]> git.sur5r.net Git - u-boot/commitdiff
Merge branch 'next' of git://git.denx.de/u-boot-video
authorTom Rini <trini@konsulko.com>
Thu, 21 Sep 2017 11:51:20 +0000 (07:51 -0400)
committerTom Rini <trini@konsulko.com>
Thu, 21 Sep 2017 11:51:20 +0000 (07:51 -0400)
drivers/video/Kconfig
drivers/video/Makefile
drivers/video/backlight_gpio.c [new file with mode: 0644]
drivers/video/cfb_console.c
drivers/video/simplefb.c [new file with mode: 0644]
drivers/video/stm32/Kconfig [new file with mode: 0644]
drivers/video/stm32/Makefile [new file with mode: 0644]
drivers/video/stm32/stm32_ltdc.c [new file with mode: 0644]
drivers/video/video-uclass.c

index 082cc4a528be58169d9d5b6f2d63d8d3ef2a663c..7ba7b580db1158f5ee4acaa8b004f603e7519efe 100644 (file)
@@ -14,6 +14,27 @@ config DM_VIDEO
          option compiles in the video uclass and routes all LCD/video access
          through this.
 
+config BACKLIGHT_PWM
+       bool "Generic PWM based Backlight Driver"
+       depends on DM_VIDEO && DM_PWM
+       default y
+       help
+         If you have a LCD backlight adjustable by PWM, say Y to enable
+         this driver.
+         This driver can be use with "simple-panel" and
+         it understands the standard device tree
+         (leds/backlight/pwm-backlight.txt)
+
+config BACKLIGHT_GPIO
+       bool "Generic GPIO based Backlight Driver"
+       depends on DM_VIDEO
+       help
+         If you have a LCD backlight adjustable by GPIO, say Y to enable
+         this driver.
+         This driver can be used with "simple-panel" and
+         it understands the standard device tree
+         (leds/backlight/gpio-backlight.txt)
+
 config VIDEO_BPP8
        bool "Support 8-bit-per-pixel displays"
        depends on DM_VIDEO
@@ -98,6 +119,14 @@ config SYS_WHITE_ON_BLACK
         better in low-light situations or to reduce eye strain in some
         cases.
 
+config NO_FB_CLEAR
+       bool "Skip framebuffer clear"
+       help
+         If firmware (whatever loads u-boot) has already put a splash image
+         on screen, you might want to preserve it until whatever u-boot
+         loads takes over the screen.  This, for example, can be used to
+         keep splash image on screen until grub graphical boot menu starts.
+
 source "drivers/video/fonts/Kconfig"
 
 config VIDCONSOLE_AS_LCD
@@ -436,6 +465,8 @@ config VIDEO_SANDBOX_SDL
          console device and can display stdout output. Within U-Boot is is
          a normal bitmap display and can display images as well as text.
 
+source "drivers/video/stm32/Kconfig"
+
 config VIDEO_TEGRA20
        bool "Enable LCD support on Tegra20"
        depends on OF_CONTROL
@@ -601,4 +632,14 @@ config VIDEO_DW_HDMI
          rather requires a SoC-specific glue driver to call it), it
          can not be enabled from the configuration menu.
 
+config VIDEO_SIMPLE
+       bool "Simple display driver for preconfigured display"
+       help
+         Enables a simple generic display driver which utilizes the
+         simple-framebuffer devicetree bindings.
+
+         This driver assumes that the display hardware has been initialized
+         before u-boot starts, and u-boot will simply render to the pre-
+         allocated frame buffer surface.
+
 endmenu
index 5cf8909295c73c22ca9b171d72bd7634fc45c57b..dfafe08fc5094c5dfe0c3e7c3ed840e12e104b72 100644 (file)
@@ -11,9 +11,8 @@ obj-$(CONFIG_DM_VIDEO) += backlight-uclass.o
 obj-$(CONFIG_DM_VIDEO) += panel-uclass.o simple_panel.o
 obj-$(CONFIG_DM_VIDEO) += video-uclass.o vidconsole-uclass.o
 obj-$(CONFIG_DM_VIDEO) += video_bmp.o
-ifdef CONFIG_DM_VIDEO
-obj-$(CONFIG_DM_PWM) += pwm_backlight.o
-endif
+obj-$(CONFIG_BACKLIGHT_PWM) += pwm_backlight.o
+obj-$(CONFIG_BACKLIGHT_GPIO) += backlight_gpio.o
 obj-$(CONFIG_CONSOLE_NORMAL) += console_normal.o
 obj-$(CONFIG_CONSOLE_ROTATION) += console_rotate.o
 obj-$(CONFIG_CONSOLE_TRUETYPE) += console_truetype.o fonts/
@@ -53,10 +52,11 @@ obj-$(CONFIG_FORMIKE) += formike.o
 obj-$(CONFIG_LG4573) += lg4573.o
 obj-$(CONFIG_AM335X_LCD) += am335x-fb.o
 obj-$(CONFIG_VIDEO_DW_HDMI) += dw_hdmi.o
-
+obj-$(CONFIG_VIDEO_SIMPLE) += simplefb.o
 obj-${CONFIG_VIDEO_TEGRA124} += tegra124/
 obj-${CONFIG_EXYNOS_FB} += exynos/
 obj-${CONFIG_VIDEO_ROCKCHIP} += rockchip/
+obj-${CONFIG_VIDEO_STM32} += stm32/
 
 obj-y += bridge/
 obj-y += sunxi/
diff --git a/drivers/video/backlight_gpio.c b/drivers/video/backlight_gpio.c
new file mode 100644 (file)
index 0000000..772df5d
--- /dev/null
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author: Patrick Delaunay <patrick.delaunay@st.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <backlight.h>
+#include <asm/gpio.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct gpio_backlight_priv {
+       struct gpio_desc gpio;
+       bool def_value;
+};
+
+static int gpio_backlight_enable(struct udevice *dev)
+{
+       struct gpio_backlight_priv *priv = dev_get_priv(dev);
+
+       dm_gpio_set_value(&priv->gpio, 1);
+
+       return 0;
+}
+
+static int gpio_backlight_ofdata_to_platdata(struct udevice *dev)
+{
+       struct gpio_backlight_priv *priv = dev_get_priv(dev);
+       int ret;
+
+       ret = gpio_request_by_name(dev, "gpios", 0, &priv->gpio,
+                                  GPIOD_IS_OUT);
+       if (ret) {
+               debug("%s: Warning: cannot get GPIO: ret=%d\n",
+                     __func__, ret);
+               return ret;
+       }
+
+       priv->def_value = dev_read_bool(dev, "default-on");
+
+       return 0;
+}
+
+static int gpio_backlight_probe(struct udevice *dev)
+{
+       struct gpio_backlight_priv *priv = dev_get_priv(dev);
+
+       if (priv->def_value)
+               gpio_backlight_enable(dev);
+
+       return 0;
+}
+
+static const struct backlight_ops gpio_backlight_ops = {
+       .enable = gpio_backlight_enable,
+};
+
+static const struct udevice_id gpio_backlight_ids[] = {
+       { .compatible = "gpio-backlight" },
+       { }
+};
+
+U_BOOT_DRIVER(gpio_backlight) = {
+       .name   = "gpio_backlight",
+       .id     = UCLASS_PANEL_BACKLIGHT,
+       .of_match = gpio_backlight_ids,
+       .ops    = &gpio_backlight_ops,
+       .ofdata_to_platdata     = gpio_backlight_ofdata_to_platdata,
+       .probe          = gpio_backlight_probe,
+       .priv_auto_alloc_size   = sizeof(struct gpio_backlight_priv),
+};
index 6c5425c195e927d4594d6f4ccc97cbb56f88bbfa..74cc20d6532f374c87e96dd5b9c372b8973a91f6 100644 (file)
@@ -2081,7 +2081,8 @@ static int cfg_video_init(void)
        }
        eorx = fgx ^ bgx;
 
-       video_clear();
+       if (!CONFIG_IS_ENABLED(NO_FB_CLEAR))
+               video_clear();
 
 #ifdef CONFIG_VIDEO_LOGO
        /* Plot the logo and get start point of console */
diff --git a/drivers/video/simplefb.c b/drivers/video/simplefb.c
new file mode 100644 (file)
index 0000000..850a279
--- /dev/null
@@ -0,0 +1,73 @@
+/*
+ * (C) Copyright 2017 Rob Clark
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <fdt_support.h>
+#include <video.h>
+
+static int simple_video_probe(struct udevice *dev)
+{
+       struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
+       struct video_priv *uc_priv = dev_get_uclass_priv(dev);
+       const void *blob = gd->fdt_blob;
+       const int node = dev_of_offset(dev);
+       const char *format;
+       fdt_addr_t base;
+       fdt_size_t size;
+
+       base = fdtdec_get_addr_size_auto_parent(blob, dev_of_offset(dev->parent),
+                       node, "reg", 0, &size, false);
+       if (base == FDT_ADDR_T_NONE) {
+               debug("%s: Failed to decode memory region\n", __func__);
+               return -EINVAL;
+       }
+
+       debug("%s: base=%llx, size=%llu\n", __func__, base, size);
+
+       /*
+        * TODO is there some way to reserve the framebuffer
+        * region so it isn't clobbered?
+        */
+       plat->base = base;
+       plat->size = size;
+
+       video_set_flush_dcache(dev, true);
+
+       debug("%s: Query resolution...\n", __func__);
+
+       uc_priv->xsize = fdtdec_get_uint(blob, node, "width", 0);
+       uc_priv->ysize = fdtdec_get_uint(blob, node, "height", 0);
+       uc_priv->rot = 0;
+
+       format = fdt_getprop(blob, node, "format", NULL);
+       debug("%s: %dx%d@%s\n", __func__, uc_priv->xsize, uc_priv->ysize, format);
+
+       if (strcmp(format, "r5g6b5") == 0) {
+               uc_priv->bpix = VIDEO_BPP16;
+       } else if (strcmp(format, "a8b8g8r8") == 0) {
+               uc_priv->bpix = VIDEO_BPP32;
+       } else {
+               printf("%s: invalid format: %s\n", __func__, format);
+               return -EINVAL;
+       }
+
+       return 0;
+}
+
+static const struct udevice_id simple_video_ids[] = {
+       { .compatible = "simple-framebuffer" },
+       { }
+};
+
+U_BOOT_DRIVER(simple_video) = {
+       .name   = "simple_video",
+       .id     = UCLASS_VIDEO,
+       .of_match = simple_video_ids,
+       .probe  = simple_video_probe,
+       .flags  = DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/video/stm32/Kconfig b/drivers/video/stm32/Kconfig
new file mode 100644 (file)
index 0000000..113a2bb
--- /dev/null
@@ -0,0 +1,44 @@
+#
+# Copyright (C) STMicroelectronics SA 2017
+#
+# Authors: Philippe Cornu <philippe.cornu@st.com>
+#          Yannick Fertre <yannick.fertre@st.com>
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+menuconfig VIDEO_STM32
+       bool "Enable STM32 video support"
+       depends on DM_VIDEO
+       help
+         STM32 supports many video output options including RGB and
+         DSI. This option enables these supports which can be used on
+         devices which have RGB TFT or DSI display connected.
+
+config VIDEO_STM32_MAX_XRES
+       int "Maximum horizontal resolution (for memory allocation purposes)"
+       depends on VIDEO_STM32
+       default 640
+       help
+         The maximum horizontal resolution to support for the framebuffer.
+         This configuration is used for reserving/allocating memory for the
+         framebuffer during device-model binding/probing.
+
+config VIDEO_STM32_MAX_YRES
+       int "Maximum vertical resolution (for memory allocation purposes)"
+       depends on VIDEO_STM32
+       default 480
+       help
+         The maximum vertical resolution to support for the framebuffer.
+         This configuration is used for reserving/allocating memory for the
+         framebuffer during device-model binding/probing.
+
+config VIDEO_STM32_MAX_BPP
+       int "Maximum bits per pixel (for memory allocation purposes)"
+       depends on VIDEO_STM32
+       default 16
+       help
+         The maximum bits per pixel to support for the framebuffer.
+         This configuration is used for reserving/allocating memory for the
+         framebuffer during device-model binding/probing.
+
diff --git a/drivers/video/stm32/Makefile b/drivers/video/stm32/Makefile
new file mode 100644 (file)
index 0000000..372a2e1
--- /dev/null
@@ -0,0 +1,10 @@
+#
+# Copyright (C) STMicroelectronics SA 2017
+#
+# Authors: Philippe Cornu <philippe.cornu@st.com>
+#          Yannick Fertre <yannick.fertre@st.com>
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-${CONFIG_VIDEO_STM32} = stm32_ltdc.o
diff --git a/drivers/video/stm32/stm32_ltdc.c b/drivers/video/stm32/stm32_ltdc.c
new file mode 100644 (file)
index 0000000..b417ac2
--- /dev/null
@@ -0,0 +1,406 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2017
+ *
+ * Authors: Philippe Cornu <philippe.cornu@st.com>
+ *          Yannick Fertre <yannick.fertre@st.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <panel.h>
+#include <video.h>
+#include <asm/io.h>
+#include <asm/arch/gpio.h>
+#include <dm/device-internal.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct stm32_ltdc_priv {
+       void __iomem *regs;
+       struct display_timing timing;
+       enum video_log2_bpp l2bpp;
+       u32 bg_col_argb;
+       u32 crop_x, crop_y, crop_w, crop_h;
+       u32 alpha;
+};
+
+/* LTDC main registers */
+#define LTDC_IDR       0x00    /* IDentification */
+#define LTDC_LCR       0x04    /* Layer Count */
+#define LTDC_SSCR      0x08    /* Synchronization Size Configuration */
+#define LTDC_BPCR      0x0C    /* Back Porch Configuration */
+#define LTDC_AWCR      0x10    /* Active Width Configuration */
+#define LTDC_TWCR      0x14    /* Total Width Configuration */
+#define LTDC_GCR       0x18    /* Global Control */
+#define LTDC_GC1R      0x1C    /* Global Configuration 1 */
+#define LTDC_GC2R      0x20    /* Global Configuration 2 */
+#define LTDC_SRCR      0x24    /* Shadow Reload Configuration */
+#define LTDC_GACR      0x28    /* GAmma Correction */
+#define LTDC_BCCR      0x2C    /* Background Color Configuration */
+#define LTDC_IER       0x34    /* Interrupt Enable */
+#define LTDC_ISR       0x38    /* Interrupt Status */
+#define LTDC_ICR       0x3C    /* Interrupt Clear */
+#define LTDC_LIPCR     0x40    /* Line Interrupt Position Conf. */
+#define LTDC_CPSR      0x44    /* Current Position Status */
+#define LTDC_CDSR      0x48    /* Current Display Status */
+
+/* LTDC layer 1 registers */
+#define LTDC_L1LC1R    0x80    /* L1 Layer Configuration 1 */
+#define LTDC_L1LC2R    0x84    /* L1 Layer Configuration 2 */
+#define LTDC_L1CR      0x84    /* L1 Control */
+#define LTDC_L1WHPCR   0x88    /* L1 Window Hor Position Config */
+#define LTDC_L1WVPCR   0x8C    /* L1 Window Vert Position Config */
+#define LTDC_L1CKCR    0x90    /* L1 Color Keying Configuration */
+#define LTDC_L1PFCR    0x94    /* L1 Pixel Format Configuration */
+#define LTDC_L1CACR    0x98    /* L1 Constant Alpha Config */
+#define LTDC_L1DCCR    0x9C    /* L1 Default Color Configuration */
+#define LTDC_L1BFCR    0xA0    /* L1 Blend Factors Configuration */
+#define LTDC_L1FBBCR   0xA4    /* L1 FrameBuffer Bus Control */
+#define LTDC_L1AFBCR   0xA8    /* L1 AuxFB Control */
+#define LTDC_L1CFBAR   0xAC    /* L1 Color FrameBuffer Address */
+#define LTDC_L1CFBLR   0xB0    /* L1 Color FrameBuffer Length */
+#define LTDC_L1CFBLNR  0xB4    /* L1 Color FrameBuffer Line Nb */
+#define LTDC_L1AFBAR   0xB8    /* L1 AuxFB Address */
+#define LTDC_L1AFBLR   0xBC    /* L1 AuxFB Length */
+#define LTDC_L1AFBLNR  0xC0    /* L1 AuxFB Line Number */
+#define LTDC_L1CLUTWR  0xC4    /* L1 CLUT Write */
+
+/* Bit definitions */
+#define SSCR_VSH       GENMASK(10, 0)  /* Vertical Synchronization Height */
+#define SSCR_HSW       GENMASK(27, 16) /* Horizontal Synchronization Width */
+
+#define BPCR_AVBP      GENMASK(10, 0)  /* Accumulated Vertical Back Porch */
+#define BPCR_AHBP      GENMASK(27, 16) /* Accumulated Horizontal Back Porch */
+
+#define AWCR_AAH       GENMASK(10, 0)  /* Accumulated Active Height */
+#define AWCR_AAW       GENMASK(27, 16) /* Accumulated Active Width */
+
+#define TWCR_TOTALH    GENMASK(10, 0)  /* TOTAL Height */
+#define TWCR_TOTALW    GENMASK(27, 16) /* TOTAL Width */
+
+#define GCR_LTDCEN     BIT(0)          /* LTDC ENable */
+#define GCR_DEN                BIT(16)         /* Dither ENable */
+#define GCR_PCPOL      BIT(28)         /* Pixel Clock POLarity-Inverted */
+#define GCR_DEPOL      BIT(29)         /* Data Enable POLarity-High */
+#define GCR_VSPOL      BIT(30)         /* Vertical Synchro POLarity-High */
+#define GCR_HSPOL      BIT(31)         /* Horizontal Synchro POLarity-High */
+
+#define GC1R_WBCH      GENMASK(3, 0)   /* Width of Blue CHannel output */
+#define GC1R_WGCH      GENMASK(7, 4)   /* Width of Green Channel output */
+#define GC1R_WRCH      GENMASK(11, 8)  /* Width of Red Channel output */
+#define GC1R_PBEN      BIT(12)         /* Precise Blending ENable */
+#define GC1R_DT                GENMASK(15, 14) /* Dithering Technique */
+#define GC1R_GCT       GENMASK(19, 17) /* Gamma Correction Technique */
+#define GC1R_SHREN     BIT(21)         /* SHadow Registers ENabled */
+#define GC1R_BCP       BIT(22)         /* Background Colour Programmable */
+#define GC1R_BBEN      BIT(23)         /* Background Blending ENabled */
+#define GC1R_LNIP      BIT(24)         /* Line Number IRQ Position */
+#define GC1R_TP                BIT(25)         /* Timing Programmable */
+#define GC1R_IPP       BIT(26)         /* IRQ Polarity Programmable */
+#define GC1R_SPP       BIT(27)         /* Sync Polarity Programmable */
+#define GC1R_DWP       BIT(28)         /* Dither Width Programmable */
+#define GC1R_STREN     BIT(29)         /* STatus Registers ENabled */
+#define GC1R_BMEN      BIT(31)         /* Blind Mode ENabled */
+
+#define GC2R_EDCA      BIT(0)          /* External Display Control Ability  */
+#define GC2R_STSAEN    BIT(1)          /* Slave Timing Sync Ability ENabled */
+#define GC2R_DVAEN     BIT(2)          /* Dual-View Ability ENabled */
+#define GC2R_DPAEN     BIT(3)          /* Dual-Port Ability ENabled */
+#define GC2R_BW                GENMASK(6, 4)   /* Bus Width (log2 of nb of bytes) */
+#define GC2R_EDCEN     BIT(7)          /* External Display Control ENabled */
+
+#define SRCR_IMR       BIT(0)          /* IMmediate Reload */
+#define SRCR_VBR       BIT(1)          /* Vertical Blanking Reload */
+
+#define LXCR_LEN       BIT(0)          /* Layer ENable */
+#define LXCR_COLKEN    BIT(1)          /* Color Keying Enable */
+#define LXCR_CLUTEN    BIT(4)          /* Color Look-Up Table ENable */
+
+#define LXWHPCR_WHSTPOS        GENMASK(11, 0)  /* Window Horizontal StarT POSition */
+#define LXWHPCR_WHSPPOS        GENMASK(27, 16) /* Window Horizontal StoP POSition */
+
+#define LXWVPCR_WVSTPOS        GENMASK(10, 0)  /* Window Vertical StarT POSition */
+#define LXWVPCR_WVSPPOS        GENMASK(26, 16) /* Window Vertical StoP POSition */
+
+#define LXPFCR_PF      GENMASK(2, 0)   /* Pixel Format */
+
+#define LXCACR_CONSTA  GENMASK(7, 0)   /* CONSTant Alpha */
+
+#define LXBFCR_BF2     GENMASK(2, 0)   /* Blending Factor 2 */
+#define LXBFCR_BF1     GENMASK(10, 8)  /* Blending Factor 1 */
+
+#define LXCFBLR_CFBLL  GENMASK(12, 0)  /* Color Frame Buffer Line Length */
+#define LXCFBLR_CFBP   GENMASK(28, 16) /* Color Frame Buffer Pitch in bytes */
+
+#define LXCFBLNR_CFBLN GENMASK(10, 0)  /* Color Frame Buffer Line Number */
+
+#define BF1_PAXCA      0x600           /* Pixel Alpha x Constant Alpha */
+#define BF2_1PAXCA     0x007           /* 1 - (Pixel Alpha x Constant Alpha) */
+
+enum stm32_ltdc_pix_fmt {
+       PF_ARGB8888 = 0,
+       PF_RGB888,
+       PF_RGB565,
+       PF_ARGB1555,
+       PF_ARGB4444,
+       PF_L8,
+       PF_AL44,
+       PF_AL88
+};
+
+/* TODO add more color format support */
+static u32 stm32_ltdc_get_pixel_format(enum video_log2_bpp l2bpp)
+{
+       enum stm32_ltdc_pix_fmt pf;
+
+       switch (l2bpp) {
+       case VIDEO_BPP16:
+               pf = PF_RGB565;
+               break;
+
+       case VIDEO_BPP1:
+       case VIDEO_BPP2:
+       case VIDEO_BPP4:
+       case VIDEO_BPP8:
+       case VIDEO_BPP32:
+       default:
+               debug("%s: warning %dbpp not supported yet, %dbpp instead\n",
+                     __func__, VNBITS(l2bpp), VNBITS(VIDEO_BPP16));
+               pf = PF_RGB565;
+               break;
+       }
+
+       debug("%s: %d bpp -> ltdc pf %d\n", __func__, VNBITS(l2bpp), pf);
+
+       return (u32)pf;
+}
+
+static void stm32_ltdc_enable(struct stm32_ltdc_priv *priv)
+{
+       /* Reload configuration immediately & enable LTDC */
+       setbits_le32(priv->regs + LTDC_SRCR, SRCR_IMR);
+       setbits_le32(priv->regs + LTDC_GCR, GCR_LTDCEN);
+}
+
+static void stm32_ltdc_set_mode(struct stm32_ltdc_priv *priv)
+{
+       void __iomem *regs = priv->regs;
+       struct display_timing *timing = &priv->timing;
+       u32 hsync, vsync, acc_hbp, acc_vbp, acc_act_w, acc_act_h;
+       u32 total_w, total_h;
+       u32 val;
+
+       /* Convert video timings to ltdc timings */
+       hsync = timing->hsync_len.typ - 1;
+       vsync = timing->vsync_len.typ - 1;
+       acc_hbp = hsync + timing->hback_porch.typ;
+       acc_vbp = vsync + timing->vback_porch.typ;
+       acc_act_w = acc_hbp + timing->hactive.typ;
+       acc_act_h = acc_vbp + timing->vactive.typ;
+       total_w = acc_act_w + timing->hfront_porch.typ;
+       total_h = acc_act_h + timing->vfront_porch.typ;
+
+       /* Synchronization sizes */
+       val = (hsync << 16) | vsync;
+       clrsetbits_le32(regs + LTDC_SSCR, SSCR_VSH | SSCR_HSW, val);
+
+       /* Accumulated back porch */
+       val = (acc_hbp << 16) | acc_vbp;
+       clrsetbits_le32(regs + LTDC_BPCR, BPCR_AVBP | BPCR_AHBP, val);
+
+       /* Accumulated active width */
+       val = (acc_act_w << 16) | acc_act_h;
+       clrsetbits_le32(regs + LTDC_AWCR, AWCR_AAW | AWCR_AAH, val);
+
+       /* Total width & height */
+       val = (total_w << 16) | total_h;
+       clrsetbits_le32(regs + LTDC_TWCR, TWCR_TOTALH | TWCR_TOTALW, val);
+
+       /* Signal polarities */
+       val = 0;
+       debug("%s: timing->flags 0x%08x\n", __func__, timing->flags);
+       if (timing->flags & DISPLAY_FLAGS_HSYNC_HIGH)
+               val |= GCR_HSPOL;
+       if (timing->flags & DISPLAY_FLAGS_VSYNC_HIGH)
+               val |= GCR_VSPOL;
+       if (timing->flags & DISPLAY_FLAGS_DE_HIGH)
+               val |= GCR_DEPOL;
+       if (timing->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
+               val |= GCR_PCPOL;
+       clrsetbits_le32(regs + LTDC_GCR,
+                       GCR_HSPOL | GCR_VSPOL | GCR_DEPOL | GCR_PCPOL, val);
+
+       /* Overall background color */
+       writel(priv->bg_col_argb, priv->regs + LTDC_BCCR);
+}
+
+static void stm32_ltdc_set_layer1(struct stm32_ltdc_priv *priv, ulong fb_addr)
+{
+       void __iomem *regs = priv->regs;
+       u32 x0, x1, y0, y1;
+       u32 pitch_in_bytes;
+       u32 line_length;
+       u32 bus_width;
+       u32 val, tmp, bpp;
+
+       x0 = priv->crop_x;
+       x1 = priv->crop_x + priv->crop_w - 1;
+       y0 = priv->crop_y;
+       y1 = priv->crop_y + priv->crop_h - 1;
+
+       /* Horizontal start and stop position */
+       tmp = (readl(regs + LTDC_BPCR) & BPCR_AHBP) >> 16;
+       val = ((x1 + 1 + tmp) << 16) + (x0 + 1 + tmp);
+       clrsetbits_le32(regs + LTDC_L1WHPCR, LXWHPCR_WHSTPOS | LXWHPCR_WHSPPOS,
+                       val);
+
+       /* Vertical start & stop position */
+       tmp = readl(regs + LTDC_BPCR) & BPCR_AVBP;
+       val = ((y1 + 1 + tmp) << 16) + (y0 + 1 + tmp);
+       clrsetbits_le32(regs + LTDC_L1WVPCR, LXWVPCR_WVSTPOS | LXWVPCR_WVSPPOS,
+                       val);
+
+       /* Layer background color */
+       writel(priv->bg_col_argb, regs + LTDC_L1DCCR);
+
+       /* Color frame buffer pitch in bytes & line length */
+       bpp = VNBITS(priv->l2bpp);
+       pitch_in_bytes = priv->crop_w * (bpp >> 3);
+       bus_width = 8 << ((readl(regs + LTDC_GC2R) & GC2R_BW) >> 4);
+       line_length = ((bpp >> 3) * priv->crop_w) + (bus_width >> 3) - 1;
+       val = (pitch_in_bytes << 16) | line_length;
+       clrsetbits_le32(regs + LTDC_L1CFBLR, LXCFBLR_CFBLL | LXCFBLR_CFBP, val);
+
+       /* Pixel format */
+       val = stm32_ltdc_get_pixel_format(priv->l2bpp);
+       clrsetbits_le32(regs + LTDC_L1PFCR, LXPFCR_PF, val);
+
+       /* Constant alpha value */
+       clrsetbits_le32(regs + LTDC_L1CACR, LXCACR_CONSTA, priv->alpha);
+
+       /* Blending factors */
+       clrsetbits_le32(regs + LTDC_L1BFCR, LXBFCR_BF2 | LXBFCR_BF1,
+                       BF1_PAXCA | BF2_1PAXCA);
+
+       /* Frame buffer line number */
+       clrsetbits_le32(regs + LTDC_L1CFBLNR, LXCFBLNR_CFBLN, priv->crop_h);
+
+       /* Frame buffer address */
+       writel(fb_addr, regs + LTDC_L1CFBAR);
+
+       /* Enable layer 1 */
+       setbits_le32(priv->regs + LTDC_L1CR, LXCR_LEN);
+}
+
+static int stm32_ltdc_probe(struct udevice *dev)
+{
+       struct video_uc_platdata *uc_plat = dev_get_uclass_platdata(dev);
+       struct video_priv *uc_priv = dev_get_uclass_priv(dev);
+       struct stm32_ltdc_priv *priv = dev_get_priv(dev);
+       struct udevice *panel;
+       struct clk pclk, pxclk;
+       int ret;
+
+       priv->regs = (void *)dev_read_addr(dev);
+       if ((fdt_addr_t)priv->regs == FDT_ADDR_T_NONE) {
+               debug("%s: ltdc dt register address error\n", __func__);
+               return -EINVAL;
+       }
+
+       ret = uclass_first_device(UCLASS_PANEL, &panel);
+       if (ret) {
+               debug("%s: panel device error %d\n", __func__, ret);
+               return ret;
+       }
+
+       ret = panel_enable_backlight(panel);
+       if (ret) {
+               debug("%s: panel %s enable backlight error %d\n",
+                     __func__, panel->name, ret);
+               return ret;
+       }
+
+       ret = fdtdec_decode_display_timing(gd->fdt_blob, dev_of_offset(dev),
+                                          0, &priv->timing);
+       if (ret) {
+               debug("%s: decode display timing error %d\n", __func__, ret);
+               return -EINVAL;
+       }
+
+       ret = clk_get_by_name(dev, "pclk", &pclk);
+       if (ret) {
+               debug("%s: peripheral clock get error %d\n", __func__, ret);
+               return ret;
+       }
+
+       ret = clk_enable(&pclk);
+       if (ret) {
+               debug("%s: peripheral clock enable error %d\n", __func__, ret);
+               return ret;
+       }
+
+       /* Verify pixel clock value if any & inform user accordingly */
+       ret = clk_get_by_name(dev, "pxclk", &pxclk);
+       if (!ret) {
+               if (clk_get_rate(&pxclk) != priv->timing.pixelclock.typ)
+                       printf("Warning: please adjust ltdc pixel clock\n");
+       }
+
+       /* TODO Below parameters are hard-coded for the moment... */
+       priv->l2bpp = VIDEO_BPP16;
+       priv->bg_col_argb = 0xFFFFFFFF; /* white no transparency */
+       priv->crop_x = 0;
+       priv->crop_y = 0;
+       priv->crop_w = priv->timing.hactive.typ;
+       priv->crop_h = priv->timing.vactive.typ;
+       priv->alpha = 0xFF;
+
+       debug("%s: %dx%d %dbpp frame buffer at 0x%lx\n", __func__,
+             priv->timing.hactive.typ, priv->timing.vactive.typ,
+             VNBITS(priv->l2bpp), uc_plat->base);
+       debug("%s: crop %d,%d %dx%d bg 0x%08x alpha %d\n", __func__,
+             priv->crop_x, priv->crop_y, priv->crop_w, priv->crop_h,
+             priv->bg_col_argb, priv->alpha);
+
+       /* Configure & start LTDC */
+       stm32_ltdc_set_mode(priv);
+       stm32_ltdc_set_layer1(priv, uc_plat->base);
+       stm32_ltdc_enable(priv);
+
+       uc_priv->xsize = priv->timing.hactive.typ;
+       uc_priv->ysize = priv->timing.vactive.typ;
+       uc_priv->bpix = priv->l2bpp;
+
+       video_set_flush_dcache(dev, true);
+
+       return 0;
+}
+
+static int stm32_ltdc_bind(struct udevice *dev)
+{
+       struct video_uc_platdata *uc_plat = dev_get_uclass_platdata(dev);
+
+       uc_plat->size = CONFIG_VIDEO_STM32_MAX_XRES *
+                       CONFIG_VIDEO_STM32_MAX_YRES *
+                       (CONFIG_VIDEO_STM32_MAX_BPP >> 3);
+       debug("%s: frame buffer max size %d bytes\n", __func__, uc_plat->size);
+
+       return 0;
+}
+
+static const struct udevice_id stm32_ltdc_ids[] = {
+       { .compatible = "st,stm32-ltdc" },
+       { }
+};
+
+U_BOOT_DRIVER(stm32_ltdc) = {
+       .name   = "stm32_ltdc",
+       .id     = UCLASS_VIDEO,
+       .of_match = stm32_ltdc_ids,
+       .probe  = stm32_ltdc_probe,
+       .bind   = stm32_ltdc_bind,
+       .priv_auto_alloc_size   = sizeof(struct stm32_ltdc_priv),
+};
index 3036e3a1f25f054617bbf5852f762268bf72027e..dfa39b0d1b893ad774e0fa35bb57760b34bf8973 100644 (file)
@@ -199,7 +199,9 @@ static int video_post_probe(struct udevice *dev)
 #else
        priv->colour_bg = 0xffffff;
 #endif
-       video_clear(dev);
+
+       if (!CONFIG_IS_ENABLED(NO_FB_CLEAR))
+               video_clear(dev);
 
        /*
         * Create a text console device. For now we always do this, although