]> git.sur5r.net Git - u-boot/commitdiff
cfi_flash: Fix spacing around casts/operators
authorMario Six <mario.six@gdsys.cc>
Fri, 26 Jan 2018 13:43:36 +0000 (14:43 +0100)
committerStefan Roese <sr@denx.de>
Mon, 29 Jan 2018 06:48:58 +0000 (07:48 +0100)
There should be spaces around operators, and no spaces between a cast
and the variable its being applied to. Fix all instances where this
occurs.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Signed-off-by: Stefan Roese <sr@denx.de>
drivers/mtd/cfi_flash.c

index b77fd3c0a2da8df0e8dfe9d6c0fb8816a0fac555..0d58914e44ad01464a923c93db05434e56b9e3e6 100644 (file)
@@ -231,7 +231,7 @@ static void flash_make_cmd(flash_info_t *info, u32 cmd, void *cmdbuf)
        uchar *cp = (uchar *) cmdbuf;
 
        for (i = info->portwidth; i > 0; i--) {
-               cword_offset = (info->portwidth-i)%info->chipwidth;
+               cword_offset = (info->portwidth - i) % info->chipwidth;
 #if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
                cp_offset = info->portwidth - i;
                val = *((uchar *)&cmd_le + cword_offset);
@@ -252,7 +252,7 @@ static void print_longlong(char *str, unsigned long long data)
        int i;
        char *cp;
 
-       cp = (char *) &data;
+       cp = (char *)&data;
        for (i = 0; i < 8; i++)
                sprintf(&str[i * 2], "%2.2x", *cp++);
 }
@@ -512,7 +512,7 @@ static int flash_toggle(flash_info_t *info, flash_sect_t sect,
                break;
        case FLASH_CFI_64BIT:
                retval = ((flash_read32(addr) != flash_read32(addr)) ||
-                          (flash_read32(addr+4) != flash_read32(addr+4)));
+                          (flash_read32(addr + 4) != flash_read32(addr + 4)));
                break;
        default:
                retval = 0;
@@ -1212,7 +1212,7 @@ void flash_print_info(flash_info_t *info)
        printf("%s flash (%d x %d)",
                info->name,
                (info->portwidth << 3), (info->chipwidth << 3));
-       if (info->size < 1024*1024)
+       if (info->size < 1024 * 1024)
                printf("  Size: %ld kB in %d Sectors\n",
                        info->size >> 10, info->sector_count);
        else
@@ -1888,7 +1888,7 @@ static void __flash_cmd_reset(flash_info_t *info)
        flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
 }
 void flash_cmd_reset(flash_info_t *info)
-       __attribute__((weak,alias("__flash_cmd_reset")));
+       __attribute__((weak, alias("__flash_cmd_reset")));
 
 static int __flash_detect_cfi(flash_info_t *info, struct cfi_qry *qry)
 {
@@ -2035,7 +2035,7 @@ static void flash_fixup_sst(flash_info_t *info, struct cfi_qry *qry)
        if (info->device_id == 0x5D23 || /* SST39VF3201B */
            info->device_id == 0x5C23) { /* SST39VF3202B */
                /* set sector granularity to 4KB */
-               info->cmd_erase_sector=0x50;
+               info->cmd_erase_sector = 0x50;
        }
 }
 
@@ -2093,9 +2093,9 @@ ulong flash_get_size(phys_addr_t base, int banknum)
                num_erase_regions = qry.num_erase_regions;
 
                if (info->ext_addr) {
-                       info->cfi_version = (ushort) flash_read_uchar(info,
+                       info->cfi_version = (ushort)flash_read_uchar(info,
                                                info->ext_addr + 3) << 8;
-                       info->cfi_version |= (ushort) flash_read_uchar(info,
+                       info->cfi_version |= (ushort)flash_read_uchar(info,
                                                info->ext_addr + 4);
                }
 
@@ -2392,7 +2392,7 @@ unsigned long flash_init(void)
 #ifndef CONFIG_SYS_FLASH_QUIET_TEST
                        printf("## Unknown flash on Bank %d "
                                "- Size = 0x%08lx = %ld MB\n",
-                               i+1, flash_info[i].size,
+                               i + 1, flash_info[i].size,
                                flash_info[i].size >> 20);
 #endif /* CONFIG_SYS_FLASH_QUIET_TEST */
                }