]> git.sur5r.net Git - u-boot/commitdiff
USB: EHCI: Allow EHCI post-powerup configuration in board files
authorMarek Vasut <marek.vasut@gmail.com>
Mon, 11 Jul 2011 00:37:01 +0000 (02:37 +0200)
committerRemy Bohmer <linux@bohmer.net>
Sun, 11 Dec 2011 13:50:03 +0000 (14:50 +0100)
This patch allows USB to work on some hosts, which need additional frobing after
the host was powered up via regular USB powerup sequence.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Wolfgang Grandegger <wg@denx.de>
Cc: Jason Liu <r64343@freescale.com>
drivers/usb/host/ehci-hcd.c

index 1cee158b0189f798d6ed8ac3c82df4d935890b44..3f7bc2cef6ba1c96a1563b9c295f59263d0069f9 100644 (file)
@@ -205,6 +205,14 @@ static inline void ehci_invalidate_dcache(struct QH *qh)
 }
 #endif /* CONFIG_EHCI_DCACHE */
 
+void __ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg)
+{
+       mdelay(50);
+}
+
+void ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg)
+       __attribute__((weak, alias("__ehci_powerup_fixup")));
+
 static int handshake(uint32_t *ptr, uint32_t mask, uint32_t done, int usec)
 {
        uint32_t result;
@@ -713,8 +721,8 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
                                 * usb 2.0 specification say 50 ms resets on
                                 * root
                                 */
-                               wait_ms(50);
-                               /* terminate the reset */
+                               ehci_powerup_fixup(status_reg, &reg);
+
                                ehci_writel(status_reg, reg & ~EHCI_PS_PR);
                                /*
                                 * A host controller must terminate the reset