]> git.sur5r.net Git - u-boot/commitdiff
clk: rockchip: Add rk3328 gamc clock support
authorDavid Wu <david.wu@rock-chips.com>
Sat, 13 Jan 2018 06:02:36 +0000 (14:02 +0800)
committerPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Sun, 28 Jan 2018 16:12:37 +0000 (17:12 +0100)
The rk3328 soc has two gmac controllers, one is gmac2io,
the other is gmac2phy. We use the gmac2io rgmii interface
for 1000M phy here.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
drivers/clk/rockchip/clk_rk3328.c
include/dt-bindings/clock/rk3328-cru.h

index fa0c777044b397877ce6331d57576d94cb183667..2ccc79851c58988cb19382a688df02426c5e4de1 100644 (file)
@@ -13,6 +13,7 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/cru_rk3328.h>
 #include <asm/arch/hardware.h>
+#include <asm/arch/grf_rk3328.h>
 #include <asm/io.h>
 #include <dm/lists.h>
 #include <dt-bindings/clock/rk3328-cru.h>
@@ -94,6 +95,14 @@ enum {
        PCLK_DBG_DIV_SHIFT              = 0,
        PCLK_DBG_DIV_MASK               = 0xF << PCLK_DBG_DIV_SHIFT,
 
+       /* CLKSEL_CON27 */
+       GMAC2IO_PLL_SEL_SHIFT           = 7,
+       GMAC2IO_PLL_SEL_MASK            = 1 << GMAC2IO_PLL_SEL_SHIFT,
+       GMAC2IO_PLL_SEL_CPLL            = 0,
+       GMAC2IO_PLL_SEL_GPLL            = 1,
+       GMAC2IO_CLK_DIV_MASK            = 0x1f,
+       GMAC2IO_CLK_DIV_SHIFT           = 0,
+
        /* CLKSEL_CON28 */
        ACLK_PERIHP_PLL_SEL_CPLL        = 0,
        ACLK_PERIHP_PLL_SEL_GPLL,
@@ -393,6 +402,44 @@ static ulong rk3328_i2c_set_clk(struct rk3328_cru *cru, ulong clk_id, uint hz)
        return DIV_TO_RATE(GPLL_HZ, src_clk_div);
 }
 
+static ulong rk3328_gmac2io_set_clk(struct rk3328_cru *cru, ulong rate)
+{
+       struct rk3328_grf_regs *grf;
+       ulong ret;
+
+       grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+
+       /*
+        * The RGMII CLK can be derived either from an external "clkin"
+        * or can be generated from internally by a divider from SCLK_MAC.
+        */
+       if (readl(&grf->mac_con[1]) & BIT(10) &&
+           readl(&grf->soc_con[4]) & BIT(14)) {
+               /* An external clock will always generate the right rate... */
+               ret = rate;
+       } else {
+               u32 con = readl(&cru->clksel_con[27]);
+               ulong pll_rate;
+               u8 div;
+
+               if ((con >> GMAC2IO_PLL_SEL_SHIFT) & GMAC2IO_PLL_SEL_GPLL)
+                       pll_rate = GPLL_HZ;
+               else
+                       pll_rate = CPLL_HZ;
+
+               div = DIV_ROUND_UP(pll_rate, rate) - 1;
+               if (div <= 0x1f)
+                       rk_clrsetreg(&cru->clksel_con[27], GMAC2IO_CLK_DIV_MASK,
+                                    div << GMAC2IO_CLK_DIV_SHIFT);
+               else
+                       debug("Unsupported div for gmac:%d\n", div);
+
+               return DIV_TO_RATE(pll_rate, div);
+       }
+
+       return ret;
+}
+
 static ulong rk3328_mmc_get_clk(struct rk3328_cru *cru, uint clk_id)
 {
        u32 div, con, con_id;
@@ -558,12 +605,48 @@ static ulong rk3328_clk_set_rate(struct clk *clk, ulong rate)
        case SCLK_I2C3:
                ret = rk3328_i2c_set_clk(priv->cru, clk->id, rate);
                break;
+       case SCLK_MAC2IO:
+               ret = rk3328_gmac2io_set_clk(priv->cru, rate);
+               break;
        case SCLK_PWM:
                ret = rk3328_pwm_set_clk(priv->cru, rate);
                break;
        case SCLK_SARADC:
                ret = rk3328_saradc_set_clk(priv->cru, rate);
                break;
+       case DCLK_LCDC:
+       case SCLK_PDM:
+       case SCLK_RTC32K:
+       case SCLK_UART0:
+       case SCLK_UART1:
+       case SCLK_UART2:
+       case SCLK_SDIO:
+       case SCLK_TSP:
+       case SCLK_WIFI:
+       case ACLK_BUS_PRE:
+       case HCLK_BUS_PRE:
+       case PCLK_BUS_PRE:
+       case ACLK_PERI_PRE:
+       case HCLK_PERI:
+       case PCLK_PERI:
+       case ACLK_VIO_PRE:
+       case HCLK_VIO_PRE:
+       case ACLK_RGA_PRE:
+       case SCLK_RGA:
+       case ACLK_VOP_PRE:
+       case ACLK_RKVDEC_PRE:
+       case ACLK_RKVENC:
+       case ACLK_VPU_PRE:
+       case SCLK_VDEC_CABAC:
+       case SCLK_VDEC_CORE:
+       case SCLK_VENC_CORE:
+       case SCLK_VENC_DSP:
+       case SCLK_EFUSE:
+       case PCLK_DDR:
+       case ACLK_GMAC:
+       case PCLK_GMAC:
+       case SCLK_USB3OTG_SUSPEND:
+               return 0;
        default:
                return -ENOENT;
        }
@@ -571,9 +654,104 @@ static ulong rk3328_clk_set_rate(struct clk *clk, ulong rate)
        return ret;
 }
 
+static int rk3328_gmac2io_set_parent(struct clk *clk, struct clk *parent)
+{
+       struct rk3328_grf_regs *grf;
+       const char *clock_output_name;
+       int ret;
+
+       grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+
+       /*
+        * If the requested parent is in the same clock-controller and the id
+        * is SCLK_MAC2IO_SRC ("clk_mac2io_src"), switch to the internal clock.
+        */
+       if ((parent->dev == clk->dev) && (parent->id == SCLK_MAC2IO_SRC)) {
+               debug("%s: switching RGMII to SCLK_MAC2IO_SRC\n", __func__);
+               rk_clrreg(&grf->mac_con[1], BIT(10));
+               return 0;
+       }
+
+       /*
+        * Otherwise, we need to check the clock-output-names of the
+        * requested parent to see if the requested id is "gmac_clkin".
+        */
+       ret = dev_read_string_index(parent->dev, "clock-output-names",
+                                   parent->id, &clock_output_name);
+       if (ret < 0)
+               return -ENODATA;
+
+       /* If this is "gmac_clkin", switch to the external clock input */
+       if (!strcmp(clock_output_name, "gmac_clkin")) {
+               debug("%s: switching RGMII to CLKIN\n", __func__);
+               rk_setreg(&grf->mac_con[1], BIT(10));
+               return 0;
+       }
+
+       return -EINVAL;
+}
+
+static int rk3328_gmac2io_ext_set_parent(struct clk *clk, struct clk *parent)
+{
+       struct rk3328_grf_regs *grf;
+       const char *clock_output_name;
+       int ret;
+
+       grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+
+       /*
+        * If the requested parent is in the same clock-controller and the id
+        * is SCLK_MAC2IO ("clk_mac2io"), switch to the internal clock.
+        */
+       if ((parent->dev == clk->dev) && (parent->id == SCLK_MAC2IO)) {
+               debug("%s: switching RGMII to SCLK_MAC2IO\n", __func__);
+               rk_clrreg(&grf->soc_con[4], BIT(14));
+               return 0;
+       }
+
+       /*
+        * Otherwise, we need to check the clock-output-names of the
+        * requested parent to see if the requested id is "gmac_clkin".
+        */
+       ret = dev_read_string_index(parent->dev, "clock-output-names",
+                                   parent->id, &clock_output_name);
+       if (ret < 0)
+               return -ENODATA;
+
+       /* If this is "gmac_clkin", switch to the external clock input */
+       if (!strcmp(clock_output_name, "gmac_clkin")) {
+               debug("%s: switching RGMII to CLKIN\n", __func__);
+               rk_setreg(&grf->soc_con[4], BIT(14));
+               return 0;
+       }
+
+       return -EINVAL;
+}
+
+static int rk3328_clk_set_parent(struct clk *clk, struct clk *parent)
+{
+       switch (clk->id) {
+       case SCLK_MAC2IO:
+               return rk3328_gmac2io_set_parent(clk, parent);
+       case SCLK_MAC2IO_EXT:
+               return rk3328_gmac2io_ext_set_parent(clk, parent);
+       case DCLK_LCDC:
+       case SCLK_PDM:
+       case SCLK_RTC32K:
+       case SCLK_UART0:
+       case SCLK_UART1:
+       case SCLK_UART2:
+               return 0;
+       }
+
+       debug("%s: unsupported clk %ld\n", __func__, clk->id);
+       return -ENOENT;
+}
+
 static struct clk_ops rk3328_clk_ops = {
        .get_rate = rk3328_clk_get_rate,
        .set_rate = rk3328_clk_set_rate,
+       .set_parent = rk3328_clk_set_parent,
 };
 
 static int rk3328_clk_probe(struct udevice *dev)
index 6d8bf1330bade01203deb35f3b2c2e9e3b6b0902..cdc0b338aa6d03bdceaeb280ad2b5b661aed5a76 100644 (file)
@@ -86,6 +86,9 @@
 #define SCLK_USB3OTG_SUSPEND   97
 #define SCLK_REF_USB3OTG_SRC   98
 #define SCLK_MAC2IO_SRC                99
+#define SCLK_MAC2IO            100
+#define SCLK_MAC2PHY           101
+#define SCLK_MAC2IO_EXT                102
 
 /* dclk gates */
 #define DCLK_LCDC              180
 
 #define CLK_NR_CLKS            (HCLK_HDCP + 1)
 
-#define SCLK_MAC2IO            0
-#define SCLK_MAC2PHY           1
-
 #define CLKGRF_NR_CLKS         (SCLK_MAC2PHY + 1)
 
 /* soft-reset indices */