]> git.sur5r.net Git - u-boot/commitdiff
omap3: zoom1: disable JFFS2 and enable FS_GENERIC
authorNishanth Menon <nm@ti.com>
Tue, 8 Apr 2014 14:50:55 +0000 (09:50 -0500)
committerTom Rini <trini@ti.com>
Thu, 17 Apr 2014 21:24:39 +0000 (17:24 -0400)
This is more in line with commits
664979a2a9f764b63b8094458b87247d254b0cc1(omap3_beagle: remove JFFS2
support.) and 102ce9ea7afdda80fe25aa786975e1722196bdb9 (omap3_beagle:
enable CMD_FS_GENERIC and simplify load of image/ramdisk)

CMD_FS_GENERIC allows us to simplify where we load up our image from
either from ext2/fat etc. So, lets use that instead of cumbersome
options we'd have to use. Sticking with existing conventions,
defaults will be:
bootfile=uImage
bootpart=0:1 (first partition)
bootdir=/ (/ in first partition)

Signed-off-by: Nishanth Menon <nm@ti.com>
include/configs/omap3_zoom1.h

index 4fb36287086d303f386abc32ab0259a7542b2399..110e3db9ddb6adec744c39b4e56736dab29e826d 100644 (file)
 
 #define CONFIG_CMD_EXT2                /* EXT2 Support                 */
 #define CONFIG_CMD_FAT         /* FAT support                  */
-#define CONFIG_CMD_JFFS2       /* JFFS2 Support                */
+#define CONFIG_CMD_FS_GENERIC  /* Generic FS support */
+#define CONFIG_CMD_MTDPARTS    /* Enable MTD parts commands */
+#define CONFIG_MTD_DEVICE      /* needed for mtdparts commands */
+#define MTDIDS_DEFAULT                 "nand0=nand"
+#define MTDPARTS_DEFAULT               "mtdparts=nand:512k(x-loader),"\
+                                       "1920k(u-boot),128k(u-boot-env),"\
+                                       "4m(kernel),-(fs)"
 
 #define CONFIG_CMD_I2C         /* I2C serial bus support       */
 #define CONFIG_CMD_MMC         /* MMC support                  */
                                                        /* CS0 */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1               /* Max number of NAND */
                                                        /* devices */
-#define CONFIG_JFFS2_NAND
-/* nand device jffs2 lives on */
-#define CONFIG_JFFS2_DEV               "nand0"
-/* start of jffs2 partition */
-#define CONFIG_JFFS2_PART_OFFSET       0x680000
-#define CONFIG_JFFS2_PART_SIZE         0xf980000       /* size of jffs2 */
-                                                       /* partition */
 
 /* Environment information */
 #define CONFIG_BOOTDELAY               10
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "loadaddr=0x82000000\0" \
+       "bootfile=uImage\0" \
+       "bootdir=/\0" \
+       "bootpart=0:1\0" \
        "usbtty=cdc_acm\0" \
        "console=ttyS2,115200n8\0" \
        "mmcdev=0\0" \
        "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
        "bootscript=echo Running bootscript from mmc ...; " \
                "source ${loadaddr}\0" \
-       "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+       "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
        "mmcboot=echo Booting from mmc ...; " \
                "run mmcargs; " \
                "bootm ${loadaddr}\0" \
                "if run loadbootscript; then " \
                        "run bootscript; " \
                "else " \
-                       "if run loaduimage; then " \
+                       "if run loadimage; then " \
                                "run mmcboot; " \
                        "else run nandboot; " \
                        "fi; " \