]> git.sur5r.net Git - u-boot/commitdiff
Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
authorroy zang <tie-fei.zang@freescale.com>
Thu, 2 Nov 2006 10:59:15 +0000 (18:59 +0800)
committerZang Tiefei <roy@bus.ap.freescale.net>
Thu, 2 Nov 2006 10:59:15 +0000 (18:59 +0800)
mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.

Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
board/mpc7448hpc2/mpc7448hpc2.c [new file with mode: 0644]
board/mpc7448hpc2/tsi108_init.c [new file with mode: 0644]

diff --git a/board/mpc7448hpc2/mpc7448hpc2.c b/board/mpc7448hpc2/mpc7448hpc2.c
new file mode 100644 (file)
index 0000000..f90a751
--- /dev/null
@@ -0,0 +1,489 @@
+/*
+ * (C) Copyright 2005 Freescale Semiconductor, Inc.
+ *
+ * Roy Zang <tie-fei.zang@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * modifications for the Tsi108 Emul Board by avb@Tundra
+ */
+
+/*
+ * board support/init functions for the 
+ * Freescale MPC7448 HPC2 (High-Performance Computing 2 Platform).
+ */
+
+#include <common.h>
+#include <74xx_7xx.h>
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+extern void ft_cpu_setup(void *blob, bd_t *bd);
+#endif
+
+#undef DEBUG
+
+extern void flush_data_cache(void);
+extern void invalidate_l1_instruction_cache(void);
+extern void tsi108_init_f(void);
+
+int display_mem_map(void);
+
+void after_reloc(ulong dest_addr)
+{
+       DECLARE_GLOBAL_DATA_PTR;
+       
+       /*
+        * Jump to the main U-Boot board init code
+        */
+       board_init_r((gd_t *) gd, dest_addr);
+       /* NOTREACHED */
+}
+
+/*
+ * Check Board Identity:
+ *
+ * report board type
+ */
+
+int checkboard(void)
+{
+       int l_type = 0;
+
+       printf("BOARD: %s\n", CFG_BOARD_NAME);
+       return (l_type);
+}
+
+/*
+ * Read Processor ID:
+ *
+ * report calling processor number
+ */
+
+int read_pid(void)
+{
+       return 0;               /* we are on single CPU platform for a while */
+}
+
+long int dram_size(int board_type)
+{
+       return 0x20000000;      /* 256M bytes */
+}
+
+long int initdram(int board_type)
+{
+       return dram_size(board_type);
+}
+
+/* DRAM check routines copied from gw8260 */
+
+#if defined (CFG_DRAM_TEST)
+
+/*********************************************************************/
+/* NAME:  move64() -  moves a double word (64-bit)                  */
+/*                                                                  */
+/* DESCRIPTION:                                                             */
+/*   this function performs a double word move from the data at             */
+/*   the source pointer to the location at the destination pointer.  */
+/*                                                                  */
+/* INPUTS:                                                          */
+/*   unsigned long long *src  - pointer to data to move                     */
+/*                                                                  */
+/* OUTPUTS:                                                         */
+/*   unsigned long long *dest - pointer to locate to move data      */
+/*                                                                  */
+/* RETURNS:                                                         */
+/*   None                                                           */
+/*                                                                  */
+/* RESTRICTIONS/LIMITATIONS:                                        */
+/*   May cloober fr0.                                               */
+/*                                                                  */
+/*********************************************************************/
+static void move64(unsigned long long *src, unsigned long long *dest)
+{
+       asm("lfd  0, 0(3)\n\t"  /* fpr0   =  *scr       */
+           "stfd 0, 0(4)"      /* *dest  =  fpr0       */
+      : : :"fr0");             /* Clobbers fr0         */
+       return;
+}
+
+#if defined (CFG_DRAM_TEST_DATA)
+
+unsigned long long pattern[] = {
+       0xaaaaaaaaaaaaaaaaULL,
+       0xccccccccccccccccULL,
+       0xf0f0f0f0f0f0f0f0ULL,
+       0xff00ff00ff00ff00ULL,
+       0xffff0000ffff0000ULL,
+       0xffffffff00000000ULL,
+       0x00000000ffffffffULL,
+       0x0000ffff0000ffffULL,
+       0x00ff00ff00ff00ffULL,
+       0x0f0f0f0f0f0f0f0fULL,
+       0x3333333333333333ULL,
+       0x5555555555555555ULL
+};
+
+/*********************************************************************/
+/* NAME:  mem_test_data() -  test data lines for shorts and opens    */
+/*                                                                  */
+/* DESCRIPTION:                                                             */
+/*   Tests data lines for shorts and opens by forcing adjacent data  */
+/*   to opposite states. Because the data lines could be routed in   */
+/*   an arbitrary manner the must ensure test patterns ensure that   */
+/*   every case is tested. By using the following series of binary   */
+/*   patterns every combination of adjacent bits is test regardless  */
+/*   of routing.                                                    */
+/*                                                                  */
+/*     ...101010101010101010101010                                  */
+/*     ...110011001100110011001100                                  */
+/*     ...111100001111000011110000                                  */
+/*     ...111111110000000011111111                                  */
+/*                                                                  */
+/*   Carrying this out, gives us six hex patterns as follows:       */
+/*                                                                  */
+/*     0xaaaaaaaaaaaaaaaa                                           */
+/*     0xcccccccccccccccc                                           */
+/*     0xf0f0f0f0f0f0f0f0                                           */
+/*     0xff00ff00ff00ff00                                           */
+/*     0xffff0000ffff0000                                           */
+/*     0xffffffff00000000                                           */
+/*                                                                  */
+/*   The number test patterns will always be given by:              */
+/*                                                                  */
+/*   log(base 2)(number data bits) = log2 (64) = 6                  */
+/*                                                                  */
+/*   To test for short and opens to other signals on our boards. we  */
+/*   simply                                                         */
+/*   test with the 1's complemnt of the paterns as well.            */
+/*                                                                  */
+/* OUTPUTS:                                                         */
+/*   Displays failing test pattern                                  */
+/*                                                                  */
+/* RETURNS:                                                         */
+/*   0 -  Passed test                                               */
+/*   1 -  Failed test                                               */
+/*                                                                  */
+/* RESTRICTIONS/LIMITATIONS:                                        */
+/*  Assumes only one one SDRAM bank                                 */
+/*                                                                  */
+/*********************************************************************/
+int mem_test_data(void)
+{
+       unsigned long long *pmem = (unsigned long long *)CFG_MEMTEST_START;
+       unsigned long long temp64;
+       int num_patterns = sizeof(pattern) / sizeof(pattern[0]);
+       int i;
+       unsigned int hi, lo;
+
+       for (i = 0; i < num_patterns; i++) {
+               move64(&(pattern[i]), pmem);
+               move64(pmem, &temp64);
+
+               /* hi = (temp64>>32) & 0xffffffff;          */
+               /* lo = temp64 & 0xffffffff;                */
+               /* printf("\ntemp64 = 0x%08x%08x", hi, lo); */
+
+               hi = (pattern[i] >> 32) & 0xffffffff;
+               lo = pattern[i] & 0xffffffff;
+               /* printf("\npattern[%d] = 0x%08x%08x", i, hi, lo);  */
+
+               if (temp64 != pattern[i]) {
+                       printf("\n   Data Test Failed, pattern 0x%08x%08x",
+                              hi, lo);
+                       return 1;
+               }
+       }
+
+       return 0;
+}
+#endif /* CFG_DRAM_TEST_DATA */
+
+#if defined (CFG_DRAM_TEST_ADDRESS)
+/*********************************************************************/
+/* NAME:  mem_test_address() - test address lines                   */
+/*                                                                  */
+/* DESCRIPTION:                                                             */
+/*   This function performs a test to verify that each word im      */
+/*   memory is uniquly addressable. The test sequence is as follows: */
+/*                                                                  */
+/*   1) write the address of each word to each word.                */
+/*   2) verify that each location equals its address                */
+/*                                                                  */
+/* OUTPUTS:                                                         */
+/*   Displays failing test pattern and address                      */
+/*                                                                  */
+/* RETURNS:                                                         */
+/*   0 -  Passed test                                               */
+/*   1 -  Failed test                                               */
+/*                                                                  */
+/* RESTRICTIONS/LIMITATIONS:                                        */
+/*                                                                  */
+/*                                                                  */
+/*********************************************************************/
+int mem_test_address(void)
+{
+       volatile unsigned int *pmem =
+           (volatile unsigned int *)CFG_MEMTEST_START;
+       const unsigned int size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 4;
+       unsigned int i;
+
+       /* write address to each location */
+       for (i = 0; i < size; i++) {
+               pmem[i] = i;
+       }
+
+       /* verify each loaction */
+       for (i = 0; i < size; i++) {
+               if (pmem[i] != i) {
+                       printf("\n   Address Test Failed at 0x%x", i);
+                       return 1;
+               }
+       }
+       return 0;
+}
+#endif                         /* CFG_DRAM_TEST_ADDRESS */
+
+#if defined (CFG_DRAM_TEST_WALK)
+/*********************************************************************/
+/* NAME:   mem_march() -  memory march                              */
+/*                                                                  */
+/* DESCRIPTION:                                                             */
+/*   Marches up through memory. At each location verifies rmask if   */
+/*   read = 1. At each location write wmask if write = 1. Displays  */
+/*   failing address and pattern.                                   */
+/*                                                                  */
+/* INPUTS:                                                          */
+/*   volatile unsigned long long * base - start address of test             */
+/*   unsigned int size - number of dwords(64-bit) to test           */
+/*   unsigned long long rmask - read verify mask                    */
+/*   unsigned long long wmask - wrtie verify mask                   */
+/*   short read - verifies rmask if read = 1                        */
+/*   short write  - writes wmask if write = 1                       */
+/*                                                                  */
+/* OUTPUTS:                                                         */
+/*   Displays failing test pattern and address                      */
+/*                                                                  */
+/* RETURNS:                                                         */
+/*   0 -  Passed test                                               */
+/*   1 -  Failed test                                               */
+/*                                                                  */
+/* RESTRICTIONS/LIMITATIONS:                                        */
+/*                                                                  */
+/*                                                                  */
+/*********************************************************************/
+int mem_march(volatile unsigned long long *base,
+             unsigned int size,
+             unsigned long long rmask,
+             unsigned long long wmask, short read, short write)
+{
+       unsigned int i;
+       unsigned long long temp;
+       unsigned int hitemp, lotemp, himask, lomask;
+
+       for (i = 0; i < size; i++) {
+               if (read != 0) {
+                       /* temp = base[i]; */
+                       move64((unsigned long long *)&(base[i]), &temp);
+                       if (rmask != temp) {
+                               hitemp = (temp >> 32) & 0xffffffff;
+                               lotemp = temp & 0xffffffff;
+                               himask = (rmask >> 32) & 0xffffffff;
+                               lomask = rmask & 0xffffffff;
+
+                               printf("\n Walking one's test failed:   \ 
+                                       address = 0x%08x," "\n\texpected \
+                                       0x%08x%08x, found 0x%08x%08x", i << 3,\
+                                       himask, lomask, hitemp, lotemp);
+                               return 1;
+                       }
+               }
+               if (write != 0) {
+                       /*  base[i] = wmask; */
+                       move64(&wmask, (unsigned long long *)&(base[i]));
+               }
+       }
+       return 0;
+}
+#endif                         /* CFG_DRAM_TEST_WALK */
+
+/*********************************************************************/
+/* NAME:   mem_test_walk() -  a simple walking ones test            */
+/*                                                                  */
+/* DESCRIPTION:                                                             */
+/*   Performs a walking ones through entire physical memory. The     */
+/*   test uses as series of memory marches, mem_march(), to verify   */
+/*   and write the test patterns to memory. The test sequence is as  */
+/*   follows:                                                       */
+/*     1) march writing 0000...0001                                 */
+/*     2) march verifying 0000...0001  , writing  0000...0010       */
+/*     3) repeat step 2 shifting masks left 1 bit each time unitl    */
+/*        the write mask equals 1000...0000                         */
+/*     4) march verifying 1000...0000                               */
+/*   The test fails if any of the memory marches return a failure.   */
+/*                                                                  */
+/* OUTPUTS:                                                         */
+/*   Displays which pass on the memory test is executing            */
+/*                                                                  */
+/* RETURNS:                                                         */
+/*   0 -  Passed test                                               */
+/*   1 -  Failed test                                               */
+/*                                                                  */
+/* RESTRICTIONS/LIMITATIONS:                                        */
+/*                                                                  */
+/*                                                                  */
+/*********************************************************************/
+int mem_test_walk(void)
+{
+       unsigned long long mask;
+       volatile unsigned long long *pmem =
+           (volatile unsigned long long *)CFG_MEMTEST_START;
+       const unsigned long size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 8;
+
+       unsigned int i;
+
+       mask = 0x01;
+
+       printf("Initial Pass");
+       mem_march(pmem, size, 0x0, 0x1, 0, 1);
+
+       printf("\b\b\b\b\b\b\b\b\b\b\b\b");
+       printf("                ");
+       printf("         ");
+       printf("\b\b\b\b\b\b\b\b\b\b\b\b");
+
+       for (i = 0; i < 63; i++) {
+               printf("Pass %2d", i + 2);
+               if (mem_march(pmem, size, mask, mask << 1, 1, 1) != 0) {
+                       /*printf("mask: 0x%x, pass: %d, ", mask, i); */
+                       return 1;
+               }
+               mask = mask << 1;
+               printf("\b\b\b\b\b\b\b");
+       }
+
+       printf("Last Pass");
+       if (mem_march(pmem, size, 0, mask, 0, 1) != 0) {
+               /* printf("mask: 0x%x", mask); */
+               return 1;
+       }
+       printf("\b\b\b\b\b\b\b\b\b");
+       printf("             ");
+       printf("\b\b\b\b\b\b\b\b\b");
+
+       return 0;
+}
+
+/*********************************************************************/
+/* NAME:    testdram() -  calls any enabled memory tests            */
+/*                                                                  */
+/* DESCRIPTION:                                                             */
+/*   Runs memory tests if the environment test variables are set to  */
+/*   'y'.                                                           */
+/*                                                                  */
+/* INPUTS:                                                          */
+/*   testdramdata    - If set to 'y', data test is run.                     */
+/*   testdramaddress - If set to 'y', address test is run.          */
+/*   testdramwalk    - If set to 'y', walking ones test is run      */
+/*                                                                  */
+/* OUTPUTS:                                                         */
+/*   None                                                           */
+/*                                                                  */
+/* RETURNS:                                                         */
+/*   0 -  Passed test                                               */
+/*   1 -  Failed test                                               */
+/*                                                                  */
+/* RESTRICTIONS/LIMITATIONS:                                        */
+/*                                                                  */
+/*                                                                  */
+/*********************************************************************/
+int testdram(void)
+{
+       char *s;
+       int rundata, runaddress, runwalk;
+
+       s = getenv("testdramdata");
+       rundata = (s && (*s == 'y')) ? 1 : 0;
+       s = getenv("testdramaddress");
+       runaddress = (s && (*s == 'y')) ? 1 : 0;
+       s = getenv("testdramwalk");
+       runwalk = (s && (*s == 'y')) ? 1 : 0;
+
+/*    rundata = 1; */
+/*    runaddress = 0; */
+/*    runwalk = 0; */
+
+       if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
+               printf("Testing RAM from 0x%08x to 0x%08x ...  \
+                       (don't panic... that will take a moment !!!!)\n", \
+                       CFG_MEMTEST_START, CFG_MEMTEST_END);
+       }
+#ifdef CFG_DRAM_TEST_DATA
+       if (rundata == 1) {
+               printf("Test DATA ...  ");
+               if (mem_test_data () == 1) {
+                       printf("failed \n");
+                       return 1;
+               } else
+                       printf("ok \n");
+       }
+#endif
+#ifdef CFG_DRAM_TEST_ADDRESS
+       if (runaddress == 1) {
+               printf("Test ADDRESS ...  ");
+               if (mem_test_address () == 1) {
+                       printf("failed \n");
+                       return 1;
+               } else
+                       printf("ok \n");
+       }
+#endif
+#ifdef CFG_DRAM_TEST_WALK
+       if (runwalk == 1) {
+               printf("Test WALKING ONEs ...  ");
+               if (mem_test_walk() == 1) {
+                       printf("failed \n");
+                       return 1;
+               } else
+                       printf("ok \n");
+       }
+#endif
+       if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
+               printf("passed\n");
+       }
+       return 0;
+
+}
+#endif /* CFG_DRAM_TEST */
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+       u32 *p;
+       int len;
+
+       ft_cpu_setup(blob, bd);
+
+       p = ft_get_prop(blob, "/memory/reg", &len);
+       if (p != NULL) {
+               *p++ = cpu_to_be32(bd->bi_memstart);
+               *p = cpu_to_be32(bd->bi_memsize);
+       }
+}
+#endif
diff --git a/board/mpc7448hpc2/tsi108_init.c b/board/mpc7448hpc2/tsi108_init.c
new file mode 100644 (file)
index 0000000..6f517f5
--- /dev/null
@@ -0,0 +1,662 @@
+/*****************************************************************************
+ * (C) Copyright 2003;  Tundra Semiconductor Corp.
+ * 
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *****************************************************************************/
+
+/*----------------------------------------------------------------------------
+ * FILENAME: tsi108_init.c
+ *
+ * Originator: Alex Bounine
+ *
+ * DESCRIPTION:
+ * Initialization code for the Tundra Tsi108 bridge chip
+ *---------------------------------------------------------------------------*/
+
+#include <common.h>
+#include <74xx_7xx.h>
+#include <config.h>
+#include <version.h>
+#include <asm/processor.h>
+#include <tsi108.h>
+
+extern void mpicInit(int verbose);
+
+/*
+ * Configuration Options
+ */
+
+typedef struct {
+       ulong upper;
+       ulong lower;
+} PB2OCN_LUT_ENTRY;
+
+PB2OCN_LUT_ENTRY pb2ocn_lut1[32] = {
+       /* 0 - 7 */
+       {0x00000000, 0x00000201}, /* PBA=0xE000_0000 -> PCI/X (Byte-Swap) */
+       {0x00000000, 0x00000201}, /* PBA=0xE100_0000 -> PCI/X (Byte-Swap) */
+       {0x00000000, 0x00000201}, /* PBA=0xE200_0000 -> PCI/X (Byte-Swap) */
+       {0x00000000, 0x00000201}, /* PBA=0xE300_0000 -> PCI/X (Byte-Swap) */
+       {0x00000000, 0x00000201}, /* PBA=0xE400_0000 -> PCI/X (Byte-Swap) */
+       {0x00000000, 0x00000201}, /* PBA=0xE500_0000 -> PCI/X (Byte-Swap) */
+       {0x00000000, 0x00000201}, /* PBA=0xE600_0000 -> PCI/X (Byte-Swap) */
+       {0x00000000, 0x00000201}, /* PBA=0xE700_0000 -> PCI/X (Byte-Swap) */
+
+       /* 8 - 15 */
+       {0x00000000, 0x00000201}, /* PBA=0xE800_0000 -> PCI/X (Byte-Swap) */
+       {0x00000000, 0x00000201}, /* PBA=0xE900_0000 -> PCI/X (Byte-Swap) */
+       {0x00000000, 0x00000201}, /* PBA=0xEA00_0000 -> PCI/X (Byte-Swap) */
+       {0x00000000, 0x00000201}, /* PBA=0xEB00_0000 -> PCI/X (Byte-Swap) */
+       {0x00000000, 0x00000201}, /* PBA=0xEC00_0000 -> PCI/X (Byte-Swap) */
+       {0x00000000, 0x00000201}, /* PBA=0xED00_0000 -> PCI/X (Byte-Swap) */
+       {0x00000000, 0x00000201}, /* PBA=0xEE00_0000 -> PCI/X (Byte-Swap) */
+       {0x00000000, 0x00000201}, /* PBA=0xEF00_0000 -> PCI/X (Byte-Swap) */
+
+       /* 16 - 23 */
+       {0x00000000, 0x00000201}, /* PBA=0xF000_0000 -> PCI/X (Byte-Swap) */
+       {0x00000000, 0x00000201}, /* PBA=0xF100_0000 -> PCI/X (Byte-Swap) */
+       {0x00000000, 0x00000201}, /* PBA=0xF200_0000 -> PCI/X (Byte-Swap) */
+       {0x00000000, 0x00000201}, /* PBA=0xF300_0000 -> PCI/X (Byte-Swap) */
+       {0x00000000, 0x00000201}, /* PBA=0xF400_0000 -> PCI/X (Byte-Swap) */
+       {0x00000000, 0x00000201}, /* PBA=0xF500_0000 -> PCI/X (Byte-Swap) */
+       {0x00000000, 0x00000201}, /* PBA=0xF600_0000 -> PCI/X (Byte-Swap) */
+       {0x00000000, 0x00000201}, /* PBA=0xF700_0000 -> PCI/X (Byte-Swap) */
+       /* 24 - 31 */
+       {0x00000000, 0x00000201}, /* PBA=0xF800_0000 -> PCI/X (Byte-Swap) */
+       {0x00000000, 0x00000201}, /* PBA=0xF900_0000 -> PCI/X (Byte-Swap) */
+       {0x00000000, 0x00000201}, /* PBA=0xFA00_0000 -> PCI/X  PCI I/O (Byte-Swap) */
+       {0x00000000, 0x00000201}, /* PBA=0xFB00_0000 -> PCI/X  PCI Config (Byte-Swap) */
+
+       {0x00000000, 0x02000240}, /* PBA=0xFC00_0000 -> HLP */
+       {0x00000000, 0x01000240}, /* PBA=0xFD00_0000 -> HLP */
+       {0x00000000, 0x03000240}, /* PBA=0xFE00_0000 -> HLP */
+       {0x00000000, 0x00000240}  /* PBA=0xFF00_0000 -> HLP : (Translation Enabled + Byte-Swap)*/
+};
+
+#ifdef CFG_CLK_SPREAD
+typedef struct {
+       ulong ctrl0;
+       ulong ctrl1;
+} PLL_CTRL_SET;
+
+/*
+ * Clock Generator SPLL0 initialization values
+ * PLL0 configuration table for various PB_CLKO freq.
+ * Uses pre-calculated values for Fs = 30 kHz, D = 0.5%
+ * Fout depends on required PB_CLKO. Based on Fref = 33 MHz
+ */
+
+static PLL_CTRL_SET pll0_config[8] = {
+       {0x00000000, 0x00000000},       /* 0: bypass */
+       {0x00000000, 0x00000000},       /* 1: reserved */
+       {0x00430044, 0x00000043},       /* 2: CG_PB_CLKO = 183 MHz */
+       {0x005c0044, 0x00000039},       /* 3: CG_PB_CLKO = 100 MHz */
+       {0x005c0044, 0x00000039},       /* 4: CG_PB_CLKO = 133 MHz */
+       {0x004a0044, 0x00000040},       /* 5: CG_PB_CLKO = 167 MHz */
+       {0x005c0044, 0x00000039},       /* 6: CG_PB_CLKO = 200 MHz */
+       {0x004f0044, 0x0000003e}        /* 7: CG_PB_CLKO = 233 MHz */
+};
+#endif /* CFG_CLK_SPREAD */
+
+/*
+ * Prosessor Bus Clock (in MHz) defined by CG_PB_SELECT
+ * (based on recommended Tsi108 reference clock 33MHz)
+ */
+static int pb_clk_sel[8] = { 0, 0, 183, 100, 133, 167, 200, 233 };
+
+/*
+ * get_board_bus_clk()
+ *
+ * returns the bus clock in Hz.
+ */
+unsigned long get_board_bus_clk(void)
+{
+       ulong i;
+
+       /* Detect PB clock freq. */
+       i = in32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS);
+       i = (i >> 16) & 0x07;   /* Get PB PLL multiplier */
+
+       return pb_clk_sel[i] * 1000000;
+}
+
+/*
+ * board_early_init_f()
+ *
+ * board-specific initialization executed from flash
+ */
+
+int board_early_init_f(void)
+{
+       DECLARE_GLOBAL_DATA_PTR;
+       ulong i;
+
+       gd->mem_clk = 0;
+       i = in32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS);
+       i = (i >> 20) & 0x07;
+       switch (i) {
+       case 0:
+               printf("Using external clock\n");
+               break;
+       case 1:
+               gd->mem_clk = gd->bus_clk;
+               break;
+       case 4:
+       case 5:
+       case 6:
+               gd->mem_clk = pb_clk_sel[i] * 1000000;
+               break;
+       default:
+               printf("Invalid DDR2 clock setting\n");
+               return -1;
+       }
+       printf("BUS!   %d MHz\n", get_board_bus_clk() / 1000000);
+       printf("MEM!   %d MHz\n", gd->mem_clk / 1000000);
+       return 0;
+}
+
+/*
+ * board_early_init_r() - Tsi108 initialization function executed right after
+ * relocation. Contains code that cannot be executed from flash.
+ */
+
+int board_early_init_r(void)
+{
+       ulong temp, i;
+       ulong reg_val;
+       volatile ulong *reg_ptr;
+       
+       reg_ptr =
+           (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x900);
+
+       for (i = 0; i < 32; i++) {
+               *reg_ptr++ = 0x00000201;        /* SWAP ENABLED */
+               *reg_ptr++ = 0x00;
+       }
+
+       __asm__ __volatile__("eieio");
+       __asm__ __volatile__("sync");
+
+       /* Setup PB_OCN_BAR2: size 256B + ENable @ 0x0_80000000 */
+
+       out32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2,
+             0x80000001);
+       __asm__ __volatile__("sync");
+
+       /* Make sure that OCN_BAR2 decoder is set (to allow following immediate
+        * read from SDRAM) 
+        */
+
+       temp = in32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2);
+       __asm__ __volatile__("sync");
+
+       /*
+        * Remap PB_OCN_BAR1 to accomodate PCI-bus aperture and EPROM into the
+        * processor bus address space. Immediately after reset LUT and address
+        * translation are disabled for this BAR. Now we have to initialize LUT
+        * and switch from the BOOT mode to the normal operation mode.
+        * 
+        * The aperture defined by PB_OCN_BAR1 startes at address 0xE0000000
+        * and covers 512MB of address space. To allow larger aperture we also 
+        * have to relocate register window of Tsi108
+        *
+        * Initialize LUT (32-entries) prior switching PB_OCN_BAR1 from BOOT 
+        * mode.
+        * 
+        * initialize pointer to LUT associated with PB_OCN_BAR1
+        */
+       reg_ptr =
+           (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x800);
+
+       for (i = 0; i < 32; i++) {
+               *reg_ptr++ = pb2ocn_lut1[i].lower;
+               *reg_ptr++ = pb2ocn_lut1[i].upper;
+       }
+
+       __asm__ __volatile__("sync");
+
+       /* Base addresses for Cs0, CS1, CS2, CS3 */
+
+       out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_ADDR,
+             0x00000000);
+       __asm__ __volatile__("sync");
+
+       out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_ADDR,
+             0x00100000);
+       __asm__ __volatile__("sync");
+
+       out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_ADDR,
+             0x00200000);
+       __asm__ __volatile__("sync");
+
+       out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_ADDR,
+             0x00300000);
+       __asm__ __volatile__("sync");
+
+       /* Masks for HLP banks */
+
+       out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_MASK,
+             0xFFF00000);
+       __asm__ __volatile__("sync");
+
+       out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_MASK,
+             0xFFF00000);
+       __asm__ __volatile__("sync");
+
+       out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_MASK,
+             0xFFF00000);
+       __asm__ __volatile__("sync");
+
+       out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_MASK,
+             0xFFF00000);
+       __asm__ __volatile__("sync");
+
+       /* Set CTRL0 values for banks */
+
+       out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL0,
+             0x7FFC44C2);
+       __asm__ __volatile__("sync");
+
+       out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL0,
+             0x7FFC44C0);
+       __asm__ __volatile__("sync");
+
+       out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL0,
+             0x7FFC44C0);
+       __asm__ __volatile__("sync");
+
+       out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL0,
+             0x7FFC44C2);
+       __asm__ __volatile__("sync");
+
+       /* Set banks to latched mode, enabled, and other default settings */
+
+       out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL1,
+             0x7C0F2000);
+       __asm__ __volatile__("sync");
+
+       out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL1,
+             0x7C0F2000);
+       __asm__ __volatile__("sync");
+
+       out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL1,
+             0x7C0F2000);
+       __asm__ __volatile__("sync");
+
+       out32(CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL1,
+             0x7C0F2000);
+       __asm__ __volatile__("sync");
+       
+       /*
+        * Set new value for PB_OCN_BAR1: switch from BOOT to LUT mode.
+        * value for PB_OCN_BAR1: (BA-0xE000_0000 + size 512MB + ENable)
+        */
+       out32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1,
+             0xE0000011);
+       __asm__ __volatile__("sync");
+
+       /* Make sure that OCN_BAR2 decoder is set (to allow following 
+        * immediate read from SDRAM) 
+        */
+         
+       temp = in32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1);
+       __asm__ __volatile__("sync");
+
+       /*
+        * SRI: At this point we have enabled the HLP banks. That means we can
+        * now read from the NVRAM and initialize the environment variables.
+        * We will over-ride the env_init called in board_init_f
+        * This is really a work-around because, the HLP bank 1
+        * where NVRAM resides is not visible during board_init_f 
+        * (lib_ppc/board.c)
+        * Alternatively, we could use the I2C EEPROM at start-up to configure
+        * and enable all HLP banks and not just HLP 0 as is being done for
+        * Taiga Rev. 2.
+        */
+       
+       env_init();
+
+#ifndef DISABLE_PBM
+       
+       /*
+        * For IBM processors we have to set Address-Only commands generated 
+        * by PBM that are different from ones set after reset.
+        */
+
+       temp = get_cpu_type();
+
+       if ((CPU_750FX == temp) || (CPU_750GX == temp)) {
+               out32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_MCMD,
+                     0x00009955);
+       }
+#endif /* DISABLE_PBM */
+
+#ifdef CONFIG_PCI
+       /*
+        * Initialize PCI/X block
+        */
+
+       /* Map PCI/X Configuration Space (16MB @ 0x0_FE000000) */
+       out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_BAR0_UPPER,
+             0);
+       __asm__ __volatile__("sync");
+
+       out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_BAR0,
+             0xFB000001);
+       __asm__ __volatile__("sync");
+
+       /* Set Bus Number for the attached PCI/X bus (we will use 0 for NB) */
+
+       temp =
+           in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT);
+
+       temp &= ~0xFF00;        /* Clear the BUS_NUM field */
+
+       out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT,
+             temp);
+
+       /* Map PCI/X IO Space (64KB @ 0x0_FD000000) takes one 16MB LUT entry */
+
+       out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO_UPPER,
+             0);
+       __asm__ __volatile__("sync");
+
+       /* This register is on the PCI side to interpret the address it receives
+        * and maps it as a IO address. 
+        */
+
+       out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO,
+             0xFA000001);
+       __asm__ __volatile__("sync");
+
+       /*
+        * Map PCI/X Memory Space
+        *
+        * Transactions directed from OCM to PCI Memory Space are directed 
+        * from PB to PCI
+        * unchanged (as defined by PB_OCN_BAR1,2 and LUT settings).
+        * If address remapping is required the corresponding PCI_PFAB_MEM32
+        * and PCI_PFAB_PFMx register groups have to be configured.
+        *
+        * Map the path from the PCI/X bus into the system memory
+        *
+        * The memory mapped window assotiated with PCI P2O_BAR2 provides 
+        * access to the system memory without address remapping.
+        * All system memory is opened for accesses initiated by PCI/X bus
+        * masters.
+        *
+        * Initialize LUT associated with PCI P2O_BAR2
+        *
+        * set pointer to LUT associated with PCI P2O_BAR2
+        */
+
+       reg_ptr =
+           (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x500);
+
+#ifdef DISABLE_PBM
+
+       /* In case when PBM is disabled (no HW supported cache snoopng on PB) 
+        * P2O_BAR2 is directly mapped into the system memory without address 
+        * translation. 
+        */
+
+       reg_val = 0x00000004;   /* SDRAM port + NO Addr_Translation */
+
+       for (i = 0; i < 32; i++) {
+               *reg_ptr++ = reg_val;   /* P2O_BAR2_LUTx */
+               *reg_ptr++ = 0;         /* P2O_BAR2_LUT_UPPERx */
+       }
+
+       /* value for PCI BAR2 (size = 512MB, Enabled, No Addr. Translation) */
+       reg_val = 0x00007500;
+#else
+
+       reg_val = 0x00000002;   /* Destination port = PBM */
+
+       for (i = 0; i < 32; i++) {
+               *reg_ptr++ = reg_val;   /* P2O_BAR2_LUTx */
+/* P2O_BAR2_LUT_UPPERx : Set data swapping mode for PBM (byte swapping) */
+               *reg_ptr++ = 0x40000000;
+/* offset = 16MB, address translation is enabled to allow byte swapping */
+               reg_val += 0x01000000;
+       }
+
+/* value for PCI BAR2 (size = 512MB, Enabled, Address Translation Enabled) */
+       reg_val = 0x00007100;
+#endif
+
+       __asm__ __volatile__("eieio");
+       __asm__ __volatile__("sync");
+
+       out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES,
+             reg_val);
+       __asm__ __volatile__("sync");
+
+       /* Set 64-bit PCI bus address for system memory 
+        * ( 0 is the best choice for easy mapping) 
+        */
+
+       out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2,
+             0x00000000);
+       out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2_UPPER,
+             0x00000000);
+       __asm__ __volatile__("sync");
+
+#ifndef DISABLE_PBM
+       /*
+        *  The memory mapped window assotiated with PCI P2O_BAR3 provides 
+        *  access to the system memory using SDRAM OCN port and address 
+        *  translation. This is alternative way to access SDRAM from PCI 
+        *  required for Tsi108 emulation testing.
+        *  All system memory is opened for accesses initiated by 
+        *  PCI/X bus masters.
+        *
+        *  Initialize LUT associated with PCI P2O_BAR3
+        *
+        *  set pointer to LUT associated with PCI P2O_BAR3
+        */
+       reg_ptr =
+           (ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x600);
+
+       reg_val = 0x00000004;   /* Destination port = SDC */
+
+       for (i = 0; i < 32; i++) {
+               *reg_ptr++ = reg_val;   /* P2O_BAR3_LUTx */
+               
+/* P2O_BAR3_LUT_UPPERx : Set data swapping mode for PBM (byte swapping) */
+               *reg_ptr++ = 0; 
+               
+/* offset = 16MB, address translation is enabled to allow byte swapping */
+               reg_val += 0x01000000;
+       }
+
+       __asm__ __volatile__("eieio");
+       __asm__ __volatile__("sync");
+
+       /* Configure PCI P2O_BAR3 (size = 512MB, Enabled) */
+
+       reg_val =
+           in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET +
+                PCI_P2O_PAGE_SIZES);
+       reg_val &= ~0x00FF;
+       reg_val |= 0x0071;
+       out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES,
+             reg_val);
+       __asm__ __volatile__("sync");
+
+       /* Set 64-bit base PCI bus address for window (0x20000000) */
+
+       out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3_UPPER,
+             0x00000000);
+       out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3,
+             0x20000000);
+       __asm__ __volatile__("sync");
+
+#endif /* !DISABLE_PBM */
+
+#ifdef ENABLE_PCI_CSR_BAR      
+       /* open if required access to Tsi108 CSRs from the PCI/X bus */
+       /* enable BAR0 on the PCI/X bus */
+       reg_val =
+           in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_MISC_CSR);
+       reg_val |= 0x02;
+       out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_MISC_CSR,
+             reg_val);
+       __asm__ __volatile__("sync");
+
+       out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0_UPPER,
+             0x00000000);
+       out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0,
+             CFG_TSI108_CSR_BASE);
+       __asm__ __volatile__("sync");
+
+#endif
+
+       /*
+        * Finally enable PCI/X Bus Master and Memory Space access
+        */
+       
+       reg_val = in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR);
+       reg_val |= 0x06;
+       out32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR, reg_val);
+       __asm__ __volatile__("sync");
+
+#endif /* CONFIG_PCI */
+
+       /*
+        * Initialize MPIC outputs (interrupt pins):
+        * Interrupt routing on the Grendel Emul. Board:
+        *    PB_INT[0] -> INT (CPU0)
+        *    PB_INT[1] -> INT (CPU1)
+        *    PB_INT[2] -> MCP (CPU0)
+        *    PB_INT[3] -> MCP (CPU1)
+        * Set interrupt controller outputs as Level_Sensitive/Active_Low
+        */
+       out32(CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(0), 0x02);
+       out32(CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(1), 0x02);
+       out32(CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(2), 0x02);
+       out32(CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(3), 0x02);
+       __asm__ __volatile__("sync");
+
+       /*
+        * Ensure that Machine Check exception is enabled
+        * We need it to support PCI Bus probing (configuration reads)
+        */
+       
+       reg_val = mfmsr();
+       mtmsr(reg_val | MSR_ME);
+
+       return 0;
+}
+
+/*
+ * Needed to print out L2 cache info
+ * used in the misc_init_r function
+ */
+
+unsigned long get_l2cr(void)
+{
+       unsigned long l2controlreg;
+       asm volatile ("mfspr %0, 1017":"=r" (l2controlreg):);
+       return l2controlreg;
+}
+
+/*
+ * misc_init_r()
+ *
+ * various things to do after relocation
+ *
+ */
+
+int misc_init_r(void)
+{
+       DECLARE_GLOBAL_DATA_PTR;
+#ifdef CFG_CLK_SPREAD  /* Initialize Spread-Spectrum Clock generation */
+       ulong i;
+
+       /* Ensure that Spread-Spectrum is disabled */
+       out32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, 0);
+       out32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0);
+
+       /* Initialize PLL1: CG_PCI_CLK , internal OCN_CLK
+        * Uses pre-calculated value for Fout = 800 MHz, Fs = 30 kHz, D = 0.5%
+        */
+
+       out32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0x002e0044); /* D = 0.25% */
+       out32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL1, 0x00000039); /* BWADJ */
+
+       /* Initialize PLL0: CG_PB_CLKO  */
+       /* Detect PB clock freq. */
+       i = in32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS);
+       i = (i >> 16) & 0x07;   /* Get PB PLL multiplier */
+
+       out32(CFG_TSI108_CSR_BASE +
+             TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, pll0_config[i].ctrl0);
+       out32(CFG_TSI108_CSR_BASE +
+             TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL1, pll0_config[i].ctrl1);
+
+       /* Wait and set SSEN for both PLL0 and 1 */
+       udelay(1000);
+       out32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0x802e0044); /* D=0.25% */
+       out32(CFG_TSI108_CSR_BASE +
+             TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0,
+             0x80000000 | pll0_config[i].ctrl0);
+#endif /* CFG_CLK_SPREAD */
+
+#ifdef CFG_L2
+       l2cache_enable();
+#endif
+       printf("BUS:   %d MHz\n", gd->bus_clk / 1000000);
+       printf("MEM:   %d MHz\n", gd->mem_clk / 1000000);
+
+       /*
+        * All the information needed to print the cache details is avaiblable 
+        * at this point i.e. above call to l2cache_enable is the very last 
+        * thing done with regards to enabling diabling the cache. 
+        * So this seems like a good place to print all this information
+        */
+       
+       printf("CACHE: ");
+       switch (get_cpu_type()) {
+       case CPU_7447A:
+               printf("L1 Instruction cache - 32KB 8-way");
+               (get_hid0() & (1 << 15)) ? printf(" ENABLED\n") :
+                   printf(" DISABLED\n");
+               printf("       L1 Data cache - 32KB 8-way");
+               (get_hid0() & (1 << 14)) ? printf(" ENABLED\n") :
+                   printf(" DISABLED\n");
+               printf("       Unified L2 cache - 512KB 8-way");
+               (get_l2cr() & (1 << 31)) ? printf(" ENABLED\n") :
+                   printf(" DISABLED\n");
+               printf("\n");
+               break;
+
+       case CPU_7448:
+               printf("L1 Instruction cache - 32KB 8-way");
+               (get_hid0() & (1 << 15)) ? printf(" ENABLED\n") :
+                   printf(" DISABLED\n");
+               printf("       L1 Data cache - 32KB 8-way");
+               (get_hid0() & (1 << 14)) ? printf(" ENABLED\n") :
+                   printf(" DISABLED\n");
+               printf("       Unified L2 cache - 1MB 8-way");
+               (get_l2cr() & (1 << 31)) ? printf(" ENABLED\n") :
+                   printf(" DISABLED\n");
+               break;
+       default:
+               break;
+       }
+       return 0;
+}