]> git.sur5r.net Git - u-boot/commitdiff
net/phy/cortina: Add support for CS4223 PHY
authorVicentiu Galanopulo <vicentiu.galanopulo@nxp.com>
Wed, 2 May 2018 11:23:38 +0000 (06:23 -0500)
committerJoe Hershberger <joe.hershberger@ni.com>
Wed, 13 Jun 2018 18:54:15 +0000 (13:54 -0500)
Add support for Cortina CS4223 10G PHY
  - As per the CS4223 specs, an EEPROM module is
    connected to the PHY. At startup the PHY reads
    the firmware line and tries to load the firmware
    into the internal memory.
  - This driver reads the EEPROM status
    and checks if firmware has been loaded

Signed-off-by: Vicentiu Galanopulo <vicentiu.galanopulo@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
drivers/net/phy/cortina.c
include/cortina.h
include/phy.h

index 9b60d1aac5f22574e3837b6ded95905e799c93b1..a04a118f900d5ec295edd8b8bc1aad32b7140569 100644 (file)
@@ -284,6 +284,38 @@ int cs4340_startup(struct phy_device *phydev)
        return 0;
 }
 
+int cs4223_phy_init(struct phy_device *phydev)
+{
+       int reg_value;
+
+       reg_value = phy_read(phydev, 0x00, CS4223_EEPROM_STATUS);
+       if (!(reg_value & CS4223_EEPROM_FIRMWARE_LOADDONE)) {
+               printf("%s CS4223 Firmware not present in EERPOM\n", __func__);
+               return -ENOSYS;
+       }
+
+       return 0;
+}
+
+int cs4223_config(struct phy_device *phydev)
+{
+       return cs4223_phy_init(phydev);
+}
+
+int cs4223_probe(struct phy_device *phydev)
+{
+       phydev->flags = PHY_FLAG_BROKEN_RESET;
+       return 0;
+}
+
+int cs4223_startup(struct phy_device *phydev)
+{
+       phydev->link = 1;
+       phydev->speed = SPEED_10000;
+       phydev->duplex = DUPLEX_FULL;
+       return 0;
+}
+
 struct phy_driver cs4340_driver = {
        .name = "Cortina CS4315/CS4340",
        .uid = PHY_UID_CS4340,
@@ -298,9 +330,23 @@ struct phy_driver cs4340_driver = {
        .shutdown = &gen10g_shutdown,
 };
 
+struct phy_driver cs4223_driver = {
+       .name = "Cortina CS4223",
+       .uid = PHY_UID_CS4223,
+       .mask = 0x0ffff00f,
+       .features = PHY_10G_FEATURES,
+       .mmds = (MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS |
+                MDIO_DEVS_AN),
+       .config = &cs4223_config,
+       .probe  = &cs4223_probe,
+       .startup = &cs4223_startup,
+       .shutdown = &gen10g_shutdown,
+};
+
 int phy_cortina_init(void)
 {
        phy_register(&cs4340_driver);
+       phy_register(&cs4223_driver);
        return 0;
 }
 
@@ -319,7 +365,7 @@ int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id)
                return -EIO;
        *phy_id |= (phy_reg & 0xffff);
 
-       if (*phy_id == PHY_UID_CS4340)
+       if ((*phy_id == PHY_UID_CS4340) || (*phy_id == PHY_UID_CS4223))
                return 0;
 
        /*
index 4cb09855198f4c6688162e880067fc125710747d..ba7fafe9c4da81fe60f1c3d514a66c01263c7903 100644 (file)
 #define VILLA_LINE_SDS_COMMON_STX0_TX_OUTPUT_CTRLA 0x427
 #define VILLA_LINE_SDS_COMMON_STX0_TX_OUTPUT_CTRLB 0x428
 
+/* Cortina CS4223 */
+#define CS4223_EEPROM_STATUS  0x5001
+#define CS4223_EEPROM_FIRMWARE_LOADDONE  0x1
+
 #define mseq_edc_bist_done (0x1<<0)
 #define mseq_edc_bist_fail (0x1<<8)
 
index 52bf99717c7e212eaa7edbe18721d926497af443..e8f10ab3d23f8df1fc77d643899324598de5ead6 100644 (file)
@@ -314,6 +314,7 @@ static inline bool phy_interface_is_sgmii(struct phy_device *phydev)
 
 /* PHY UIDs for various PHYs that are referenced in external code */
 #define PHY_UID_CS4340  0x13e51002
+#define PHY_UID_CS4223  0x03e57003
 #define PHY_UID_TN2020 0x00a19410
 
 #endif