].csor);
ifc_out32(&ifc->ifc_nand.col0, 0x0);
/* set the chip select for NAND Transaction */
- ifc_out32(&ifc->ifc_nand.nand_csel, ifc_ctrl->cs_nand);
+ ifc_out32(&ifc->ifc_nand.nand_csel, priv->bank << IFC_NAND_CSEL_SHIFT);
/* start read seq */
ifc_out32(&ifc->ifc_nand.nandseq_strt, IFC_NAND_SEQ_STRT_FIR_STRT);
csor = ifc_in32(&gregs->csor_cs[priv->bank].csor);
if ((cspr & CSPR_V) && (cspr & CSPR_MSEL) == CSPR_MSEL_NAND &&
- (cspr & CSPR_BA) == CSPR_PHYS_ADDR(phys_addr)) {
- ifc_ctrl->cs_nand = priv->bank << IFC_NAND_CSEL_SHIFT;
+ (cspr & CSPR_BA) == CSPR_PHYS_ADDR(phys_addr))
break;
- }
}
if (priv->bank >= MAX_BANKS) {
ver = ifc_in32(&gregs->ifc_rev);
if (ver >= FSL_IFC_V1_1_0)
- ret = fsl_ifc_sram_init(ver);
+ ret = fsl_ifc_sram_init(priv, ver);
if (ret)
return ret;
if (dram_block_size_env_var) {
dram_block_size = simple_strtoul(dram_block_size_env_var, NULL,
- 10);
+ 16);
if (dram_block_size < CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE) {
printf("fsl-mc: WARNING: Invalid value for \'"
&buffer_start, 1);
} while (err == -EBUSY);
- if (err < 0) {
+ if (err <= 0) {
printf("qbman_swp_acquire() failed\n");
return -ENOMEM;
}
config PHY_MARVELL
bool "Marvell Ethernet PHYs support"
+config PHY_MESON_GXL
+ bool "Amlogic Meson GXL Internal PHY support"
+
config PHY_MICREL
bool "Micrel Ethernet PHYs support"
help
obj-$(CONFIG_PHY_MARVELL) += marvell.o
obj-$(CONFIG_PHY_MICREL_KSZ8XXX) += micrel_ksz8xxx.o
obj-$(CONFIG_PHY_MICREL_KSZ90X1) += micrel_ksz90x1.o
+obj-$(CONFIG_PHY_MESON_GXL) += meson-gxl.o
obj-$(CONFIG_PHY_NATSEMI) += natsemi.o
obj-$(CONFIG_PHY_REALTEK) += realtek.o
obj-$(CONFIG_PHY_SMSC) += smsc.o
--- /dev/null
+/*
+ * Meson GXL Internal PHY Driver
+ *
+ * Copyright (C) 2015 Amlogic, Inc. All rights reserved.
+ * Copyright (C) 2016 BayLibre, SAS. All rights reserved.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <config.h>
+#include <common.h>
+#include <linux/bitops.h>
+#include <phy.h>
+
+static int meson_gxl_phy_config(struct phy_device *phydev)
+{
+ /* Enable Analog and DSP register Bank access by */
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x14, 0x0000);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x14, 0x0400);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x14, 0x0000);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x14, 0x0400);
+
+ /* Write Analog register 23 */
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x17, 0x8E0D);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x14, 0x4417);
+
+ /* Enable fractional PLL */
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x17, 0x0005);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x14, 0x5C1B);
+
+ /* Program fraction FR_PLL_DIV1 */
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x17, 0x029A);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x14, 0x5C1D);
+
+ /* Program fraction FR_PLL_DIV1 */
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x17, 0xAAAA);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x14, 0x5C1C);
+
+ return genphy_config(phydev);
+}
+
+static struct phy_driver meson_gxl_phy_driver = {
+ .name = "Meson GXL Internal PHY",
+ .uid = 0x01814400,
+ .mask = 0xfffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .config = &meson_gxl_phy_config,
+ .startup = &genphy_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+int phy_meson_gxl_init(void)
+{
+ phy_register(&meson_gxl_phy_driver);
+
+ return 0;
+}
#ifdef CONFIG_PHY_MICREL_KSZ90X1
phy_micrel_ksz90x1_init();
#endif
+#ifdef CONFIG_PHY_MESON_GXL
+ phy_meson_gxl_init();
+#endif
#ifdef CONFIG_PHY_NATSEMI
phy_natsemi_init();
#endif
/* Configure bus number registers */
dm_pci_write_config8(dev, PCI_PRIMARY_BUS,
- PCI_BUS(dm_pci_get_bdf(dev)));
- dm_pci_write_config8(dev, PCI_SECONDARY_BUS, sub_bus);
+ PCI_BUS(dm_pci_get_bdf(dev)) - ctlr->seq);
+ dm_pci_write_config8(dev, PCI_SECONDARY_BUS, sub_bus - ctlr->seq);
dm_pci_write_config8(dev, PCI_SUBORDINATE_BUS, 0xff);
if (pci_mem) {
pci_io = ctlr_hose->pci_io;
/* Configure bus number registers */
- dm_pci_write_config8(dev, PCI_SUBORDINATE_BUS, sub_bus);
+ dm_pci_write_config8(dev, PCI_SUBORDINATE_BUS, sub_bus - ctlr->seq);
if (pci_mem) {
/* Round memory allocator to 1MB boundary */
/*
* MVEBU PCIe controller needs MEMORY and I/O BARs to be mapped
- * into SoCs address space. Each controller will map 32M of MEM
+ * into SoCs address space. Each controller will map 128M of MEM
* and 64K of I/O space when registered.
*/
static void __iomem *mvebu_pcie_membase = (void __iomem *)MBUS_PCI_MEM_BASE;
-#define PCIE_MEM_SIZE (32 << 20)
+#define PCIE_MEM_SIZE (128 << 20)
#if defined(CONFIG_ARMADA_38X)
#define PCIE_BASE(if) \
/* Accessing root port configuration space. */
va_address = (uintptr_t)pcie->ctrl_base;
} else {
+ d = PCI_MASK_BUS(d) | (PCI_BUS(d) - pcie->first_busno);
writel(d << 8, pcie->ctrl_base + PCIE_ATU_LOWER_TARGET);
va_address = (uintptr_t)pcie->cfg_base;
}
return 0;
}
- busdev = PCIE_ATU_BUS(PCI_BUS(bdf)) |
+ busdev = PCIE_ATU_BUS(PCI_BUS(bdf) - bus->seq) |
PCIE_ATU_DEV(PCI_DEV(bdf)) |
PCIE_ATU_FUNC(PCI_FUNC(bdf));
bool "Amlogic Meson GXBB SoC pinctrl driver"
select PINCTRL_MESON
+config PINCTRL_MESON_GXL
+ bool "Amlogic Meson GXL SoC pinctrl driver"
+ select PINCTRL_MESON
+
endif
obj-y += pinctrl-meson.o
obj-$(CONFIG_PINCTRL_MESON_GXBB) += pinctrl-meson-gxbb.o
+obj-$(CONFIG_PINCTRL_MESON_GXL) += pinctrl-meson-gxl.o
--- /dev/null
+/*
+ * (C) Copyright 2016 - Beniamino Galvani <b.galvani@gmail.com>
+ *
+ * Based on code from Linux kernel:
+ * Copyright (C) 2016 Endless Mobile, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dm/pinctrl.h>
+#include <dt-bindings/gpio/meson-gxl-gpio.h>
+
+#include "pinctrl-meson.h"
+
+#define EE_OFF 10
+
+static const unsigned int emmc_nand_d07_pins[] = {
+ PIN(BOOT_0, EE_OFF), PIN(BOOT_1, EE_OFF), PIN(BOOT_2, EE_OFF),
+ PIN(BOOT_3, EE_OFF), PIN(BOOT_4, EE_OFF), PIN(BOOT_5, EE_OFF),
+ PIN(BOOT_6, EE_OFF), PIN(BOOT_7, EE_OFF),
+};
+static const unsigned int emmc_clk_pins[] = { PIN(BOOT_8, EE_OFF) };
+static const unsigned int emmc_cmd_pins[] = { PIN(BOOT_10, EE_OFF) };
+static const unsigned int emmc_ds_pins[] = { PIN(BOOT_15, EE_OFF) };
+
+static const unsigned int nor_d_pins[] = { PIN(BOOT_11, EE_OFF) };
+static const unsigned int nor_q_pins[] = { PIN(BOOT_12, EE_OFF) };
+static const unsigned int nor_c_pins[] = { PIN(BOOT_13, EE_OFF) };
+static const unsigned int nor_cs_pins[] = { PIN(BOOT_15, EE_OFF) };
+
+static const unsigned int spi_mosi_pins[] = { PIN(GPIOX_8, EE_OFF) };
+static const unsigned int spi_miso_pins[] = { PIN(GPIOX_9, EE_OFF) };
+static const unsigned int spi_ss0_pins[] = { PIN(GPIOX_10, EE_OFF) };
+static const unsigned int spi_sclk_pins[] = { PIN(GPIOX_11, EE_OFF) };
+
+static const unsigned int sdcard_d0_pins[] = { PIN(CARD_1, EE_OFF) };
+static const unsigned int sdcard_d1_pins[] = { PIN(CARD_0, EE_OFF) };
+static const unsigned int sdcard_d2_pins[] = { PIN(CARD_5, EE_OFF) };
+static const unsigned int sdcard_d3_pins[] = { PIN(CARD_4, EE_OFF) };
+static const unsigned int sdcard_cmd_pins[] = { PIN(CARD_3, EE_OFF) };
+static const unsigned int sdcard_clk_pins[] = { PIN(CARD_2, EE_OFF) };
+
+static const unsigned int sdio_d0_pins[] = { PIN(GPIOX_0, EE_OFF) };
+static const unsigned int sdio_d1_pins[] = { PIN(GPIOX_1, EE_OFF) };
+static const unsigned int sdio_d2_pins[] = { PIN(GPIOX_2, EE_OFF) };
+static const unsigned int sdio_d3_pins[] = { PIN(GPIOX_3, EE_OFF) };
+static const unsigned int sdio_cmd_pins[] = { PIN(GPIOX_4, EE_OFF) };
+static const unsigned int sdio_clk_pins[] = { PIN(GPIOX_5, EE_OFF) };
+static const unsigned int sdio_irq_pins[] = { PIN(GPIOX_7, EE_OFF) };
+
+static const unsigned int nand_ce0_pins[] = { PIN(BOOT_8, EE_OFF) };
+static const unsigned int nand_ce1_pins[] = { PIN(BOOT_9, EE_OFF) };
+static const unsigned int nand_rb0_pins[] = { PIN(BOOT_10, EE_OFF) };
+static const unsigned int nand_ale_pins[] = { PIN(BOOT_11, EE_OFF) };
+static const unsigned int nand_cle_pins[] = { PIN(BOOT_12, EE_OFF) };
+static const unsigned int nand_wen_clk_pins[] = { PIN(BOOT_13, EE_OFF) };
+static const unsigned int nand_ren_wr_pins[] = { PIN(BOOT_14, EE_OFF) };
+static const unsigned int nand_dqs_pins[] = { PIN(BOOT_15, EE_OFF) };
+
+static const unsigned int uart_tx_a_pins[] = { PIN(GPIOX_12, EE_OFF) };
+static const unsigned int uart_rx_a_pins[] = { PIN(GPIOX_13, EE_OFF) };
+static const unsigned int uart_cts_a_pins[] = { PIN(GPIOX_14, EE_OFF) };
+static const unsigned int uart_rts_a_pins[] = { PIN(GPIOX_15, EE_OFF) };
+
+static const unsigned int uart_tx_b_pins[] = { PIN(GPIODV_24, EE_OFF) };
+static const unsigned int uart_rx_b_pins[] = { PIN(GPIODV_25, EE_OFF) };
+static const unsigned int uart_cts_b_pins[] = { PIN(GPIODV_26, EE_OFF) };
+static const unsigned int uart_rts_b_pins[] = { PIN(GPIODV_27, EE_OFF) };
+
+static const unsigned int uart_tx_c_pins[] = { PIN(GPIOX_8, EE_OFF) };
+static const unsigned int uart_rx_c_pins[] = { PIN(GPIOX_9, EE_OFF) };
+static const unsigned int uart_cts_c_pins[] = { PIN(GPIOX_10, EE_OFF) };
+static const unsigned int uart_rts_c_pins[] = { PIN(GPIOX_11, EE_OFF) };
+
+static const unsigned int i2c_sck_a_pins[] = { PIN(GPIODV_25, EE_OFF) };
+static const unsigned int i2c_sda_a_pins[] = { PIN(GPIODV_24, EE_OFF) };
+
+static const unsigned int i2c_sck_b_pins[] = { PIN(GPIODV_27, EE_OFF) };
+static const unsigned int i2c_sda_b_pins[] = { PIN(GPIODV_26, EE_OFF) };
+
+static const unsigned int i2c_sck_c_pins[] = { PIN(GPIODV_29, EE_OFF) };
+static const unsigned int i2c_sda_c_pins[] = { PIN(GPIODV_28, EE_OFF) };
+
+static const unsigned int i2c_sck_c_dv19_pins[] = { PIN(GPIODV_19, EE_OFF) };
+static const unsigned int i2c_sda_c_dv18_pins[] = { PIN(GPIODV_18, EE_OFF) };
+
+static const unsigned int eth_mdio_pins[] = { PIN(GPIOZ_0, EE_OFF) };
+static const unsigned int eth_mdc_pins[] = { PIN(GPIOZ_1, EE_OFF) };
+static const unsigned int eth_clk_rx_clk_pins[] = { PIN(GPIOZ_2, EE_OFF) };
+static const unsigned int eth_rx_dv_pins[] = { PIN(GPIOZ_3, EE_OFF) };
+static const unsigned int eth_rxd0_pins[] = { PIN(GPIOZ_4, EE_OFF) };
+static const unsigned int eth_rxd1_pins[] = { PIN(GPIOZ_5, EE_OFF) };
+static const unsigned int eth_rxd2_pins[] = { PIN(GPIOZ_6, EE_OFF) };
+static const unsigned int eth_rxd3_pins[] = { PIN(GPIOZ_7, EE_OFF) };
+static const unsigned int eth_rgmii_tx_clk_pins[] = { PIN(GPIOZ_8, EE_OFF) };
+static const unsigned int eth_tx_en_pins[] = { PIN(GPIOZ_9, EE_OFF) };
+static const unsigned int eth_txd0_pins[] = { PIN(GPIOZ_10, EE_OFF) };
+static const unsigned int eth_txd1_pins[] = { PIN(GPIOZ_11, EE_OFF) };
+static const unsigned int eth_txd2_pins[] = { PIN(GPIOZ_12, EE_OFF) };
+static const unsigned int eth_txd3_pins[] = { PIN(GPIOZ_13, EE_OFF) };
+
+static const unsigned int pwm_a_pins[] = { PIN(GPIOX_6, EE_OFF) };
+
+static const unsigned int pwm_b_pins[] = { PIN(GPIODV_29, EE_OFF) };
+
+static const unsigned int pwm_c_pins[] = { PIN(GPIOZ_15, EE_OFF) };
+
+static const unsigned int pwm_d_pins[] = { PIN(GPIODV_28, EE_OFF) };
+
+static const unsigned int pwm_e_pins[] = { PIN(GPIOX_16, EE_OFF) };
+
+static const unsigned int pwm_f_clk_pins[] = { PIN(GPIOCLK_1, EE_OFF) };
+static const unsigned int pwm_f_x_pins[] = { PIN(GPIOX_7, EE_OFF) };
+
+static const unsigned int hdmi_hpd_pins[] = { PIN(GPIOH_0, EE_OFF) };
+static const unsigned int hdmi_sda_pins[] = { PIN(GPIOH_1, EE_OFF) };
+static const unsigned int hdmi_scl_pins[] = { PIN(GPIOH_2, EE_OFF) };
+
+static const unsigned int i2s_am_clk_pins[] = { PIN(GPIOH_6, EE_OFF) };
+static const unsigned int i2s_out_ao_clk_pins[] = { PIN(GPIOH_7, EE_OFF) };
+static const unsigned int i2s_out_lr_clk_pins[] = { PIN(GPIOH_8, EE_OFF) };
+static const unsigned int i2s_out_ch01_pins[] = { PIN(GPIOH_9, EE_OFF) };
+static const unsigned int i2s_out_ch23_z_pins[] = { PIN(GPIOZ_5, EE_OFF) };
+static const unsigned int i2s_out_ch45_z_pins[] = { PIN(GPIOZ_6, EE_OFF) };
+static const unsigned int i2s_out_ch67_z_pins[] = { PIN(GPIOZ_7, EE_OFF) };
+
+static const unsigned int spdif_out_h_pins[] = { PIN(GPIOH_4, EE_OFF) };
+
+static const unsigned int eth_link_led_pins[] = { PIN(GPIOZ_14, EE_OFF) };
+static const unsigned int eth_act_led_pins[] = { PIN(GPIOZ_15, EE_OFF) };
+
+static const unsigned int tsin_a_d0_pins[] = { PIN(GPIODV_0, EE_OFF) };
+static const unsigned int tsin_a_d0_x_pins[] = { PIN(GPIOX_10, EE_OFF) };
+static const unsigned int tsin_a_clk_pins[] = { PIN(GPIODV_8, EE_OFF) };
+static const unsigned int tsin_a_clk_x_pins[] = { PIN(GPIOX_11, EE_OFF) };
+static const unsigned int tsin_a_sop_pins[] = { PIN(GPIODV_9, EE_OFF) };
+static const unsigned int tsin_a_sop_x_pins[] = { PIN(GPIOX_8, EE_OFF) };
+static const unsigned int tsin_a_d_valid_pins[] = { PIN(GPIODV_10, EE_OFF) };
+static const unsigned int tsin_a_d_valid_x_pins[] = { PIN(GPIOX_9, EE_OFF) };
+static const unsigned int tsin_a_fail_pins[] = { PIN(GPIODV_11, EE_OFF) };
+static const unsigned int tsin_a_dp_pins[] = {
+ PIN(GPIODV_1, EE_OFF),
+ PIN(GPIODV_2, EE_OFF),
+ PIN(GPIODV_3, EE_OFF),
+ PIN(GPIODV_4, EE_OFF),
+ PIN(GPIODV_5, EE_OFF),
+ PIN(GPIODV_6, EE_OFF),
+ PIN(GPIODV_7, EE_OFF),
+};
+
+static const unsigned int uart_tx_ao_a_pins[] = { PIN(GPIOAO_0, 0) };
+static const unsigned int uart_rx_ao_a_pins[] = { PIN(GPIOAO_1, 0) };
+static const unsigned int uart_tx_ao_b_0_pins[] = { PIN(GPIOAO_0, 0) };
+static const unsigned int uart_rx_ao_b_1_pins[] = { PIN(GPIOAO_1, 0) };
+static const unsigned int uart_cts_ao_a_pins[] = { PIN(GPIOAO_2, 0) };
+static const unsigned int uart_rts_ao_a_pins[] = { PIN(GPIOAO_3, 0) };
+static const unsigned int uart_tx_ao_b_pins[] = { PIN(GPIOAO_4, 0) };
+static const unsigned int uart_rx_ao_b_pins[] = { PIN(GPIOAO_5, 0) };
+static const unsigned int uart_cts_ao_b_pins[] = { PIN(GPIOAO_2, 0) };
+static const unsigned int uart_rts_ao_b_pins[] = { PIN(GPIOAO_3, 0) };
+
+static const unsigned int i2c_sck_ao_pins[] = {PIN(GPIOAO_4, 0) };
+static const unsigned int i2c_sda_ao_pins[] = {PIN(GPIOAO_5, 0) };
+static const unsigned int i2c_slave_sck_ao_pins[] = {PIN(GPIOAO_4, 0) };
+static const unsigned int i2c_slave_sda_ao_pins[] = {PIN(GPIOAO_5, 0) };
+
+static const unsigned int remote_input_ao_pins[] = {PIN(GPIOAO_7, 0) };
+
+static const unsigned int pwm_ao_a_3_pins[] = { PIN(GPIOAO_3, 0) };
+static const unsigned int pwm_ao_a_8_pins[] = { PIN(GPIOAO_8, 0) };
+
+static const unsigned int pwm_ao_b_pins[] = { PIN(GPIOAO_9, 0) };
+static const unsigned int pwm_ao_b_6_pins[] = { PIN(GPIOAO_6, 0) };
+
+static const unsigned int i2s_out_ch23_ao_pins[] = { PIN(GPIOAO_8, 0) };
+static const unsigned int i2s_out_ch45_ao_pins[] = { PIN(GPIOAO_9, 0) };
+
+static const unsigned int spdif_out_ao_6_pins[] = { PIN(GPIOAO_6, 0) };
+static const unsigned int spdif_out_ao_9_pins[] = { PIN(GPIOAO_9, 0) };
+
+static const unsigned int ao_cec_pins[] = { PIN(GPIOAO_8, 0) };
+static const unsigned int ee_cec_pins[] = { PIN(GPIOAO_8, 0) };
+
+static struct meson_pmx_group meson_gxl_periphs_groups[] = {
+ GPIO_GROUP(GPIOZ_0, EE_OFF),
+ GPIO_GROUP(GPIOZ_1, EE_OFF),
+ GPIO_GROUP(GPIOZ_2, EE_OFF),
+ GPIO_GROUP(GPIOZ_3, EE_OFF),
+ GPIO_GROUP(GPIOZ_4, EE_OFF),
+ GPIO_GROUP(GPIOZ_5, EE_OFF),
+ GPIO_GROUP(GPIOZ_6, EE_OFF),
+ GPIO_GROUP(GPIOZ_7, EE_OFF),
+ GPIO_GROUP(GPIOZ_8, EE_OFF),
+ GPIO_GROUP(GPIOZ_9, EE_OFF),
+ GPIO_GROUP(GPIOZ_10, EE_OFF),
+ GPIO_GROUP(GPIOZ_11, EE_OFF),
+ GPIO_GROUP(GPIOZ_12, EE_OFF),
+ GPIO_GROUP(GPIOZ_13, EE_OFF),
+ GPIO_GROUP(GPIOZ_14, EE_OFF),
+ GPIO_GROUP(GPIOZ_15, EE_OFF),
+
+ GPIO_GROUP(GPIOH_0, EE_OFF),
+ GPIO_GROUP(GPIOH_1, EE_OFF),
+ GPIO_GROUP(GPIOH_2, EE_OFF),
+ GPIO_GROUP(GPIOH_3, EE_OFF),
+ GPIO_GROUP(GPIOH_4, EE_OFF),
+ GPIO_GROUP(GPIOH_5, EE_OFF),
+ GPIO_GROUP(GPIOH_6, EE_OFF),
+ GPIO_GROUP(GPIOH_7, EE_OFF),
+ GPIO_GROUP(GPIOH_8, EE_OFF),
+ GPIO_GROUP(GPIOH_9, EE_OFF),
+
+ GPIO_GROUP(BOOT_0, EE_OFF),
+ GPIO_GROUP(BOOT_1, EE_OFF),
+ GPIO_GROUP(BOOT_2, EE_OFF),
+ GPIO_GROUP(BOOT_3, EE_OFF),
+ GPIO_GROUP(BOOT_4, EE_OFF),
+ GPIO_GROUP(BOOT_5, EE_OFF),
+ GPIO_GROUP(BOOT_6, EE_OFF),
+ GPIO_GROUP(BOOT_7, EE_OFF),
+ GPIO_GROUP(BOOT_8, EE_OFF),
+ GPIO_GROUP(BOOT_9, EE_OFF),
+ GPIO_GROUP(BOOT_10, EE_OFF),
+ GPIO_GROUP(BOOT_11, EE_OFF),
+ GPIO_GROUP(BOOT_12, EE_OFF),
+ GPIO_GROUP(BOOT_13, EE_OFF),
+ GPIO_GROUP(BOOT_14, EE_OFF),
+ GPIO_GROUP(BOOT_15, EE_OFF),
+
+ GPIO_GROUP(CARD_0, EE_OFF),
+ GPIO_GROUP(CARD_1, EE_OFF),
+ GPIO_GROUP(CARD_2, EE_OFF),
+ GPIO_GROUP(CARD_3, EE_OFF),
+ GPIO_GROUP(CARD_4, EE_OFF),
+ GPIO_GROUP(CARD_5, EE_OFF),
+ GPIO_GROUP(CARD_6, EE_OFF),
+
+ GPIO_GROUP(GPIODV_0, EE_OFF),
+ GPIO_GROUP(GPIODV_1, EE_OFF),
+ GPIO_GROUP(GPIODV_2, EE_OFF),
+ GPIO_GROUP(GPIODV_3, EE_OFF),
+ GPIO_GROUP(GPIODV_4, EE_OFF),
+ GPIO_GROUP(GPIODV_5, EE_OFF),
+ GPIO_GROUP(GPIODV_6, EE_OFF),
+ GPIO_GROUP(GPIODV_7, EE_OFF),
+ GPIO_GROUP(GPIODV_8, EE_OFF),
+ GPIO_GROUP(GPIODV_9, EE_OFF),
+ GPIO_GROUP(GPIODV_10, EE_OFF),
+ GPIO_GROUP(GPIODV_11, EE_OFF),
+ GPIO_GROUP(GPIODV_12, EE_OFF),
+ GPIO_GROUP(GPIODV_13, EE_OFF),
+ GPIO_GROUP(GPIODV_14, EE_OFF),
+ GPIO_GROUP(GPIODV_15, EE_OFF),
+ GPIO_GROUP(GPIODV_16, EE_OFF),
+ GPIO_GROUP(GPIODV_17, EE_OFF),
+ GPIO_GROUP(GPIODV_19, EE_OFF),
+ GPIO_GROUP(GPIODV_20, EE_OFF),
+ GPIO_GROUP(GPIODV_21, EE_OFF),
+ GPIO_GROUP(GPIODV_22, EE_OFF),
+ GPIO_GROUP(GPIODV_23, EE_OFF),
+ GPIO_GROUP(GPIODV_24, EE_OFF),
+ GPIO_GROUP(GPIODV_25, EE_OFF),
+ GPIO_GROUP(GPIODV_26, EE_OFF),
+ GPIO_GROUP(GPIODV_27, EE_OFF),
+ GPIO_GROUP(GPIODV_28, EE_OFF),
+ GPIO_GROUP(GPIODV_29, EE_OFF),
+
+ GPIO_GROUP(GPIOX_0, EE_OFF),
+ GPIO_GROUP(GPIOX_1, EE_OFF),
+ GPIO_GROUP(GPIOX_2, EE_OFF),
+ GPIO_GROUP(GPIOX_3, EE_OFF),
+ GPIO_GROUP(GPIOX_4, EE_OFF),
+ GPIO_GROUP(GPIOX_5, EE_OFF),
+ GPIO_GROUP(GPIOX_6, EE_OFF),
+ GPIO_GROUP(GPIOX_7, EE_OFF),
+ GPIO_GROUP(GPIOX_8, EE_OFF),
+ GPIO_GROUP(GPIOX_9, EE_OFF),
+ GPIO_GROUP(GPIOX_10, EE_OFF),
+ GPIO_GROUP(GPIOX_11, EE_OFF),
+ GPIO_GROUP(GPIOX_12, EE_OFF),
+ GPIO_GROUP(GPIOX_13, EE_OFF),
+ GPIO_GROUP(GPIOX_14, EE_OFF),
+ GPIO_GROUP(GPIOX_15, EE_OFF),
+ GPIO_GROUP(GPIOX_16, EE_OFF),
+ GPIO_GROUP(GPIOX_17, EE_OFF),
+ GPIO_GROUP(GPIOX_18, EE_OFF),
+
+ GPIO_GROUP(GPIOCLK_0, EE_OFF),
+ GPIO_GROUP(GPIOCLK_1, EE_OFF),
+
+ GPIO_GROUP(GPIO_TEST_N, EE_OFF),
+
+ /* Bank X */
+ GROUP(sdio_d0, 5, 31),
+ GROUP(sdio_d1, 5, 30),
+ GROUP(sdio_d2, 5, 29),
+ GROUP(sdio_d3, 5, 28),
+ GROUP(sdio_clk, 5, 27),
+ GROUP(sdio_cmd, 5, 26),
+ GROUP(sdio_irq, 5, 24),
+ GROUP(uart_tx_a, 5, 19),
+ GROUP(uart_rx_a, 5, 18),
+ GROUP(uart_cts_a, 5, 17),
+ GROUP(uart_rts_a, 5, 16),
+ GROUP(uart_tx_c, 5, 13),
+ GROUP(uart_rx_c, 5, 12),
+ GROUP(uart_cts_c, 5, 11),
+ GROUP(uart_rts_c, 5, 10),
+ GROUP(pwm_a, 5, 25),
+ GROUP(pwm_e, 5, 15),
+ GROUP(pwm_f_x, 5, 14),
+ GROUP(spi_mosi, 5, 3),
+ GROUP(spi_miso, 5, 2),
+ GROUP(spi_ss0, 5, 1),
+ GROUP(spi_sclk, 5, 0),
+ GROUP(tsin_a_sop_x, 6, 3),
+ GROUP(tsin_a_d_valid_x, 6, 2),
+ GROUP(tsin_a_d0_x, 6, 1),
+ GROUP(tsin_a_clk_x, 6, 0),
+
+ /* Bank Z */
+ GROUP(eth_mdio, 4, 23),
+ GROUP(eth_mdc, 4, 22),
+ GROUP(eth_clk_rx_clk, 4, 21),
+ GROUP(eth_rx_dv, 4, 20),
+ GROUP(eth_rxd0, 4, 19),
+ GROUP(eth_rxd1, 4, 18),
+ GROUP(eth_rxd2, 4, 17),
+ GROUP(eth_rxd3, 4, 16),
+ GROUP(eth_rgmii_tx_clk, 4, 15),
+ GROUP(eth_tx_en, 4, 14),
+ GROUP(eth_txd0, 4, 13),
+ GROUP(eth_txd1, 4, 12),
+ GROUP(eth_txd2, 4, 11),
+ GROUP(eth_txd3, 4, 10),
+ GROUP(pwm_c, 3, 20),
+ GROUP(i2s_out_ch23_z, 3, 26),
+ GROUP(i2s_out_ch45_z, 3, 25),
+ GROUP(i2s_out_ch67_z, 3, 24),
+ GROUP(eth_link_led, 4, 25),
+ GROUP(eth_act_led, 4, 24),
+
+ /* Bank H */
+ GROUP(hdmi_hpd, 6, 31),
+ GROUP(hdmi_sda, 6, 30),
+ GROUP(hdmi_scl, 6, 29),
+ GROUP(i2s_am_clk, 6, 26),
+ GROUP(i2s_out_ao_clk, 6, 25),
+ GROUP(i2s_out_lr_clk, 6, 24),
+ GROUP(i2s_out_ch01, 6, 23),
+ GROUP(spdif_out_h, 6, 28),
+
+ /* Bank DV */
+ GROUP(uart_tx_b, 2, 16),
+ GROUP(uart_rx_b, 2, 15),
+ GROUP(uart_cts_b, 2, 14),
+ GROUP(uart_rts_b, 2, 13),
+ GROUP(i2c_sda_c_dv18, 1, 17),
+ GROUP(i2c_sck_c_dv19, 1, 16),
+ GROUP(i2c_sda_a, 1, 15),
+ GROUP(i2c_sck_a, 1, 14),
+ GROUP(i2c_sda_b, 1, 13),
+ GROUP(i2c_sck_b, 1, 12),
+ GROUP(i2c_sda_c, 1, 11),
+ GROUP(i2c_sck_c, 1, 10),
+ GROUP(pwm_b, 2, 11),
+ GROUP(pwm_d, 2, 12),
+ GROUP(tsin_a_d0, 2, 4),
+ GROUP(tsin_a_dp, 2, 3),
+ GROUP(tsin_a_clk, 2, 2),
+ GROUP(tsin_a_sop, 2, 1),
+ GROUP(tsin_a_d_valid, 2, 0),
+ GROUP(tsin_a_fail, 1, 31),
+
+ /* Bank BOOT */
+ GROUP(emmc_nand_d07, 7, 31),
+ GROUP(emmc_clk, 7, 30),
+ GROUP(emmc_cmd, 7, 29),
+ GROUP(emmc_ds, 7, 28),
+ GROUP(nor_d, 7, 13),
+ GROUP(nor_q, 7, 12),
+ GROUP(nor_c, 7, 11),
+ GROUP(nor_cs, 7, 10),
+ GROUP(nand_ce0, 7, 7),
+ GROUP(nand_ce1, 7, 6),
+ GROUP(nand_rb0, 7, 5),
+ GROUP(nand_ale, 7, 4),
+ GROUP(nand_cle, 7, 3),
+ GROUP(nand_wen_clk, 7, 2),
+ GROUP(nand_ren_wr, 7, 1),
+ GROUP(nand_dqs, 7, 0),
+
+ /* Bank CARD */
+ GROUP(sdcard_d1, 6, 5),
+ GROUP(sdcard_d0, 6, 4),
+ GROUP(sdcard_d3, 6, 1),
+ GROUP(sdcard_d2, 6, 0),
+ GROUP(sdcard_cmd, 6, 2),
+ GROUP(sdcard_clk, 6, 3),
+
+ /* Bank CLK */
+ GROUP(pwm_f_clk, 8, 30),
+};
+
+static struct meson_pmx_group meson_gxl_aobus_groups[] = {
+ GPIO_GROUP(GPIOAO_0, 0),
+ GPIO_GROUP(GPIOAO_1, 0),
+ GPIO_GROUP(GPIOAO_2, 0),
+ GPIO_GROUP(GPIOAO_3, 0),
+ GPIO_GROUP(GPIOAO_4, 0),
+ GPIO_GROUP(GPIOAO_5, 0),
+ GPIO_GROUP(GPIOAO_6, 0),
+ GPIO_GROUP(GPIOAO_7, 0),
+ GPIO_GROUP(GPIOAO_8, 0),
+ GPIO_GROUP(GPIOAO_9, 0),
+
+ /* bank AO */
+ GROUP(uart_tx_ao_b_0, 0, 26),
+ GROUP(uart_rx_ao_b_1, 0, 25),
+ GROUP(uart_tx_ao_b, 0, 24),
+ GROUP(uart_rx_ao_b, 0, 23),
+ GROUP(uart_tx_ao_a, 0, 12),
+ GROUP(uart_rx_ao_a, 0, 11),
+ GROUP(uart_cts_ao_a, 0, 10),
+ GROUP(uart_rts_ao_a, 0, 9),
+ GROUP(uart_cts_ao_b, 0, 8),
+ GROUP(uart_rts_ao_b, 0, 7),
+ GROUP(i2c_sck_ao, 0, 6),
+ GROUP(i2c_sda_ao, 0, 5),
+ GROUP(i2c_slave_sck_ao, 0, 2),
+ GROUP(i2c_slave_sda_ao, 0, 1),
+ GROUP(remote_input_ao, 0, 0),
+ GROUP(pwm_ao_a_3, 0, 22),
+ GROUP(pwm_ao_b_6, 0, 18),
+ GROUP(pwm_ao_a_8, 0, 17),
+ GROUP(pwm_ao_b, 0, 3),
+ GROUP(i2s_out_ch23_ao, 1, 0),
+ GROUP(i2s_out_ch45_ao, 1, 1),
+ GROUP(spdif_out_ao_6, 0, 16),
+ GROUP(spdif_out_ao_9, 0, 4),
+ GROUP(ao_cec, 0, 15),
+ GROUP(ee_cec, 0, 14),
+};
+
+static const char * const gpio_periphs_groups[] = {
+ "GPIOZ_0", "GPIOZ_1", "GPIOZ_2", "GPIOZ_3", "GPIOZ_4",
+ "GPIOZ_5", "GPIOZ_6", "GPIOZ_7", "GPIOZ_8", "GPIOZ_9",
+ "GPIOZ_10", "GPIOZ_11", "GPIOZ_12", "GPIOZ_13", "GPIOZ_14",
+ "GPIOZ_15",
+
+ "GPIOH_0", "GPIOH_1", "GPIOH_2", "GPIOH_3", "GPIOH_4",
+ "GPIOH_5", "GPIOH_6", "GPIOH_7", "GPIOH_8", "GPIOH_9",
+
+ "BOOT_0", "BOOT_1", "BOOT_2", "BOOT_3", "BOOT_4",
+ "BOOT_5", "BOOT_6", "BOOT_7", "BOOT_8", "BOOT_9",
+ "BOOT_10", "BOOT_11", "BOOT_12", "BOOT_13", "BOOT_14",
+ "BOOT_15",
+
+ "CARD_0", "CARD_1", "CARD_2", "CARD_3", "CARD_4",
+ "CARD_5", "CARD_6",
+
+ "GPIODV_0", "GPIODV_1", "GPIODV_2", "GPIODV_3", "GPIODV_4",
+ "GPIODV_5", "GPIODV_6", "GPIODV_7", "GPIODV_8", "GPIODV_9",
+ "GPIODV_10", "GPIODV_11", "GPIODV_12", "GPIODV_13", "GPIODV_14",
+ "GPIODV_15", "GPIODV_16", "GPIODV_17", "GPIODV_18", "GPIODV_19",
+ "GPIODV_20", "GPIODV_21", "GPIODV_22", "GPIODV_23", "GPIODV_24",
+ "GPIODV_25", "GPIODV_26", "GPIODV_27", "GPIODV_28", "GPIODV_29",
+
+ "GPIOX_0", "GPIOX_1", "GPIOX_2", "GPIOX_3", "GPIOX_4",
+ "GPIOX_5", "GPIOX_6", "GPIOX_7", "GPIOX_8", "GPIOX_9",
+ "GPIOX_10", "GPIOX_11", "GPIOX_12", "GPIOX_13", "GPIOX_14",
+ "GPIOX_15", "GPIOX_16", "GPIOX_17", "GPIOX_18",
+
+ "GPIO_TEST_N",
+};
+
+static const char * const emmc_groups[] = {
+ "emmc_nand_d07", "emmc_clk", "emmc_cmd", "emmc_ds",
+};
+
+static const char * const nor_groups[] = {
+ "nor_d", "nor_q", "nor_c", "nor_cs",
+};
+
+static const char * const spi_groups[] = {
+ "spi_mosi", "spi_miso", "spi_ss0", "spi_sclk",
+};
+
+static const char * const sdcard_groups[] = {
+ "sdcard_d0", "sdcard_d1", "sdcard_d2", "sdcard_d3",
+ "sdcard_cmd", "sdcard_clk",
+};
+
+static const char * const sdio_groups[] = {
+ "sdio_d0", "sdio_d1", "sdio_d2", "sdio_d3",
+ "sdio_cmd", "sdio_clk", "sdio_irq",
+};
+
+static const char * const nand_groups[] = {
+ "nand_ce0", "nand_ce1", "nand_rb0", "nand_ale", "nand_cle",
+ "nand_wen_clk", "nand_ren_wr", "nand_dqs",
+};
+
+static const char * const uart_a_groups[] = {
+ "uart_tx_a", "uart_rx_a", "uart_cts_a", "uart_rts_a",
+};
+
+static const char * const uart_b_groups[] = {
+ "uart_tx_b", "uart_rx_b", "uart_cts_b", "uart_rts_b",
+};
+
+static const char * const uart_c_groups[] = {
+ "uart_tx_c", "uart_rx_c", "uart_cts_c", "uart_rts_c",
+};
+
+static const char * const i2c_a_groups[] = {
+ "i2c_sck_a", "i2c_sda_a",
+};
+
+static const char * const i2c_b_groups[] = {
+ "i2c_sck_b", "i2c_sda_b",
+};
+
+static const char * const i2c_c_groups[] = {
+ "i2c_sck_c", "i2c_sda_c", "i2c_sda_c_dv18", "i2c_sck_c_dv19",
+};
+
+static const char * const eth_groups[] = {
+ "eth_mdio", "eth_mdc", "eth_clk_rx_clk", "eth_rx_dv",
+ "eth_rxd0", "eth_rxd1", "eth_rxd2", "eth_rxd3",
+ "eth_rgmii_tx_clk", "eth_tx_en",
+ "eth_txd0", "eth_txd1", "eth_txd2", "eth_txd3",
+};
+
+static const char * const pwm_a_groups[] = {
+ "pwm_a",
+};
+
+static const char * const pwm_b_groups[] = {
+ "pwm_b",
+};
+
+static const char * const pwm_c_groups[] = {
+ "pwm_c",
+};
+
+static const char * const pwm_d_groups[] = {
+ "pwm_d",
+};
+
+static const char * const pwm_e_groups[] = {
+ "pwm_e",
+};
+
+static const char * const pwm_f_groups[] = {
+ "pwm_f_clk", "pwm_f_x",
+};
+
+static const char * const hdmi_hpd_groups[] = {
+ "hdmi_hpd",
+};
+
+static const char * const hdmi_i2c_groups[] = {
+ "hdmi_sda", "hdmi_scl",
+};
+
+static const char * const i2s_out_groups[] = {
+ "i2s_am_clk", "i2s_out_ao_clk", "i2s_out_lr_clk",
+ "i2s_out_ch01", "i2s_out_ch23_z", "i2s_out_ch45_z", "i2s_out_ch67_z",
+};
+
+static const char * const spdif_out_groups[] = {
+ "spdif_out_h",
+};
+
+static const char * const eth_led_groups[] = {
+ "eth_link_led", "eth_act_led",
+};
+
+static const char * const tsin_a_groups[] = {
+ "tsin_a_clk", "tsin_a_clk_x", "tsin_a_sop", "tsin_a_sop_x",
+ "tsin_a_d_valid", "tsin_a_d_valid_x", "tsin_a_d0", "tsin_a_d0_x",
+ "tsin_a_dp", "tsin_a_fail",
+};
+
+static const char * const gpio_aobus_groups[] = {
+ "GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3", "GPIOAO_4",
+ "GPIOAO_5", "GPIOAO_6", "GPIOAO_7", "GPIOAO_8", "GPIOAO_9",
+};
+
+static const char * const uart_ao_groups[] = {
+ "uart_tx_ao_a", "uart_rx_ao_a", "uart_cts_ao_a", "uart_rts_ao_a",
+};
+
+static const char * const uart_ao_b_groups[] = {
+ "uart_tx_ao_b", "uart_rx_ao_b", "uart_cts_ao_b", "uart_rts_ao_b",
+ "uart_tx_ao_b_0", "uart_rx_ao_b_1",
+};
+
+static const char * const i2c_ao_groups[] = {
+ "i2c_sck_ao", "i2c_sda_ao",
+};
+
+static const char * const i2c_slave_ao_groups[] = {
+ "i2c_slave_sck_ao", "i2c_slave_sda_ao",
+};
+
+static const char * const remote_input_ao_groups[] = {
+ "remote_input_ao",
+};
+
+static const char * const pwm_ao_a_groups[] = {
+ "pwm_ao_a_3", "pwm_ao_a_8",
+};
+
+static const char * const pwm_ao_b_groups[] = {
+ "pwm_ao_b", "pwm_ao_b_6",
+};
+
+static const char * const i2s_out_ao_groups[] = {
+ "i2s_out_ch23_ao", "i2s_out_ch45_ao",
+};
+
+static const char * const spdif_out_ao_groups[] = {
+ "spdif_out_ao_6", "spdif_out_ao_9",
+};
+
+static const char * const cec_ao_groups[] = {
+ "ao_cec", "ee_cec",
+};
+
+static struct meson_pmx_func meson_gxl_periphs_functions[] = {
+ FUNCTION(gpio_periphs),
+ FUNCTION(emmc),
+ FUNCTION(nor),
+ FUNCTION(spi),
+ FUNCTION(sdcard),
+ FUNCTION(sdio),
+ FUNCTION(nand),
+ FUNCTION(uart_a),
+ FUNCTION(uart_b),
+ FUNCTION(uart_c),
+ FUNCTION(i2c_a),
+ FUNCTION(i2c_b),
+ FUNCTION(i2c_c),
+ FUNCTION(eth),
+ FUNCTION(pwm_a),
+ FUNCTION(pwm_b),
+ FUNCTION(pwm_c),
+ FUNCTION(pwm_d),
+ FUNCTION(pwm_e),
+ FUNCTION(pwm_f),
+ FUNCTION(hdmi_hpd),
+ FUNCTION(hdmi_i2c),
+ FUNCTION(i2s_out),
+ FUNCTION(spdif_out),
+ FUNCTION(eth_led),
+ FUNCTION(tsin_a),
+};
+
+static struct meson_pmx_func meson_gxl_aobus_functions[] = {
+ FUNCTION(gpio_aobus),
+ FUNCTION(uart_ao),
+ FUNCTION(uart_ao_b),
+ FUNCTION(i2c_ao),
+ FUNCTION(i2c_slave_ao),
+ FUNCTION(remote_input_ao),
+ FUNCTION(pwm_ao_a),
+ FUNCTION(pwm_ao_b),
+ FUNCTION(i2s_out_ao),
+ FUNCTION(spdif_out_ao),
+ FUNCTION(cec_ao),
+};
+
+static struct meson_bank meson_gxl_periphs_banks[] = {
+ /* name first last pullen pull dir out in */
+ BANK("X", PIN(GPIOX_0, EE_OFF), PIN(GPIOX_18, EE_OFF), 4, 0, 4, 0, 12, 0, 13, 0, 14, 0),
+ BANK("DV", PIN(GPIODV_0, EE_OFF), PIN(GPIODV_29, EE_OFF), 0, 0, 0, 0, 0, 0, 1, 0, 2, 0),
+ BANK("H", PIN(GPIOH_0, EE_OFF), PIN(GPIOH_9, EE_OFF), 1, 20, 1, 20, 3, 20, 4, 20, 5, 20),
+ BANK("Z", PIN(GPIOZ_0, EE_OFF), PIN(GPIOZ_15, EE_OFF), 3, 0, 3, 0, 9, 0, 10, 0, 11, 0),
+ BANK("CARD", PIN(CARD_0, EE_OFF), PIN(CARD_6, EE_OFF), 2, 20, 2, 20, 6, 20, 7, 20, 8, 20),
+ BANK("BOOT", PIN(BOOT_0, EE_OFF), PIN(BOOT_15, EE_OFF), 2, 0, 2, 0, 6, 0, 7, 0, 8, 0),
+ BANK("CLK", PIN(GPIOCLK_0, EE_OFF), PIN(GPIOCLK_1, EE_OFF), 3, 28, 3, 28, 9, 28, 10, 28, 11, 28),
+};
+
+static struct meson_bank meson_gxl_aobus_banks[] = {
+ /* name first last pullen pull dir out in */
+ BANK("AO", PIN(GPIOAO_0, 0), PIN(GPIOAO_9, 0), 0, 0, 0, 16, 0, 0, 0, 16, 1, 0),
+};
+
+struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data = {
+ .name = "periphs-banks",
+ .pin_base = 10,
+ .groups = meson_gxl_periphs_groups,
+ .funcs = meson_gxl_periphs_functions,
+ .banks = meson_gxl_periphs_banks,
+ .num_pins = 101,
+ .num_groups = ARRAY_SIZE(meson_gxl_periphs_groups),
+ .num_funcs = ARRAY_SIZE(meson_gxl_periphs_functions),
+ .num_banks = ARRAY_SIZE(meson_gxl_periphs_banks),
+};
+
+struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data = {
+ .name = "aobus-banks",
+ .pin_base = 0,
+ .groups = meson_gxl_aobus_groups,
+ .funcs = meson_gxl_aobus_functions,
+ .banks = meson_gxl_aobus_banks,
+ .num_pins = 10,
+ .num_groups = ARRAY_SIZE(meson_gxl_aobus_groups),
+ .num_funcs = ARRAY_SIZE(meson_gxl_aobus_functions),
+ .num_banks = ARRAY_SIZE(meson_gxl_aobus_banks),
+};
+
+static const struct udevice_id meson_gxl_pinctrl_match[] = {
+ {
+ .compatible = "amlogic,meson-gxl-periphs-pinctrl",
+ .data = (ulong)&meson_gxl_periphs_pinctrl_data,
+ },
+ {
+ .compatible = "amlogic,meson-gxl-aobus-pinctrl",
+ .data = (ulong)&meson_gxl_aobus_pinctrl_data,
+ },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(meson_gxl_pinctrl) = {
+ .name = "meson-gxl-pinctrl",
+ .id = UCLASS_PINCTRL,
+ .of_match = of_match_ptr(meson_gxl_pinctrl_match),
+ .probe = meson_pinctrl_probe,
+ .priv_auto_alloc_size = sizeof(struct meson_pinctrl),
+ .ops = &meson_pinctrl_ops,
+};
return -EAGAIN;
}
+static int nulldev_serial_pending(struct udevice *dev, bool input)
+{
+ return 0;
+}
+
static int nulldev_serial_input(struct udevice *dev)
{
return 0;
const struct dm_serial_ops nulldev_serial_ops = {
.putc = nulldev_serial_putc,
+ .pending = nulldev_serial_pending,
.getc = nulldev_serial_getc,
.setbrg = nulldev_serial_setbrg,
};
* Dummy implementation that can be overwritten by a board
* specific function
*/
-__weak int board_xhci_enable(void)
+__weak int board_xhci_enable(fdt_addr_t base)
{
return 0;
}
}
/* Enable USB xHCI (VBUS, reset etc) in board specific code */
- board_xhci_enable();
+ board_xhci_enable(devfdt_get_addr_index(dev, 1));
return xhci_register(dev, ctx->hcd, hcor);
}
static const struct udevice_id xhci_usb_ids[] = {
{ .compatible = "marvell,armada3700-xhci" },
+ { .compatible = "marvell,armada-380-xhci" },
{ .compatible = "marvell,armada-8k-xhci" },
{ }
};
config DTC
bool
+config PYLIBFDT
+ bool
+
+config DTOC
+ bool
+ select PYLIBFDT
+
+config BINMAN
+ bool
+ select DTOC
+
menu "Device Tree Control"
depends on SUPPORT_OF_CONTROL
config SPL_OF_PLATDATA
bool "Generate platform data for use in SPL"
depends on SPL_OF_CONTROL
+ select DTOC
help
For very constrained SPL environments the overhead of decoding
device tree nodes and converting their contents into platform data
config TPL_OF_PLATDATA
bool "Generate platform data for use in TPL"
depends on TPL_OF_CONTROL
+ select DTOC
help
For very constrained SPL environments the overhead of decoding
device tree nodes and converting their contents into platform data
#include <malloc.h>
#include <memalign.h>
#include <mmc.h>
+#include <part.h>
#include <search.h>
#include <errno.h>
+#define __STR(X) #X
+#define STR(X) __STR(X)
+
#if defined(CONFIG_ENV_SIZE_REDUND) && \
(CONFIG_ENV_SIZE_REDUND != CONFIG_ENV_SIZE)
#error CONFIG_ENV_SIZE_REDUND should be the same as CONFIG_ENV_SIZE
#endif
#if CONFIG_IS_ENABLED(OF_CONTROL)
+static inline int mmc_offset_try_partition(const char *str, s64 *val)
+{
+ disk_partition_t info;
+ struct blk_desc *desc;
+ int len, i, ret;
+
+ ret = blk_get_device_by_str("mmc", STR(CONFIG_SYS_MMC_ENV_DEV), &desc);
+ if (ret < 0)
+ return (ret);
+
+ for (i = 1;;i++) {
+ ret = part_get_info(desc, i, &info);
+ if (ret < 0)
+ return ret;
+
+ if (!strncmp((const char *)info.name, str, sizeof(str)))
+ break;
+ }
+
+ /* round up to info.blksz */
+ len = (CONFIG_ENV_SIZE + info.blksz - 1) & ~(info.blksz - 1);
+
+ /* use the top of the partion for the environment */
+ *val = (info.start + info.size - 1) - len / info.blksz;
+
+ return 0;
+}
+
static inline s64 mmc_offset(int copy)
{
- const char *propname = "u-boot,mmc-env-offset";
- s64 defvalue = CONFIG_ENV_OFFSET;
+ const struct {
+ const char *offset_redund;
+ const char *partition;
+ const char *offset;
+ } dt_prop = {
+ .offset_redund = "u-boot,mmc-env-offset-redundant",
+ .partition = "u-boot,mmc-env-partition",
+ .offset = "u-boot,mmc-env-offset",
+ };
+ s64 val, defvalue;
+ const char *propname;
+ const char *str;
+ int err;
+
+ /* look for the partition in mmc CONFIG_SYS_MMC_ENV_DEV */
+ str = fdtdec_get_config_string(gd->fdt_blob, dt_prop.partition);
+ if (str) {
+ /* try to place the environment at end of the partition */
+ err = mmc_offset_try_partition(str, &val);
+ if (!err)
+ return val;
+ }
+
+ defvalue = CONFIG_ENV_OFFSET;
+ propname = dt_prop.offset;
#if defined(CONFIG_ENV_OFFSET_REDUND)
if (copy) {
- propname = "u-boot,mmc-env-offset-redundant";
defvalue = CONFIG_ENV_OFFSET_REDUND;
+ propname = dt_prop.offset_redund;
}
#endif
-
return fdtdec_get_config_int(gd->fdt_blob, propname, defvalue);
}
#else
func(PXE, pxe, na) \
func(DHCP, dhcp, na)
-#define CONFIG_BOOTCOMMAND \
- "if test ${boot_fit} -eq 1; then " \
- "run update_to_fit;" \
- "fi;" \
- "run findfdt; " \
- "run init_console; " \
- "run envboot; " \
- "run distro_bootcmd"
-
#include <config_distro_bootcmd.h>
#ifndef CONFIG_SPL_BUILD
#undef CONFIG_SERVERIP
#define CONFIG_SERVERIP 192.168.10.1
-#define CONFIG_BOOTCOMMAND \
- "run emmcboot; setenv fdtfile ${soc}-apalis-${fdt_board}.dtb && " \
- "run distro_bootcmd"
-
#define DFU_ALT_EMMC_INFO "apalis-tk1.img raw 0x0 0x500 mmcpart 1; " \
"boot part 0 1 mmcpart 0; " \
"rootfs part 0 2 mmcpart 0; " \
#define CONFIG_SYS_I2C_SPEED 100000
/* SPI NOR flash default params, used by sf commands */
-#define CONFIG_SF_DEFAULT_SPEED 1000000
-#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
-#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SF_DEFAULT_BUS 1
/*
* SDIO/MMC Card Configuration
BOOTENV
#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_SYS_MMC_ENV_DEV 0 /* mmc0 = emmc, mmc1 = sd */
#define CONFIG_ENV_VARS_UBOOT_CONFIG
/* Size of malloc() pool */
func(PXE, PXE, na) \
func(DHCP, dhcp, na)
-#define CONFIG_BOOTCOMMAND \
- "run findfdt; " \
- "run distro_bootcmd"
-
#include <config_distro_bootcmd.h>
#define CONFIG_ARP_TIMEOUT 200UL
func(PXE, pxe, na) \
func(DHCP, dhcp, na)
-#define CONFIG_BOOTCOMMAND \
- "run finduuid; " \
- "run distro_bootcmd"
-
#include <config_distro_bootcmd.h>
#define CONSOLE_STDIN_SETTINGS \
"ramdisk_addr_r=0xa0000000\0" \
"load_addr=0xa0000000\0" \
"kernel_size=0x2800000\0" \
+ "kernel_addr_sd=0x8000\0" \
+ "kernel_size_sd=0x14000\0" \
BOOTENV \
"boot_scripts=ls1021atwr_boot.scr\0" \
"boot_script_hdr=hdr_ls1021atwr_bs.out\0" \
"${scripthdraddr} ${prefix}${boot_script_hdr} " \
"&& esbc_validate ${scripthdraddr};" \
"source ${scriptaddr}\0" \
- "installer=load mmc 0:2 $load_addr " \
- "/flex_installer_arm32.itb; " \
- "bootm $load_addr#ls1021atwr\0" \
"qspi_bootcmd=echo Trying load from qspi..;" \
"sf probe && sf read $load_addr " \
"$kernel_addr $kernel_size && bootm $load_addr#$board\0" \
"nor_bootcmd=echo Trying load from nor..;" \
"cp.b $kernel_addr $load_addr " \
- "$kernel_size && bootm $load_addr#$board\0"
+ "$kernel_size && bootm $load_addr#$board\0" \
+ "sd_bootcmd=echo Trying load from SD ..;" \
+ "mmcinfo && mmc read $load_addr " \
+ "$kernel_addr_sd $kernel_size_sd && " \
+ "bootm $load_addr#$board\0"
#endif
#undef CONFIG_BOOTCOMMAND
#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \
"&& esbc_halt; run qspi_bootcmd;"
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \
+ "&& esbc_halt; run sd_bootcmd;"
#else
#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \
"&& esbc_halt; run nor_bootcmd;"
"fdt_addr_r=0x90000000\0" \
"load_addr=0xa0000000\0" \
"kernel_size=0x2800000\0" \
+ "kernel_addr_sd=0x8000\0" \
+ "kernel_size_sd=0x14000\0" \
"console=ttyS0,115200\0" \
"boot_os=y\0" \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"${scripthdraddr} ${prefix}${boot_script_hdr} " \
"&& esbc_validate ${scripthdraddr};" \
"source ${scriptaddr}\0" \
- "installer=load mmc 0:2 $load_addr " \
- "/flex_installer_arm64.itb; " \
- "bootm $load_addr#ls1043ardb\0" \
"qspi_bootcmd=echo Trying load from qspi..;" \
"sf probe && sf read $load_addr " \
"$kernel_addr $kernel_size && bootm $load_addr#$board\0" \
"nor_bootcmd=echo Trying load from nor..;" \
"cp.b $kernel_addr $load_addr " \
- "$kernel_size && bootm $load_addr#$board\0"
+ "$kernel_size && bootm $load_addr#$board\0" \
+ "sd_bootcmd=echo Trying load from SD ..;" \
+ "mmcinfo; mmc read $load_addr " \
+ "$kernel_addr_sd $kernel_size_sd && " \
+ "bootm $load_addr#$board\0"
+
#undef CONFIG_BOOTCOMMAND
#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \
"&& esbc_halt; run qspi_bootcmd;"
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \
+ "&& esbc_halt; run sd_bootcmd;"
#else
#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \
"&& esbc_halt; run nor_bootcmd;"
"kernel_start=0x1000000\0" \
"kernel_load=0xa0000000\0" \
"kernel_size=0x2800000\0" \
+ "kernel_addr_sd=0x8000\0" \
+ "kernel_size_sd=0x14000\0" \
"console=ttyS0,115200\0" \
CONFIG_MTDPARTS_DEFAULT "\0" \
BOOTENV \
"${scripthdraddr} ${prefix}${boot_script_hdr} " \
"&& esbc_validate ${scripthdraddr};" \
"source ${scriptaddr}\0" \
- "installer=load mmc 0:2 $load_addr " \
- "/flex_installer_arm64.itb; " \
- "bootm $load_addr#ls1046ardb\0" \
"qspi_bootcmd=echo Trying load from qspi..;" \
"sf probe && sf read $load_addr " \
- "$kernel_start $kernel_size && bootm $load_addr#$board\0"
+ "$kernel_start $kernel_size && bootm $load_addr#$board\0" \
+ "sd_bootcmd=echo Trying load from SD ..;" \
+ "mmcinfo; mmc read $load_addr " \
+ "$kernel_addr_sd $kernel_size_sd && " \
+ "bootm $load_addr#$board\0"
#endif
#ifndef SPL_NO_MISC
#undef CONFIG_BOOTCOMMAND
+#if defined(CONFIG_QSPI_BOOT)
#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \
"&& esbc_halt; run qspi_bootcmd;"
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \
+ "&& esbc_halt; run sd_bootcmd;"
+#endif
#endif
#include <asm/fsl_secure_boot.h>
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
/* Link Definitions */
+#ifdef CONFIG_SPL
+#define CONFIG_SYS_TEXT_BASE 0x80400000
+#else
#ifdef CONFIG_QSPI_BOOT
#define CONFIG_SYS_TEXT_BASE 0x20100000
#else
#define CONFIG_SYS_TEXT_BASE 0x30100000
#endif
+#endif
#define CONFIG_SUPPORT_RAW_INITRD
#define CONFIG_SKIP_LOWLEVEL_INIT
+#if !defined(CONFIG_SD_BOOT)
#define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */
+#endif
#define CONFIG_VERY_BIG_RAM
#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
/* Miscellaneous configurable options */
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
+/* SATA */
+#ifdef CONFIG_SCSI
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
+#define CONFIG_SYS_SCSI_MAX_LUN 1
+#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+ CONFIG_SYS_SCSI_MAX_LUN)
+#endif
+
/* Physical Memory Map */
#define CONFIG_CHIP_SELECTS_PER_CTRL 4
" fsl_mc apply dpl 0x80200000 &&" \
" sf read $kernel_load $kernel_start" \
" $kernel_size && bootm $kernel_load"
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_BOOTCOMMAND "mmcinfo;mmc read 0x80200000 0x6800 0x800;"\
+ " fsl_mc apply dpl 0x80200000 &&" \
+ " mmc read $kernel_load $kernel_start" \
+ " $kernel_size && bootm $kernel_load"
#else /* NOR BOOT*/
#define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580d00000 &&" \
" cp.b $kernel_start $kernel_load" \
#define CONFIG_PANIC_HANG /* do not reset board on panic */
+#ifdef CONFIG_SPL
+#define CONFIG_SPL_BSS_START_ADDR 0x80100000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
+#define CONFIG_SPL_MAX_SIZE 0x16000
+#define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
+#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
+#define CONFIG_SPL_TEXT_BASE 0x1800a000
+
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000
+#define CONFIG_SYS_SPL_MALLOC_START 0x80200000
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
+#endif
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
#endif /* __LS1088_COMMON_H */
#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */
#define CONFIG_ENV_SECT_SIZE 0x40000
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_ENV_OFFSET (3 * 1024 * 1024)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_ENV_SIZE 0x2000
#else
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000)
#define CONFIG_ENV_SIZE 0x20000
#endif
-#if defined(CONFIG_QSPI_BOOT)
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_QIXIS_I2C_ACCESS
#define SYS_NO_FLASH
+#undef CONFIG_CMD_IMLS
#define CONFIG_SYS_CLK_FREQ 100000000
#define CONFIG_DDR_CLK_FREQ 100000000
#else
| CSPR_V)
#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64*1024)
-#if defined(CONFIG_QSPI_BOOT)
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_SYS_FPGA_CSOR CSOR_GPCM_ADM_SHIFT(0)
#else
#define CONFIG_SYS_FPGA_CSOR CSOR_GPCM_ADM_SHIFT(12)
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
/* QSPI device */
-#if defined(CONFIG_QSPI_BOOT)
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_FSL_QSPI
-#define CONFIG_SPI_FLASH_SPANSION
#define FSL_QSPI_FLASH_SIZE (1 << 26)
#define FSL_QSPI_FLASH_NUM 2
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END 0x9fffffff
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
+#else
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#endif
#define CONFIG_FSL_MEMAC
"sf read 0x80100000 0xE00000 0x100000;" \
"fsl_mc start mc 0x80000000 0x80100000\0" \
"mcmemsize=0x70000000 \0"
+#elif defined(CONFIG_SD_BOOT)
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "hwconfig=fsl_ddr:bank_intlv=auto\0" \
+ "loadaddr=0x90100000\0" \
+ "kernel_addr=0x800\0" \
+ "ramdisk_addr=0x800000\0" \
+ "ramdisk_size=0x2000000\0" \
+ "fdt_high=0xa0000000\0" \
+ "initrd_high=0xffffffffffffffff\0" \
+ "kernel_start=0x8000\0" \
+ "kernel_load=0xa0000000\0" \
+ "kernel_size=0x14000\0" \
+ "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \
+ "mmc read 0x80100000 0x7000 0x800;" \
+ "fsl_mc start mc 0x80000000 0x80100000\0" \
+ "mcmemsize=0x70000000 \0"
#else /* NOR BOOT */
#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */
#define CONFIG_ENV_SECT_SIZE 0x40000
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_ENV_OFFSET (3 * 1024 * 1024)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_ENV_SIZE 0x2000
#else
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000)
#define CONFIG_ENV_SIZE 0x20000
#endif
-#if defined(CONFIG_QSPI_BOOT)
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_QIXIS_I2C_ACCESS
#define SYS_NO_FLASH
+#undef CONFIG_CMD_IMLS
#endif
#define CONFIG_SYS_CLK_FREQ 100000000
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
/* QSPI device */
-#if defined(CONFIG_QSPI_BOOT)
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_FSL_QSPI
-#define CONFIG_SPI_FLASH_SPANSION
#define FSL_QSPI_FLASH_SIZE (1 << 26)
#define FSL_QSPI_FLASH_NUM 2
#endif
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END 0x9fffffff
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
+#else
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#endif
#define CONFIG_FSL_MEMAC
/* Initial environment variables */
#if defined(CONFIG_QSPI_BOOT)
+#define MC_INIT_CMD \
+ "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \
+ "sf read 0x80100000 0xE00000 0x100000;" \
+ "fsl_mc start mc 0x80000000 0x80100000\0" \
+ "mcmemsize=0x70000000\0"
+#elif defined(CONFIG_SD_BOOT)
+#define MC_INIT_CMD \
+ "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \
+ "mmc read 0x80100000 0x7000 0x800;" \
+ "fsl_mc start mc 0x80000000 0x80100000\0" \
+ "mcmemsize=0x70000000\0"
+#endif
+
#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
+ "BOARD=ls1088ardb\0" \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
- "loadaddr=0x90100000\0" \
- "kernel_addr=0x100000\0" \
"ramdisk_addr=0x800000\0" \
"ramdisk_size=0x2000000\0" \
"fdt_high=0xa0000000\0" \
"initrd_high=0xffffffffffffffff\0" \
- "kernel_start=0x1000000\0" \
- "kernel_load=0xa0000000\0" \
+ "fdt_addr=0x64f00000\0" \
+ "kernel_addr=0x1000000\0" \
+ "kernel_addr_sd=0x8000\0" \
+ "kernel_start=0x580100000\0" \
+ "kernelheader_start=0x580800000\0" \
+ "scriptaddr=0x80000000\0" \
+ "scripthdraddr=0x80080000\0" \
+ "fdtheader_addr_r=0x80100000\0" \
+ "kernelheader_addr=0x800000\0" \
+ "kernelheader_addr_r=0x80200000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "kernelheader_size=0x40000\0" \
+ "fdt_addr_r=0x90000000\0" \
+ "load_addr=0xa0000000\0" \
"kernel_size=0x2800000\0" \
- "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \
- "sf read 0x80100000 0xE00000 0x100000;" \
- "fsl_mc start mc 0x80000000 0x80100000\0" \
- "mcmemsize=0x70000000 \0"
-
+ "kernel_size_sd=0x14000\0" \
+ MC_INIT_CMD \
+ BOOTENV \
+ "boot_scripts=ls1088ardb_boot.scr\0" \
+ "boot_script_hdr=hdr_ls1088ardb_bs.out\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "scan_dev_for_boot=" \
+ "echo Scanning ${devtype} " \
+ "${devnum}:${distro_bootpart}...; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "run scan_dev_for_scripts; " \
+ "done;\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0" \
+ "installer=load mmc 0:2 $load_addr " \
+ "/flex_installer_arm64.itb; " \
+ "env exists mcinitcmd && run mcinitcmd && " \
+ "mmc read 0x80200000 0x6800 0x800;" \
+ "fsl_mc apply dpl 0x80200000;" \
+ "bootm $load_addr#ls1088ardb\0" \
+ "qspi_bootcmd=echo Trying load from qspi..;" \
+ "sf probe && sf read $load_addr " \
+ "$kernel_addr $kernel_size &&" \
+ "bootm $load_addr#$BOARD\0" \
+ "sd_bootcmd=echo Trying load from sd card..;" \
+ "mmcinfo; mmc read $load_addr " \
+ "$kernel_addr_sd $kernel_size_sd ;" \
+ "bootm $load_addr#$BOARD\0"
+
+#undef CONFIG_BOOTCOMMAND
+#if defined(CONFIG_QSPI_BOOT)
+/* Try to boot an on-QSPI kernel first, then do normal distro boot */
+#define CONFIG_BOOTCOMMAND \
+ "env exists mcinitcmd && run mcinitcmd && " \
+ "sf read 0x80200000 0xd00000 0x100000;" \
+ " fsl_mc apply dpl 0x80200000;" \
+ "run distro_bootcmd;run qspi_bootcmd"
+/* Try to boot an on-SD kernel first, then do normal distro boot */
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_BOOTCOMMAND \
+ "env exists mcinitcmd && run mcinitcmd ;" \
+ "&& env exists mcinitcmd && mmcinfo; " \
+ "mmc read 0x88000000 0x6800 0x800; " \
+ "&& fsl_mc apply dpl 0x88000000;" \
+ "run distro_bootcmd;run sd_bootcmd"
#endif
/* MAC/PHY configuration */
#include <config_distro_defaults.h>
#define BOOT_TARGET_DEVICES(func) \
- func(USB, usb, 0) \
func(MMC, mmc, 0) \
func(SCSI, scsi, 0) \
func(DHCP, dhcp, na)
"esbc_validate 0x20700000 && " \
"esbc_validate 0x20740000;" \
"fsl_mc start mc 0x20a00000 0x20e00000 \0"
+#elif defined(CONFIG_SD_BOOT)
+#define MC_INIT_CMD \
+ "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \
+ "mmc read 0x80100000 0x7000 0x800;" \
+ "env exists secureboot && " \
+ "mmc read 0x80700000 0x3800 0x10 && " \
+ "mmc read 0x80740000 0x3A00 0x10 && " \
+ "esbc_validate 0x80700000 && " \
+ "esbc_validate 0x80740000 ;" \
+ "fsl_mc start mc 0x80000000 0x80100000\0" \
+ "mcmemsize=0x70000000\0"
#else
#define MC_INIT_CMD \
"mcinitcmd=env exists secureboot && " \
"fdt_addr_r=0x90000000\0" \
"load_addr=0xa0000000\0" \
"kernel_size=0x2800000\0" \
+ "kernel_addr_sd=0x8000\0" \
+ "kernel_size_sd=0x14000\0" \
"console=ttyAMA0,38400n8\0" \
"mcmemsize=0x70000000\0" \
+ "sd_bootcmd=echo Trying load from SD ..;" \
+ "mmcinfo; mmc read $load_addr " \
+ "$kernel_addr_sd $kernel_size_sd && " \
+ "bootm $load_addr#$board\0" \
MC_INIT_CMD \
BOOTENV \
"boot_scripts=ls2088ardb_boot.scr\0" \
"${scripthdraddr} ${prefix}${boot_script_hdr} " \
"&& esbc_validate ${scripthdraddr};" \
"source ${scriptaddr}\0" \
- "installer=load mmc 0:2 $load_addr " \
- "/flex_installer_arm64.itb; " \
- "bootm $load_addr#ls2088ardb\0" \
"qspi_bootcmd=echo Trying load from qspi..;" \
"sf probe && sf read $load_addr " \
"$kernel_start $kernel_size ; env exists secureboot &&" \
"&& esbc_validate 0x20780000; " \
"env exists mcinitcmd && " \
"fsl_mc lazyapply dpl 0x20d00000; " \
- "run distro_bootcmd;run qspi_bootcmd; " \
- "env exists secureboot && esbc_halt; "
+ "run distro_bootcmd;env exists secureboot " \
+ " && esbc_halt;run qspi_bootcmd; "
+#elif defined(CONFIG_SD_BOOT)
+/* Try to boot an on-SD kernel first, then do normal distro boot */
+#define CONFIG_BOOTCOMMAND \
+ "env exists mcinitcmd && env exists secureboot "\
+ "&& mmcinfo && mmc read $load_addr 0x3c00 0x800 " \
+ "&& esbc_validate $load_addr; " \
+ "env exists mcinitcmd && run mcinitcmd " \
+ "&& mmc read 0x88000000 0x6800 0x800 " \
+ "&& fsl_mc lazyapply dpl 0x88000000; " \
+ "run distro_bootcmd;env exists secureboot " \
+ "&& esbc_halt;run sd_bootcmd;"
#else
/* Try to boot an on-NOR kernel first, then do normal distro boot */
#define CONFIG_BOOTCOMMAND \
"env exists mcinitcmd && env exists secureboot "\
"&& esbc_validate 0x580780000; env exists mcinitcmd "\
"&& fsl_mc lazyapply dpl 0x580d00000;" \
- "run distro_bootcmd;run nor_bootcmd; " \
- "env exists secureboot && esbc_halt; "
+ "run distro_bootcmd; env exists secureboot " \
+ "&& esbc_halt; run nor_bootcmd;"
#endif
/* MAC/PHY configuration */
* Default environment variables
*/
#define CONFIG_LOADADDR 0x00800000
-#define CONFIG_BOOTCOMMAND "run bootcmd_${bootsource}"
#if defined(CONFIG_LSXHL)
#define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
"echo WARNING: Could not determine dtb to use; fi; \0" \
BOOTENV
-#define CONFIG_BOOTCOMMAND \
- "run findfdt; " \
- "run finduuid; " \
- "run distro_bootcmd"
-
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(SATA, sata, 0) \
/* Booting Linux */
#define CONFIG_BOOTFILE "fitImage"
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd ; run net_nfs"
#define CONFIG_HOSTNAME novena
/* Physical Memory Map */
/* Console configuration */
#define CONFIG_BOOTCOMMAND "run autoboot"
-#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
+#define CONFIG_DEFAULT_CONSOLE "ttySAC1,115200n8"
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
- GENERATED_GBL_DATA_SIZE)
"elif test -e mmc 0 uImage; then; " \
"run boot_uimg;" \
"fi;\0" \
- "console=" CONFIG_DEFAULT_CONSOLE \
+ "console=" CONFIG_DEFAULT_CONSOLE "\0" \
"mmcbootdev=0\0" \
"mmcbootpart=1\0" \
"mmcrootdev=0\0" \
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
-#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
+#define CONFIG_DEFAULT_CONSOLE "ttySAC2,115200n8"
/* USB */
#define CONFIG_USB_EHCI_EXYNOS
BOOTENV \
"bootdelay=0\0" \
"rootfstype=ext4\0" \
- "console=" CONFIG_DEFAULT_CONSOLE \
+ "console=" CONFIG_DEFAULT_CONSOLE "\0"\
"fdtfile=exynos5422-odroidxu3.dtb\0" \
"boardname=odroidxu3\0" \
"mmcbootdev=0\0" \
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0)
-#define CONFIG_BOOTCOMMAND \
- "run findfdt; " \
- "run distro_bootcmd"
-
#include <config_distro_bootcmd.h>
#define ENV_FINDFDT \
--- /dev/null
+/*
+ * Configuration for Amlogic P212
+ *
+ * Copyright (C) 2017 Baylibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_PHY_ADDR 8
+
+/* Serial setup */
+#define CONFIG_CONS_INDEX 0
+
+#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxl-s905x-p212.dtb\0"
+
+#include <configs/meson-gxbb-common.h>
+
+#endif /* __CONFIG_H */
#define CONFIG_BOOTCOMMAND "run mmcboot"
-#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
+#define CONFIG_DEFAULT_CONSOLE "ttySAC2,115200n8"
#define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext4" \
" ${console} ${meminfo}"
"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
"verify=n\0" \
"rootfstype=ext4\0" \
- "console=" CONFIG_DEFAULT_CONSOLE \
+ "console=" CONFIG_DEFAULT_CONSOLE "\0"\
"meminfo=mem=80M mem=256M@0x40000000 mem=128M@0x50000000\0" \
"loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x30007FC0 uImage\0" \
"mmcdev=0\0" \
/* Console configuration */
#define CONFIG_BOOTCOMMAND "run mmcboot"
-#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
+#define CONFIG_DEFAULT_CONSOLE "ttySAC1,115200n8"
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
- GENERATED_GBL_DATA_SIZE)
"mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
"verify=n\0" \
"rootfstype=ext4\0" \
- "console=" CONFIG_DEFAULT_CONSOLE \
+ "console=" CONFIG_DEFAULT_CONSOLE "\0" \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT \
"mbrparts=" MBRPARTS_DEFAULT \
"meminfo=crashkernel=32M@0x50000000\0" \
func(HOST, host, 1) \
func(HOST, host, 0)
-#define CONFIG_BOOTCOMMAND ""
-
#include <config_distro_bootcmd.h>
#define CONFIG_KEEP_SERVERADDR
func(PXE, pxe, na) \
func(DHCP, dhcp, na)
-#define CONFIG_BOOTCOMMAND \
- "if test ${boot_fit} -eq 1; then " \
- "run update_to_fit;" \
- "fi;" \
- "run findfdt; " \
- "run envboot; " \
- "run distro_bootcmd"
-
#include <config_distro_bootcmd.h>
#include <environment/ti/mmc.h>
#define CONFIG_MACH_TYPE MACH_TYPE_TRATS
#define CONFIG_BOOTCOMMAND "run autoboot"
-#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
+#define CONFIG_DEFAULT_CONSOLE "ttySAC2,115200n8"
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
- GENERATED_GBL_DATA_SIZE)
"mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
"verify=n\0" \
"rootfstype=ext4\0" \
- "console=" CONFIG_DEFAULT_CONSOLE \
+ "console=" CONFIG_DEFAULT_CONSOLE "\0" \
"meminfo=crashkernel=32M@0x50000000\0" \
"nfsroot=/nfsroot/arm\0" \
"bootblock=" CONFIG_BOOTBLOCK "\0" \
/* Console configuration */
#define CONFIG_BOOTCOMMAND "run autoboot"
-#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
+#define CONFIG_DEFAULT_CONSOLE "ttySAC2,115200n8"
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
- GENERATED_GBL_DATA_SIZE)
"boottrace=setenv opts initcall_debug; run bootcmd\0" \
"verify=n\0" \
"rootfstype=ext4\0" \
- "console=" CONFIG_DEFAULT_CONSOLE \
+ "console=" CONFIG_DEFAULT_CONSOLE "\0" \
"kernelname=uImage\0" \
"loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 " \
"${kernelname}\0" \
func(MMC, mmc, 0) \
func(DHCP, dhcp, na)
-#define CONFIG_BOOTCOMMAND \
- "run findfdt; " \
- "run distro_bootcmd"
-
#include <config_distro_bootcmd.h>
/* Miscellaneous configurable options */
#include <config_distro_defaults.h>
/* Basic environment settings */
-#define CONFIG_BOOTCOMMAND \
- "run distro_bootcmd; " \
- "run bootflash; "
-
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 1) \
func(MMC, mmc, 0) \
func(PXE, pxe, na) \
func(DHCP, dhcp, na)
-#define CONFIG_BOOTCOMMAND \
- "run findfdt; " \
- "run finduuid; " \
- "run distro_bootcmd"
-
#include <config_distro_bootcmd.h>
/* Physical Memory Map */
--- /dev/null
+/*
+ * GPIO definitions for Amlogic Meson GXL SoCs
+ *
+ * Copyright (C) 2016 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _DT_BINDINGS_MESON_GXL_GPIO_H
+#define _DT_BINDINGS_MESON_GXL_GPIO_H
+
+#define GPIOAO_0 0
+#define GPIOAO_1 1
+#define GPIOAO_2 2
+#define GPIOAO_3 3
+#define GPIOAO_4 4
+#define GPIOAO_5 5
+#define GPIOAO_6 6
+#define GPIOAO_7 7
+#define GPIOAO_8 8
+#define GPIOAO_9 9
+
+#define GPIOZ_0 0
+#define GPIOZ_1 1
+#define GPIOZ_2 2
+#define GPIOZ_3 3
+#define GPIOZ_4 4
+#define GPIOZ_5 5
+#define GPIOZ_6 6
+#define GPIOZ_7 7
+#define GPIOZ_8 8
+#define GPIOZ_9 9
+#define GPIOZ_10 10
+#define GPIOZ_11 11
+#define GPIOZ_12 12
+#define GPIOZ_13 13
+#define GPIOZ_14 14
+#define GPIOZ_15 15
+#define GPIOH_0 16
+#define GPIOH_1 17
+#define GPIOH_2 18
+#define GPIOH_3 19
+#define GPIOH_4 20
+#define GPIOH_5 21
+#define GPIOH_6 22
+#define GPIOH_7 23
+#define GPIOH_8 24
+#define GPIOH_9 25
+#define BOOT_0 26
+#define BOOT_1 27
+#define BOOT_2 28
+#define BOOT_3 29
+#define BOOT_4 30
+#define BOOT_5 31
+#define BOOT_6 32
+#define BOOT_7 33
+#define BOOT_8 34
+#define BOOT_9 35
+#define BOOT_10 36
+#define BOOT_11 37
+#define BOOT_12 38
+#define BOOT_13 39
+#define BOOT_14 40
+#define BOOT_15 41
+#define CARD_0 42
+#define CARD_1 43
+#define CARD_2 44
+#define CARD_3 45
+#define CARD_4 46
+#define CARD_5 47
+#define CARD_6 48
+#define GPIODV_0 49
+#define GPIODV_1 50
+#define GPIODV_2 51
+#define GPIODV_3 52
+#define GPIODV_4 53
+#define GPIODV_5 54
+#define GPIODV_6 55
+#define GPIODV_7 56
+#define GPIODV_8 57
+#define GPIODV_9 58
+#define GPIODV_10 59
+#define GPIODV_11 60
+#define GPIODV_12 61
+#define GPIODV_13 62
+#define GPIODV_14 63
+#define GPIODV_15 64
+#define GPIODV_16 65
+#define GPIODV_17 66
+#define GPIODV_18 67
+#define GPIODV_19 68
+#define GPIODV_20 69
+#define GPIODV_21 70
+#define GPIODV_22 71
+#define GPIODV_23 72
+#define GPIODV_24 73
+#define GPIODV_25 74
+#define GPIODV_26 75
+#define GPIODV_27 76
+#define GPIODV_28 77
+#define GPIODV_29 78
+#define GPIOX_0 79
+#define GPIOX_1 80
+#define GPIOX_2 81
+#define GPIOX_3 82
+#define GPIOX_4 83
+#define GPIOX_5 84
+#define GPIOX_6 85
+#define GPIOX_7 86
+#define GPIOX_8 87
+#define GPIOX_9 88
+#define GPIOX_10 89
+#define GPIOX_11 90
+#define GPIOX_12 91
+#define GPIOX_13 92
+#define GPIOX_14 93
+#define GPIOX_15 94
+#define GPIOX_16 95
+#define GPIOX_17 96
+#define GPIOX_18 97
+#define GPIOCLK_0 98
+#define GPIOCLK_1 99
+#define GPIO_TEST_N 100
+
+#endif
-#include "../lib/libfdt/fdt.h"
+#include "../scripts/dtc/libfdt/fdt.h"
#define fdt64_to_cpu(x) be64_to_cpu(x)
#define cpu_to_fdt64(x) cpu_to_be64(x)
-#ifdef __UBOOT__
-#include <vsprintf.h>
-
-#define strtoul(cp, endp, base) simple_strtoul(cp, endp, base)
-#endif
-
/* adding a ramdisk needs 0x44 bytes in version 2008.10 */
#define FDT_RAMDISK_OVERHEAD 0x80
--- /dev/null
+#ifndef _LIBFDT_ENV_H
+#define _LIBFDT_ENV_H
+
+#include <linux/string.h>
+
+#include <asm/byteorder.h>
+
+typedef __be16 fdt16_t;
+typedef __be32 fdt32_t;
+typedef __be64 fdt64_t;
+
+#define fdt32_to_cpu(x) be32_to_cpu(x)
+#define cpu_to_fdt32(x) cpu_to_be32(x)
+#define fdt64_to_cpu(x) be64_to_cpu(x)
+#define cpu_to_fdt64(x) cpu_to_be64(x)
+
+#endif /* _LIBFDT_ENV_H */
--- /dev/null
+#ifndef _LIBFDT_ENV_H
+#define _LIBFDT_ENV_H
+
+#include <linux/string.h>
+
+#include <asm/byteorder.h>
+
+typedef __be16 fdt16_t;
+typedef __be32 fdt32_t;
+typedef __be64 fdt64_t;
+
+#define fdt32_to_cpu(x) be32_to_cpu(x)
+#define cpu_to_fdt32(x) cpu_to_be32(x)
+#define fdt64_to_cpu(x) be64_to_cpu(x)
+#define cpu_to_fdt64(x) cpu_to_be64(x)
+
+/* U-Boot: for strtoul in fdt_overlay.c */
+#include <vsprintf.h>
+
+#define strtoul(cp, endp, base) simple_strtoul(cp, endp, base)
+
+#endif /* _LIBFDT_ENV_H */
typedef __kernel_uid16_t uid16_t;
typedef __kernel_gid16_t gid16_t;
+typedef unsigned long uintptr_t;
+
#ifdef CONFIG_UID16
/* This is defined by include/asm-{arch}/posix_types.h */
typedef __kernel_old_uid_t old_uid_t;
int phy_marvell_init(void);
int phy_micrel_ksz8xxx_init(void);
int phy_micrel_ksz90x1_init(void);
+int phy_meson_gxl_init(void);
int phy_natsemi_init(void);
int phy_realtek_init(void);
int phy_smsc_init(void);
# SPDX-License-Identifier: GPL-2.0+
#
+# Use upstream code.
obj-y += \
fdt.o \
- fdt_ro.o \
- fdt_rw.o \
fdt_strerror.o \
fdt_sw.o \
- fdt_wip.o \
fdt_empty_tree.o \
- fdt_addresses.o \
- fdt_region.o
+ fdt_addresses.o
obj-$(CONFIG_OF_LIBFDT_OVERLAY) += fdt_overlay.o
+
+# Locally modified for U-Boot.
+# TODO: split out the local modifiction.
+obj-y += \
+ fdt_ro.o \
+ fdt_rw.o \
+ fdt_wip.o \
+
+# U-Boot own file
+obj-y += fdt_region.o
-/*
- * libfdt - Flat Device Tree manipulation
- * Copyright (C) 2006 David Gibson, IBM Corporation.
- * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause
- */
-#include <libfdt_env.h>
-
-#ifndef USE_HOSTCC
-#include <fdt.h>
-#include <libfdt.h>
-#else
-#include "fdt_host.h"
-#endif
-
-#include "libfdt_internal.h"
-
-int fdt_check_header(const void *fdt)
-{
- if (fdt_magic(fdt) == FDT_MAGIC) {
- /* Complete tree */
- if (fdt_version(fdt) < FDT_FIRST_SUPPORTED_VERSION)
- return -FDT_ERR_BADVERSION;
- if (fdt_last_comp_version(fdt) > FDT_LAST_SUPPORTED_VERSION)
- return -FDT_ERR_BADVERSION;
- } else if (fdt_magic(fdt) == FDT_SW_MAGIC) {
- /* Unfinished sequential-write blob */
- if (fdt_size_dt_struct(fdt) == 0)
- return -FDT_ERR_BADSTATE;
- } else {
- return -FDT_ERR_BADMAGIC;
- }
-
- return 0;
-}
-
-const void *fdt_offset_ptr(const void *fdt, int offset, unsigned int len)
-{
- unsigned absoffset = offset + fdt_off_dt_struct(fdt);
-
- if ((absoffset < offset)
- || ((absoffset + len) < absoffset)
- || (absoffset + len) > fdt_totalsize(fdt))
- return NULL;
-
- if (fdt_version(fdt) >= 0x11)
- if (((offset + len) < offset)
- || ((offset + len) > fdt_size_dt_struct(fdt)))
- return NULL;
-
- return _fdt_offset_ptr(fdt, offset);
-}
-
-uint32_t fdt_next_tag(const void *fdt, int startoffset, int *nextoffset)
-{
- const fdt32_t *tagp, *lenp;
- uint32_t tag;
- int offset = startoffset;
- const char *p;
-
- *nextoffset = -FDT_ERR_TRUNCATED;
- tagp = fdt_offset_ptr(fdt, offset, FDT_TAGSIZE);
- if (!tagp)
- return FDT_END; /* premature end */
- tag = fdt32_to_cpu(*tagp);
- offset += FDT_TAGSIZE;
-
- *nextoffset = -FDT_ERR_BADSTRUCTURE;
- switch (tag) {
- case FDT_BEGIN_NODE:
- /* skip name */
- do {
- p = fdt_offset_ptr(fdt, offset++, 1);
- } while (p && (*p != '\0'));
- if (!p)
- return FDT_END; /* premature end */
- break;
-
- case FDT_PROP:
- lenp = fdt_offset_ptr(fdt, offset, sizeof(*lenp));
- if (!lenp)
- return FDT_END; /* premature end */
- /* skip-name offset, length and value */
- offset += sizeof(struct fdt_property) - FDT_TAGSIZE
- + fdt32_to_cpu(*lenp);
- break;
-
- case FDT_END:
- case FDT_END_NODE:
- case FDT_NOP:
- break;
-
- default:
- return FDT_END;
- }
-
- if (!fdt_offset_ptr(fdt, startoffset, offset - startoffset))
- return FDT_END; /* premature end */
-
- *nextoffset = FDT_TAGALIGN(offset);
- return tag;
-}
-
-int _fdt_check_node_offset(const void *fdt, int offset)
-{
- if ((offset < 0) || (offset % FDT_TAGSIZE)
- || (fdt_next_tag(fdt, offset, &offset) != FDT_BEGIN_NODE))
- return -FDT_ERR_BADOFFSET;
-
- return offset;
-}
-
-int _fdt_check_prop_offset(const void *fdt, int offset)
-{
- if ((offset < 0) || (offset % FDT_TAGSIZE)
- || (fdt_next_tag(fdt, offset, &offset) != FDT_PROP))
- return -FDT_ERR_BADOFFSET;
-
- return offset;
-}
-
-int fdt_next_node(const void *fdt, int offset, int *depth)
-{
- int nextoffset = 0;
- uint32_t tag;
-
- if (offset >= 0)
- if ((nextoffset = _fdt_check_node_offset(fdt, offset)) < 0)
- return nextoffset;
-
- do {
- offset = nextoffset;
- tag = fdt_next_tag(fdt, offset, &nextoffset);
-
- switch (tag) {
- case FDT_PROP:
- case FDT_NOP:
- break;
-
- case FDT_BEGIN_NODE:
- if (depth)
- (*depth)++;
- break;
-
- case FDT_END_NODE:
- if (depth && ((--(*depth)) < 0))
- return nextoffset;
- break;
-
- case FDT_END:
- if ((nextoffset >= 0)
- || ((nextoffset == -FDT_ERR_TRUNCATED) && !depth))
- return -FDT_ERR_NOTFOUND;
- else
- return nextoffset;
- }
- } while (tag != FDT_BEGIN_NODE);
-
- return offset;
-}
-
-int fdt_first_subnode(const void *fdt, int offset)
-{
- int depth = 0;
-
- offset = fdt_next_node(fdt, offset, &depth);
- if (offset < 0 || depth != 1)
- return -FDT_ERR_NOTFOUND;
-
- return offset;
-}
-
-int fdt_next_subnode(const void *fdt, int offset)
-{
- int depth = 1;
-
- /*
- * With respect to the parent, the depth of the next subnode will be
- * the same as the last.
- */
- do {
- offset = fdt_next_node(fdt, offset, &depth);
- if (offset < 0 || depth < 1)
- return -FDT_ERR_NOTFOUND;
- } while (depth > 1);
-
- return offset;
-}
-
-const char *_fdt_find_string(const char *strtab, int tabsize, const char *s)
-{
- int len = strlen(s) + 1;
- const char *last = strtab + tabsize - len;
- const char *p;
-
- for (p = strtab; p <= last; p++)
- if (memcmp(p, s, len) == 0)
- return p;
- return NULL;
-}
-
-int fdt_move(const void *fdt, void *buf, int bufsize)
-{
- FDT_CHECK_HEADER(fdt);
-
- if (fdt_totalsize(fdt) > bufsize)
- return -FDT_ERR_NOSPACE;
-
- memmove(buf, fdt, fdt_totalsize(fdt));
- return 0;
-}
+#include <linux/libfdt_env.h>
+#include "../../scripts/dtc/libfdt/fdt.c"
+++ /dev/null
-#ifndef _FDT_H
-#define _FDT_H
-/*
- * libfdt - Flat Device Tree manipulation
- * Copyright (C) 2006 David Gibson, IBM Corporation.
- * Copyright 2012 Kim Phillips, Freescale Semiconductor.
- *
- * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause
- */
-
-#ifndef __ASSEMBLY__
-
-struct fdt_header {
- fdt32_t magic; /* magic word FDT_MAGIC */
- fdt32_t totalsize; /* total size of DT block */
- fdt32_t off_dt_struct; /* offset to structure */
- fdt32_t off_dt_strings; /* offset to strings */
- fdt32_t off_mem_rsvmap; /* offset to memory reserve map */
- fdt32_t version; /* format version */
- fdt32_t last_comp_version; /* last compatible version */
-
- /* version 2 fields below */
- fdt32_t boot_cpuid_phys; /* Which physical CPU id we're
- booting on */
- /* version 3 fields below */
- fdt32_t size_dt_strings; /* size of the strings block */
-
- /* version 17 fields below */
- fdt32_t size_dt_struct; /* size of the structure block */
-};
-
-struct fdt_reserve_entry {
- fdt64_t address;
- fdt64_t size;
-};
-
-struct fdt_node_header {
- fdt32_t tag;
- char name[0];
-};
-
-struct fdt_property {
- fdt32_t tag;
- fdt32_t len;
- fdt32_t nameoff;
- char data[0];
-};
-
-#endif /* !__ASSEMBLY */
-
-#define FDT_MAGIC 0xd00dfeed /* 4: version, 4: total size */
-#define FDT_TAGSIZE sizeof(fdt32_t)
-
-#define FDT_BEGIN_NODE 0x1 /* Start node: full name */
-#define FDT_END_NODE 0x2 /* End node */
-#define FDT_PROP 0x3 /* Property: name off,
- size, content */
-#define FDT_NOP 0x4 /* nop */
-#define FDT_END 0x9
-
-#define FDT_V1_SIZE (7*sizeof(fdt32_t))
-#define FDT_V2_SIZE (FDT_V1_SIZE + sizeof(fdt32_t))
-#define FDT_V3_SIZE (FDT_V2_SIZE + sizeof(fdt32_t))
-#define FDT_V16_SIZE FDT_V3_SIZE
-#define FDT_V17_SIZE (FDT_V16_SIZE + sizeof(fdt32_t))
-
-#endif /* _FDT_H */
-/*
- * libfdt - Flat Device Tree manipulation
- * Copyright (C) 2014 David Gibson <david@gibson.dropbear.id.au>
- * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause
- */
-#include <libfdt_env.h>
-
-#ifndef USE_HOSTCC
-#include <fdt.h>
-#include <libfdt.h>
-#else
-#include "fdt_host.h"
-#endif
-
-#include "libfdt_internal.h"
-
-int fdt_address_cells(const void *fdt, int nodeoffset)
-{
- const fdt32_t *ac;
- int val;
- int len;
-
- ac = fdt_getprop(fdt, nodeoffset, "#address-cells", &len);
- if (!ac)
- return 2;
-
- if (len != sizeof(*ac))
- return -FDT_ERR_BADNCELLS;
-
- val = fdt32_to_cpu(*ac);
- if ((val <= 0) || (val > FDT_MAX_NCELLS))
- return -FDT_ERR_BADNCELLS;
-
- return val;
-}
-
-int fdt_size_cells(const void *fdt, int nodeoffset)
-{
- const fdt32_t *sc;
- int val;
- int len;
-
- sc = fdt_getprop(fdt, nodeoffset, "#size-cells", &len);
- if (!sc)
- return 2;
-
- if (len != sizeof(*sc))
- return -FDT_ERR_BADNCELLS;
-
- val = fdt32_to_cpu(*sc);
- if ((val < 0) || (val > FDT_MAX_NCELLS))
- return -FDT_ERR_BADNCELLS;
-
- return val;
-}
+#include <linux/libfdt_env.h>
+#include "../../scripts/dtc/libfdt/fdt_addresses.c"
-/*
- * libfdt - Flat Device Tree manipulation
- * Copyright (C) 2012 David Gibson, IBM Corporation.
- * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause
- */
-#include <libfdt_env.h>
-#include <fdt.h>
-#include <libfdt.h>
-
-#include "libfdt_internal.h"
-
-int fdt_create_empty_tree(void *buf, int bufsize)
-{
- int err;
-
- err = fdt_create(buf, bufsize);
- if (err)
- return err;
-
- err = fdt_finish_reservemap(buf);
- if (err)
- return err;
-
- err = fdt_begin_node(buf, "");
- if (err)
- return err;
-
- err = fdt_end_node(buf);
- if (err)
- return err;
-
- err = fdt_finish(buf);
- if (err)
- return err;
-
- return fdt_open_into(buf, buf, bufsize);
-}
+#include <linux/libfdt_env.h>
+#include "../../scripts/dtc/libfdt/fdt_empty_tree.c"
-#include "libfdt_env.h"
-
-#include <fdt.h>
-#include <libfdt.h>
-
-#include "libfdt_internal.h"
-
-/**
- * overlay_get_target_phandle - retrieves the target phandle of a fragment
- * @fdto: pointer to the device tree overlay blob
- * @fragment: node offset of the fragment in the overlay
- *
- * overlay_get_target_phandle() retrieves the target phandle of an
- * overlay fragment when that fragment uses a phandle (target
- * property) instead of a path (target-path property).
- *
- * returns:
- * the phandle pointed by the target property
- * 0, if the phandle was not found
- * -1, if the phandle was malformed
- */
-static uint32_t overlay_get_target_phandle(const void *fdto, int fragment)
-{
- const fdt32_t *val;
- int len;
-
- val = fdt_getprop(fdto, fragment, "target", &len);
- if (!val)
- return 0;
-
- if ((len != sizeof(*val)) || (fdt32_to_cpu(*val) == (uint32_t)-1))
- return (uint32_t)-1;
-
- return fdt32_to_cpu(*val);
-}
-
-/**
- * overlay_get_target - retrieves the offset of a fragment's target
- * @fdt: Base device tree blob
- * @fdto: Device tree overlay blob
- * @fragment: node offset of the fragment in the overlay
- * @pathp: pointer which receives the path of the target (or NULL)
- *
- * overlay_get_target() retrieves the target offset in the base
- * device tree of a fragment, no matter how the actual targetting is
- * done (through a phandle or a path)
- *
- * returns:
- * the targetted node offset in the base device tree
- * Negative error code on error
- */
-static int overlay_get_target(const void *fdt, const void *fdto,
- int fragment, char const **pathp)
-{
- uint32_t phandle;
- const char *path = NULL;
- int path_len = 0, ret;
-
- /* Try first to do a phandle based lookup */
- phandle = overlay_get_target_phandle(fdto, fragment);
- if (phandle == (uint32_t)-1)
- return -FDT_ERR_BADPHANDLE;
-
- /* no phandle, try path */
- if (!phandle) {
- /* And then a path based lookup */
- path = fdt_getprop(fdto, fragment, "target-path", &path_len);
- if (path)
- ret = fdt_path_offset(fdt, path);
- else
- ret = path_len;
- } else
- ret = fdt_node_offset_by_phandle(fdt, phandle);
-
- /*
- * If we haven't found either a target or a
- * target-path property in a node that contains a
- * __overlay__ subnode (we wouldn't be called
- * otherwise), consider it a improperly written
- * overlay
- */
- if (ret < 0 && path_len == -FDT_ERR_NOTFOUND)
- ret = -FDT_ERR_BADOVERLAY;
-
- /* return on error */
- if (ret < 0)
- return ret;
-
- /* return pointer to path (if available) */
- if (pathp)
- *pathp = path ? path : NULL;
-
- return ret;
-}
-
-/**
- * overlay_phandle_add_offset - Increases a phandle by an offset
- * @fdt: Base device tree blob
- * @node: Device tree overlay blob
- * @name: Name of the property to modify (phandle or linux,phandle)
- * @delta: offset to apply
- *
- * overlay_phandle_add_offset() increments a node phandle by a given
- * offset.
- *
- * returns:
- * 0 on success.
- * Negative error code on error
- */
-static int overlay_phandle_add_offset(void *fdt, int node,
- const char *name, uint32_t delta)
-{
- const fdt32_t *val;
- uint32_t adj_val;
- int len;
-
- val = fdt_getprop(fdt, node, name, &len);
- if (!val)
- return len;
-
- if (len != sizeof(*val))
- return -FDT_ERR_BADPHANDLE;
-
- adj_val = fdt32_to_cpu(*val);
- if ((adj_val + delta) < adj_val)
- return -FDT_ERR_NOPHANDLES;
-
- adj_val += delta;
- if (adj_val == (uint32_t)-1)
- return -FDT_ERR_NOPHANDLES;
-
- return fdt_setprop_inplace_u32(fdt, node, name, adj_val);
-}
-
-/**
- * overlay_adjust_node_phandles - Offsets the phandles of a node
- * @fdto: Device tree overlay blob
- * @node: Offset of the node we want to adjust
- * @delta: Offset to shift the phandles of
- *
- * overlay_adjust_node_phandles() adds a constant to all the phandles
- * of a given node. This is mainly use as part of the overlay
- * application process, when we want to update all the overlay
- * phandles to not conflict with the overlays of the base device tree.
- *
- * returns:
- * 0 on success
- * Negative error code on failure
- */
-static int overlay_adjust_node_phandles(void *fdto, int node,
- uint32_t delta)
-{
- int child;
- int ret;
-
- ret = overlay_phandle_add_offset(fdto, node, "phandle", delta);
- if (ret && ret != -FDT_ERR_NOTFOUND)
- return ret;
-
- ret = overlay_phandle_add_offset(fdto, node, "linux,phandle", delta);
- if (ret && ret != -FDT_ERR_NOTFOUND)
- return ret;
-
- fdt_for_each_subnode(child, fdto, node) {
- ret = overlay_adjust_node_phandles(fdto, child, delta);
- if (ret)
- return ret;
- }
-
- return 0;
-}
-
-/**
- * overlay_adjust_local_phandles - Adjust the phandles of a whole overlay
- * @fdto: Device tree overlay blob
- * @delta: Offset to shift the phandles of
- *
- * overlay_adjust_local_phandles() adds a constant to all the
- * phandles of an overlay. This is mainly use as part of the overlay
- * application process, when we want to update all the overlay
- * phandles to not conflict with the overlays of the base device tree.
- *
- * returns:
- * 0 on success
- * Negative error code on failure
- */
-static int overlay_adjust_local_phandles(void *fdto, uint32_t delta)
-{
- /*
- * Start adjusting the phandles from the overlay root
- */
- return overlay_adjust_node_phandles(fdto, 0, delta);
-}
-
-/**
- * overlay_update_local_node_references - Adjust the overlay references
- * @fdto: Device tree overlay blob
- * @tree_node: Node offset of the node to operate on
- * @fixup_node: Node offset of the matching local fixups node
- * @delta: Offset to shift the phandles of
- *
- * overlay_update_local_nodes_references() update the phandles
- * pointing to a node within the device tree overlay by adding a
- * constant delta.
- *
- * This is mainly used as part of a device tree application process,
- * where you want the device tree overlays phandles to not conflict
- * with the ones from the base device tree before merging them.
- *
- * returns:
- * 0 on success
- * Negative error code on failure
- */
-static int overlay_update_local_node_references(void *fdto,
- int tree_node,
- int fixup_node,
- uint32_t delta)
-{
- int fixup_prop;
- int fixup_child;
- int ret;
-
- fdt_for_each_property_offset(fixup_prop, fdto, fixup_node) {
- const fdt32_t *fixup_val;
- const char *tree_val;
- const char *name;
- int fixup_len;
- int tree_len;
- int i;
-
- fixup_val = fdt_getprop_by_offset(fdto, fixup_prop,
- &name, &fixup_len);
- if (!fixup_val)
- return fixup_len;
-
- if (fixup_len % sizeof(uint32_t))
- return -FDT_ERR_BADOVERLAY;
-
- tree_val = fdt_getprop(fdto, tree_node, name, &tree_len);
- if (!tree_val) {
- if (tree_len == -FDT_ERR_NOTFOUND)
- return -FDT_ERR_BADOVERLAY;
-
- return tree_len;
- }
-
- for (i = 0; i < (fixup_len / sizeof(uint32_t)); i++) {
- fdt32_t adj_val;
- uint32_t poffset;
-
- poffset = fdt32_to_cpu(fixup_val[i]);
-
- /*
- * phandles to fixup can be unaligned.
- *
- * Use a memcpy for the architectures that do
- * not support unaligned accesses.
- */
- memcpy(&adj_val, tree_val + poffset, sizeof(adj_val));
-
- adj_val = cpu_to_fdt32(fdt32_to_cpu(adj_val) + delta);
-
- ret = fdt_setprop_inplace_namelen_partial(fdto,
- tree_node,
- name,
- strlen(name),
- poffset,
- &adj_val,
- sizeof(adj_val));
- if (ret == -FDT_ERR_NOSPACE)
- return -FDT_ERR_BADOVERLAY;
-
- if (ret)
- return ret;
- }
- }
-
- fdt_for_each_subnode(fixup_child, fdto, fixup_node) {
- const char *fixup_child_name = fdt_get_name(fdto, fixup_child,
- NULL);
- int tree_child;
-
- tree_child = fdt_subnode_offset(fdto, tree_node,
- fixup_child_name);
- if (tree_child == -FDT_ERR_NOTFOUND)
- return -FDT_ERR_BADOVERLAY;
- if (tree_child < 0)
- return tree_child;
-
- ret = overlay_update_local_node_references(fdto,
- tree_child,
- fixup_child,
- delta);
- if (ret)
- return ret;
- }
-
- return 0;
-}
-
-/**
- * overlay_update_local_references - Adjust the overlay references
- * @fdto: Device tree overlay blob
- * @delta: Offset to shift the phandles of
- *
- * overlay_update_local_references() update all the phandles pointing
- * to a node within the device tree overlay by adding a constant
- * delta to not conflict with the base overlay.
- *
- * This is mainly used as part of a device tree application process,
- * where you want the device tree overlays phandles to not conflict
- * with the ones from the base device tree before merging them.
- *
- * returns:
- * 0 on success
- * Negative error code on failure
- */
-static int overlay_update_local_references(void *fdto, uint32_t delta)
-{
- int fixups;
-
- fixups = fdt_path_offset(fdto, "/__local_fixups__");
- if (fixups < 0) {
- /* There's no local phandles to adjust, bail out */
- if (fixups == -FDT_ERR_NOTFOUND)
- return 0;
-
- return fixups;
- }
-
- /*
- * Update our local references from the root of the tree
- */
- return overlay_update_local_node_references(fdto, 0, fixups,
- delta);
-}
-
-/**
- * overlay_fixup_one_phandle - Set an overlay phandle to the base one
- * @fdt: Base Device Tree blob
- * @fdto: Device tree overlay blob
- * @symbols_off: Node offset of the symbols node in the base device tree
- * @path: Path to a node holding a phandle in the overlay
- * @path_len: number of path characters to consider
- * @name: Name of the property holding the phandle reference in the overlay
- * @name_len: number of name characters to consider
- * @poffset: Offset within the overlay property where the phandle is stored
- * @label: Label of the node referenced by the phandle
- *
- * overlay_fixup_one_phandle() resolves an overlay phandle pointing to
- * a node in the base device tree.
- *
- * This is part of the device tree overlay application process, when
- * you want all the phandles in the overlay to point to the actual
- * base dt nodes.
- *
- * returns:
- * 0 on success
- * Negative error code on failure
- */
-static int overlay_fixup_one_phandle(void *fdt, void *fdto,
- int symbols_off,
- const char *path, uint32_t path_len,
- const char *name, uint32_t name_len,
- int poffset, const char *label)
-{
- const char *symbol_path;
- uint32_t phandle;
- fdt32_t phandle_prop;
- int symbol_off, fixup_off;
- int prop_len;
-
- if (symbols_off < 0)
- return symbols_off;
-
- symbol_path = fdt_getprop(fdt, symbols_off, label,
- &prop_len);
- if (!symbol_path)
- return prop_len;
-
- symbol_off = fdt_path_offset(fdt, symbol_path);
- if (symbol_off < 0)
- return symbol_off;
-
- phandle = fdt_get_phandle(fdt, symbol_off);
- if (!phandle)
- return -FDT_ERR_NOTFOUND;
-
- fixup_off = fdt_path_offset_namelen(fdto, path, path_len);
- if (fixup_off == -FDT_ERR_NOTFOUND)
- return -FDT_ERR_BADOVERLAY;
- if (fixup_off < 0)
- return fixup_off;
-
- phandle_prop = cpu_to_fdt32(phandle);
- return fdt_setprop_inplace_namelen_partial(fdto, fixup_off,
- name, name_len, poffset,
- &phandle_prop,
- sizeof(phandle_prop));
-};
-
-/**
- * overlay_fixup_phandle - Set an overlay phandle to the base one
- * @fdt: Base Device Tree blob
- * @fdto: Device tree overlay blob
- * @symbols_off: Node offset of the symbols node in the base device tree
- * @property: Property offset in the overlay holding the list of fixups
- *
- * overlay_fixup_phandle() resolves all the overlay phandles pointed
- * to in a __fixups__ property, and updates them to match the phandles
- * in use in the base device tree.
- *
- * This is part of the device tree overlay application process, when
- * you want all the phandles in the overlay to point to the actual
- * base dt nodes.
- *
- * returns:
- * 0 on success
- * Negative error code on failure
- */
-static int overlay_fixup_phandle(void *fdt, void *fdto, int symbols_off,
- int property)
-{
- const char *value;
- const char *label;
- int len;
-
- value = fdt_getprop_by_offset(fdto, property,
- &label, &len);
- if (!value) {
- if (len == -FDT_ERR_NOTFOUND)
- return -FDT_ERR_INTERNAL;
-
- return len;
- }
-
- do {
- const char *path, *name, *fixup_end;
- const char *fixup_str = value;
- uint32_t path_len, name_len;
- uint32_t fixup_len;
- char *sep, *endptr;
- int poffset, ret;
-
- fixup_end = memchr(value, '\0', len);
- if (!fixup_end)
- return -FDT_ERR_BADOVERLAY;
- fixup_len = fixup_end - fixup_str;
-
- len -= fixup_len + 1;
- value += fixup_len + 1;
-
- path = fixup_str;
- sep = memchr(fixup_str, ':', fixup_len);
- if (!sep || *sep != ':')
- return -FDT_ERR_BADOVERLAY;
-
- path_len = sep - path;
- if (path_len == (fixup_len - 1))
- return -FDT_ERR_BADOVERLAY;
-
- fixup_len -= path_len + 1;
- name = sep + 1;
- sep = memchr(name, ':', fixup_len);
- if (!sep || *sep != ':')
- return -FDT_ERR_BADOVERLAY;
-
- name_len = sep - name;
- if (!name_len)
- return -FDT_ERR_BADOVERLAY;
-
- poffset = strtoul(sep + 1, &endptr, 10);
- if ((*endptr != '\0') || (endptr <= (sep + 1)))
- return -FDT_ERR_BADOVERLAY;
-
- ret = overlay_fixup_one_phandle(fdt, fdto, symbols_off,
- path, path_len, name, name_len,
- poffset, label);
- if (ret)
- return ret;
- } while (len > 0);
-
- return 0;
-}
-
-/**
- * overlay_fixup_phandles - Resolve the overlay phandles to the base
- * device tree
- * @fdt: Base Device Tree blob
- * @fdto: Device tree overlay blob
- *
- * overlay_fixup_phandles() resolves all the overlay phandles pointing
- * to nodes in the base device tree.
- *
- * This is one of the steps of the device tree overlay application
- * process, when you want all the phandles in the overlay to point to
- * the actual base dt nodes.
- *
- * returns:
- * 0 on success
- * Negative error code on failure
- */
-static int overlay_fixup_phandles(void *fdt, void *fdto)
-{
- int fixups_off, symbols_off;
- int property;
-
- /* We can have overlays without any fixups */
- fixups_off = fdt_path_offset(fdto, "/__fixups__");
- if (fixups_off == -FDT_ERR_NOTFOUND)
- return 0; /* nothing to do */
- if (fixups_off < 0)
- return fixups_off;
-
- /* And base DTs without symbols */
- symbols_off = fdt_path_offset(fdt, "/__symbols__");
- if ((symbols_off < 0 && (symbols_off != -FDT_ERR_NOTFOUND)))
- return symbols_off;
-
- fdt_for_each_property_offset(property, fdto, fixups_off) {
- int ret;
-
- ret = overlay_fixup_phandle(fdt, fdto, symbols_off, property);
- if (ret)
- return ret;
- }
-
- return 0;
-}
-
-/**
- * overlay_apply_node - Merges a node into the base device tree
- * @fdt: Base Device Tree blob
- * @target: Node offset in the base device tree to apply the fragment to
- * @fdto: Device tree overlay blob
- * @node: Node offset in the overlay holding the changes to merge
- *
- * overlay_apply_node() merges a node into a target base device tree
- * node pointed.
- *
- * This is part of the final step in the device tree overlay
- * application process, when all the phandles have been adjusted and
- * resolved and you just have to merge overlay into the base device
- * tree.
- *
- * returns:
- * 0 on success
- * Negative error code on failure
- */
-static int overlay_apply_node(void *fdt, int target,
- void *fdto, int node)
-{
- int property;
- int subnode;
-
- fdt_for_each_property_offset(property, fdto, node) {
- const char *name;
- const void *prop;
- int prop_len;
- int ret;
-
- prop = fdt_getprop_by_offset(fdto, property, &name,
- &prop_len);
- if (prop_len == -FDT_ERR_NOTFOUND)
- return -FDT_ERR_INTERNAL;
- if (prop_len < 0)
- return prop_len;
-
- ret = fdt_setprop(fdt, target, name, prop, prop_len);
- if (ret)
- return ret;
- }
-
- fdt_for_each_subnode(subnode, fdto, node) {
- const char *name = fdt_get_name(fdto, subnode, NULL);
- int nnode;
- int ret;
-
- nnode = fdt_add_subnode(fdt, target, name);
- if (nnode == -FDT_ERR_EXISTS) {
- nnode = fdt_subnode_offset(fdt, target, name);
- if (nnode == -FDT_ERR_NOTFOUND)
- return -FDT_ERR_INTERNAL;
- }
-
- if (nnode < 0)
- return nnode;
-
- ret = overlay_apply_node(fdt, nnode, fdto, subnode);
- if (ret)
- return ret;
- }
-
- return 0;
-}
-
-/**
- * overlay_merge - Merge an overlay into its base device tree
- * @fdt: Base Device Tree blob
- * @fdto: Device tree overlay blob
- *
- * overlay_merge() merges an overlay into its base device tree.
- *
- * This is the next to last step in the device tree overlay application
- * process, when all the phandles have been adjusted and resolved and
- * you just have to merge overlay into the base device tree.
- *
- * returns:
- * 0 on success
- * Negative error code on failure
- */
-static int overlay_merge(void *fdt, void *fdto)
-{
- int fragment;
-
- fdt_for_each_subnode(fragment, fdto, 0) {
- int overlay;
- int target;
- int ret;
-
- /*
- * Each fragments will have an __overlay__ node. If
- * they don't, it's not supposed to be merged
- */
- overlay = fdt_subnode_offset(fdto, fragment, "__overlay__");
- if (overlay == -FDT_ERR_NOTFOUND)
- continue;
-
- if (overlay < 0)
- return overlay;
-
- target = overlay_get_target(fdt, fdto, fragment, NULL);
- if (target < 0)
- return target;
-
- ret = overlay_apply_node(fdt, target, fdto, overlay);
- if (ret)
- return ret;
- }
-
- return 0;
-}
-
-static int get_path_len(const void *fdt, int nodeoffset)
-{
- int len = 0, namelen;
- const char *name;
-
- FDT_CHECK_HEADER(fdt);
-
- for (;;) {
- name = fdt_get_name(fdt, nodeoffset, &namelen);
- if (!name)
- return namelen;
-
- /* root? we're done */
- if (namelen == 0)
- break;
-
- nodeoffset = fdt_parent_offset(fdt, nodeoffset);
- if (nodeoffset < 0)
- return nodeoffset;
- len += namelen + 1;
- }
-
- /* in case of root pretend it's "/" */
- if (len == 0)
- len++;
- return len;
-}
-
-/**
- * overlay_symbol_update - Update the symbols of base tree after a merge
- * @fdt: Base Device Tree blob
- * @fdto: Device tree overlay blob
- *
- * overlay_symbol_update() updates the symbols of the base tree with the
- * symbols of the applied overlay
- *
- * This is the last step in the device tree overlay application
- * process, allowing the reference of overlay symbols by subsequent
- * overlay operations.
- *
- * returns:
- * 0 on success
- * Negative error code on failure
- */
-static int overlay_symbol_update(void *fdt, void *fdto)
-{
- int root_sym, ov_sym, prop, path_len, fragment, target;
- int len, frag_name_len, ret, rel_path_len;
- const char *s, *e;
- const char *path;
- const char *name;
- const char *frag_name;
- const char *rel_path;
- const char *target_path;
- char *buf;
- void *p;
-
- ov_sym = fdt_subnode_offset(fdto, 0, "__symbols__");
-
- /* if no overlay symbols exist no problem */
- if (ov_sym < 0)
- return 0;
-
- root_sym = fdt_subnode_offset(fdt, 0, "__symbols__");
-
- /* it no root symbols exist we should create them */
- if (root_sym == -FDT_ERR_NOTFOUND)
- root_sym = fdt_add_subnode(fdt, 0, "__symbols__");
-
- /* any error is fatal now */
- if (root_sym < 0)
- return root_sym;
-
- /* iterate over each overlay symbol */
- fdt_for_each_property_offset(prop, fdto, ov_sym) {
- path = fdt_getprop_by_offset(fdto, prop, &name, &path_len);
- if (!path)
- return path_len;
-
- /* verify it's a string property (terminated by a single \0) */
- if (path_len < 1 || memchr(path, '\0', path_len) != &path[path_len - 1])
- return -FDT_ERR_BADVALUE;
-
- /* keep end marker to avoid strlen() */
- e = path + path_len;
-
- /* format: /<fragment-name>/__overlay__/<relative-subnode-path> */
-
- if (*path != '/')
- return -FDT_ERR_BADVALUE;
-
- /* get fragment name first */
- s = strchr(path + 1, '/');
- if (!s)
- return -FDT_ERR_BADOVERLAY;
-
- frag_name = path + 1;
- frag_name_len = s - path - 1;
-
- /* verify format; safe since "s" lies in \0 terminated prop */
- len = sizeof("/__overlay__/") - 1;
- if ((e - s) < len || memcmp(s, "/__overlay__/", len))
- return -FDT_ERR_BADOVERLAY;
-
- rel_path = s + len;
- rel_path_len = e - rel_path;
-
- /* find the fragment index in which the symbol lies */
- ret = fdt_subnode_offset_namelen(fdto, 0, frag_name,
- frag_name_len);
- /* not found? */
- if (ret < 0)
- return -FDT_ERR_BADOVERLAY;
- fragment = ret;
-
- /* an __overlay__ subnode must exist */
- ret = fdt_subnode_offset(fdto, fragment, "__overlay__");
- if (ret < 0)
- return -FDT_ERR_BADOVERLAY;
-
- /* get the target of the fragment */
- ret = overlay_get_target(fdt, fdto, fragment, &target_path);
- if (ret < 0)
- return ret;
- target = ret;
-
- /* if we have a target path use */
- if (!target_path) {
- ret = get_path_len(fdt, target);
- if (ret < 0)
- return ret;
- len = ret;
- } else {
- len = strlen(target_path);
- }
-
- ret = fdt_setprop_placeholder(fdt, root_sym, name,
- len + (len > 1) + rel_path_len + 1, &p);
- if (ret < 0)
- return ret;
-
- if (!target_path) {
- /* again in case setprop_placeholder changed it */
- ret = overlay_get_target(fdt, fdto, fragment, &target_path);
- if (ret < 0)
- return ret;
- target = ret;
- }
-
- buf = p;
- if (len > 1) { /* target is not root */
- if (!target_path) {
- ret = fdt_get_path(fdt, target, buf, len + 1);
- if (ret < 0)
- return ret;
- } else
- memcpy(buf, target_path, len + 1);
-
- } else
- len--;
-
- buf[len] = '/';
- memcpy(buf + len + 1, rel_path, rel_path_len);
- buf[len + 1 + rel_path_len] = '\0';
- }
-
- return 0;
-}
-
-int fdt_overlay_apply(void *fdt, void *fdto)
-{
- uint32_t delta = fdt_get_max_phandle(fdt);
- int ret;
-
- FDT_CHECK_HEADER(fdt);
- FDT_CHECK_HEADER(fdto);
-
- ret = overlay_adjust_local_phandles(fdto, delta);
- if (ret)
- goto err;
-
- ret = overlay_update_local_references(fdto, delta);
- if (ret)
- goto err;
-
- ret = overlay_fixup_phandles(fdt, fdto);
- if (ret)
- goto err;
-
- ret = overlay_merge(fdt, fdto);
- if (ret)
- goto err;
-
- ret = overlay_symbol_update(fdt, fdto);
- if (ret)
- goto err;
-
- /*
- * The overlay has been damaged, erase its magic.
- */
- fdt_set_magic(fdto, ~0);
-
- return 0;
-
-err:
- /*
- * The overlay might have been damaged, erase its magic.
- */
- fdt_set_magic(fdto, ~0);
-
- /*
- * The base device tree might have been damaged, erase its
- * magic.
- */
- fdt_set_magic(fdt, ~0);
-
- return ret;
-}
+#include <linux/libfdt_env.h>
+#include "../../scripts/dtc/libfdt/fdt_overlay.c"
-/*
- * libfdt - Flat Device Tree manipulation
- * Copyright (C) 2006 David Gibson, IBM Corporation.
- * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause
- */
-#include <libfdt_env.h>
-
-#ifndef USE_HOSTCC
-#include <fdt.h>
-#include <libfdt.h>
-#else
-#include "fdt_host.h"
-#endif
-
-#include "libfdt_internal.h"
-
-struct fdt_errtabent {
- const char *str;
-};
-
-#define FDT_ERRTABENT(val) \
- [(val)] = { .str = #val, }
-
-static struct fdt_errtabent fdt_errtable[] = {
- FDT_ERRTABENT(FDT_ERR_NOTFOUND),
- FDT_ERRTABENT(FDT_ERR_EXISTS),
- FDT_ERRTABENT(FDT_ERR_NOSPACE),
-
- FDT_ERRTABENT(FDT_ERR_BADOFFSET),
- FDT_ERRTABENT(FDT_ERR_BADPATH),
- FDT_ERRTABENT(FDT_ERR_BADPHANDLE),
- FDT_ERRTABENT(FDT_ERR_BADSTATE),
-
- FDT_ERRTABENT(FDT_ERR_TRUNCATED),
- FDT_ERRTABENT(FDT_ERR_BADMAGIC),
- FDT_ERRTABENT(FDT_ERR_BADVERSION),
- FDT_ERRTABENT(FDT_ERR_BADSTRUCTURE),
- FDT_ERRTABENT(FDT_ERR_BADLAYOUT),
- FDT_ERRTABENT(FDT_ERR_INTERNAL),
- FDT_ERRTABENT(FDT_ERR_BADNCELLS),
- FDT_ERRTABENT(FDT_ERR_BADVALUE),
- FDT_ERRTABENT(FDT_ERR_BADOVERLAY),
- FDT_ERRTABENT(FDT_ERR_NOPHANDLES),
-};
-#define FDT_ERRTABSIZE (sizeof(fdt_errtable) / sizeof(fdt_errtable[0]))
-
-const char *fdt_strerror(int errval)
-{
- if (errval > 0)
- return "<valid offset/length>";
- else if (errval == 0)
- return "<no error>";
- else if (errval > -FDT_ERRTABSIZE) {
- const char *s = fdt_errtable[-errval].str;
-
- if (s)
- return s;
- }
-
- return "<unknown error>";
-}
+#include <linux/libfdt_env.h>
+#include "../../scripts/dtc/libfdt/fdt_strerror.c"
-/*
- * libfdt - Flat Device Tree manipulation
- * Copyright (C) 2006 David Gibson, IBM Corporation.
- * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause
- */
-#include <libfdt_env.h>
-#include <fdt.h>
-#include <libfdt.h>
-
-#include "libfdt_internal.h"
-
-static int _fdt_sw_check_header(void *fdt)
-{
- if (fdt_magic(fdt) != FDT_SW_MAGIC)
- return -FDT_ERR_BADMAGIC;
- /* FIXME: should check more details about the header state */
- return 0;
-}
-
-#define FDT_SW_CHECK_HEADER(fdt) \
- { \
- int err; \
- if ((err = _fdt_sw_check_header(fdt)) != 0) \
- return err; \
- }
-
-static void *_fdt_grab_space(void *fdt, size_t len)
-{
- int offset = fdt_size_dt_struct(fdt);
- int spaceleft;
-
- spaceleft = fdt_totalsize(fdt) - fdt_off_dt_struct(fdt)
- - fdt_size_dt_strings(fdt);
-
- if ((offset + len < offset) || (offset + len > spaceleft))
- return NULL;
-
- fdt_set_size_dt_struct(fdt, offset + len);
- return _fdt_offset_ptr_w(fdt, offset);
-}
-
-int fdt_create(void *buf, int bufsize)
-{
- void *fdt = buf;
-
- if (bufsize < sizeof(struct fdt_header))
- return -FDT_ERR_NOSPACE;
-
- memset(buf, 0, bufsize);
-
- fdt_set_magic(fdt, FDT_SW_MAGIC);
- fdt_set_version(fdt, FDT_LAST_SUPPORTED_VERSION);
- fdt_set_last_comp_version(fdt, FDT_FIRST_SUPPORTED_VERSION);
- fdt_set_totalsize(fdt, bufsize);
-
- fdt_set_off_mem_rsvmap(fdt, FDT_ALIGN(sizeof(struct fdt_header),
- sizeof(struct fdt_reserve_entry)));
- fdt_set_off_dt_struct(fdt, fdt_off_mem_rsvmap(fdt));
- fdt_set_off_dt_strings(fdt, bufsize);
-
- return 0;
-}
-
-int fdt_resize(void *fdt, void *buf, int bufsize)
-{
- size_t headsize, tailsize;
- char *oldtail, *newtail;
-
- FDT_SW_CHECK_HEADER(fdt);
-
- headsize = fdt_off_dt_struct(fdt);
- tailsize = fdt_size_dt_strings(fdt);
-
- if ((headsize + tailsize) > bufsize)
- return -FDT_ERR_NOSPACE;
-
- oldtail = (char *)fdt + fdt_totalsize(fdt) - tailsize;
- newtail = (char *)buf + bufsize - tailsize;
-
- /* Two cases to avoid clobbering data if the old and new
- * buffers partially overlap */
- if (buf <= fdt) {
- memmove(buf, fdt, headsize);
- memmove(newtail, oldtail, tailsize);
- } else {
- memmove(newtail, oldtail, tailsize);
- memmove(buf, fdt, headsize);
- }
-
- fdt_set_off_dt_strings(buf, bufsize);
- fdt_set_totalsize(buf, bufsize);
-
- return 0;
-}
-
-int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size)
-{
- struct fdt_reserve_entry *re;
- int offset;
-
- FDT_SW_CHECK_HEADER(fdt);
-
- if (fdt_size_dt_struct(fdt))
- return -FDT_ERR_BADSTATE;
-
- offset = fdt_off_dt_struct(fdt);
- if ((offset + sizeof(*re)) > fdt_totalsize(fdt))
- return -FDT_ERR_NOSPACE;
-
- re = (struct fdt_reserve_entry *)((char *)fdt + offset);
- re->address = cpu_to_fdt64(addr);
- re->size = cpu_to_fdt64(size);
-
- fdt_set_off_dt_struct(fdt, offset + sizeof(*re));
-
- return 0;
-}
-
-int fdt_finish_reservemap(void *fdt)
-{
- return fdt_add_reservemap_entry(fdt, 0, 0);
-}
-
-int fdt_begin_node(void *fdt, const char *name)
-{
- struct fdt_node_header *nh;
- int namelen = strlen(name) + 1;
-
- FDT_SW_CHECK_HEADER(fdt);
-
- nh = _fdt_grab_space(fdt, sizeof(*nh) + FDT_TAGALIGN(namelen));
- if (! nh)
- return -FDT_ERR_NOSPACE;
-
- nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE);
- memcpy(nh->name, name, namelen);
- return 0;
-}
-
-int fdt_end_node(void *fdt)
-{
- fdt32_t *en;
-
- FDT_SW_CHECK_HEADER(fdt);
-
- en = _fdt_grab_space(fdt, FDT_TAGSIZE);
- if (! en)
- return -FDT_ERR_NOSPACE;
-
- *en = cpu_to_fdt32(FDT_END_NODE);
- return 0;
-}
-
-static int _fdt_find_add_string(void *fdt, const char *s)
-{
- char *strtab = (char *)fdt + fdt_totalsize(fdt);
- const char *p;
- int strtabsize = fdt_size_dt_strings(fdt);
- int len = strlen(s) + 1;
- int struct_top, offset;
-
- p = _fdt_find_string(strtab - strtabsize, strtabsize, s);
- if (p)
- return p - strtab;
-
- /* Add it */
- offset = -strtabsize - len;
- struct_top = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt);
- if (fdt_totalsize(fdt) + offset < struct_top)
- return 0; /* no more room :( */
-
- memcpy(strtab + offset, s, len);
- fdt_set_size_dt_strings(fdt, strtabsize + len);
- return offset;
-}
-
-int fdt_property_placeholder(void *fdt, const char *name, int len, void **valp)
-{
- struct fdt_property *prop;
- int nameoff;
-
- FDT_SW_CHECK_HEADER(fdt);
-
- nameoff = _fdt_find_add_string(fdt, name);
- if (nameoff == 0)
- return -FDT_ERR_NOSPACE;
-
- prop = _fdt_grab_space(fdt, sizeof(*prop) + FDT_TAGALIGN(len));
- if (! prop)
- return -FDT_ERR_NOSPACE;
-
- prop->tag = cpu_to_fdt32(FDT_PROP);
- prop->nameoff = cpu_to_fdt32(nameoff);
- prop->len = cpu_to_fdt32(len);
- *valp = prop->data;
- return 0;
-}
-
-int fdt_property(void *fdt, const char *name, const void *val, int len)
-{
- void *ptr;
- int ret;
-
- ret = fdt_property_placeholder(fdt, name, len, &ptr);
- if (ret)
- return ret;
- memcpy(ptr, val, len);
- return 0;
-}
-
-int fdt_finish(void *fdt)
-{
- char *p = (char *)fdt;
- fdt32_t *end;
- int oldstroffset, newstroffset;
- uint32_t tag;
- int offset, nextoffset;
-
- FDT_SW_CHECK_HEADER(fdt);
-
- /* Add terminator */
- end = _fdt_grab_space(fdt, sizeof(*end));
- if (! end)
- return -FDT_ERR_NOSPACE;
- *end = cpu_to_fdt32(FDT_END);
-
- /* Relocate the string table */
- oldstroffset = fdt_totalsize(fdt) - fdt_size_dt_strings(fdt);
- newstroffset = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt);
- memmove(p + newstroffset, p + oldstroffset, fdt_size_dt_strings(fdt));
- fdt_set_off_dt_strings(fdt, newstroffset);
-
- /* Walk the structure, correcting string offsets */
- offset = 0;
- while ((tag = fdt_next_tag(fdt, offset, &nextoffset)) != FDT_END) {
- if (tag == FDT_PROP) {
- struct fdt_property *prop =
- _fdt_offset_ptr_w(fdt, offset);
- int nameoff;
-
- nameoff = fdt32_to_cpu(prop->nameoff);
- nameoff += fdt_size_dt_strings(fdt);
- prop->nameoff = cpu_to_fdt32(nameoff);
- }
- offset = nextoffset;
- }
- if (nextoffset < 0)
- return nextoffset;
-
- /* Finally, adjust the header */
- fdt_set_totalsize(fdt, newstroffset + fdt_size_dt_strings(fdt));
- fdt_set_magic(fdt, FDT_MAGIC);
- return 0;
-}
+#include <linux/libfdt_env.h>
+#include "../../scripts/dtc/libfdt/fdt_sw.c"
-#ifndef _LIBFDT_INTERNAL_H
-#define _LIBFDT_INTERNAL_H
-/*
- * libfdt - Flat Device Tree manipulation
- * Copyright (C) 2006 David Gibson, IBM Corporation.
- * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause
- */
-#include <fdt.h>
-
-#define FDT_ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1))
-#define FDT_TAGALIGN(x) (FDT_ALIGN((x), FDT_TAGSIZE))
-
-#define FDT_CHECK_HEADER(fdt) \
- { \
- int __err; \
- if ((__err = fdt_check_header(fdt)) != 0) \
- return __err; \
- }
-
-int _fdt_check_node_offset(const void *fdt, int offset);
-int _fdt_check_prop_offset(const void *fdt, int offset);
-const char *_fdt_find_string(const char *strtab, int tabsize, const char *s);
-int _fdt_node_end_offset(void *fdt, int nodeoffset);
-
-static inline const void *_fdt_offset_ptr(const void *fdt, int offset)
-{
- return (const char *)fdt + fdt_off_dt_struct(fdt) + offset;
-}
-
-static inline void *_fdt_offset_ptr_w(void *fdt, int offset)
-{
- return (void *)(uintptr_t)_fdt_offset_ptr(fdt, offset);
-}
-
-static inline const struct fdt_reserve_entry *_fdt_mem_rsv(const void *fdt, int n)
-{
- const struct fdt_reserve_entry *rsv_table =
- (const struct fdt_reserve_entry *)
- ((const char *)fdt + fdt_off_mem_rsvmap(fdt));
-
- return rsv_table + n;
-}
-static inline struct fdt_reserve_entry *_fdt_mem_rsv_w(void *fdt, int n)
-{
- return (void *)(uintptr_t)_fdt_mem_rsv(fdt, n);
-}
-
-#define FDT_SW_MAGIC (~FDT_MAGIC)
-
-#endif /* _LIBFDT_INTERNAL_H */
+#include "../../scripts/dtc/libfdt/libfdt_internal.h"
+++ /dev/null
-/*
- * pylibfdt - Flat Device Tree manipulation in Python
- * Copyright (C) 2017 Google, Inc.
- * Written by Simon Glass <sjg@chromium.org>
- *
- * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause
- */
-
-%module libfdt
-
-%include <stdint.i>
-
-%{
-#define SWIG_FILE_WITH_INIT
-#include "libfdt.h"
-%}
-
-%pythoncode %{
-
-import struct
-
-# Error codes, corresponding to FDT_ERR_... in libfdt.h
-(NOTFOUND,
- EXISTS,
- NOSPACE,
- BADOFFSET,
- BADPATH,
- BADPHANDLE,
- BADSTATE,
- TRUNCATED,
- BADMAGIC,
- BADVERSION,
- BADSTRUCTURE,
- BADLAYOUT,
- INTERNAL,
- BADNCELLS,
- BADVALUE,
- BADOVERLAY,
- NOPHANDLES) = QUIET_ALL = range(1, 18)
-# QUIET_ALL can be passed as the 'quiet' parameter to avoid exceptions
-# altogether. All # functions passed this value will return an error instead
-# of raising an exception.
-
-# Pass this as the 'quiet' parameter to return -ENOTFOUND on NOTFOUND errors,
-# instead of raising an exception.
-QUIET_NOTFOUND = (NOTFOUND,)
-
-
-class FdtException(Exception):
- """An exception caused by an error such as one of the codes above"""
- def __init__(self, err):
- self.err = err
-
- def __str__(self):
- return 'pylibfdt error %d: %s' % (self.err, fdt_strerror(self.err))
-
-def strerror(fdt_err):
- """Get the string for an error number
-
- Args:
- fdt_err: Error number (-ve)
-
- Returns:
- String containing the associated error
- """
- return fdt_strerror(fdt_err)
-
-def check_err(val, quiet=()):
- """Raise an error if the return value is -ve
-
- This is used to check for errors returned by libfdt C functions.
-
- Args:
- val: Return value from a libfdt function
- quiet: Errors to ignore (empty to raise on all errors)
-
- Returns:
- val if val >= 0
-
- Raises
- FdtException if val < 0
- """
- if val < 0:
- if -val not in quiet:
- raise FdtException(val)
- return val
-
-def check_err_null(val, quiet=()):
- """Raise an error if the return value is NULL
-
- This is used to check for a NULL return value from certain libfdt C
- functions
-
- Args:
- val: Return value from a libfdt function
- quiet: Errors to ignore (empty to raise on all errors)
-
- Returns:
- val if val is a list, None if not
-
- Raises
- FdtException if val indicates an error was reported and the error
- is not in @quiet.
- """
- # Normally a list is returned which contains the data and its length.
- # If we get just an integer error code, it means the function failed.
- if not isinstance(val, list):
- if -val not in quiet:
- raise FdtException(val)
- return val
-
-class Fdt:
- """Device tree class, supporting all operations
-
- The Fdt object is created is created from a device tree binary file,
- e.g. with something like:
-
- fdt = Fdt(open("filename.dtb").read())
-
- Operations can then be performed using the methods in this class. Each
- method xxx(args...) corresponds to a libfdt function fdt_xxx(fdt, args...).
-
- All methods raise an FdtException if an error occurs. To avoid this
- behaviour a 'quiet' parameter is provided for some functions. This
- defaults to empty, but you can pass a list of errors that you expect.
- If one of these errors occurs, the function will return an error number
- (e.g. -NOTFOUND).
- """
- def __init__(self, data):
- self._fdt = bytearray(data)
- check_err(fdt_check_header(self._fdt));
-
- def subnode_offset(self, parentoffset, name, quiet=()):
- """Get the offset of a named subnode
-
- Args:
- parentoffset: Offset of the parent node to check
- name: Name of the required subnode, e.g. 'subnode@1'
- quiet: Errors to ignore (empty to raise on all errors)
-
- Returns:
- The node offset of the found node, if any
-
- Raises
- FdtException if there is no node with that name, or other error
- """
- return check_err(fdt_subnode_offset(self._fdt, parentoffset, name),
- quiet)
-
- def path_offset(self, path, quiet=()):
- """Get the offset for a given path
-
- Args:
- path: Path to the required node, e.g. '/node@3/subnode@1'
- quiet: Errors to ignore (empty to raise on all errors)
-
- Returns:
- Node offset
-
- Raises
- FdtException if the path is not valid or not found
- """
- return check_err(fdt_path_offset(self._fdt, path), quiet)
-
- def first_property_offset(self, nodeoffset, quiet=()):
- """Get the offset of the first property in a node offset
-
- Args:
- nodeoffset: Offset to the node to check
- quiet: Errors to ignore (empty to raise on all errors)
-
- Returns:
- Offset of the first property
-
- Raises
- FdtException if the associated node has no properties, or some
- other error occurred
- """
- return check_err(fdt_first_property_offset(self._fdt, nodeoffset),
- quiet)
-
- def next_property_offset(self, prop_offset, quiet=()):
- """Get the next property in a node
-
- Args:
- prop_offset: Offset of the previous property
- quiet: Errors to ignore (empty to raise on all errors)
-
- Returns:
- Offset of the next property
-
- Raises:
- FdtException if the associated node has no more properties, or
- some other error occurred
- """
- return check_err(fdt_next_property_offset(self._fdt, prop_offset),
- quiet)
-
- def get_name(self, nodeoffset):
- """Get the name of a node
-
- Args:
- nodeoffset: Offset of node to check
-
- Returns:
- Node name
-
- Raises:
- FdtException on error (e.g. nodeoffset is invalid)
- """
- return check_err_null(fdt_get_name(self._fdt, nodeoffset))[0]
-
- def get_property_by_offset(self, prop_offset, quiet=()):
- """Obtains a property that can be examined
-
- Args:
- prop_offset: Offset of property (e.g. from first_property_offset())
- quiet: Errors to ignore (empty to raise on all errors)
-
- Returns:
- Property object, or None if not found
-
- Raises:
- FdtException on error (e.g. invalid prop_offset or device
- tree format)
- """
- pdata = check_err_null(
- fdt_get_property_by_offset(self._fdt, prop_offset), quiet)
- if isinstance(pdata, (int)):
- return pdata
- return Property(pdata[0], pdata[1])
-
- def first_subnode(self, nodeoffset, quiet=()):
- """Find the first subnode of a parent node
-
- Args:
- nodeoffset: Node offset of parent node
- quiet: Errors to ignore (empty to raise on all errors)
-
- Returns:
- The offset of the first subnode, if any
-
- Raises:
- FdtException if no subnode found or other error occurs
- """
- return check_err(fdt_first_subnode(self._fdt, nodeoffset), quiet)
-
- def next_subnode(self, nodeoffset, quiet=()):
- """Find the next subnode
-
- Args:
- nodeoffset: Node offset of previous subnode
- quiet: Errors to ignore (empty to raise on all errors)
-
- Returns:
- The offset of the next subnode, if any
-
- Raises:
- FdtException if no more subnode found or other error occurs
- """
- return check_err(fdt_next_subnode(self._fdt, nodeoffset), quiet)
-
- def totalsize(self):
- """Return the total size of the device tree
-
- Returns:
- Total tree size in bytes
- """
- return check_err(fdt_totalsize(self._fdt))
-
- def off_dt_struct(self):
- """Return the start of the device tree struct area
-
- Returns:
- Start offset of struct area
- """
- return check_err(fdt_off_dt_struct(self._fdt))
-
- def pack(self, quiet=()):
- """Pack the device tree to remove unused space
-
- This adjusts the tree in place.
-
- Args:
- quiet: Errors to ignore (empty to raise on all errors)
-
- Raises:
- FdtException if any error occurs
- """
- return check_err(fdt_pack(self._fdt), quiet)
-
- def delprop(self, nodeoffset, prop_name):
- """Delete a property from a node
-
- Args:
- nodeoffset: Node offset containing property to delete
- prop_name: Name of property to delete
-
- Raises:
- FdtError if the property does not exist, or another error occurs
- """
- return check_err(fdt_delprop(self._fdt, nodeoffset, prop_name))
-
- def getprop(self, nodeoffset, prop_name, quiet=()):
- """Get a property from a node
-
- Args:
- nodeoffset: Node offset containing property to get
- prop_name: Name of property to get
- quiet: Errors to ignore (empty to raise on all errors)
-
- Returns:
- Value of property as a bytearray, or -ve error number
-
- Raises:
- FdtError if any error occurs (e.g. the property is not found)
- """
- pdata = check_err_null(fdt_getprop(self._fdt, nodeoffset, prop_name),
- quiet)
- if isinstance(pdata, (int)):
- return pdata
- return bytearray(pdata[0])
-
- def get_phandle(self, nodeoffset):
- """Get the phandle of a node
-
- Args:
- nodeoffset: Node offset to check
-
- Returns:
- phandle of node, or 0 if the node has no phandle or another error
- occurs
- """
- return fdt_get_phandle(self._fdt, nodeoffset)
-
- def parent_offset(self, nodeoffset, quiet=()):
- """Get the offset of a node's parent
-
- Args:
- nodeoffset: Node offset to check
- quiet: Errors to ignore (empty to raise on all errors)
-
- Returns:
- The offset of the parent node, if any
-
- Raises:
- FdtException if no parent found or other error occurs
- """
- return check_err(fdt_parent_offset(self._fdt, nodeoffset), quiet)
-
- def node_offset_by_phandle(self, phandle, quiet=()):
- """Get the offset of a node with the given phandle
-
- Args:
- phandle: Phandle to search for
- quiet: Errors to ignore (empty to raise on all errors)
-
- Returns:
- The offset of node with that phandle, if any
-
- Raises:
- FdtException if no node found or other error occurs
- """
- return check_err(fdt_node_offset_by_phandle(self._fdt, phandle), quiet)
-
-class Property:
- """Holds a device tree property name and value.
-
- This holds a copy of a property taken from the device tree. It does not
- reference the device tree, so if anything changes in the device tree,
- a Property object will remain valid.
-
- Properties:
- name: Property name
- value: Proper value as a bytearray
- """
- def __init__(self, name, value):
- self.name = name
- self.value = value
-%}
-
-%rename(fdt_property) fdt_property_func;
-
-typedef int fdt32_t;
-
-%include "libfdt/fdt.h"
-
-%include "typemaps.i"
-
-/* Most functions don't change the device tree, so use a const void * */
-%typemap(in) (const void *)(const void *fdt) {
- if (!PyByteArray_Check($input)) {
- SWIG_exception_fail(SWIG_TypeError, "in method '" "$symname"
- "', argument " "$argnum"" of type '" "$type""'");
- }
- $1 = (void *)PyByteArray_AsString($input);
- fdt = $1;
- fdt = fdt; /* avoid unused variable warning */
-}
-
-/* Some functions do change the device tree, so use void * */
-%typemap(in) (void *)(const void *fdt) {
- if (!PyByteArray_Check($input)) {
- SWIG_exception_fail(SWIG_TypeError, "in method '" "$symname"
- "', argument " "$argnum"" of type '" "$type""'");
- }
- $1 = PyByteArray_AsString($input);
- fdt = $1;
- fdt = fdt; /* avoid unused variable warning */
-}
-
-%typemap(out) (struct fdt_property *) {
- PyObject *buff;
-
- if ($1) {
- resultobj = PyString_FromString(
- fdt_string(fdt1, fdt32_to_cpu($1->nameoff)));
- buff = PyByteArray_FromStringAndSize(
- (const char *)($1 + 1), fdt32_to_cpu($1->len));
- resultobj = SWIG_Python_AppendOutput(resultobj, buff);
- }
-}
-
-%apply int *OUTPUT { int *lenp };
-
-/* typemap used for fdt_getprop() */
-%typemap(out) (const void *) {
- if (!$1)
- $result = Py_None;
- else
- $result = Py_BuildValue("s#", $1, *arg4);
-}
-
-/* We have both struct fdt_property and a function fdt_property() */
-%warnfilter(302) fdt_property;
-
-/* These are macros in the header so have to be redefined here */
-int fdt_magic(const void *fdt);
-int fdt_totalsize(const void *fdt);
-int fdt_off_dt_struct(const void *fdt);
-int fdt_off_dt_strings(const void *fdt);
-int fdt_off_mem_rsvmap(const void *fdt);
-int fdt_version(const void *fdt);
-int fdt_last_comp_version(const void *fdt);
-int fdt_boot_cpuid_phys(const void *fdt);
-int fdt_size_dt_strings(const void *fdt);
-int fdt_size_dt_struct(const void *fdt);
-
-%include <../libfdt/libfdt.h>
+++ /dev/null
-#!/usr/bin/env python
-
-"""
-setup.py file for SWIG libfdt
-Copyright (C) 2017 Google, Inc.
-Written by Simon Glass <sjg@chromium.org>
-
-SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause
-
-Files to be built into the extension are provided in SOURCES
-C flags to use are provided in CPPFLAGS
-Object file directory is provided in OBJDIR
-Version is provided in VERSION
-
-If these variables are not given they are parsed from the Makefiles. This
-allows this script to be run stand-alone, e.g.:
-
- ./pylibfdt/setup.py install [--prefix=...]
-"""
-
-from distutils.core import setup, Extension
-import os
-import re
-import sys
-
-# Decodes a Makefile assignment line into key and value (and plus for +=)
-RE_KEY_VALUE = re.compile('(?P<key>\w+) *(?P<plus>[+])?= *(?P<value>.*)$')
-
-
-def ParseMakefile(fname):
- """Parse a Makefile to obtain its variables.
-
- This collects variable assigments of the form:
-
- VAR = value
- VAR += more
-
- It does not pick out := assignments, as these are not needed here. It does
- handle line continuation.
-
- Returns a dict:
- key: Variable name (e.g. 'VAR')
- value: Variable value (e.g. 'value more')
- """
- makevars = {}
- with open(fname) as fd:
- prev_text = '' # Continuation text from previous line(s)
- for line in fd.read().splitlines():
- if line and line[-1] == '\\': # Deal with line continuation
- prev_text += line[:-1]
- continue
- elif prev_text:
- line = prev_text + line
- prev_text = '' # Continuation is now used up
- m = RE_KEY_VALUE.match(line)
- if m:
- value = m.group('value') or ''
- key = m.group('key')
-
- # Appending to a variable inserts a space beforehand
- if 'plus' in m.groupdict() and key in makevars:
- makevars[key] += ' ' + value
- else:
- makevars[key] = value
- return makevars
-
-def GetEnvFromMakefiles():
- """Scan the Makefiles to obtain the settings we need.
-
- This assumes that this script is being run from the top-level directory,
- not the pylibfdt directory.
-
- Returns:
- Tuple with:
- List of swig options
- Version string
- List of files to build
- List of extra C preprocessor flags needed
- Object directory to use (always '')
- """
- basedir = os.path.dirname(os.path.dirname(os.path.abspath(sys.argv[0])))
- swig_opts = ['-I%s' % basedir]
- makevars = ParseMakefile(os.path.join(basedir, 'Makefile'))
- version = '%s.%s.%s' % (makevars['VERSION'], makevars['PATCHLEVEL'],
- makevars['SUBLEVEL'])
- makevars = ParseMakefile(os.path.join(basedir, 'libfdt', 'Makefile.libfdt'))
- files = makevars['LIBFDT_SRCS'].split()
- files = [os.path.join(basedir, 'libfdt', fname) for fname in files]
- files.append('pylibfdt/libfdt.i')
- cflags = ['-I%s' % basedir, '-I%s/libfdt' % basedir]
- objdir = ''
- return swig_opts, version, files, cflags, objdir
-
-
-progname = sys.argv[0]
-files = os.environ.get('SOURCES', '').split()
-cflags = os.environ.get('CPPFLAGS', '').split()
-objdir = os.environ.get('OBJDIR')
-version = os.environ.get('VERSION')
-swig_opts = os.environ.get('SWIG_OPTS', '').split()
-
-# If we were called directly rather than through our Makefile (which is often
-# the case with Python module installation), read the settings from the
-# Makefile.
-if not all((swig_opts, version, files, cflags, objdir)):
- swig_opts, version, files, cflags, objdir = GetEnvFromMakefiles()
-
-libfdt_module = Extension(
- '_libfdt',
- sources = files,
- extra_compile_args = cflags,
- swig_opts = swig_opts,
-)
-
-setup(
- name='libfdt',
- version= version,
- author='Simon Glass <sjg@chromium.org>',
- description='Python binding for libfdt',
- ext_modules=[libfdt_module],
- package_dir={'': objdir},
- py_modules=['pylibfdt/libfdt'],
-)
$(obj)/$(SPL_BIN).dtb: dts/dt.dtb $(objtree)/tools/fdtgrep FORCE
$(call if_changed,fdtgrep)
-pythonpath = PYTHONPATH=tools
+pythonpath = PYTHONPATH=scripts/dtc/pylibfdt
quiet_cmd_dtocc = DTOC C $@
cmd_dtocc = $(pythonpath) $(srctree)/tools/dtoc/dtoc -d $(obj)/$(SPL_BIN).dtb -o $@ platdata
dts_dir:
$(shell [ -d $(obj)/dts ] || mkdir -p $(obj)/dts)
-include/generated/dt-structs-gen.h: $(obj)/$(SPL_BIN).dtb dts_dir checkdtoc
+include/generated/dt-structs-gen.h: $(obj)/$(SPL_BIN).dtb dts_dir FORCE
$(call if_changed,dtoch)
-$(obj)/dts/dt-platdata.c: $(obj)/$(SPL_BIN).dtb dts_dir checkdtoc
+$(obj)/dts/dt-platdata.c: $(obj)/$(SPL_BIN).dtb dts_dir FORCE
$(call if_changed,dtocc)
ifdef CONFIG_SAMSUNG
include $(cmd_files)
endif
-checkdtoc: tools
- @if ! ( echo 'import libfdt' | ( PYTHONPATH=tools $(PYTHON) )); then \
- echo '*** dtoc needs the Python libfdt library. Either '; \
- echo '*** install it on your system, or try:'; \
- echo '***'; \
- echo '*** sudo apt-get install swig libpython-dev'; \
- echo '***'; \
- echo '*** to have U-Boot build its own version.'; \
- false; \
- fi
-
PHONY += FORCE
FORCE:
# generated files need to be cleaned explicitly
clean-files := dtc-lexer.lex.c dtc-parser.tab.c dtc-parser.tab.h
+
+# Added for U-Boot
+subdir-$(CONFIG_PYLIBFDT) += pylibfdt
WARNING(obsolete_chosen_interrupt_controller,
check_obsolete_chosen_interrupt_controller, NULL);
+struct provider {
+ const char *prop_name;
+ const char *cell_name;
+ bool optional;
+};
+
+static void check_property_phandle_args(struct check *c,
+ struct dt_info *dti,
+ struct node *node,
+ struct property *prop,
+ const struct provider *provider)
+{
+ struct node *root = dti->dt;
+ int cell, cellsize = 0;
+
+ if (prop->val.len % sizeof(cell_t)) {
+ FAIL(c, dti, "property '%s' size (%d) is invalid, expected multiple of %zu in node %s",
+ prop->name, prop->val.len, sizeof(cell_t), node->fullpath);
+ return;
+ }
+
+ for (cell = 0; cell < prop->val.len / sizeof(cell_t); cell += cellsize + 1) {
+ struct node *provider_node;
+ struct property *cellprop;
+ int phandle;
+
+ phandle = propval_cell_n(prop, cell);
+ /*
+ * Some bindings use a cell value 0 or -1 to skip over optional
+ * entries when each index position has a specific definition.
+ */
+ if (phandle == 0 || phandle == -1) {
+ cellsize = 0;
+ continue;
+ }
+
+ /* If we have markers, verify the current cell is a phandle */
+ if (prop->val.markers) {
+ struct marker *m = prop->val.markers;
+ for_each_marker_of_type(m, REF_PHANDLE) {
+ if (m->offset == (cell * sizeof(cell_t)))
+ break;
+ }
+ if (!m)
+ FAIL(c, dti, "Property '%s', cell %d is not a phandle reference in %s",
+ prop->name, cell, node->fullpath);
+ }
+
+ provider_node = get_node_by_phandle(root, phandle);
+ if (!provider_node) {
+ FAIL(c, dti, "Could not get phandle node for %s:%s(cell %d)",
+ node->fullpath, prop->name, cell);
+ break;
+ }
+
+ cellprop = get_property(provider_node, provider->cell_name);
+ if (cellprop) {
+ cellsize = propval_cell(cellprop);
+ } else if (provider->optional) {
+ cellsize = 0;
+ } else {
+ FAIL(c, dti, "Missing property '%s' in node %s or bad phandle (referred from %s:%s[%d])",
+ provider->cell_name,
+ provider_node->fullpath,
+ node->fullpath, prop->name, cell);
+ break;
+ }
+
+ if (prop->val.len < ((cell + cellsize + 1) * sizeof(cell_t))) {
+ FAIL(c, dti, "%s property size (%d) too small for cell size %d in %s",
+ prop->name, prop->val.len, cellsize, node->fullpath);
+ }
+ }
+}
+
+static void check_provider_cells_property(struct check *c,
+ struct dt_info *dti,
+ struct node *node)
+{
+ struct provider *provider = c->data;
+ struct property *prop;
+
+ prop = get_property(node, provider->prop_name);
+ if (!prop)
+ return;
+
+ check_property_phandle_args(c, dti, node, prop, provider);
+}
+#define WARNING_PROPERTY_PHANDLE_CELLS(nm, propname, cells_name, ...) \
+ static struct provider nm##_provider = { (propname), (cells_name), __VA_ARGS__ }; \
+ WARNING(nm##_property, check_provider_cells_property, &nm##_provider, &phandle_references);
+
+WARNING_PROPERTY_PHANDLE_CELLS(clocks, "clocks", "#clock-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(cooling_device, "cooling-device", "#cooling-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(dmas, "dmas", "#dma-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(hwlocks, "hwlocks", "#hwlock-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(interrupts_extended, "interrupts-extended", "#interrupt-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(io_channels, "io-channels", "#io-channel-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(iommus, "iommus", "#iommu-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(mboxes, "mboxes", "#mbox-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(msi_parent, "msi-parent", "#msi-cells", true);
+WARNING_PROPERTY_PHANDLE_CELLS(mux_controls, "mux-controls", "#mux-control-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(phys, "phys", "#phy-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(power_domains, "power-domains", "#power-domain-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(pwms, "pwms", "#pwm-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(resets, "resets", "#reset-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(sound_dais, "sound-dais", "#sound-dai-cells");
+WARNING_PROPERTY_PHANDLE_CELLS(thermal_sensors, "thermal-sensors", "#thermal-sensor-cells");
+
+static bool prop_is_gpio(struct property *prop)
+{
+ char *str;
+
+ /*
+ * *-gpios and *-gpio can appear in property names,
+ * so skip over any false matches (only one known ATM)
+ */
+ if (strstr(prop->name, "nr-gpio"))
+ return false;
+
+ str = strrchr(prop->name, '-');
+ if (str)
+ str++;
+ else
+ str = prop->name;
+ if (!(streq(str, "gpios") || streq(str, "gpio")))
+ return false;
+
+ return true;
+}
+
+static void check_gpios_property(struct check *c,
+ struct dt_info *dti,
+ struct node *node)
+{
+ struct property *prop;
+
+ /* Skip GPIO hog nodes which have 'gpios' property */
+ if (get_property(node, "gpio-hog"))
+ return;
+
+ for_each_property(node, prop) {
+ struct provider provider;
+
+ if (!prop_is_gpio(prop))
+ continue;
+
+ provider.prop_name = prop->name;
+ provider.cell_name = "#gpio-cells";
+ provider.optional = false;
+ check_property_phandle_args(c, dti, node, prop, &provider);
+ }
+
+}
+WARNING(gpios_property, check_gpios_property, NULL, &phandle_references);
+
+static void check_deprecated_gpio_property(struct check *c,
+ struct dt_info *dti,
+ struct node *node)
+{
+ struct property *prop;
+
+ for_each_property(node, prop) {
+ char *str;
+
+ if (!prop_is_gpio(prop))
+ continue;
+
+ str = strstr(prop->name, "gpio");
+ if (!streq(str, "gpio"))
+ continue;
+
+ FAIL(c, dti, "'[*-]gpio' is deprecated, use '[*-]gpios' instead for %s:%s",
+ node->fullpath, prop->name);
+ }
+
+}
+CHECK(deprecated_gpio_property, check_deprecated_gpio_property, NULL);
+
+static bool node_is_interrupt_provider(struct node *node)
+{
+ struct property *prop;
+
+ prop = get_property(node, "interrupt-controller");
+ if (prop)
+ return true;
+
+ prop = get_property(node, "interrupt-map");
+ if (prop)
+ return true;
+
+ return false;
+}
+static void check_interrupts_property(struct check *c,
+ struct dt_info *dti,
+ struct node *node)
+{
+ struct node *root = dti->dt;
+ struct node *irq_node = NULL, *parent = node;
+ struct property *irq_prop, *prop = NULL;
+ int irq_cells, phandle;
+
+ irq_prop = get_property(node, "interrupts");
+ if (!irq_prop)
+ return;
+
+ if (irq_prop->val.len % sizeof(cell_t))
+ FAIL(c, dti, "property '%s' size (%d) is invalid, expected multiple of %zu in node %s",
+ irq_prop->name, irq_prop->val.len, sizeof(cell_t),
+ node->fullpath);
+
+ while (parent && !prop) {
+ if (parent != node && node_is_interrupt_provider(parent)) {
+ irq_node = parent;
+ break;
+ }
+
+ prop = get_property(parent, "interrupt-parent");
+ if (prop) {
+ phandle = propval_cell(prop);
+ irq_node = get_node_by_phandle(root, phandle);
+ if (!irq_node) {
+ FAIL(c, dti, "Bad interrupt-parent phandle for %s",
+ node->fullpath);
+ return;
+ }
+ if (!node_is_interrupt_provider(irq_node))
+ FAIL(c, dti,
+ "Missing interrupt-controller or interrupt-map property in %s",
+ irq_node->fullpath);
+
+ break;
+ }
+
+ parent = parent->parent;
+ }
+
+ if (!irq_node) {
+ FAIL(c, dti, "Missing interrupt-parent for %s", node->fullpath);
+ return;
+ }
+
+ prop = get_property(irq_node, "#interrupt-cells");
+ if (!prop) {
+ FAIL(c, dti, "Missing #interrupt-cells in interrupt-parent %s",
+ irq_node->fullpath);
+ return;
+ }
+
+ irq_cells = propval_cell(prop);
+ if (irq_prop->val.len % (irq_cells * sizeof(cell_t))) {
+ FAIL(c, dti,
+ "interrupts size is (%d), expected multiple of %d in %s",
+ irq_prop->val.len, (int)(irq_cells * sizeof(cell_t)),
+ node->fullpath);
+ }
+}
+WARNING(interrupts_property, check_interrupts_property, &phandle_references);
+
static struct check *check_table[] = {
&duplicate_node_names, &duplicate_property_names,
&node_name_chars, &node_name_format, &property_name_chars,
&avoid_default_addr_size,
&obsolete_chosen_interrupt_controller,
+ &clocks_property,
+ &cooling_device_property,
+ &dmas_property,
+ &hwlocks_property,
+ &interrupts_extended_property,
+ &io_channels_property,
+ &iommus_property,
+ &mboxes_property,
+ &msi_parent_property,
+ &mux_controls_property,
+ &phys_property,
+ &power_domains_property,
+ &pwms_property,
+ &resets_property,
+ &sound_dais_property,
+ &thermal_sensors_property,
+
+ &deprecated_gpio_property,
+ &gpios_property,
+ &interrupts_property,
+
&always_fail,
};
#define FLEX_SCANNER
#define YY_FLEX_MAJOR_VERSION 2
-#define YY_FLEX_MINOR_VERSION 5
-#define YY_FLEX_SUBMINOR_VERSION 35
+#define YY_FLEX_MINOR_VERSION 6
+#define YY_FLEX_SUBMINOR_VERSION 1
#if YY_FLEX_SUBMINOR_VERSION > 0
#define FLEX_BETA
#endif
#endif /* ! FLEXINT_H */
-#ifdef __cplusplus
-
-/* The "const" storage-class-modifier is valid. */
-#define YY_USE_CONST
-
-#else /* ! __cplusplus */
-
-/* C99 requires __STDC__ to be defined as 1. */
-#if defined (__STDC__)
-
-#define YY_USE_CONST
-
-#endif /* defined (__STDC__) */
-#endif /* ! __cplusplus */
-
-#ifdef YY_USE_CONST
+/* TODO: this is always defined, so inline it */
#define yyconst const
+
+#if defined(__GNUC__) && __GNUC__ >= 3
+#define yynoreturn __attribute__((__noreturn__))
#else
-#define yyconst
+#define yynoreturn
#endif
/* Returned upon end-of-file. */
typedef struct yy_buffer_state *YY_BUFFER_STATE;
#endif
+#ifndef YY_TYPEDEF_YY_SIZE_T
+#define YY_TYPEDEF_YY_SIZE_T
+typedef size_t yy_size_t;
+#endif
+
extern int yyleng;
extern FILE *yyin, *yyout;
#define EOB_ACT_LAST_MATCH 2
#define YY_LESS_LINENO(n)
+ #define YY_LINENO_REWIND_TO(ptr)
/* Return all but the first "n" matched characters back to the input stream. */
#define yyless(n) \
#define unput(c) yyunput( c, (yytext_ptr) )
-#ifndef YY_TYPEDEF_YY_SIZE_T
-#define YY_TYPEDEF_YY_SIZE_T
-typedef size_t yy_size_t;
-#endif
-
#ifndef YY_STRUCT_YY_BUFFER_STATE
#define YY_STRUCT_YY_BUFFER_STATE
struct yy_buffer_state
/* Size of input buffer in bytes, not including room for EOB
* characters.
*/
- yy_size_t yy_buf_size;
+ int yy_buf_size;
/* Number of characters read into yy_ch_buf, not including EOB
* characters.
int yy_bs_lineno; /**< The line count. */
int yy_bs_column; /**< The column count. */
-
+
/* Whether to try to fill the input buffer when we reach the
* end of it.
*/
/* Stack of input buffers. */
static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
-static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */
+static YY_BUFFER_STATE * yy_buffer_stack = NULL; /**< Stack as an array. */
/* We provide macros for accessing buffer states in case in the
* future we want to put the buffer states in a more general
int yyleng;
/* Points to current character in buffer. */
-static char *yy_c_buf_p = (char *) 0;
+static char *yy_c_buf_p = NULL;
static int yy_init = 0; /* whether we need to initialize */
static int yy_start = 0; /* start state number */
/* Begin user sect3 */
-#define yywrap(n) 1
+#define yywrap() (/*CONSTCOND*/1)
#define YY_SKIP_YYWRAP
typedef unsigned char YY_CHAR;
-FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
+FILE *yyin = NULL, *yyout = NULL;
typedef int yy_state_type;
int yylineno = 1;
extern char *yytext;
+#ifdef yytext_ptr
+#undef yytext_ptr
+#endif
#define yytext_ptr yytext
static yy_state_type yy_get_previous_state (void );
static yy_state_type yy_try_NUL_trans (yy_state_type current_state );
static int yy_get_next_buffer (void );
-static void yy_fatal_error (yyconst char msg[] );
+static void yynoreturn yy_fatal_error (yyconst char* msg );
/* Done after the current pattern has been matched and before the
* corresponding action - sets up yytext.
*/
#define YY_DO_BEFORE_ACTION \
(yytext_ptr) = yy_bp; \
- yyleng = (size_t) (yy_cp - yy_bp); \
+ yyleng = (int) (yy_cp - yy_bp); \
(yy_hold_char) = *yy_cp; \
*yy_cp = '\0'; \
(yy_c_buf_p) = yy_cp;
0, 0, 0, 8, 0
} ;
-static yyconst flex_int32_t yy_ec[256] =
+static yyconst YY_CHAR yy_ec[256] =
{ 0,
1, 1, 1, 1, 1, 1, 1, 1, 2, 3,
4, 4, 4, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1
} ;
-static yyconst flex_int32_t yy_meta[48] =
+static yyconst YY_CHAR yy_meta[48] =
{ 0,
1, 1, 1, 1, 1, 1, 2, 3, 1, 2,
2, 2, 4, 5, 5, 5, 6, 1, 1, 1,
8, 8, 8, 8, 3, 1, 4
} ;
-static yyconst flex_int16_t yy_base[180] =
+static yyconst flex_uint16_t yy_base[180] =
{ 0,
0, 393, 35, 392, 66, 391, 38, 107, 397, 401,
55, 113, 377, 112, 111, 111, 114, 42, 376, 106,
165, 165, 165, 165, 165, 165, 165, 165, 165
} ;
-static yyconst flex_int16_t yy_nxt[449] =
+static yyconst flex_uint16_t yy_nxt[449] =
{ 0,
10, 11, 12, 11, 13, 14, 10, 15, 16, 10,
10, 10, 17, 10, 10, 10, 10, 18, 19, 20,
static bool pop_input_file(void);
static void PRINTF(1, 2) lexical_error(const char *fmt, ...);
-#line 669 "dtc-lexer.lex.c"
+#line 661 "dtc-lexer.lex.c"
#define INITIAL 0
#define BYTESTRING 1
FILE *yyget_in (void );
-void yyset_in (FILE * in_str );
+void yyset_in (FILE * _in_str );
FILE *yyget_out (void );
-void yyset_out (FILE * out_str );
+void yyset_out (FILE * _out_str );
-int yyget_leng (void );
+ int yyget_leng (void );
char *yyget_text (void );
int yyget_lineno (void );
-void yyset_lineno (int line_number );
+void yyset_lineno (int _line_number );
/* Macros after this point can all be overridden by user definitions in
* section 1.
#endif
#endif
+#ifndef YY_NO_UNPUT
+
+#endif
+
#ifndef yytext_ptr
static void yy_flex_strncpy (char *,yyconst char *,int );
#endif
/* This used to be an fputs(), but since the string might contain NUL's,
* we now use fwrite().
*/
-#define ECHO do { if (fwrite( yytext, yyleng, 1, yyout )) {} } while (0)
+#define ECHO do { if (fwrite( yytext, (size_t) yyleng, 1, yyout )) {} } while (0)
#endif
/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
else \
{ \
errno=0; \
- while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \
+ while ( (result = (int) fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \
{ \
if( errno != EINTR) \
{ \
/* Code executed at the end of each rule. */
#ifndef YY_BREAK
-#define YY_BREAK break;
+#define YY_BREAK /*LINTED*/break;
#endif
#define YY_RULE_SETUP \
*/
YY_DECL
{
- register yy_state_type yy_current_state;
- register char *yy_cp, *yy_bp;
- register int yy_act;
+ yy_state_type yy_current_state;
+ char *yy_cp, *yy_bp;
+ int yy_act;
-#line 69 "dtc-lexer.l"
-
-#line 862 "dtc-lexer.lex.c"
-
if ( !(yy_init) )
{
(yy_init) = 1;
yy_load_buffer_state( );
}
- while ( 1 ) /* loops until end-of-file is reached */
+ {
+#line 69 "dtc-lexer.l"
+
+#line 885 "dtc-lexer.lex.c"
+
+ while ( /*CONSTCOND*/1 ) /* loops until end-of-file is reached */
{
yy_cp = (yy_c_buf_p);
yy_match:
do
{
- register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
+ YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ;
if ( yy_accept[yy_current_state] )
{
(yy_last_accepting_state) = yy_current_state;
if ( yy_current_state >= 166 )
yy_c = yy_meta[(unsigned int) yy_c];
}
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
+ yy_current_state = yy_nxt[yy_base[yy_current_state] + (flex_int16_t) yy_c];
++yy_cp;
}
while ( yy_current_state != 165 );
#line 272 "dtc-lexer.l"
ECHO;
YY_BREAK
-#line 1260 "dtc-lexer.lex.c"
+#line 1257 "dtc-lexer.lex.c"
case YY_END_OF_BUFFER:
{
"fatal flex scanner internal error--no action found" );
} /* end of action switch */
} /* end of scanning one token */
+ } /* end of user's declarations */
} /* end of yylex */
/* yy_get_next_buffer - try to read in a new buffer
*/
static int yy_get_next_buffer (void)
{
- register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
- register char *source = (yytext_ptr);
- register int number_to_move, i;
+ char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
+ char *source = (yytext_ptr);
+ int number_to_move, i;
int ret_val;
if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
/* Try to read more data. */
/* First move last chars to start of buffer. */
- number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
+ number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr) - 1);
for ( i = 0; i < number_to_move; ++i )
*(dest++) = *(source++);
{ /* Not enough room in the buffer - grow it. */
/* just a shorter name for the current buffer */
- YY_BUFFER_STATE b = YY_CURRENT_BUFFER;
+ YY_BUFFER_STATE b = YY_CURRENT_BUFFER_LVALUE;
int yy_c_buf_p_offset =
(int) ((yy_c_buf_p) - b->yy_ch_buf);
}
else
/* Can't grow it, we don't own it. */
- b->yy_ch_buf = 0;
+ b->yy_ch_buf = NULL;
if ( ! b->yy_ch_buf )
YY_FATAL_ERROR(
/* Read in more data. */
YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
- (yy_n_chars), (size_t) num_to_read );
+ (yy_n_chars), num_to_read );
YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
}
else
ret_val = EOB_ACT_CONTINUE_SCAN;
- if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
+ if (((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
/* Extend the array by 50%, plus the number we really need. */
- yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
+ int new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size );
if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
static yy_state_type yy_get_previous_state (void)
{
- register yy_state_type yy_current_state;
- register char *yy_cp;
+ yy_state_type yy_current_state;
+ char *yy_cp;
yy_current_state = (yy_start);
yy_current_state += YY_AT_BOL();
for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
{
- register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
+ YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
if ( yy_accept[yy_current_state] )
{
(yy_last_accepting_state) = yy_current_state;
if ( yy_current_state >= 166 )
yy_c = yy_meta[(unsigned int) yy_c];
}
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
+ yy_current_state = yy_nxt[yy_base[yy_current_state] + (flex_int16_t) yy_c];
}
return yy_current_state;
*/
static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
{
- register int yy_is_jam;
- register char *yy_cp = (yy_c_buf_p);
+ int yy_is_jam;
+ char *yy_cp = (yy_c_buf_p);
- register YY_CHAR yy_c = 1;
+ YY_CHAR yy_c = 1;
if ( yy_accept[yy_current_state] )
{
(yy_last_accepting_state) = yy_current_state;
if ( yy_current_state >= 166 )
yy_c = yy_meta[(unsigned int) yy_c];
}
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
+ yy_current_state = yy_nxt[yy_base[yy_current_state] + (flex_int16_t) yy_c];
yy_is_jam = (yy_current_state == 165);
- return yy_is_jam ? 0 : yy_current_state;
+ return yy_is_jam ? 0 : yy_current_state;
}
+#ifndef YY_NO_UNPUT
+
+#endif
+
#ifndef YY_NO_INPUT
#ifdef __cplusplus
static int yyinput (void)
case EOB_ACT_END_OF_FILE:
{
if ( yywrap( ) )
- return EOF;
+ return 0;
if ( ! (yy_did_buffer_switch_on_eof) )
YY_NEW_FILE;
if ( ! b )
YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
- b->yy_buf_size = size;
+ b->yy_buf_size = (yy_size_t)size;
/* yy_ch_buf has to be 2 characters longer than the size given because
* we need to put in 2 end-of-buffer characters.
* scanner will even need a stack. We use 2 instead of 1 to avoid an
* immediate realloc on the next call.
*/
- num_to_alloc = 1;
+ num_to_alloc = 1; /* After all that talk, this was set to 1 anyways... */
(yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
(num_to_alloc * sizeof(struct yy_buffer_state*)
);
if ( ! (yy_buffer_stack) )
YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
-
+
memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
-
+
(yy_buffer_stack_max) = num_to_alloc;
(yy_buffer_stack_top) = 0;
return;
if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
/* Increase the buffer to prepare for a possible push. */
- int grow_size = 8 /* arbitrary grow size */;
+ yy_size_t grow_size = 8 /* arbitrary grow size */;
num_to_alloc = (yy_buffer_stack_max) + grow_size;
(yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc
* @param base the character buffer
* @param size the size in bytes of the character buffer
*
- * @return the newly allocated buffer state object.
+ * @return the newly allocated buffer state object.
*/
YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size )
{
base[size-2] != YY_END_OF_BUFFER_CHAR ||
base[size-1] != YY_END_OF_BUFFER_CHAR )
/* They forgot to leave room for the EOB's. */
- return 0;
+ return NULL;
b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
if ( ! b )
b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
b->yy_buf_pos = b->yy_ch_buf = base;
b->yy_is_our_buffer = 0;
- b->yy_input_file = 0;
+ b->yy_input_file = NULL;
b->yy_n_chars = b->yy_buf_size;
b->yy_is_interactive = 0;
b->yy_at_bol = 1;
YY_BUFFER_STATE yy_scan_string (yyconst char * yystr )
{
- return yy_scan_bytes(yystr,strlen(yystr) );
+ return yy_scan_bytes(yystr,(int) strlen(yystr) );
}
/** Setup the input buffer state to scan the given bytes. The next call to yylex() will
int i;
/* Get memory for full buffer, including space for trailing EOB's. */
- n = _yybytes_len + 2;
+ n = (yy_size_t) (_yybytes_len + 2);
buf = (char *) yyalloc(n );
if ( ! buf )
YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
#define YY_EXIT_FAILURE 2
#endif
-static void yy_fatal_error (yyconst char* msg )
+static void yynoreturn yy_fatal_error (yyconst char* msg )
{
- (void) fprintf( stderr, "%s\n", msg );
+ (void) fprintf( stderr, "%s\n", msg );
exit( YY_EXIT_FAILURE );
}
*/
int yyget_lineno (void)
{
-
+
return yylineno;
}
}
/** Set the current line number.
- * @param line_number
+ * @param _line_number line number
*
*/
-void yyset_lineno (int line_number )
+void yyset_lineno (int _line_number )
{
- yylineno = line_number;
+ yylineno = _line_number;
}
/** Set the input stream. This does not discard the current
* input buffer.
- * @param in_str A readable stream.
+ * @param _in_str A readable stream.
*
* @see yy_switch_to_buffer
*/
-void yyset_in (FILE * in_str )
+void yyset_in (FILE * _in_str )
{
- yyin = in_str ;
+ yyin = _in_str ;
}
-void yyset_out (FILE * out_str )
+void yyset_out (FILE * _out_str )
{
- yyout = out_str ;
+ yyout = _out_str ;
}
int yyget_debug (void)
return yy_flex_debug;
}
-void yyset_debug (int bdebug )
+void yyset_debug (int _bdebug )
{
- yy_flex_debug = bdebug ;
+ yy_flex_debug = _bdebug ;
}
static int yy_init_globals (void)
* This function is called from yylex_destroy(), so don't allocate here.
*/
- (yy_buffer_stack) = 0;
+ (yy_buffer_stack) = NULL;
(yy_buffer_stack_top) = 0;
(yy_buffer_stack_max) = 0;
- (yy_c_buf_p) = (char *) 0;
+ (yy_c_buf_p) = NULL;
(yy_init) = 0;
(yy_start) = 0;
yyin = stdin;
yyout = stdout;
#else
- yyin = (FILE *) 0;
- yyout = (FILE *) 0;
+ yyin = NULL;
+ yyout = NULL;
#endif
/* For future reference: Set errno on error, since we are called by
#ifndef yytext_ptr
static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
{
- register int i;
+
+ int i;
for ( i = 0; i < n; ++i )
s1[i] = s2[i];
}
#ifdef YY_NEED_STRLEN
static int yy_flex_strlen (yyconst char * s )
{
- register int n;
+ int n;
for ( n = 0; s[n]; ++n )
;
void *yyalloc (yy_size_t size )
{
- return (void *) malloc( size );
+ return malloc(size);
}
void *yyrealloc (void * ptr, yy_size_t size )
{
+
/* The cast to (char *) in the following accommodates both
* implementations that use char* generic pointers, and those
* that use void* generic pointers. It works with the latter
* any pointer type to void*, and deal with argument conversions
* as though doing an assignment.
*/
- return (void *) realloc( (char *) ptr, size );
+ return realloc(ptr, size);
}
void yyfree (void * ptr )
{
- free( (char *) ptr ); /* see yyrealloc() for (char *) cast */
+ free( (char *) ptr ); /* see yyrealloc() for (char *) cast */
}
#define YYTABLES_NAME "yytables"
-/* A Bison parser, made by GNU Bison 3.0.2. */
+/* A Bison parser, made by GNU Bison 3.0.4. */
/* Bison implementation for Yacc-like parsers in C
- Copyright (C) 1984, 1989-1990, 2000-2013 Free Software Foundation, Inc.
+ Copyright (C) 1984, 1989-1990, 2000-2015 Free Software Foundation, Inc.
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
#define YYBISON 1
/* Bison version. */
-#define YYBISON_VERSION "3.0.2"
+#define YYBISON_VERSION "3.0.4"
/* Skeleton name. */
#define YYSKELETON_NAME "yacc.c"
/* Value type. */
#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
-typedef union YYSTYPE YYSTYPE;
+
union YYSTYPE
{
#line 39 "dtc-parser.y" /* yacc.c:355 */
#line 170 "dtc-parser.tab.c" /* yacc.c:355 */
};
+
+typedef union YYSTYPE YYSTYPE;
# define YYSTYPE_IS_TRIVIAL 1
# define YYSTYPE_IS_DECLARED 1
#endif
/* Copy the second part of user declarations. */
-#line 199 "dtc-parser.tab.c" /* yacc.c:358 */
+#line 201 "dtc-parser.tab.c" /* yacc.c:358 */
#ifdef short
# undef short
/* YYNNTS -- Number of nonterminals. */
#define YYNNTS 30
/* YYNRULES -- Number of rules. */
-#define YYNRULES 84
+#define YYNRULES 85
/* YYNSTATES -- Number of states. */
#define YYNSTATES 149
static const yytype_uint16 yyrline[] =
{
0, 109, 109, 117, 121, 128, 129, 139, 142, 149,
- 153, 161, 165, 170, 181, 191, 206, 214, 217, 224,
- 228, 232, 236, 244, 248, 252, 256, 260, 276, 286,
- 294, 297, 301, 308, 324, 329, 348, 362, 369, 370,
- 371, 378, 382, 383, 387, 388, 392, 393, 397, 398,
- 402, 403, 407, 408, 412, 413, 414, 418, 419, 420,
- 421, 422, 426, 427, 428, 432, 433, 434, 438, 439,
- 448, 457, 461, 462, 463, 464, 469, 472, 476, 484,
- 487, 491, 499, 503, 507
+ 153, 161, 165, 170, 181, 200, 213, 220, 228, 231,
+ 238, 242, 246, 250, 258, 262, 266, 270, 274, 290,
+ 300, 308, 311, 315, 322, 338, 343, 362, 376, 383,
+ 384, 385, 392, 396, 397, 401, 402, 406, 407, 411,
+ 412, 416, 417, 421, 422, 426, 427, 428, 432, 433,
+ 434, 435, 436, 440, 441, 442, 446, 447, 448, 452,
+ 453, 462, 471, 475, 476, 477, 478, 483, 486, 490,
+ 498, 501, 505, 513, 517, 521
};
#endif
static const yytype_uint8 yydefact[] =
{
0, 0, 0, 5, 7, 3, 1, 6, 0, 0,
- 0, 7, 0, 38, 39, 0, 0, 10, 0, 2,
- 8, 4, 0, 0, 0, 72, 0, 41, 42, 44,
- 46, 48, 50, 52, 54, 57, 64, 67, 71, 0,
- 17, 11, 0, 0, 0, 0, 73, 74, 75, 40,
+ 16, 7, 0, 39, 40, 0, 0, 10, 0, 2,
+ 8, 4, 0, 0, 0, 73, 0, 42, 43, 45,
+ 47, 49, 51, 53, 55, 58, 65, 68, 72, 0,
+ 18, 11, 0, 0, 0, 0, 74, 75, 76, 41,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 9,
- 79, 0, 0, 14, 12, 45, 0, 47, 49, 51,
- 53, 55, 56, 60, 61, 59, 58, 62, 63, 65,
- 66, 69, 68, 70, 0, 0, 0, 0, 18, 0,
- 79, 15, 13, 0, 0, 0, 20, 30, 82, 22,
- 84, 0, 81, 80, 43, 21, 83, 0, 0, 16,
- 29, 19, 31, 0, 23, 32, 26, 0, 76, 34,
- 0, 0, 0, 0, 37, 36, 24, 35, 33, 0,
- 77, 78, 25, 0, 28, 0, 0, 0, 27
+ 80, 0, 0, 14, 12, 46, 0, 48, 50, 52,
+ 54, 56, 57, 61, 62, 60, 59, 63, 64, 66,
+ 67, 70, 69, 71, 0, 0, 0, 0, 19, 0,
+ 80, 15, 13, 0, 0, 0, 21, 31, 83, 23,
+ 85, 0, 82, 81, 44, 22, 84, 0, 0, 17,
+ 30, 20, 32, 0, 24, 33, 27, 0, 77, 35,
+ 0, 0, 0, 0, 38, 37, 25, 36, 34, 0,
+ 78, 79, 26, 0, 29, 0, 0, 0, 28
};
/* YYPGOTO[NTERM-NUM]. */
static const yytype_uint8 yyr1[] =
{
0, 48, 49, 50, 50, 51, 51, 52, 52, 53,
- 53, 54, 54, 54, 54, 54, 55, 56, 56, 57,
- 57, 57, 57, 58, 58, 58, 58, 58, 58, 58,
- 59, 59, 59, 60, 60, 60, 60, 60, 61, 61,
- 61, 62, 63, 63, 64, 64, 65, 65, 66, 66,
- 67, 67, 68, 68, 69, 69, 69, 70, 70, 70,
- 70, 70, 71, 71, 71, 72, 72, 72, 73, 73,
- 73, 73, 74, 74, 74, 74, 75, 75, 75, 76,
- 76, 76, 77, 77, 77
+ 53, 54, 54, 54, 54, 54, 54, 55, 56, 56,
+ 57, 57, 57, 57, 58, 58, 58, 58, 58, 58,
+ 58, 59, 59, 59, 60, 60, 60, 60, 60, 61,
+ 61, 61, 62, 63, 63, 64, 64, 65, 65, 66,
+ 66, 67, 67, 68, 68, 69, 69, 69, 70, 70,
+ 70, 70, 70, 71, 71, 71, 72, 72, 72, 73,
+ 73, 73, 73, 74, 74, 74, 74, 75, 75, 75,
+ 76, 76, 76, 77, 77, 77
};
/* YYR2[YYN] -- Number of symbols on the right hand side of rule YYN. */
static const yytype_uint8 yyr2[] =
{
0, 2, 3, 2, 4, 1, 2, 0, 2, 4,
- 2, 2, 3, 4, 3, 4, 5, 0, 2, 4,
- 2, 3, 2, 2, 3, 4, 2, 9, 5, 2,
- 0, 2, 2, 3, 1, 2, 2, 2, 1, 1,
- 3, 1, 1, 5, 1, 3, 1, 3, 1, 3,
- 1, 3, 1, 3, 1, 3, 3, 1, 3, 3,
- 3, 3, 3, 3, 1, 3, 3, 1, 3, 3,
- 3, 1, 1, 2, 2, 2, 0, 2, 2, 0,
- 2, 2, 2, 3, 2
+ 2, 2, 3, 4, 3, 4, 0, 5, 0, 2,
+ 4, 2, 3, 2, 2, 3, 4, 2, 9, 5,
+ 2, 0, 2, 2, 3, 1, 2, 2, 2, 1,
+ 1, 3, 1, 1, 5, 1, 3, 1, 3, 1,
+ 3, 1, 3, 1, 3, 1, 3, 3, 1, 3,
+ 3, 3, 3, 3, 3, 1, 3, 3, 1, 3,
+ 3, 3, 1, 1, 2, 2, 2, 0, 2, 2,
+ 0, 2, 2, 2, 3, 2
};
parser_output = build_dt_info((yyvsp[-2].flags), (yyvsp[-1].re), (yyvsp[0].node),
guess_boot_cpuid((yyvsp[0].node)));
}
-#line 1476 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1478 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
case 3:
{
(yyval.flags) = DTSF_V1;
}
-#line 1484 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1486 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
case 4:
{
(yyval.flags) = DTSF_V1 | DTSF_PLUGIN;
}
-#line 1492 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1494 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
case 6:
ERROR(&(yylsp[0]), "Header flags don't match earlier ones");
(yyval.flags) = (yyvsp[-1].flags);
}
-#line 1502 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1504 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
case 7:
{
(yyval.re) = NULL;
}
-#line 1510 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1512 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
case 8:
{
(yyval.re) = chain_reserve_entry((yyvsp[-1].re), (yyvsp[0].re));
}
-#line 1518 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1520 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
case 9:
{
(yyval.re) = build_reserve_entry((yyvsp[-2].integer), (yyvsp[-1].integer));
}
-#line 1526 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1528 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
case 10:
add_label(&(yyvsp[0].re)->labels, (yyvsp[-1].labelref));
(yyval.re) = (yyvsp[0].re);
}
-#line 1535 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1537 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
case 11:
{
(yyval.node) = name_node((yyvsp[0].node), "");
}
-#line 1543 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1545 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
case 12:
{
(yyval.node) = merge_nodes((yyvsp[-2].node), (yyvsp[0].node));
}
-#line 1551 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1553 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
case 13:
ERROR(&(yylsp[-1]), "Label or path %s not found", (yyvsp[-1].labelref));
(yyval.node) = (yyvsp[-3].node);
}
-#line 1566 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1568 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
case 14:
{
struct node *target = get_node_by_ref((yyvsp[-2].node), (yyvsp[-1].labelref));
- if (target)
+ if (target) {
merge_nodes(target, (yyvsp[0].node));
- else
- ERROR(&(yylsp[-1]), "Label or path %s not found", (yyvsp[-1].labelref));
+ } else {
+ /*
+ * We rely on the rule being always:
+ * versioninfo plugindecl memreserves devicetree
+ * so $-1 is what we want (plugindecl)
+ */
+ if ((yyvsp[(-1) - (3)].flags) & DTSF_PLUGIN)
+ add_orphan_node((yyvsp[-2].node), (yyvsp[0].node), (yyvsp[-1].labelref));
+ else
+ ERROR(&(yylsp[-1]), "Label or path %s not found", (yyvsp[-1].labelref));
+ }
(yyval.node) = (yyvsp[-2].node);
}
-#line 1580 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1591 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
case 15:
-#line 192 "dtc-parser.y" /* yacc.c:1646 */
+#line 201 "dtc-parser.y" /* yacc.c:1646 */
{
struct node *target = get_node_by_ref((yyvsp[-3].node), (yyvsp[-1].labelref));
(yyval.node) = (yyvsp[-3].node);
}
-#line 1596 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1607 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
case 16:
-#line 207 "dtc-parser.y" /* yacc.c:1646 */
+#line 213 "dtc-parser.y" /* yacc.c:1646 */
{
- (yyval.node) = build_node((yyvsp[-3].proplist), (yyvsp[-2].nodelist));
+ /* build empty node */
+ (yyval.node) = name_node(build_node(NULL, NULL), "");
}
-#line 1604 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1616 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
case 17:
-#line 214 "dtc-parser.y" /* yacc.c:1646 */
+#line 221 "dtc-parser.y" /* yacc.c:1646 */
{
- (yyval.proplist) = NULL;
+ (yyval.node) = build_node((yyvsp[-3].proplist), (yyvsp[-2].nodelist));
}
-#line 1612 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1624 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
case 18:
-#line 218 "dtc-parser.y" /* yacc.c:1646 */
+#line 228 "dtc-parser.y" /* yacc.c:1646 */
{
- (yyval.proplist) = chain_property((yyvsp[0].prop), (yyvsp[-1].proplist));
+ (yyval.proplist) = NULL;
}
-#line 1620 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1632 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
case 19:
-#line 225 "dtc-parser.y" /* yacc.c:1646 */
+#line 232 "dtc-parser.y" /* yacc.c:1646 */
{
- (yyval.prop) = build_property((yyvsp[-3].propnodename), (yyvsp[-1].data));
+ (yyval.proplist) = chain_property((yyvsp[0].prop), (yyvsp[-1].proplist));
}
-#line 1628 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1640 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
case 20:
-#line 229 "dtc-parser.y" /* yacc.c:1646 */
+#line 239 "dtc-parser.y" /* yacc.c:1646 */
{
- (yyval.prop) = build_property((yyvsp[-1].propnodename), empty_data);
+ (yyval.prop) = build_property((yyvsp[-3].propnodename), (yyvsp[-1].data));
}
-#line 1636 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1648 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
case 21:
-#line 233 "dtc-parser.y" /* yacc.c:1646 */
+#line 243 "dtc-parser.y" /* yacc.c:1646 */
{
- (yyval.prop) = build_property_delete((yyvsp[-1].propnodename));
+ (yyval.prop) = build_property((yyvsp[-1].propnodename), empty_data);
}
-#line 1644 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1656 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
case 22:
-#line 237 "dtc-parser.y" /* yacc.c:1646 */
+#line 247 "dtc-parser.y" /* yacc.c:1646 */
+ {
+ (yyval.prop) = build_property_delete((yyvsp[-1].propnodename));
+ }
+#line 1664 "dtc-parser.tab.c" /* yacc.c:1646 */
+ break;
+
+ case 23:
+#line 251 "dtc-parser.y" /* yacc.c:1646 */
{
add_label(&(yyvsp[0].prop)->labels, (yyvsp[-1].labelref));
(yyval.prop) = (yyvsp[0].prop);
}
-#line 1653 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1673 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 23:
-#line 245 "dtc-parser.y" /* yacc.c:1646 */
+ case 24:
+#line 259 "dtc-parser.y" /* yacc.c:1646 */
{
(yyval.data) = data_merge((yyvsp[-1].data), (yyvsp[0].data));
}
-#line 1661 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1681 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 24:
-#line 249 "dtc-parser.y" /* yacc.c:1646 */
+ case 25:
+#line 263 "dtc-parser.y" /* yacc.c:1646 */
{
(yyval.data) = data_merge((yyvsp[-2].data), (yyvsp[-1].array).data);
}
-#line 1669 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1689 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 25:
-#line 253 "dtc-parser.y" /* yacc.c:1646 */
+ case 26:
+#line 267 "dtc-parser.y" /* yacc.c:1646 */
{
(yyval.data) = data_merge((yyvsp[-3].data), (yyvsp[-1].data));
}
-#line 1677 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1697 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 26:
-#line 257 "dtc-parser.y" /* yacc.c:1646 */
+ case 27:
+#line 271 "dtc-parser.y" /* yacc.c:1646 */
{
(yyval.data) = data_add_marker((yyvsp[-1].data), REF_PATH, (yyvsp[0].labelref));
}
-#line 1685 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1705 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 27:
-#line 261 "dtc-parser.y" /* yacc.c:1646 */
+ case 28:
+#line 275 "dtc-parser.y" /* yacc.c:1646 */
{
FILE *f = srcfile_relative_open((yyvsp[-5].data).val, NULL);
struct data d;
(yyval.data) = data_merge((yyvsp[-8].data), d);
fclose(f);
}
-#line 1705 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1725 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 28:
-#line 277 "dtc-parser.y" /* yacc.c:1646 */
+ case 29:
+#line 291 "dtc-parser.y" /* yacc.c:1646 */
{
FILE *f = srcfile_relative_open((yyvsp[-1].data).val, NULL);
struct data d = empty_data;
(yyval.data) = data_merge((yyvsp[-4].data), d);
fclose(f);
}
-#line 1719 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1739 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 29:
-#line 287 "dtc-parser.y" /* yacc.c:1646 */
+ case 30:
+#line 301 "dtc-parser.y" /* yacc.c:1646 */
{
(yyval.data) = data_add_marker((yyvsp[-1].data), LABEL, (yyvsp[0].labelref));
}
-#line 1727 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1747 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 30:
-#line 294 "dtc-parser.y" /* yacc.c:1646 */
+ case 31:
+#line 308 "dtc-parser.y" /* yacc.c:1646 */
{
(yyval.data) = empty_data;
}
-#line 1735 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1755 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 31:
-#line 298 "dtc-parser.y" /* yacc.c:1646 */
+ case 32:
+#line 312 "dtc-parser.y" /* yacc.c:1646 */
{
(yyval.data) = (yyvsp[-1].data);
}
-#line 1743 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1763 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 32:
-#line 302 "dtc-parser.y" /* yacc.c:1646 */
+ case 33:
+#line 316 "dtc-parser.y" /* yacc.c:1646 */
{
(yyval.data) = data_add_marker((yyvsp[-1].data), LABEL, (yyvsp[0].labelref));
}
-#line 1751 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1771 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 33:
-#line 309 "dtc-parser.y" /* yacc.c:1646 */
+ case 34:
+#line 323 "dtc-parser.y" /* yacc.c:1646 */
{
unsigned long long bits;
(yyval.array).data = empty_data;
(yyval.array).bits = bits;
}
-#line 1771 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1791 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 34:
-#line 325 "dtc-parser.y" /* yacc.c:1646 */
+ case 35:
+#line 339 "dtc-parser.y" /* yacc.c:1646 */
{
(yyval.array).data = empty_data;
(yyval.array).bits = 32;
}
-#line 1780 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1800 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 35:
-#line 330 "dtc-parser.y" /* yacc.c:1646 */
+ case 36:
+#line 344 "dtc-parser.y" /* yacc.c:1646 */
{
if ((yyvsp[-1].array).bits < 64) {
uint64_t mask = (1ULL << (yyvsp[-1].array).bits) - 1;
(yyval.array).data = data_append_integer((yyvsp[-1].array).data, (yyvsp[0].integer), (yyvsp[-1].array).bits);
}
-#line 1803 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1823 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 36:
-#line 349 "dtc-parser.y" /* yacc.c:1646 */
+ case 37:
+#line 363 "dtc-parser.y" /* yacc.c:1646 */
{
uint64_t val = ~0ULL >> (64 - (yyvsp[-1].array).bits);
(yyval.array).data = data_append_integer((yyvsp[-1].array).data, val, (yyvsp[-1].array).bits);
}
-#line 1821 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1841 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 37:
-#line 363 "dtc-parser.y" /* yacc.c:1646 */
+ case 38:
+#line 377 "dtc-parser.y" /* yacc.c:1646 */
{
(yyval.array).data = data_add_marker((yyvsp[-1].array).data, LABEL, (yyvsp[0].labelref));
}
-#line 1829 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1849 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 40:
-#line 372 "dtc-parser.y" /* yacc.c:1646 */
+ case 41:
+#line 386 "dtc-parser.y" /* yacc.c:1646 */
{
(yyval.integer) = (yyvsp[-1].integer);
}
-#line 1837 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1857 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 43:
-#line 383 "dtc-parser.y" /* yacc.c:1646 */
+ case 44:
+#line 397 "dtc-parser.y" /* yacc.c:1646 */
{ (yyval.integer) = (yyvsp[-4].integer) ? (yyvsp[-2].integer) : (yyvsp[0].integer); }
-#line 1843 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1863 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 45:
-#line 388 "dtc-parser.y" /* yacc.c:1646 */
+ case 46:
+#line 402 "dtc-parser.y" /* yacc.c:1646 */
{ (yyval.integer) = (yyvsp[-2].integer) || (yyvsp[0].integer); }
-#line 1849 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1869 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 47:
-#line 393 "dtc-parser.y" /* yacc.c:1646 */
+ case 48:
+#line 407 "dtc-parser.y" /* yacc.c:1646 */
{ (yyval.integer) = (yyvsp[-2].integer) && (yyvsp[0].integer); }
-#line 1855 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1875 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 49:
-#line 398 "dtc-parser.y" /* yacc.c:1646 */
+ case 50:
+#line 412 "dtc-parser.y" /* yacc.c:1646 */
{ (yyval.integer) = (yyvsp[-2].integer) | (yyvsp[0].integer); }
-#line 1861 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1881 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 51:
-#line 403 "dtc-parser.y" /* yacc.c:1646 */
+ case 52:
+#line 417 "dtc-parser.y" /* yacc.c:1646 */
{ (yyval.integer) = (yyvsp[-2].integer) ^ (yyvsp[0].integer); }
-#line 1867 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1887 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 53:
-#line 408 "dtc-parser.y" /* yacc.c:1646 */
+ case 54:
+#line 422 "dtc-parser.y" /* yacc.c:1646 */
{ (yyval.integer) = (yyvsp[-2].integer) & (yyvsp[0].integer); }
-#line 1873 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1893 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 55:
-#line 413 "dtc-parser.y" /* yacc.c:1646 */
+ case 56:
+#line 427 "dtc-parser.y" /* yacc.c:1646 */
{ (yyval.integer) = (yyvsp[-2].integer) == (yyvsp[0].integer); }
-#line 1879 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1899 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 56:
-#line 414 "dtc-parser.y" /* yacc.c:1646 */
+ case 57:
+#line 428 "dtc-parser.y" /* yacc.c:1646 */
{ (yyval.integer) = (yyvsp[-2].integer) != (yyvsp[0].integer); }
-#line 1885 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1905 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 58:
-#line 419 "dtc-parser.y" /* yacc.c:1646 */
+ case 59:
+#line 433 "dtc-parser.y" /* yacc.c:1646 */
{ (yyval.integer) = (yyvsp[-2].integer) < (yyvsp[0].integer); }
-#line 1891 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1911 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 59:
-#line 420 "dtc-parser.y" /* yacc.c:1646 */
+ case 60:
+#line 434 "dtc-parser.y" /* yacc.c:1646 */
{ (yyval.integer) = (yyvsp[-2].integer) > (yyvsp[0].integer); }
-#line 1897 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1917 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 60:
-#line 421 "dtc-parser.y" /* yacc.c:1646 */
+ case 61:
+#line 435 "dtc-parser.y" /* yacc.c:1646 */
{ (yyval.integer) = (yyvsp[-2].integer) <= (yyvsp[0].integer); }
-#line 1903 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1923 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 61:
-#line 422 "dtc-parser.y" /* yacc.c:1646 */
+ case 62:
+#line 436 "dtc-parser.y" /* yacc.c:1646 */
{ (yyval.integer) = (yyvsp[-2].integer) >= (yyvsp[0].integer); }
-#line 1909 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1929 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 62:
-#line 426 "dtc-parser.y" /* yacc.c:1646 */
+ case 63:
+#line 440 "dtc-parser.y" /* yacc.c:1646 */
{ (yyval.integer) = (yyvsp[-2].integer) << (yyvsp[0].integer); }
-#line 1915 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1935 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 63:
-#line 427 "dtc-parser.y" /* yacc.c:1646 */
+ case 64:
+#line 441 "dtc-parser.y" /* yacc.c:1646 */
{ (yyval.integer) = (yyvsp[-2].integer) >> (yyvsp[0].integer); }
-#line 1921 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1941 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 65:
-#line 432 "dtc-parser.y" /* yacc.c:1646 */
+ case 66:
+#line 446 "dtc-parser.y" /* yacc.c:1646 */
{ (yyval.integer) = (yyvsp[-2].integer) + (yyvsp[0].integer); }
-#line 1927 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1947 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 66:
-#line 433 "dtc-parser.y" /* yacc.c:1646 */
+ case 67:
+#line 447 "dtc-parser.y" /* yacc.c:1646 */
{ (yyval.integer) = (yyvsp[-2].integer) - (yyvsp[0].integer); }
-#line 1933 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1953 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 68:
-#line 438 "dtc-parser.y" /* yacc.c:1646 */
+ case 69:
+#line 452 "dtc-parser.y" /* yacc.c:1646 */
{ (yyval.integer) = (yyvsp[-2].integer) * (yyvsp[0].integer); }
-#line 1939 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1959 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 69:
-#line 440 "dtc-parser.y" /* yacc.c:1646 */
+ case 70:
+#line 454 "dtc-parser.y" /* yacc.c:1646 */
{
if ((yyvsp[0].integer) != 0) {
(yyval.integer) = (yyvsp[-2].integer) / (yyvsp[0].integer);
(yyval.integer) = 0;
}
}
-#line 1952 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1972 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 70:
-#line 449 "dtc-parser.y" /* yacc.c:1646 */
+ case 71:
+#line 463 "dtc-parser.y" /* yacc.c:1646 */
{
if ((yyvsp[0].integer) != 0) {
(yyval.integer) = (yyvsp[-2].integer) % (yyvsp[0].integer);
(yyval.integer) = 0;
}
}
-#line 1965 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1985 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 73:
-#line 462 "dtc-parser.y" /* yacc.c:1646 */
+ case 74:
+#line 476 "dtc-parser.y" /* yacc.c:1646 */
{ (yyval.integer) = -(yyvsp[0].integer); }
-#line 1971 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1991 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 74:
-#line 463 "dtc-parser.y" /* yacc.c:1646 */
+ case 75:
+#line 477 "dtc-parser.y" /* yacc.c:1646 */
{ (yyval.integer) = ~(yyvsp[0].integer); }
-#line 1977 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 1997 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 75:
-#line 464 "dtc-parser.y" /* yacc.c:1646 */
+ case 76:
+#line 478 "dtc-parser.y" /* yacc.c:1646 */
{ (yyval.integer) = !(yyvsp[0].integer); }
-#line 1983 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 2003 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 76:
-#line 469 "dtc-parser.y" /* yacc.c:1646 */
+ case 77:
+#line 483 "dtc-parser.y" /* yacc.c:1646 */
{
(yyval.data) = empty_data;
}
-#line 1991 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 2011 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 77:
-#line 473 "dtc-parser.y" /* yacc.c:1646 */
+ case 78:
+#line 487 "dtc-parser.y" /* yacc.c:1646 */
{
(yyval.data) = data_append_byte((yyvsp[-1].data), (yyvsp[0].byte));
}
-#line 1999 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 2019 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 78:
-#line 477 "dtc-parser.y" /* yacc.c:1646 */
+ case 79:
+#line 491 "dtc-parser.y" /* yacc.c:1646 */
{
(yyval.data) = data_add_marker((yyvsp[-1].data), LABEL, (yyvsp[0].labelref));
}
-#line 2007 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 2027 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 79:
-#line 484 "dtc-parser.y" /* yacc.c:1646 */
+ case 80:
+#line 498 "dtc-parser.y" /* yacc.c:1646 */
{
(yyval.nodelist) = NULL;
}
-#line 2015 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 2035 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 80:
-#line 488 "dtc-parser.y" /* yacc.c:1646 */
+ case 81:
+#line 502 "dtc-parser.y" /* yacc.c:1646 */
{
(yyval.nodelist) = chain_node((yyvsp[-1].node), (yyvsp[0].nodelist));
}
-#line 2023 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 2043 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 81:
-#line 492 "dtc-parser.y" /* yacc.c:1646 */
+ case 82:
+#line 506 "dtc-parser.y" /* yacc.c:1646 */
{
ERROR(&(yylsp[0]), "Properties must precede subnodes");
YYERROR;
}
-#line 2032 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 2052 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 82:
-#line 500 "dtc-parser.y" /* yacc.c:1646 */
+ case 83:
+#line 514 "dtc-parser.y" /* yacc.c:1646 */
{
(yyval.node) = name_node((yyvsp[0].node), (yyvsp[-1].propnodename));
}
-#line 2040 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 2060 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 83:
-#line 504 "dtc-parser.y" /* yacc.c:1646 */
+ case 84:
+#line 518 "dtc-parser.y" /* yacc.c:1646 */
{
(yyval.node) = name_node(build_node_delete(), (yyvsp[-1].propnodename));
}
-#line 2048 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 2068 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
- case 84:
-#line 508 "dtc-parser.y" /* yacc.c:1646 */
+ case 85:
+#line 522 "dtc-parser.y" /* yacc.c:1646 */
{
add_label(&(yyvsp[0].node)->labels, (yyvsp[-1].labelref));
(yyval.node) = (yyvsp[0].node);
}
-#line 2057 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 2077 "dtc-parser.tab.c" /* yacc.c:1646 */
break;
-#line 2061 "dtc-parser.tab.c" /* yacc.c:1646 */
+#line 2081 "dtc-parser.tab.c" /* yacc.c:1646 */
default: break;
}
/* User semantic actions sometimes alter yychar, and that requires
#endif
return yyresult;
}
-#line 514 "dtc-parser.y" /* yacc.c:1906 */
+#line 528 "dtc-parser.y" /* yacc.c:1906 */
void yyerror(char const *s)
-/* A Bison parser, made by GNU Bison 3.0.2. */
+/* A Bison parser, made by GNU Bison 3.0.4. */
/* Bison interface for Yacc-like parsers in C
- Copyright (C) 1984, 1989-1990, 2000-2013 Free Software Foundation, Inc.
+ Copyright (C) 1984, 1989-1990, 2000-2015 Free Software Foundation, Inc.
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
/* Value type. */
#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
-typedef union YYSTYPE YYSTYPE;
+
union YYSTYPE
{
#line 39 "dtc-parser.y" /* yacc.c:1909 */
#line 99 "dtc-parser.tab.h" /* yacc.c:1909 */
};
+
+typedef union YYSTYPE YYSTYPE;
# define YYSTYPE_IS_TRIVIAL 1
# define YYSTYPE_IS_DECLARED 1
#endif
{
struct node *target = get_node_by_ref($1, $2);
- if (target)
+ if (target) {
merge_nodes(target, $3);
- else
- ERROR(&@2, "Label or path %s not found", $2);
+ } else {
+ /*
+ * We rely on the rule being always:
+ * versioninfo plugindecl memreserves devicetree
+ * so $-1 is what we want (plugindecl)
+ */
+ if ($<flags>-1 & DTSF_PLUGIN)
+ add_orphan_node($1, $3, $2);
+ else
+ ERROR(&@2, "Label or path %s not found", $2);
+ }
$$ = $1;
}
| devicetree DT_DEL_NODE DT_REF ';'
$$ = $1;
}
+ | /* empty */
+ {
+ /* build empty node */
+ $$ = name_node(build_node(NULL, NULL), "");
+ }
;
nodedef:
struct node *name_node(struct node *node, char *name);
struct node *chain_node(struct node *first, struct node *list);
struct node *merge_nodes(struct node *old_node, struct node *new_node);
+void add_orphan_node(struct node *old_node, struct node *new_node, char *ref);
void add_property(struct node *node, struct property *prop);
void delete_property_by_name(struct node *node, char *name);
const char *get_unitname(struct node *node);
struct property *get_property(struct node *node, const char *propname);
cell_t propval_cell(struct property *prop);
+cell_t propval_cell_n(struct property *prop, int n);
struct property *get_property_by_label(struct node *tree, const char *label,
struct node **node);
struct marker *get_marker_label(struct node *tree, const char *label,
--- /dev/null
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2014 David Gibson <david@gibson.dropbear.id.au>
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+int fdt_address_cells(const void *fdt, int nodeoffset)
+{
+ const fdt32_t *ac;
+ int val;
+ int len;
+
+ ac = fdt_getprop(fdt, nodeoffset, "#address-cells", &len);
+ if (!ac)
+ return 2;
+
+ if (len != sizeof(*ac))
+ return -FDT_ERR_BADNCELLS;
+
+ val = fdt32_to_cpu(*ac);
+ if ((val <= 0) || (val > FDT_MAX_NCELLS))
+ return -FDT_ERR_BADNCELLS;
+
+ return val;
+}
+
+int fdt_size_cells(const void *fdt, int nodeoffset)
+{
+ const fdt32_t *sc;
+ int val;
+ int len;
+
+ sc = fdt_getprop(fdt, nodeoffset, "#size-cells", &len);
+ if (!sc)
+ return 2;
+
+ if (len != sizeof(*sc))
+ return -FDT_ERR_BADNCELLS;
+
+ val = fdt32_to_cpu(*sc);
+ if ((val < 0) || (val > FDT_MAX_NCELLS))
+ return -FDT_ERR_BADNCELLS;
+
+ return val;
+}
--- /dev/null
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+/**
+ * overlay_get_target_phandle - retrieves the target phandle of a fragment
+ * @fdto: pointer to the device tree overlay blob
+ * @fragment: node offset of the fragment in the overlay
+ *
+ * overlay_get_target_phandle() retrieves the target phandle of an
+ * overlay fragment when that fragment uses a phandle (target
+ * property) instead of a path (target-path property).
+ *
+ * returns:
+ * the phandle pointed by the target property
+ * 0, if the phandle was not found
+ * -1, if the phandle was malformed
+ */
+static uint32_t overlay_get_target_phandle(const void *fdto, int fragment)
+{
+ const fdt32_t *val;
+ int len;
+
+ val = fdt_getprop(fdto, fragment, "target", &len);
+ if (!val)
+ return 0;
+
+ if ((len != sizeof(*val)) || (fdt32_to_cpu(*val) == (uint32_t)-1))
+ return (uint32_t)-1;
+
+ return fdt32_to_cpu(*val);
+}
+
+/**
+ * overlay_get_target - retrieves the offset of a fragment's target
+ * @fdt: Base device tree blob
+ * @fdto: Device tree overlay blob
+ * @fragment: node offset of the fragment in the overlay
+ * @pathp: pointer which receives the path of the target (or NULL)
+ *
+ * overlay_get_target() retrieves the target offset in the base
+ * device tree of a fragment, no matter how the actual targetting is
+ * done (through a phandle or a path)
+ *
+ * returns:
+ * the targetted node offset in the base device tree
+ * Negative error code on error
+ */
+static int overlay_get_target(const void *fdt, const void *fdto,
+ int fragment, char const **pathp)
+{
+ uint32_t phandle;
+ const char *path = NULL;
+ int path_len = 0, ret;
+
+ /* Try first to do a phandle based lookup */
+ phandle = overlay_get_target_phandle(fdto, fragment);
+ if (phandle == (uint32_t)-1)
+ return -FDT_ERR_BADPHANDLE;
+
+ /* no phandle, try path */
+ if (!phandle) {
+ /* And then a path based lookup */
+ path = fdt_getprop(fdto, fragment, "target-path", &path_len);
+ if (path)
+ ret = fdt_path_offset(fdt, path);
+ else
+ ret = path_len;
+ } else
+ ret = fdt_node_offset_by_phandle(fdt, phandle);
+
+ /*
+ * If we haven't found either a target or a
+ * target-path property in a node that contains a
+ * __overlay__ subnode (we wouldn't be called
+ * otherwise), consider it a improperly written
+ * overlay
+ */
+ if (ret < 0 && path_len == -FDT_ERR_NOTFOUND)
+ ret = -FDT_ERR_BADOVERLAY;
+
+ /* return on error */
+ if (ret < 0)
+ return ret;
+
+ /* return pointer to path (if available) */
+ if (pathp)
+ *pathp = path ? path : NULL;
+
+ return ret;
+}
+
+/**
+ * overlay_phandle_add_offset - Increases a phandle by an offset
+ * @fdt: Base device tree blob
+ * @node: Device tree overlay blob
+ * @name: Name of the property to modify (phandle or linux,phandle)
+ * @delta: offset to apply
+ *
+ * overlay_phandle_add_offset() increments a node phandle by a given
+ * offset.
+ *
+ * returns:
+ * 0 on success.
+ * Negative error code on error
+ */
+static int overlay_phandle_add_offset(void *fdt, int node,
+ const char *name, uint32_t delta)
+{
+ const fdt32_t *val;
+ uint32_t adj_val;
+ int len;
+
+ val = fdt_getprop(fdt, node, name, &len);
+ if (!val)
+ return len;
+
+ if (len != sizeof(*val))
+ return -FDT_ERR_BADPHANDLE;
+
+ adj_val = fdt32_to_cpu(*val);
+ if ((adj_val + delta) < adj_val)
+ return -FDT_ERR_NOPHANDLES;
+
+ adj_val += delta;
+ if (adj_val == (uint32_t)-1)
+ return -FDT_ERR_NOPHANDLES;
+
+ return fdt_setprop_inplace_u32(fdt, node, name, adj_val);
+}
+
+/**
+ * overlay_adjust_node_phandles - Offsets the phandles of a node
+ * @fdto: Device tree overlay blob
+ * @node: Offset of the node we want to adjust
+ * @delta: Offset to shift the phandles of
+ *
+ * overlay_adjust_node_phandles() adds a constant to all the phandles
+ * of a given node. This is mainly use as part of the overlay
+ * application process, when we want to update all the overlay
+ * phandles to not conflict with the overlays of the base device tree.
+ *
+ * returns:
+ * 0 on success
+ * Negative error code on failure
+ */
+static int overlay_adjust_node_phandles(void *fdto, int node,
+ uint32_t delta)
+{
+ int child;
+ int ret;
+
+ ret = overlay_phandle_add_offset(fdto, node, "phandle", delta);
+ if (ret && ret != -FDT_ERR_NOTFOUND)
+ return ret;
+
+ ret = overlay_phandle_add_offset(fdto, node, "linux,phandle", delta);
+ if (ret && ret != -FDT_ERR_NOTFOUND)
+ return ret;
+
+ fdt_for_each_subnode(child, fdto, node) {
+ ret = overlay_adjust_node_phandles(fdto, child, delta);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * overlay_adjust_local_phandles - Adjust the phandles of a whole overlay
+ * @fdto: Device tree overlay blob
+ * @delta: Offset to shift the phandles of
+ *
+ * overlay_adjust_local_phandles() adds a constant to all the
+ * phandles of an overlay. This is mainly use as part of the overlay
+ * application process, when we want to update all the overlay
+ * phandles to not conflict with the overlays of the base device tree.
+ *
+ * returns:
+ * 0 on success
+ * Negative error code on failure
+ */
+static int overlay_adjust_local_phandles(void *fdto, uint32_t delta)
+{
+ /*
+ * Start adjusting the phandles from the overlay root
+ */
+ return overlay_adjust_node_phandles(fdto, 0, delta);
+}
+
+/**
+ * overlay_update_local_node_references - Adjust the overlay references
+ * @fdto: Device tree overlay blob
+ * @tree_node: Node offset of the node to operate on
+ * @fixup_node: Node offset of the matching local fixups node
+ * @delta: Offset to shift the phandles of
+ *
+ * overlay_update_local_nodes_references() update the phandles
+ * pointing to a node within the device tree overlay by adding a
+ * constant delta.
+ *
+ * This is mainly used as part of a device tree application process,
+ * where you want the device tree overlays phandles to not conflict
+ * with the ones from the base device tree before merging them.
+ *
+ * returns:
+ * 0 on success
+ * Negative error code on failure
+ */
+static int overlay_update_local_node_references(void *fdto,
+ int tree_node,
+ int fixup_node,
+ uint32_t delta)
+{
+ int fixup_prop;
+ int fixup_child;
+ int ret;
+
+ fdt_for_each_property_offset(fixup_prop, fdto, fixup_node) {
+ const fdt32_t *fixup_val;
+ const char *tree_val;
+ const char *name;
+ int fixup_len;
+ int tree_len;
+ int i;
+
+ fixup_val = fdt_getprop_by_offset(fdto, fixup_prop,
+ &name, &fixup_len);
+ if (!fixup_val)
+ return fixup_len;
+
+ if (fixup_len % sizeof(uint32_t))
+ return -FDT_ERR_BADOVERLAY;
+
+ tree_val = fdt_getprop(fdto, tree_node, name, &tree_len);
+ if (!tree_val) {
+ if (tree_len == -FDT_ERR_NOTFOUND)
+ return -FDT_ERR_BADOVERLAY;
+
+ return tree_len;
+ }
+
+ for (i = 0; i < (fixup_len / sizeof(uint32_t)); i++) {
+ fdt32_t adj_val;
+ uint32_t poffset;
+
+ poffset = fdt32_to_cpu(fixup_val[i]);
+
+ /*
+ * phandles to fixup can be unaligned.
+ *
+ * Use a memcpy for the architectures that do
+ * not support unaligned accesses.
+ */
+ memcpy(&adj_val, tree_val + poffset, sizeof(adj_val));
+
+ adj_val = cpu_to_fdt32(fdt32_to_cpu(adj_val) + delta);
+
+ ret = fdt_setprop_inplace_namelen_partial(fdto,
+ tree_node,
+ name,
+ strlen(name),
+ poffset,
+ &adj_val,
+ sizeof(adj_val));
+ if (ret == -FDT_ERR_NOSPACE)
+ return -FDT_ERR_BADOVERLAY;
+
+ if (ret)
+ return ret;
+ }
+ }
+
+ fdt_for_each_subnode(fixup_child, fdto, fixup_node) {
+ const char *fixup_child_name = fdt_get_name(fdto, fixup_child,
+ NULL);
+ int tree_child;
+
+ tree_child = fdt_subnode_offset(fdto, tree_node,
+ fixup_child_name);
+ if (tree_child == -FDT_ERR_NOTFOUND)
+ return -FDT_ERR_BADOVERLAY;
+ if (tree_child < 0)
+ return tree_child;
+
+ ret = overlay_update_local_node_references(fdto,
+ tree_child,
+ fixup_child,
+ delta);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * overlay_update_local_references - Adjust the overlay references
+ * @fdto: Device tree overlay blob
+ * @delta: Offset to shift the phandles of
+ *
+ * overlay_update_local_references() update all the phandles pointing
+ * to a node within the device tree overlay by adding a constant
+ * delta to not conflict with the base overlay.
+ *
+ * This is mainly used as part of a device tree application process,
+ * where you want the device tree overlays phandles to not conflict
+ * with the ones from the base device tree before merging them.
+ *
+ * returns:
+ * 0 on success
+ * Negative error code on failure
+ */
+static int overlay_update_local_references(void *fdto, uint32_t delta)
+{
+ int fixups;
+
+ fixups = fdt_path_offset(fdto, "/__local_fixups__");
+ if (fixups < 0) {
+ /* There's no local phandles to adjust, bail out */
+ if (fixups == -FDT_ERR_NOTFOUND)
+ return 0;
+
+ return fixups;
+ }
+
+ /*
+ * Update our local references from the root of the tree
+ */
+ return overlay_update_local_node_references(fdto, 0, fixups,
+ delta);
+}
+
+/**
+ * overlay_fixup_one_phandle - Set an overlay phandle to the base one
+ * @fdt: Base Device Tree blob
+ * @fdto: Device tree overlay blob
+ * @symbols_off: Node offset of the symbols node in the base device tree
+ * @path: Path to a node holding a phandle in the overlay
+ * @path_len: number of path characters to consider
+ * @name: Name of the property holding the phandle reference in the overlay
+ * @name_len: number of name characters to consider
+ * @poffset: Offset within the overlay property where the phandle is stored
+ * @label: Label of the node referenced by the phandle
+ *
+ * overlay_fixup_one_phandle() resolves an overlay phandle pointing to
+ * a node in the base device tree.
+ *
+ * This is part of the device tree overlay application process, when
+ * you want all the phandles in the overlay to point to the actual
+ * base dt nodes.
+ *
+ * returns:
+ * 0 on success
+ * Negative error code on failure
+ */
+static int overlay_fixup_one_phandle(void *fdt, void *fdto,
+ int symbols_off,
+ const char *path, uint32_t path_len,
+ const char *name, uint32_t name_len,
+ int poffset, const char *label)
+{
+ const char *symbol_path;
+ uint32_t phandle;
+ fdt32_t phandle_prop;
+ int symbol_off, fixup_off;
+ int prop_len;
+
+ if (symbols_off < 0)
+ return symbols_off;
+
+ symbol_path = fdt_getprop(fdt, symbols_off, label,
+ &prop_len);
+ if (!symbol_path)
+ return prop_len;
+
+ symbol_off = fdt_path_offset(fdt, symbol_path);
+ if (symbol_off < 0)
+ return symbol_off;
+
+ phandle = fdt_get_phandle(fdt, symbol_off);
+ if (!phandle)
+ return -FDT_ERR_NOTFOUND;
+
+ fixup_off = fdt_path_offset_namelen(fdto, path, path_len);
+ if (fixup_off == -FDT_ERR_NOTFOUND)
+ return -FDT_ERR_BADOVERLAY;
+ if (fixup_off < 0)
+ return fixup_off;
+
+ phandle_prop = cpu_to_fdt32(phandle);
+ return fdt_setprop_inplace_namelen_partial(fdto, fixup_off,
+ name, name_len, poffset,
+ &phandle_prop,
+ sizeof(phandle_prop));
+};
+
+/**
+ * overlay_fixup_phandle - Set an overlay phandle to the base one
+ * @fdt: Base Device Tree blob
+ * @fdto: Device tree overlay blob
+ * @symbols_off: Node offset of the symbols node in the base device tree
+ * @property: Property offset in the overlay holding the list of fixups
+ *
+ * overlay_fixup_phandle() resolves all the overlay phandles pointed
+ * to in a __fixups__ property, and updates them to match the phandles
+ * in use in the base device tree.
+ *
+ * This is part of the device tree overlay application process, when
+ * you want all the phandles in the overlay to point to the actual
+ * base dt nodes.
+ *
+ * returns:
+ * 0 on success
+ * Negative error code on failure
+ */
+static int overlay_fixup_phandle(void *fdt, void *fdto, int symbols_off,
+ int property)
+{
+ const char *value;
+ const char *label;
+ int len;
+
+ value = fdt_getprop_by_offset(fdto, property,
+ &label, &len);
+ if (!value) {
+ if (len == -FDT_ERR_NOTFOUND)
+ return -FDT_ERR_INTERNAL;
+
+ return len;
+ }
+
+ do {
+ const char *path, *name, *fixup_end;
+ const char *fixup_str = value;
+ uint32_t path_len, name_len;
+ uint32_t fixup_len;
+ char *sep, *endptr;
+ int poffset, ret;
+
+ fixup_end = memchr(value, '\0', len);
+ if (!fixup_end)
+ return -FDT_ERR_BADOVERLAY;
+ fixup_len = fixup_end - fixup_str;
+
+ len -= fixup_len + 1;
+ value += fixup_len + 1;
+
+ path = fixup_str;
+ sep = memchr(fixup_str, ':', fixup_len);
+ if (!sep || *sep != ':')
+ return -FDT_ERR_BADOVERLAY;
+
+ path_len = sep - path;
+ if (path_len == (fixup_len - 1))
+ return -FDT_ERR_BADOVERLAY;
+
+ fixup_len -= path_len + 1;
+ name = sep + 1;
+ sep = memchr(name, ':', fixup_len);
+ if (!sep || *sep != ':')
+ return -FDT_ERR_BADOVERLAY;
+
+ name_len = sep - name;
+ if (!name_len)
+ return -FDT_ERR_BADOVERLAY;
+
+ poffset = strtoul(sep + 1, &endptr, 10);
+ if ((*endptr != '\0') || (endptr <= (sep + 1)))
+ return -FDT_ERR_BADOVERLAY;
+
+ ret = overlay_fixup_one_phandle(fdt, fdto, symbols_off,
+ path, path_len, name, name_len,
+ poffset, label);
+ if (ret)
+ return ret;
+ } while (len > 0);
+
+ return 0;
+}
+
+/**
+ * overlay_fixup_phandles - Resolve the overlay phandles to the base
+ * device tree
+ * @fdt: Base Device Tree blob
+ * @fdto: Device tree overlay blob
+ *
+ * overlay_fixup_phandles() resolves all the overlay phandles pointing
+ * to nodes in the base device tree.
+ *
+ * This is one of the steps of the device tree overlay application
+ * process, when you want all the phandles in the overlay to point to
+ * the actual base dt nodes.
+ *
+ * returns:
+ * 0 on success
+ * Negative error code on failure
+ */
+static int overlay_fixup_phandles(void *fdt, void *fdto)
+{
+ int fixups_off, symbols_off;
+ int property;
+
+ /* We can have overlays without any fixups */
+ fixups_off = fdt_path_offset(fdto, "/__fixups__");
+ if (fixups_off == -FDT_ERR_NOTFOUND)
+ return 0; /* nothing to do */
+ if (fixups_off < 0)
+ return fixups_off;
+
+ /* And base DTs without symbols */
+ symbols_off = fdt_path_offset(fdt, "/__symbols__");
+ if ((symbols_off < 0 && (symbols_off != -FDT_ERR_NOTFOUND)))
+ return symbols_off;
+
+ fdt_for_each_property_offset(property, fdto, fixups_off) {
+ int ret;
+
+ ret = overlay_fixup_phandle(fdt, fdto, symbols_off, property);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * overlay_apply_node - Merges a node into the base device tree
+ * @fdt: Base Device Tree blob
+ * @target: Node offset in the base device tree to apply the fragment to
+ * @fdto: Device tree overlay blob
+ * @node: Node offset in the overlay holding the changes to merge
+ *
+ * overlay_apply_node() merges a node into a target base device tree
+ * node pointed.
+ *
+ * This is part of the final step in the device tree overlay
+ * application process, when all the phandles have been adjusted and
+ * resolved and you just have to merge overlay into the base device
+ * tree.
+ *
+ * returns:
+ * 0 on success
+ * Negative error code on failure
+ */
+static int overlay_apply_node(void *fdt, int target,
+ void *fdto, int node)
+{
+ int property;
+ int subnode;
+
+ fdt_for_each_property_offset(property, fdto, node) {
+ const char *name;
+ const void *prop;
+ int prop_len;
+ int ret;
+
+ prop = fdt_getprop_by_offset(fdto, property, &name,
+ &prop_len);
+ if (prop_len == -FDT_ERR_NOTFOUND)
+ return -FDT_ERR_INTERNAL;
+ if (prop_len < 0)
+ return prop_len;
+
+ ret = fdt_setprop(fdt, target, name, prop, prop_len);
+ if (ret)
+ return ret;
+ }
+
+ fdt_for_each_subnode(subnode, fdto, node) {
+ const char *name = fdt_get_name(fdto, subnode, NULL);
+ int nnode;
+ int ret;
+
+ nnode = fdt_add_subnode(fdt, target, name);
+ if (nnode == -FDT_ERR_EXISTS) {
+ nnode = fdt_subnode_offset(fdt, target, name);
+ if (nnode == -FDT_ERR_NOTFOUND)
+ return -FDT_ERR_INTERNAL;
+ }
+
+ if (nnode < 0)
+ return nnode;
+
+ ret = overlay_apply_node(fdt, nnode, fdto, subnode);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * overlay_merge - Merge an overlay into its base device tree
+ * @fdt: Base Device Tree blob
+ * @fdto: Device tree overlay blob
+ *
+ * overlay_merge() merges an overlay into its base device tree.
+ *
+ * This is the next to last step in the device tree overlay application
+ * process, when all the phandles have been adjusted and resolved and
+ * you just have to merge overlay into the base device tree.
+ *
+ * returns:
+ * 0 on success
+ * Negative error code on failure
+ */
+static int overlay_merge(void *fdt, void *fdto)
+{
+ int fragment;
+
+ fdt_for_each_subnode(fragment, fdto, 0) {
+ int overlay;
+ int target;
+ int ret;
+
+ /*
+ * Each fragments will have an __overlay__ node. If
+ * they don't, it's not supposed to be merged
+ */
+ overlay = fdt_subnode_offset(fdto, fragment, "__overlay__");
+ if (overlay == -FDT_ERR_NOTFOUND)
+ continue;
+
+ if (overlay < 0)
+ return overlay;
+
+ target = overlay_get_target(fdt, fdto, fragment, NULL);
+ if (target < 0)
+ return target;
+
+ ret = overlay_apply_node(fdt, target, fdto, overlay);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int get_path_len(const void *fdt, int nodeoffset)
+{
+ int len = 0, namelen;
+ const char *name;
+
+ FDT_CHECK_HEADER(fdt);
+
+ for (;;) {
+ name = fdt_get_name(fdt, nodeoffset, &namelen);
+ if (!name)
+ return namelen;
+
+ /* root? we're done */
+ if (namelen == 0)
+ break;
+
+ nodeoffset = fdt_parent_offset(fdt, nodeoffset);
+ if (nodeoffset < 0)
+ return nodeoffset;
+ len += namelen + 1;
+ }
+
+ /* in case of root pretend it's "/" */
+ if (len == 0)
+ len++;
+ return len;
+}
+
+/**
+ * overlay_symbol_update - Update the symbols of base tree after a merge
+ * @fdt: Base Device Tree blob
+ * @fdto: Device tree overlay blob
+ *
+ * overlay_symbol_update() updates the symbols of the base tree with the
+ * symbols of the applied overlay
+ *
+ * This is the last step in the device tree overlay application
+ * process, allowing the reference of overlay symbols by subsequent
+ * overlay operations.
+ *
+ * returns:
+ * 0 on success
+ * Negative error code on failure
+ */
+static int overlay_symbol_update(void *fdt, void *fdto)
+{
+ int root_sym, ov_sym, prop, path_len, fragment, target;
+ int len, frag_name_len, ret, rel_path_len;
+ const char *s, *e;
+ const char *path;
+ const char *name;
+ const char *frag_name;
+ const char *rel_path;
+ const char *target_path;
+ char *buf;
+ void *p;
+
+ ov_sym = fdt_subnode_offset(fdto, 0, "__symbols__");
+
+ /* if no overlay symbols exist no problem */
+ if (ov_sym < 0)
+ return 0;
+
+ root_sym = fdt_subnode_offset(fdt, 0, "__symbols__");
+
+ /* it no root symbols exist we should create them */
+ if (root_sym == -FDT_ERR_NOTFOUND)
+ root_sym = fdt_add_subnode(fdt, 0, "__symbols__");
+
+ /* any error is fatal now */
+ if (root_sym < 0)
+ return root_sym;
+
+ /* iterate over each overlay symbol */
+ fdt_for_each_property_offset(prop, fdto, ov_sym) {
+ path = fdt_getprop_by_offset(fdto, prop, &name, &path_len);
+ if (!path)
+ return path_len;
+
+ /* verify it's a string property (terminated by a single \0) */
+ if (path_len < 1 || memchr(path, '\0', path_len) != &path[path_len - 1])
+ return -FDT_ERR_BADVALUE;
+
+ /* keep end marker to avoid strlen() */
+ e = path + path_len;
+
+ /* format: /<fragment-name>/__overlay__/<relative-subnode-path> */
+
+ if (*path != '/')
+ return -FDT_ERR_BADVALUE;
+
+ /* get fragment name first */
+ s = strchr(path + 1, '/');
+ if (!s)
+ return -FDT_ERR_BADOVERLAY;
+
+ frag_name = path + 1;
+ frag_name_len = s - path - 1;
+
+ /* verify format; safe since "s" lies in \0 terminated prop */
+ len = sizeof("/__overlay__/") - 1;
+ if ((e - s) < len || memcmp(s, "/__overlay__/", len))
+ return -FDT_ERR_BADOVERLAY;
+
+ rel_path = s + len;
+ rel_path_len = e - rel_path;
+
+ /* find the fragment index in which the symbol lies */
+ ret = fdt_subnode_offset_namelen(fdto, 0, frag_name,
+ frag_name_len);
+ /* not found? */
+ if (ret < 0)
+ return -FDT_ERR_BADOVERLAY;
+ fragment = ret;
+
+ /* an __overlay__ subnode must exist */
+ ret = fdt_subnode_offset(fdto, fragment, "__overlay__");
+ if (ret < 0)
+ return -FDT_ERR_BADOVERLAY;
+
+ /* get the target of the fragment */
+ ret = overlay_get_target(fdt, fdto, fragment, &target_path);
+ if (ret < 0)
+ return ret;
+ target = ret;
+
+ /* if we have a target path use */
+ if (!target_path) {
+ ret = get_path_len(fdt, target);
+ if (ret < 0)
+ return ret;
+ len = ret;
+ } else {
+ len = strlen(target_path);
+ }
+
+ ret = fdt_setprop_placeholder(fdt, root_sym, name,
+ len + (len > 1) + rel_path_len + 1, &p);
+ if (ret < 0)
+ return ret;
+
+ if (!target_path) {
+ /* again in case setprop_placeholder changed it */
+ ret = overlay_get_target(fdt, fdto, fragment, &target_path);
+ if (ret < 0)
+ return ret;
+ target = ret;
+ }
+
+ buf = p;
+ if (len > 1) { /* target is not root */
+ if (!target_path) {
+ ret = fdt_get_path(fdt, target, buf, len + 1);
+ if (ret < 0)
+ return ret;
+ } else
+ memcpy(buf, target_path, len + 1);
+
+ } else
+ len--;
+
+ buf[len] = '/';
+ memcpy(buf + len + 1, rel_path, rel_path_len);
+ buf[len + 1 + rel_path_len] = '\0';
+ }
+
+ return 0;
+}
+
+int fdt_overlay_apply(void *fdt, void *fdto)
+{
+ uint32_t delta = fdt_get_max_phandle(fdt);
+ int ret;
+
+ FDT_CHECK_HEADER(fdt);
+ FDT_CHECK_HEADER(fdto);
+
+ ret = overlay_adjust_local_phandles(fdto, delta);
+ if (ret)
+ goto err;
+
+ ret = overlay_update_local_references(fdto, delta);
+ if (ret)
+ goto err;
+
+ ret = overlay_fixup_phandles(fdt, fdto);
+ if (ret)
+ goto err;
+
+ ret = overlay_merge(fdt, fdto);
+ if (ret)
+ goto err;
+
+ ret = overlay_symbol_update(fdt, fdto);
+ if (ret)
+ goto err;
+
+ /*
+ * The overlay has been damaged, erase its magic.
+ */
+ fdt_set_magic(fdto, ~0);
+
+ return 0;
+
+err:
+ /*
+ * The overlay might have been damaged, erase its magic.
+ */
+ fdt_set_magic(fdto, ~0);
+
+ /*
+ * The base device tree might have been damaged, erase its
+ * magic.
+ */
+ fdt_set_magic(fdt, ~0);
+
+ return ret;
+}
return old_node;
}
+void add_orphan_node(struct node *dt, struct node *new_node, char *ref)
+{
+ static unsigned int next_orphan_fragment = 0;
+ struct node *node;
+ struct property *p;
+ struct data d = empty_data;
+ char *name;
+
+ d = data_add_marker(d, REF_PHANDLE, ref);
+ d = data_append_integer(d, 0xffffffff, 32);
+
+ p = build_property("target", d);
+
+ xasprintf(&name, "fragment@%u",
+ next_orphan_fragment++);
+ name_node(new_node, "__overlay__");
+ node = build_node(p, new_node);
+ name_node(node, name);
+
+ add_child(dt, node);
+}
+
struct node *chain_node(struct node *first, struct node *list)
{
assert(first->next_sibling == NULL);
return fdt32_to_cpu(*((fdt32_t *)prop->val.val));
}
+cell_t propval_cell_n(struct property *prop, int n)
+{
+ assert(prop->val.len / sizeof(cell_t) >= n);
+ return fdt32_to_cpu(*((fdt32_t *)prop->val.val + n));
+}
+
struct property *get_property_by_label(struct node *tree, const char *label,
struct node **node)
{
--- /dev/null
+/_libfdt.so
+/libfdt.py
+/libfdt.pyc
+/libfdt_wrap.c
--- /dev/null
+# Unfortunately setup.py below cannot handle srctree being ".." which it often
+# is. It fails with an error like:
+# Fatal error: can't create build/temp.linux-x86_64-2.7/../lib/libfdt/fdt.o:
+# No such file or directory
+# To fix this, use an absolute path.
+LIBFDT_srcdir = $(abspath $(srctree)/$(src)/../libfdt)
+
+include $(LIBFDT_srcdir)/Makefile.libfdt
+
+# Unfortunately setup.py (or actually the Python distutil implementation) puts
+# files into the same directory as the .i file. We cannot touch the source
+# directory, so we "ship" .i file into the objtree.
+PYLIBFDT_srcs = $(addprefix $(LIBFDT_srcdir)/,$(LIBFDT_SRCS)) \
+ $(obj)/libfdt.i
+
+quiet_cmd_pymod = PYMOD $@
+ cmd_pymod = unset CC; unset CROSS_COMPILE; unset CFLAGS;\
+ LDFLAGS="$(HOSTLDFLAGS)" \
+ VERSION="u-boot-$(UBOOTVERSION)" \
+ CPPFLAGS="$(HOSTCFLAGS) -I$(LIBFDT_srcdir)" OBJDIR=$(obj) \
+ SOURCES="$(PYLIBFDT_srcs)" \
+ SWIG_OPTS="-I$(LIBFDT_srcdir) -I$(LIBFDT_srcdir)/.." \
+ $(PYTHON) $< --quiet build_ext --inplace
+
+$(obj)/_libfdt.so: $(src)/setup.py $(PYLIBFDT_srcs) FORCE
+ $(call if_changed,pymod)
+
+always += _libfdt.so
+
+clean-files += libfdt.i _libfdt.so libfdt.py libfdt_wrap.c
--- /dev/null
+/*
+ * pylibfdt - Flat Device Tree manipulation in Python
+ * Copyright (C) 2017 Google, Inc.
+ * Written by Simon Glass <sjg@chromium.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause
+ */
+
+%module libfdt
+
+%include <stdint.i>
+
+%{
+#define SWIG_FILE_WITH_INIT
+#include "libfdt.h"
+%}
+
+%pythoncode %{
+
+import struct
+
+# Error codes, corresponding to FDT_ERR_... in libfdt.h
+(NOTFOUND,
+ EXISTS,
+ NOSPACE,
+ BADOFFSET,
+ BADPATH,
+ BADPHANDLE,
+ BADSTATE,
+ TRUNCATED,
+ BADMAGIC,
+ BADVERSION,
+ BADSTRUCTURE,
+ BADLAYOUT,
+ INTERNAL,
+ BADNCELLS,
+ BADVALUE,
+ BADOVERLAY,
+ NOPHANDLES) = QUIET_ALL = range(1, 18)
+# QUIET_ALL can be passed as the 'quiet' parameter to avoid exceptions
+# altogether. All # functions passed this value will return an error instead
+# of raising an exception.
+
+# Pass this as the 'quiet' parameter to return -ENOTFOUND on NOTFOUND errors,
+# instead of raising an exception.
+QUIET_NOTFOUND = (NOTFOUND,)
+
+
+class FdtException(Exception):
+ """An exception caused by an error such as one of the codes above"""
+ def __init__(self, err):
+ self.err = err
+
+ def __str__(self):
+ return 'pylibfdt error %d: %s' % (self.err, fdt_strerror(self.err))
+
+def strerror(fdt_err):
+ """Get the string for an error number
+
+ Args:
+ fdt_err: Error number (-ve)
+
+ Returns:
+ String containing the associated error
+ """
+ return fdt_strerror(fdt_err)
+
+def check_err(val, quiet=()):
+ """Raise an error if the return value is -ve
+
+ This is used to check for errors returned by libfdt C functions.
+
+ Args:
+ val: Return value from a libfdt function
+ quiet: Errors to ignore (empty to raise on all errors)
+
+ Returns:
+ val if val >= 0
+
+ Raises
+ FdtException if val < 0
+ """
+ if val < 0:
+ if -val not in quiet:
+ raise FdtException(val)
+ return val
+
+def check_err_null(val, quiet=()):
+ """Raise an error if the return value is NULL
+
+ This is used to check for a NULL return value from certain libfdt C
+ functions
+
+ Args:
+ val: Return value from a libfdt function
+ quiet: Errors to ignore (empty to raise on all errors)
+
+ Returns:
+ val if val is a list, None if not
+
+ Raises
+ FdtException if val indicates an error was reported and the error
+ is not in @quiet.
+ """
+ # Normally a list is returned which contains the data and its length.
+ # If we get just an integer error code, it means the function failed.
+ if not isinstance(val, list):
+ if -val not in quiet:
+ raise FdtException(val)
+ return val
+
+class Fdt:
+ """Device tree class, supporting all operations
+
+ The Fdt object is created is created from a device tree binary file,
+ e.g. with something like:
+
+ fdt = Fdt(open("filename.dtb").read())
+
+ Operations can then be performed using the methods in this class. Each
+ method xxx(args...) corresponds to a libfdt function fdt_xxx(fdt, args...).
+
+ All methods raise an FdtException if an error occurs. To avoid this
+ behaviour a 'quiet' parameter is provided for some functions. This
+ defaults to empty, but you can pass a list of errors that you expect.
+ If one of these errors occurs, the function will return an error number
+ (e.g. -NOTFOUND).
+ """
+ def __init__(self, data):
+ self._fdt = bytearray(data)
+ check_err(fdt_check_header(self._fdt));
+
+ def subnode_offset(self, parentoffset, name, quiet=()):
+ """Get the offset of a named subnode
+
+ Args:
+ parentoffset: Offset of the parent node to check
+ name: Name of the required subnode, e.g. 'subnode@1'
+ quiet: Errors to ignore (empty to raise on all errors)
+
+ Returns:
+ The node offset of the found node, if any
+
+ Raises
+ FdtException if there is no node with that name, or other error
+ """
+ return check_err(fdt_subnode_offset(self._fdt, parentoffset, name),
+ quiet)
+
+ def path_offset(self, path, quiet=()):
+ """Get the offset for a given path
+
+ Args:
+ path: Path to the required node, e.g. '/node@3/subnode@1'
+ quiet: Errors to ignore (empty to raise on all errors)
+
+ Returns:
+ Node offset
+
+ Raises
+ FdtException if the path is not valid or not found
+ """
+ return check_err(fdt_path_offset(self._fdt, path), quiet)
+
+ def first_property_offset(self, nodeoffset, quiet=()):
+ """Get the offset of the first property in a node offset
+
+ Args:
+ nodeoffset: Offset to the node to check
+ quiet: Errors to ignore (empty to raise on all errors)
+
+ Returns:
+ Offset of the first property
+
+ Raises
+ FdtException if the associated node has no properties, or some
+ other error occurred
+ """
+ return check_err(fdt_first_property_offset(self._fdt, nodeoffset),
+ quiet)
+
+ def next_property_offset(self, prop_offset, quiet=()):
+ """Get the next property in a node
+
+ Args:
+ prop_offset: Offset of the previous property
+ quiet: Errors to ignore (empty to raise on all errors)
+
+ Returns:
+ Offset of the next property
+
+ Raises:
+ FdtException if the associated node has no more properties, or
+ some other error occurred
+ """
+ return check_err(fdt_next_property_offset(self._fdt, prop_offset),
+ quiet)
+
+ def get_name(self, nodeoffset):
+ """Get the name of a node
+
+ Args:
+ nodeoffset: Offset of node to check
+
+ Returns:
+ Node name
+
+ Raises:
+ FdtException on error (e.g. nodeoffset is invalid)
+ """
+ return check_err_null(fdt_get_name(self._fdt, nodeoffset))[0]
+
+ def get_property_by_offset(self, prop_offset, quiet=()):
+ """Obtains a property that can be examined
+
+ Args:
+ prop_offset: Offset of property (e.g. from first_property_offset())
+ quiet: Errors to ignore (empty to raise on all errors)
+
+ Returns:
+ Property object, or None if not found
+
+ Raises:
+ FdtException on error (e.g. invalid prop_offset or device
+ tree format)
+ """
+ pdata = check_err_null(
+ fdt_get_property_by_offset(self._fdt, prop_offset), quiet)
+ if isinstance(pdata, (int)):
+ return pdata
+ return Property(pdata[0], pdata[1])
+
+ def first_subnode(self, nodeoffset, quiet=()):
+ """Find the first subnode of a parent node
+
+ Args:
+ nodeoffset: Node offset of parent node
+ quiet: Errors to ignore (empty to raise on all errors)
+
+ Returns:
+ The offset of the first subnode, if any
+
+ Raises:
+ FdtException if no subnode found or other error occurs
+ """
+ return check_err(fdt_first_subnode(self._fdt, nodeoffset), quiet)
+
+ def next_subnode(self, nodeoffset, quiet=()):
+ """Find the next subnode
+
+ Args:
+ nodeoffset: Node offset of previous subnode
+ quiet: Errors to ignore (empty to raise on all errors)
+
+ Returns:
+ The offset of the next subnode, if any
+
+ Raises:
+ FdtException if no more subnode found or other error occurs
+ """
+ return check_err(fdt_next_subnode(self._fdt, nodeoffset), quiet)
+
+ def totalsize(self):
+ """Return the total size of the device tree
+
+ Returns:
+ Total tree size in bytes
+ """
+ return check_err(fdt_totalsize(self._fdt))
+
+ def off_dt_struct(self):
+ """Return the start of the device tree struct area
+
+ Returns:
+ Start offset of struct area
+ """
+ return check_err(fdt_off_dt_struct(self._fdt))
+
+ def pack(self, quiet=()):
+ """Pack the device tree to remove unused space
+
+ This adjusts the tree in place.
+
+ Args:
+ quiet: Errors to ignore (empty to raise on all errors)
+
+ Raises:
+ FdtException if any error occurs
+ """
+ return check_err(fdt_pack(self._fdt), quiet)
+
+ def delprop(self, nodeoffset, prop_name):
+ """Delete a property from a node
+
+ Args:
+ nodeoffset: Node offset containing property to delete
+ prop_name: Name of property to delete
+
+ Raises:
+ FdtError if the property does not exist, or another error occurs
+ """
+ return check_err(fdt_delprop(self._fdt, nodeoffset, prop_name))
+
+ def getprop(self, nodeoffset, prop_name, quiet=()):
+ """Get a property from a node
+
+ Args:
+ nodeoffset: Node offset containing property to get
+ prop_name: Name of property to get
+ quiet: Errors to ignore (empty to raise on all errors)
+
+ Returns:
+ Value of property as a bytearray, or -ve error number
+
+ Raises:
+ FdtError if any error occurs (e.g. the property is not found)
+ """
+ pdata = check_err_null(fdt_getprop(self._fdt, nodeoffset, prop_name),
+ quiet)
+ if isinstance(pdata, (int)):
+ return pdata
+ return bytearray(pdata[0])
+
+ def get_phandle(self, nodeoffset):
+ """Get the phandle of a node
+
+ Args:
+ nodeoffset: Node offset to check
+
+ Returns:
+ phandle of node, or 0 if the node has no phandle or another error
+ occurs
+ """
+ return fdt_get_phandle(self._fdt, nodeoffset)
+
+ def parent_offset(self, nodeoffset, quiet=()):
+ """Get the offset of a node's parent
+
+ Args:
+ nodeoffset: Node offset to check
+ quiet: Errors to ignore (empty to raise on all errors)
+
+ Returns:
+ The offset of the parent node, if any
+
+ Raises:
+ FdtException if no parent found or other error occurs
+ """
+ return check_err(fdt_parent_offset(self._fdt, nodeoffset), quiet)
+
+ def node_offset_by_phandle(self, phandle, quiet=()):
+ """Get the offset of a node with the given phandle
+
+ Args:
+ phandle: Phandle to search for
+ quiet: Errors to ignore (empty to raise on all errors)
+
+ Returns:
+ The offset of node with that phandle, if any
+
+ Raises:
+ FdtException if no node found or other error occurs
+ """
+ return check_err(fdt_node_offset_by_phandle(self._fdt, phandle), quiet)
+
+class Property:
+ """Holds a device tree property name and value.
+
+ This holds a copy of a property taken from the device tree. It does not
+ reference the device tree, so if anything changes in the device tree,
+ a Property object will remain valid.
+
+ Properties:
+ name: Property name
+ value: Proper value as a bytearray
+ """
+ def __init__(self, name, value):
+ self.name = name
+ self.value = value
+%}
+
+%rename(fdt_property) fdt_property_func;
+
+typedef int fdt32_t;
+
+%include "libfdt/fdt.h"
+
+%include "typemaps.i"
+
+/* Most functions don't change the device tree, so use a const void * */
+%typemap(in) (const void *)(const void *fdt) {
+ if (!PyByteArray_Check($input)) {
+ SWIG_exception_fail(SWIG_TypeError, "in method '" "$symname"
+ "', argument " "$argnum"" of type '" "$type""'");
+ }
+ $1 = (void *)PyByteArray_AsString($input);
+ fdt = $1;
+ fdt = fdt; /* avoid unused variable warning */
+}
+
+/* Some functions do change the device tree, so use void * */
+%typemap(in) (void *)(const void *fdt) {
+ if (!PyByteArray_Check($input)) {
+ SWIG_exception_fail(SWIG_TypeError, "in method '" "$symname"
+ "', argument " "$argnum"" of type '" "$type""'");
+ }
+ $1 = PyByteArray_AsString($input);
+ fdt = $1;
+ fdt = fdt; /* avoid unused variable warning */
+}
+
+%typemap(out) (struct fdt_property *) {
+ PyObject *buff;
+
+ if ($1) {
+ resultobj = PyString_FromString(
+ fdt_string(fdt1, fdt32_to_cpu($1->nameoff)));
+ buff = PyByteArray_FromStringAndSize(
+ (const char *)($1 + 1), fdt32_to_cpu($1->len));
+ resultobj = SWIG_Python_AppendOutput(resultobj, buff);
+ }
+}
+
+%apply int *OUTPUT { int *lenp };
+
+/* typemap used for fdt_getprop() */
+%typemap(out) (const void *) {
+ if (!$1)
+ $result = Py_None;
+ else
+ $result = Py_BuildValue("s#", $1, *arg4);
+}
+
+/* We have both struct fdt_property and a function fdt_property() */
+%warnfilter(302) fdt_property;
+
+/* These are macros in the header so have to be redefined here */
+int fdt_magic(const void *fdt);
+int fdt_totalsize(const void *fdt);
+int fdt_off_dt_struct(const void *fdt);
+int fdt_off_dt_strings(const void *fdt);
+int fdt_off_mem_rsvmap(const void *fdt);
+int fdt_version(const void *fdt);
+int fdt_last_comp_version(const void *fdt);
+int fdt_boot_cpuid_phys(const void *fdt);
+int fdt_size_dt_strings(const void *fdt);
+int fdt_size_dt_struct(const void *fdt);
+
+%include <../libfdt/libfdt.h>
--- /dev/null
+#!/usr/bin/env python
+
+"""
+setup.py file for SWIG libfdt
+Copyright (C) 2017 Google, Inc.
+Written by Simon Glass <sjg@chromium.org>
+
+SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause
+
+Files to be built into the extension are provided in SOURCES
+C flags to use are provided in CPPFLAGS
+Object file directory is provided in OBJDIR
+Version is provided in VERSION
+
+If these variables are not given they are parsed from the Makefiles. This
+allows this script to be run stand-alone, e.g.:
+
+ ./pylibfdt/setup.py install [--prefix=...]
+"""
+
+from distutils.core import setup, Extension
+import os
+import re
+import sys
+
+# Decodes a Makefile assignment line into key and value (and plus for +=)
+RE_KEY_VALUE = re.compile('(?P<key>\w+) *(?P<plus>[+])?= *(?P<value>.*)$')
+
+
+def ParseMakefile(fname):
+ """Parse a Makefile to obtain its variables.
+
+ This collects variable assigments of the form:
+
+ VAR = value
+ VAR += more
+
+ It does not pick out := assignments, as these are not needed here. It does
+ handle line continuation.
+
+ Returns a dict:
+ key: Variable name (e.g. 'VAR')
+ value: Variable value (e.g. 'value more')
+ """
+ makevars = {}
+ with open(fname) as fd:
+ prev_text = '' # Continuation text from previous line(s)
+ for line in fd.read().splitlines():
+ if line and line[-1] == '\\': # Deal with line continuation
+ prev_text += line[:-1]
+ continue
+ elif prev_text:
+ line = prev_text + line
+ prev_text = '' # Continuation is now used up
+ m = RE_KEY_VALUE.match(line)
+ if m:
+ value = m.group('value') or ''
+ key = m.group('key')
+
+ # Appending to a variable inserts a space beforehand
+ if 'plus' in m.groupdict() and key in makevars:
+ makevars[key] += ' ' + value
+ else:
+ makevars[key] = value
+ return makevars
+
+def GetEnvFromMakefiles():
+ """Scan the Makefiles to obtain the settings we need.
+
+ This assumes that this script is being run from the top-level directory,
+ not the pylibfdt directory.
+
+ Returns:
+ Tuple with:
+ List of swig options
+ Version string
+ List of files to build
+ List of extra C preprocessor flags needed
+ Object directory to use (always '')
+ """
+ basedir = os.path.dirname(os.path.dirname(os.path.abspath(sys.argv[0])))
+ swig_opts = ['-I%s' % basedir]
+ makevars = ParseMakefile(os.path.join(basedir, 'Makefile'))
+ version = '%s.%s.%s' % (makevars['VERSION'], makevars['PATCHLEVEL'],
+ makevars['SUBLEVEL'])
+ makevars = ParseMakefile(os.path.join(basedir, 'libfdt', 'Makefile.libfdt'))
+ files = makevars['LIBFDT_SRCS'].split()
+ files = [os.path.join(basedir, 'libfdt', fname) for fname in files]
+ files.append('pylibfdt/libfdt.i')
+ cflags = ['-I%s' % basedir, '-I%s/libfdt' % basedir]
+ objdir = ''
+ return swig_opts, version, files, cflags, objdir
+
+
+progname = sys.argv[0]
+files = os.environ.get('SOURCES', '').split()
+cflags = os.environ.get('CPPFLAGS', '').split()
+objdir = os.environ.get('OBJDIR')
+version = os.environ.get('VERSION')
+swig_opts = os.environ.get('SWIG_OPTS', '').split()
+
+# If we were called directly rather than through our Makefile (which is often
+# the case with Python module installation), read the settings from the
+# Makefile.
+if not all((swig_opts, version, files, cflags, objdir)):
+ swig_opts, version, files, cflags, objdir = GetEnvFromMakefiles()
+
+libfdt_module = Extension(
+ '_libfdt',
+ sources = files,
+ extra_compile_args = cflags,
+ swig_opts = swig_opts,
+)
+
+setup(
+ name='libfdt',
+ version= version,
+ author='Simon Glass <sjg@chromium.org>',
+ description='Python binding for libfdt',
+ ext_modules=[libfdt_module],
+ package_dir={'': objdir},
+ py_modules=['pylibfdt/libfdt'],
+)
srcpos.h treesource.c util.c util.h version_gen.h Makefile.dtc \
dtc-lexer.l dtc-parser.y"
DTC_GENERATED="dtc-lexer.lex.c dtc-parser.tab.c dtc-parser.tab.h"
-LIBFDT_SOURCE="Makefile.libfdt fdt.c fdt.h fdt_empty_tree.c fdt_ro.c fdt_rw.c fdt_strerror.c fdt_sw.c fdt_wip.c libfdt.h libfdt_env.h libfdt_internal.h"
+LIBFDT_SOURCE="Makefile.libfdt fdt.c fdt.h fdt_addresses.c fdt_empty_tree.c \
+ fdt_overlay.c fdt_ro.c fdt_rw.c fdt_strerror.c fdt_sw.c \
+ fdt_wip.c libfdt.h libfdt_env.h libfdt_internal.h"
get_last_dtc_version() {
git log --oneline scripts/dtc/ | grep 'upstream' | head -1 | sed -e 's/^.* \(.*\)/\1/'
-#define DTC_VERSION "DTC 1.4.4-gfe50bd1e"
+#define DTC_VERSION "DTC 1.4.5-gb1a60033"
color: #8080ff
}
+.timestamp {
+ color: #8080ff
+}
+
.status-pass {
color: #00ff00
}
# each represented in a well-delineated/-structured fashion.
import cgi
+import datetime
import os.path
import shutil
import subprocess
self.logfile.write(self, output)
if self.chained_file:
self.chained_file.write(output)
+ self.logfile.timestamp()
# Store the output so it can be accessed if we raise an exception.
self.output = output
self.blocks = []
self.cur_evt = 1
self.anchor = 0
+ self.timestamp_start = self._get_time()
+ self.timestamp_prev = self.timestamp_start
+ self.timestamp_blocks = []
shutil.copy(mod_dir + '/multiplexed_log.css', os.path.dirname(fn))
self.f.write('''\
self._terminate_stream()
self.blocks.append(marker)
+ self.timestamp_blocks.append(self._get_time())
if not anchor:
self.anchor += 1
anchor = str(self.anchor)
self.f.write('<div class="section-header block-header">Section: ' +
blk_path + '</div>\n')
self.f.write('<div class="section-content block-content">\n')
+ self.timestamp()
return anchor
raise Exception('Block nesting mismatch: "%s" "%s"' %
(marker, '/'.join(self.blocks)))
self._terminate_stream()
+ timestamp_now = self._get_time()
+ timestamp_section_start = self.timestamp_blocks.pop()
+ delta_section = timestamp_now - timestamp_section_start
+ self._note("timestamp",
+ "TIME: SINCE-SECTION: " + str(delta_section))
blk_path = '/'.join(self.blocks)
self.f.write('<div class="section-trailer block-trailer">' +
'End section: ' + blk_path + '</div>\n')
self._note("action", msg)
+ def _get_time(self):
+ return datetime.datetime.now()
+
+ def timestamp(self):
+ """Write a timestamp to the log file.
+
+ Args:
+ None
+
+ Returns:
+ Nothing.
+ """
+
+ timestamp_now = self._get_time()
+ delta_prev = timestamp_now - self.timestamp_prev
+ delta_start = timestamp_now - self.timestamp_start
+ self.timestamp_prev = timestamp_now
+
+ self._note("timestamp",
+ "TIME: NOW: " + timestamp_now.strftime("%Y/%m/%d %H:%M:%S.%f"))
+ self._note("timestamp",
+ "TIME: SINCE-PREV: " + str(delta_prev))
+ self._note("timestamp",
+ "TIME: SINCE-START: " + str(delta_start))
+
def status_pass(self, msg, anchor=None):
"""Write a note to the log file describing test(s) which passed.
self.log.error(str(ex))
self.cleanup_spawn()
raise
+ finally:
+ self.log.timestamp()
def run_command_list(self, cmds):
"""Run a list of commands.
self.cleanup_spawn()
raise
finally:
+ self.log.timestamp()
self.log.end_section('Starting U-Boot')
def cleanup_spawn(self):
-/_libfdt.so
/atmel_pmecc_params
/bin2header
/bmp_logo
/img2srec
/kwboot
/lib/
-/libfdt.py
-/libfdt.pyc
-/libfdt_wrap.c
/mips-relocs
/mkenvimage
/mkexynosspl
hostprogs-$(CONFIG_FIT_SIGNATURE) += fit_info fit_check_sign
FIT_SIG_OBJS-$(CONFIG_FIT_SIGNATURE) := common/image-sig.o
-# Flattened device tree objects
-LIBFDT_CSRCS := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c \
- fdt_empty_tree.c fdt_addresses.c fdt_overlay.c \
- fdt_region.c
-
-# Unfortunately setup.py below cannot handle srctree being ".." which it often
-# is. It fails with an error like:
-# Fatal error: can't create build/temp.linux-x86_64-2.7/../lib/libfdt/fdt.o:
-# No such file or directory
-# To fix this, use an absolute path.
-libfdt_tree := $(shell readlink -f $(srctree)/lib/libfdt)
-
-LIBFDT_SRCS := $(addprefix $(libfdt_tree)/, $(LIBFDT_CSRCS))
-LIBFDT_SWIG := $(addprefix $(libfdt_tree)/, pylibfdt/libfdt.i)
-LIBFDT_OBJS := $(addprefix lib/libfdt/, $(patsubst %.c, %.o, $(LIBFDT_CSRCS)))
+
+# The following files are synced with upstream DTC.
+# Use synced versions from scripts/dtc/libfdt/.
+LIBFDT_SRCS_SYNCED := fdt.c fdt_sw.c fdt_strerror.c fdt_empty_tree.c \
+ fdt_addresses.c fdt_overlay.c
+# The following files are locally modified for U-Boot (unfotunately).
+# Use U-Boot own versions from lib/libfdt/.
+LIBFDT_SRCS_UNSYNCED := fdt_ro.c fdt_wip.c fdt_rw.c fdt_region.c
+
+LIBFDT_OBJS := $(addprefix libfdt/, $(patsubst %.c, %.o, $(LIBFDT_SRCS_SYNCED))) \
+ $(addprefix lib/libfdt/, $(patsubst %.c, %.o, $(LIBFDT_SRCS_UNSYNCED)))
RSA_OBJS-$(CONFIG_FIT_SIGNATURE) := $(addprefix lib/rsa/, \
rsa-sign.o rsa-verify.o rsa-checksum.o \
fit_info-objs := $(dumpimage-mkimage-objs) fit_info.o
fit_check_sign-objs := $(dumpimage-mkimage-objs) fit_check_sign.o
-# Unfortunately setup.py (or actually the Python distutil implementation)
-# puts files into the same directory as the .i file. We cannot touch the source
-# directory, so we copy the .i file into the tools/ build subdirectory before
-# calling setup. This directory is safe to write to. This ensures that we get
-# all three files in $(obj)/tools: _libfdt.so, libfdt.py and libfdt_wrap.c
-# The latter is a temporary file which we could actually remove.
-tools/_libfdt.so: $(LIBFDT_SRCS) $(LIBFDT_SWIG)
- $(Q)cp $(LIBFDT_SWIG) tools/.
- $(Q)unset CC; \
- unset CROSS_COMPILE; \
- LDFLAGS="$(HOSTLDFLAGS)" CFLAGS= VERSION="u-boot-$(UBOOTVERSION)" \
- CPPFLAGS="$(_hostc_flags)" OBJDIR=tools \
- SOURCES="$(LIBFDT_SRCS) tools/libfdt.i" \
- SWIG_OPTS="-I$(srctree)/lib/libfdt -I$(srctree)/lib" \
- $(PYTHON) $(libfdt_tree)/pylibfdt/setup.py --quiet build_ext \
- --build-lib tools
-
ifneq ($(CONFIG_MX23)$(CONFIG_MX28),)
# Add CONFIG_MXS into host CFLAGS, so we can check whether or not register
# the mxsimage support within tools/mxsimage.c .
always := $(hostprogs-y)
-# Build a libfdt Python module if swig is available
-# Use 'sudo apt-get install swig libpython-dev' to enable this
-always += $(if $(shell which swig 2> /dev/null),_libfdt.so)
-
# Generated LCD/video logo
LOGO_H = $(objtree)/include/bmp_logo.h
LOGO_DATA_H = $(objtree)/include/bmp_logo_data.h
sys.path.insert(0, os.path.join(our_path, dirname))
# Bring in the libfdt module
-sys.path.insert(0, 'tools')
+sys.path.insert(0, 'scripts/dtc/pylibfdt')
# Also allow entry-type modules to be brought in from the etype directory.
sys.path.insert(0, os.path.join(our_path, 'etype'))
--- /dev/null
+#include "fdt_host.h"
+#include "../scripts/dtc/libfdt/fdt.c"
--- /dev/null
+#include "fdt_host.h"
+#include "../scripts/dtc/libfdt/fdt_addresses.c"
--- /dev/null
+#include "fdt_host.h"
+#include "../scripts/dtc/libfdt/fdt_empty_tree.c"
--- /dev/null
+#include "fdt_host.h"
+#include "../scripts/dtc/libfdt/fdt_overlay.c"
--- /dev/null
+#include "fdt_host.h"
+#include "../scripts/dtc/libfdt/fdt_strerror.c"
--- /dev/null
+#include "fdt_host.h"
+#include "../scripts/dtc/libfdt/fdt_sw.c"
projects / u-boot / commitdiff