]> git.sur5r.net Git - u-boot/commitdiff
fsl: Clean up printing of PCI boot info
authorPeter Tyser <ptyser@xes-inc.com>
Fri, 29 Oct 2010 22:59:24 +0000 (17:59 -0500)
committerWolfgang Denk <wd@denx.de>
Sun, 14 Nov 2010 22:46:42 +0000 (23:46 +0100)
Previously boards used a variety of indentations, newline styles, and
colon styles for the PCI information that is printed on bootup.  This
patch unifies the style to look like:

...
NAND:  1024 MiB
PCIE1: connected as Root Complex
           Scanning PCI bus 01
        04  01  8086  1010  0200  00
        04  01  8086  1010  0200  00
        03  00  10b5  8112  0604  00
        02  01  10b5  8518  0604  00
        02  02  10b5  8518  0604  00
        08  00  1957  0040  0b20  00
        07  00  10b5  8518  0604  00
        09  00  10b5  8112  0604  00
        07  01  10b5  8518  0604  00
        07  02  10b5  8518  0604  00
        06  00  10b5  8518  0604  00
        02  03  10b5  8518  0604  00
        01  00  10b5  8518  0604  00
PCIE1: Bus 00 - 0b
PCIE2: connected as Root Complex
           Scanning PCI bus 0d
        0d  00  1957  0040  0b20  00
PCIE2: Bus 0c - 0d
In:    serial
...

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
CC: wd@denx.de
CC: sr@denx.de
CC: galak@kernel.crashing.org
24 files changed:
board/atum8548/atum8548.c
board/freescale/corenet_ds/pci.c
board/freescale/mpc8536ds/mpc8536ds.c
board/freescale/mpc8540ads/mpc8540ads.c
board/freescale/mpc8541cds/mpc8541cds.c
board/freescale/mpc8544ds/mpc8544ds.c
board/freescale/mpc8548cds/mpc8548cds.c
board/freescale/mpc8555cds/mpc8555cds.c
board/freescale/mpc8560ads/mpc8560ads.c
board/freescale/mpc8568mds/mpc8568mds.c
board/freescale/mpc8569mds/mpc8569mds.c
board/freescale/mpc8572ds/mpc8572ds.c
board/freescale/mpc8610hpcd/mpc8610hpcd.c
board/freescale/mpc8641hpcn/mpc8641hpcn.c
board/freescale/p1022ds/p1022ds.c
board/freescale/p1_p2_rdb/pci.c
board/freescale/p2020ds/p2020ds.c
board/pm854/pm854.c
board/pm856/pm856.c
board/sbc8548/sbc8548.c
board/sbc8641d/sbc8641d.c
board/tqc/tqm85xx/tqm85xx.c
board/xes/common/fsl_8xxx_pci.c
drivers/pci/fsl_pci_init.c

index 671f9e985364ef2084bd465d1998fef569755987..4fcbb18561b171e177f8000e1ff79705b1cc5197 100644 (file)
@@ -218,14 +218,14 @@ void pci_init_board(void)
 
                pcie1_hose.region_count = 1;
 #endif
-               printf ("    PCIE1 connected to Slot as %s (base addr %lx)\n",
+               printf ("PCIE1: connected to Slot as %s (base addr %lx)\n",
                                pcie_ep ? "Endpoint" : "Root Complex",
                                pci_info[num].regs);
 
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie1_hose, first_free_busno);
        } else {
-               printf ("    PCIE1: disabled\n");
+               printf("PCIE1: disabled\n");
        }
 
        puts("\n");
@@ -242,7 +242,7 @@ void pci_init_board(void)
        if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
                SET_STD_PCI_INFO(pci_info[num], 1);
                pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
-               printf ("\n    PCI1: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
+               printf("PCI1: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
                        (pci_32) ? 32 : 64,
                        (pci_speed == 33333000) ? "33" :
                        (pci_speed == 66666000) ? "66" : "unknown",
@@ -254,7 +254,7 @@ void pci_init_board(void)
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pci1_hose, first_free_busno);
        } else {
-               printf ("    PCI: disabled\n");
+               printf("PCI1: disabled\n");
        }
 
        puts("\n");
@@ -267,11 +267,11 @@ void pci_init_board(void)
                SET_STD_PCI_INFO(pci_info[num], 2);
                pci_agent = fsl_setup_hose(&pci2_hose, pci_info[num].regs);
 
-               puts ("    PCI2\n");
+               puts("PCI2\n");
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pci1_hose, first_free_busno);
        } else {
-               printf ("    PCI2: disabled\n");
+               printf("PCI2: disabled\n");
        }
        puts("\n");
 #else
index e1bca1984c2cbc536f1529bebaa802ebfc7242b5..775b623ccbb0d1f943f0d66951e3e798f12e2614 100644 (file)
@@ -68,13 +68,13 @@ void pci_init_board(void)
                                LAW_TRGT_IF_PCIE_1);
                SET_STD_PCIE_INFO(pci_info[num], 1);
                pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-               printf("    PCIE1 connected to Slot 1 as %s (base addr %lx)\n",
+               printf("PCIE1: connected to Slot 1 as %s (base addr %lx)\n",
                                pcie_ep ? "End Point" : "Root Complex",
                                pci_info[num].regs);
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                &pcie1_hose, first_free_busno);
        } else {
-               printf ("    PCIE1: disabled\n");
+               printf("PCIE1: disabled\n");
        }
 #else
        setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_PCIE1); /* disable */
@@ -90,13 +90,13 @@ void pci_init_board(void)
                                LAW_TRGT_IF_PCIE_2);
                SET_STD_PCIE_INFO(pci_info[num], 2);
                pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
-               printf("    PCIE2 connected to Slot 3 as %s (base addr %lx)\n",
+               printf("PCIE2: connected to Slot 3 as %s (base addr %lx)\n",
                                pcie_ep ? "End Point" : "Root Complex",
                                pci_info[num].regs);
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                &pcie2_hose, first_free_busno);
        } else {
-               printf ("    PCIE2: disabled\n");
+               printf("PCIE2: disabled\n");
        }
 #else
        setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_PCIE2); /* disable */
@@ -112,13 +112,13 @@ void pci_init_board(void)
                                LAW_TRGT_IF_PCIE_3);
                SET_STD_PCIE_INFO(pci_info[num], 3);
                pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
-               printf("    PCIE3 connected to Slot 2 as %s (base addr %lx)\n",
+               printf("PCIE3: connected to Slot 2 as %s (base addr %lx)\n",
                                pcie_ep ? "End Point" : "Root Complex",
                                pci_info[num].regs);
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                &pcie3_hose, first_free_busno);
        } else {
-               printf ("    PCIE3: disabled\n");
+               printf("PCIE3: disabled\n");
        }
 #else
        setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_PCIE3); /* disable */
@@ -134,13 +134,13 @@ void pci_init_board(void)
                                LAW_TRGT_IF_PCIE_4);
                SET_STD_PCIE_INFO(pci_info[num], 4);
                pcie_ep = fsl_setup_hose(&pcie4_hose, pci_info[num].regs);
-               printf("    PCIE4 connected to as %s (base addr %lx)\n",
+               printf("PCIE4: connected to as %s (base addr %lx)\n",
                                pcie_ep ? "End Point" : "Root Complex",
                                pci_info[num].regs);
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                &pcie4_hose, first_free_busno);
        } else {
-               printf ("    PCIE4: disabled\n");
+               printf("PCIE4: disabled\n");
        }
 #else
        setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_PCIE4); /* disable */
index c8e08563b6a749e25c99bc79e337325f7dc27ac6..8ad75495172333fb97295ae19637f172189b2acc 100644 (file)
@@ -229,13 +229,13 @@ void pci_init_board(void)
                                LAW_TRGT_IF_PCIE_3);
                SET_STD_PCIE_INFO(pci_info[num], 3);
                pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
-               printf ("    PCIE3 connected to Slot3 as %s (base address %lx)\n",
+               printf("PCIE3: connected to Slot3 as %s (base address %lx)\n",
                        pcie_ep ? "Endpoint" : "Root Complex",
                        pci_info[num].regs);
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie3_hose, first_free_busno);
        } else {
-               printf ("    PCIE3: disabled\n");
+               printf("PCIE3: disabled\n");
        }
 
        puts("\n");
@@ -253,13 +253,13 @@ void pci_init_board(void)
                                LAW_TRGT_IF_PCIE_1);
                SET_STD_PCIE_INFO(pci_info[num], 1);
                pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-               printf ("    PCIE1 connected to Slot1 as %s (base address %lx)\n",
+               printf("PCIE1: connected to Slot1 as %s (base address %lx)\n",
                        pcie_ep ? "Endpoint" : "Root Complex",
                        pci_info[num].regs);
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie1_hose, first_free_busno);
        } else {
-               printf ("    PCIE1: disabled\n");
+               printf("PCIE1: disabled\n");
        }
 
        puts("\n");
@@ -277,13 +277,13 @@ void pci_init_board(void)
                                LAW_TRGT_IF_PCIE_2);
                SET_STD_PCIE_INFO(pci_info[num], 2);
                pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
-               printf ("    PCIE2 connected to Slot 2 as %s (base address %lx)\n",
+               printf("PCIE2: connected to Slot 2 as %s (base address %lx)\n",
                        pcie_ep ? "Endpoint" : "Root Complex",
                        pci_info[num].regs);
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie2_hose, first_free_busno);
        } else {
-               printf ("    PCIE2: disabled\n");
+               printf("PCIE2: disabled\n");
        }
 
        puts("\n");
@@ -304,7 +304,7 @@ void pci_init_board(void)
                                LAW_TRGT_IF_PCI);
                SET_STD_PCI_INFO(pci_info[num], 1);
                pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
-               printf ("\n    PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
+               printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
                        (pci_32) ? 32 : 64,
                        (pci_speed == 33333000) ? "33" :
                        (pci_speed == 66666000) ? "66" : "unknown",
@@ -316,7 +316,7 @@ void pci_init_board(void)
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pci1_hose, first_free_busno);
        } else {
-               printf ("    PCI: disabled\n");
+               printf("PCI: disabled\n");
        }
 
        puts("\n");
index f9ff827f47405bfb8e2db49fd814b758badc8974..d354a26f69a45f3fae22215df3ec12e3a5e535f9 100644 (file)
@@ -47,10 +47,10 @@ int checkboard (void)
        puts("Board: ADS\n");
 
 #ifdef CONFIG_PCI
-       printf("    PCI1: 32 bit, %d MHz (compiled)\n",
+       printf("PCI1: 32 bit, %d MHz (compiled)\n",
               CONFIG_SYS_CLK_FREQ / 1000000);
 #else
-       printf("    PCI1: disabled\n");
+       printf("PCI1: disabled\n");
 #endif
 
        /*
index 0580fe723959e50157214b84e4f15d55619f592c..59ec60446e91acda15112254ce866f6a83e37793 100644 (file)
@@ -221,17 +221,17 @@ int checkboard (void)
                MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
                MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
 
-       printf ("    PCI1: %d bit, %s MHz, %s\n",
+       printf("PCI1: %d bit, %s MHz, %s\n",
                (pci1_32) ? 32 : 64,
                (pci1_speed == 33000000) ? "33" :
                (pci1_speed == 66000000) ? "66" : "unknown",
                pci1_clk_sel ? "sync" : "async");
 
        if (pci_dual) {
-               printf ("    PCI2: 32 bit, 66 MHz, %s\n",
+               printf("PCI2: 32 bit, 66 MHz, %s\n",
                        pci2_clk_sel ? "sync" : "async");
        } else {
-               printf ("    PCI2: disabled\n");
+               printf("PCI2: disabled\n");
        }
 
        /*
index da3a2b6eecda939b015cbe530650f829d405648f..3bbf0c273ab2b2156f4e7b6b5865bf89587c94c4 100644 (file)
@@ -142,9 +142,9 @@ void pci_init_board(void)
 
                pcie3_hose.region_count = 1;
 #endif
-               printf ("    PCIE3 connected to ULI as %s (base addr %lx)\n",
-                               pcie_ep ? "Endpoint" : "Root Complex",
-                               pci_info[num].regs);
+               printf("PCIE3: connected to ULI as %s (base addr %lx)\n",
+                       pcie_ep ? "Endpoint" : "Root Complex",
+                       pci_info[num].regs);
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie3_hose, first_free_busno);
 
@@ -154,7 +154,7 @@ void pci_init_board(void)
                 */
                in_be32((u32 *)CONFIG_SYS_PCIE3_MEM_BUS);
        } else {
-               printf ("    PCIE3: disabled\n");
+               printf("PCIE3: disabled\n");
        }
        puts("\n");
 #else
@@ -177,14 +177,14 @@ void pci_init_board(void)
 
                pcie1_hose.region_count = 1;
 #endif
-               printf ("    PCIE1 connected to Slot 2 as %s (base addr %lx)\n",
+               printf("PCIE1: connected to Slot 2 as %s (base addr %lx)\n",
                                pcie_ep ? "Endpoint" : "Root Complex",
                                pci_info[num].regs);
 
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie1_hose, first_free_busno);
        } else {
-               printf ("    PCIE1: disabled\n");
+               printf("PCIE1: disabled\n");
        }
 
        puts("\n");
@@ -208,13 +208,13 @@ void pci_init_board(void)
 
                pcie2_hose.region_count = 1;
 #endif
-               printf ("    PCIE2 connected to Slot 1 as %s (base addr %lx)\n",
-                               pcie_ep ? "Endpoint" : "Root Complex",
-                               pci_info[num].regs);
+               printf("PCIE2: connected to Slot 1 as %s (base addr %lx)\n",
+                       pcie_ep ? "Endpoint" : "Root Complex",
+                       pci_info[num].regs);
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie2_hose, first_free_busno);
        } else {
-               printf ("    PCIE2: disabled\n");
+               printf("PCIE2: disabled\n");
        }
 
        puts("\n");
@@ -231,7 +231,7 @@ void pci_init_board(void)
        if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
                SET_STD_PCI_INFO(pci_info[num], 1);
                pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
-               printf ("\n    PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
+               printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
                        (pci_32) ? 32 : 64,
                        (pci_speed == 33333000) ? "33" :
                        (pci_speed == 66666000) ? "66" : "unknown",
@@ -243,7 +243,7 @@ void pci_init_board(void)
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pci1_hose, first_free_busno);
        } else {
-               printf ("    PCI: disabled\n");
+               printf("PCI: disabled\n");
        }
 
        puts("\n");
index 23e552bde7732e58d70f0bc1cc5a61d8a0630840..14c902cb9604071e4e87ad30d179afed96b89d00 100644 (file)
@@ -284,7 +284,7 @@ void pci_init_board(void)
        if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
                SET_STD_PCI_INFO(pci_info[num], 1);
                pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
-               printf ("\n    PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
+               printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
                        (pci_32) ? 32 : 64,
                        (pci_speed == 33333000) ? "33" :
                        (pci_speed == 66666000) ? "66" : "unknown",
@@ -308,7 +308,7 @@ void pci_init_board(void)
                }
 #endif
        } else {
-               printf ("    PCI: disabled\n");
+               printf("PCI: disabled\n");
        }
 
        puts("\n");
@@ -321,10 +321,10 @@ void pci_init_board(void)
        uint pci2_clk_sel = porpllsr & 0x4000;  /* PORPLLSR[17] */
        uint pci_dual = get_pci_dual ();        /* PCI DUAL in CM_PCI[3] */
        if (pci_dual) {
-               printf ("    PCI2: 32 bit, 66 MHz, %s\n",
+               printf("PCI2: 32 bit, 66 MHz, %s\n",
                        pci2_clk_sel ? "sync" : "async");
        } else {
-               printf ("    PCI2: disabled\n");
+               printf("PCI2: disabled\n");
        }
 }
 #else
@@ -337,14 +337,14 @@ void pci_init_board(void)
        if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
                SET_STD_PCIE_INFO(pci_info[num], 1);
                pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-               printf ("    PCIE1 connected to Slot as %s (base addr %lx)\n",
-                               pcie_ep ? "Endpoint" : "Root Complex",
-                               pci_info[num].regs);
+               printf("PCIE1: connected to Slot as %s (base addr %lx)\n",
+                       pcie_ep ? "Endpoint" : "Root Complex",
+                       pci_info[num].regs);
 
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie1_hose, first_free_busno);
        } else {
-               printf ("    PCIE1: disabled\n");
+               printf("PCIE1: disabled\n");
        }
 
        puts("\n");
index b7e0e0cd82bad2b5ac08137b116b1353c726b14f..edaba26f5335fdb26d504d1be79fec5844d155eb 100644 (file)
@@ -219,17 +219,17 @@ int checkboard (void)
                MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
                MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
 
-       printf ("    PCI1: %d bit, %s MHz, %s\n",
+       printf("PCI1: %d bit, %s MHz, %s\n",
                (pci1_32) ? 32 : 64,
                (pci1_speed == 33000000) ? "33" :
                (pci1_speed == 66000000) ? "66" : "unknown",
                pci1_clk_sel ? "sync" : "async");
 
        if (pci_dual) {
-               printf ("    PCI2: 32 bit, 66 MHz, %s\n",
+               printf("PCI2: 32 bit, 66 MHz, %s\n",
                        pci2_clk_sel ? "sync" : "async");
        } else {
-               printf ("    PCI2: disabled\n");
+               printf("PCI2: disabled\n");
        }
 
        /*
index 423e9d72a761b56b8b024c1190fc832a411a354f..1761431e33898e8c548944c404e61f0429359b53 100644 (file)
@@ -252,10 +252,10 @@ int checkboard (void)
        puts("Board: ADS\n");
 
 #ifdef CONFIG_PCI
-       printf("    PCI1: 32 bit, %d MHz (compiled)\n",
+       printf("PCI1: 32 bit, %d MHz (compiled)\n",
               CONFIG_SYS_CLK_FREQ / 1000000);
 #else
-       printf("    PCI1: disabled\n");
+       printf("PCI1: disabled\n");
 #endif
 
        /*
index bd859e4ee4bcbf2ae32ff9290e445ca59a1ac6bf..d74fcac98355f7445a9faaaec5337ddc1b4f3c1f 100644 (file)
@@ -378,7 +378,7 @@ void pci_init_board(void)
        if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
                SET_STD_PCI_INFO(pci_info[num], 1);
                pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
-               printf ("\n    PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
+               printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
                        (pci_32) ? 32 : 64,
                        (pci_speed == 33333000) ? "33" :
                        (pci_speed == 66666000) ? "66" : "unknown",
@@ -390,7 +390,7 @@ void pci_init_board(void)
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pci1_hose, first_free_busno);
        } else {
-               printf ("    PCI: disabled\n");
+               printf("PCI: disabled\n");
        }
 
        puts("\n");
@@ -404,14 +404,14 @@ void pci_init_board(void)
        if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
                SET_STD_PCIE_INFO(pci_info[num], 1);
                pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-               printf ("    PCIE1 connected to Slot as %s (base addr %lx)\n",
+               printf("PCIE1: connected to Slot as %s (base addr %lx)\n",
                                pcie_ep ? "Endpoint" : "Root Complex",
                                pci_info[num].regs);
 
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie1_hose, first_free_busno);
        } else {
-               printf ("    PCIE1: disabled\n");
+               printf("PCIE1: disabled\n");
        }
 
        puts("\n");
index 743e712b849a8a4b2f39a3d2eef1a7a532203d00..dc0884e7bf19a4c2ab91ac8a2da046e9d6fde7e6 100644 (file)
@@ -584,13 +584,13 @@ void pci_init_board(void)
        if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
                SET_STD_PCIE_INFO(pci_info[num], 1);
                pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-               printf ("    PCIE1 connected to Slot as %s (base addr %lx)\n",
-                               pcie_ep ? "Endpoint" : "Root Complex",
-                               pci_info[num].regs);
+               printf("PCIE1: connected to Slot as %s (base addr %lx)\n",
+                       pcie_ep ? "Endpoint" : "Root Complex",
+                       pci_info[num].regs);
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie1_hose, first_free_busno);
        } else {
-               printf ("    PCIE1: disabled\n");
+               printf("PCIE1: disabled\n");
        }
 
        puts("\n");
index 6b96dfc16581ba48870a6c0e7c84055ac22f65ac..21252742154748bb2974d0179caf4757c06b5f7d 100644 (file)
@@ -192,9 +192,9 @@ void pci_init_board(void)
        if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){
                SET_STD_PCIE_INFO(pci_info[num], 3);
                pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
-               printf ("    PCIE3 connected to ULI as %s (base addr %lx)\n",
-                               pcie_ep ? "Endpoint" : "Root Complex",
-                               pci_info[num].regs);
+               printf("PCIE3: connected to ULI as %s (base addr %lx)\n",
+                       pcie_ep ? "Endpoint" : "Root Complex",
+                       pci_info[num].regs);
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie3_hose, first_free_busno);
                /*
@@ -211,7 +211,7 @@ void pci_init_board(void)
                        in_be32(p);
                }
        } else {
-               printf ("    PCIE3: disabled\n");
+               printf("PCIE3: disabled\n");
        }
        puts("\n");
 #else
@@ -224,13 +224,13 @@ void pci_init_board(void)
        if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){
                SET_STD_PCIE_INFO(pci_info[num], 2);
                pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
-               printf ("    PCIE2 connected to Slot 1 as %s (base addr %lx)\n",
-                               pcie_ep ? "Endpoint" : "Root Complex",
-                               pci_info[num].regs);
+               printf("PCIE2: connected to Slot 1 as %s (base addr %lx)\n",
+                       pcie_ep ? "Endpoint" : "Root Complex",
+                       pci_info[num].regs);
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie2_hose, first_free_busno);
        } else {
-               printf ("    PCIE2: disabled\n");
+               printf("PCIE2: disabled\n");
        }
 
        puts("\n");
@@ -244,13 +244,13 @@ void pci_init_board(void)
        if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
                SET_STD_PCIE_INFO(pci_info[num], 1);
                pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-               printf ("    PCIE1 connected to Slot 2 as %s (base addr %lx)\n",
+               printf("PCIE1: connected to Slot 2 as %s (base addr %lx)\n",
                                pcie_ep ? "Endpoint" : "Root Complex",
                                pci_info[num].regs);
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie1_hose, first_free_busno);
        } else {
-               printf ("    PCIE1: disabled\n");
+               printf("PCIE1: disabled\n");
        }
 
        puts("\n");
index f67f3e3c56c8dc174917f2975c97bea67e9f3c21..61a635de78d25cfb1759686f9bd5c467a4e22528 100644 (file)
@@ -244,14 +244,14 @@ void pci_init_board(void)
        if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE1)){
                SET_STD_PCIE_INFO(pci_info[num], 1);
                pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-               printf ("    PCIE1 connected to ULI as %s (base addr %lx)\n",
-                               pcie_ep ? "Endpoint" : "Root Complex",
-                               pci_info[num].regs);
+               printf("PCIE1: connected to ULI as %s (base addr %lx)\n",
+                       pcie_ep ? "Endpoint" : "Root Complex",
+                       pci_info[num].regs);
 
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie1_hose, first_free_busno);
        } else {
-               printf ("    PCIE1: disabled\n");
+               printf("PCIE1: disabled\n");
        }
 
        puts("\n");
@@ -265,13 +265,13 @@ void pci_init_board(void)
        if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE2)){
                SET_STD_PCIE_INFO(pci_info[num], 2);
                pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
-               printf ("    PCIE2 connected to Slot as %s (base addr %lx)\n",
-                               pcie_ep ? "Endpoint" : "Root Complex",
-                               pci_info[num].regs);
+               printf("PCIE2: connected to Slot as %s (base addr %lx)\n",
+                       pcie_ep ? "Endpoint" : "Root Complex",
+                       pci_info[num].regs);
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie2_hose, first_free_busno);
        } else {
-               printf ("    PCIE2: disabled\n");
+               printf("PCIE2: disabled\n");
        }
 
        puts("\n");
@@ -283,14 +283,14 @@ void pci_init_board(void)
        if (!(devdisr & MPC86xx_DEVDISR_PCI1)) {
                SET_STD_PCI_INFO(pci_info[num], 1);
                pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
-               printf(" PCI connected to PCI slots as %s" \
+               printf("PCI: connected to PCI slots as %s" \
                        " (base address %lx)\n",
                        pci_agent ? "Agent" : "Host",
                        pci_info[num].regs);
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pci1_hose, first_free_busno);
        } else {
-               printf ("    PCI: disabled\n");
+               printf("PCI: disabled\n");
        }
 
        puts("\n");
index 092ead6653572023fef815a35b0c0946c1aed6c8..812111db10070b47098e7364fb446848d568b9ef 100644 (file)
@@ -157,9 +157,9 @@ void pci_init_board(void)
        if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
                SET_STD_PCIE_INFO(pci_info[num], 1);
                pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-               printf("    PCIE1 connected to ULI as %s (base addr %lx)\n",
-                               pcie_ep ? "Endpoint" : "Root Complex",
-                               pci_info[num].regs);
+               printf("PCIE1: connected to ULI as %s (base addr %lx)\n",
+                       pcie_ep ? "Endpoint" : "Root Complex",
+                       pci_info[num].regs);
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie1_hose, first_free_busno);
 
@@ -171,22 +171,22 @@ void pci_init_board(void)
                                       + CONFIG_SYS_PCIE1_MEM_SIZE - 0x1000000)));
 
        } else {
-               puts("    PCIE1: disabled\n");
+               puts("PCIE1: disabled\n");
        }
 #else
-       puts("    PCIE1: disabled\n");
+       puts("PCIE1: disabled\n");
 #endif /* CONFIG_PCIE1 */
 
 #ifdef CONFIG_PCIE2
        SET_STD_PCIE_INFO(pci_info[num], 2);
        pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
-       printf("    PCIE2 connected as %s (base addr %lx)\n",
-                       pcie_ep ? "Endpoint" : "Root Complex",
-                       pci_info[num].regs);
+       printf("PCIE2: connected as %s (base addr %lx)\n",
+               pcie_ep ? "Endpoint" : "Root Complex",
+               pci_info[num].regs);
        first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                &pcie2_hose, first_free_busno);
 #else
-       puts("    PCIE2: disabled\n");
+       puts("PCIE2: disabled\n");
 #endif /* CONFIG_PCIE2 */
 
 }
index ee93e8b8156f930352253a59b88b75164c9dace2..7cb549b1bfb6a5932bb473b955f5b0749ae311c1 100644 (file)
@@ -225,7 +225,7 @@ static void configure_pcie(struct fsl_pci_info *info,
        set_next_law(info->mem_phys, law_size_bits(info->mem_size), info->law);
        set_next_law(info->io_phys, law_size_bits(info->io_size), info->law);
        is_endpoint = fsl_setup_hose(hose, info->regs);
-       printf("    PCIE%u connected to %s as %s (base addr %lx)\n",
+       printf("PCIE%u: connected to %s as %s (base addr %lx)\n",
               info->pci_num, connected,
               is_endpoint ? "Endpoint" : "Root Complex", info->regs);
        bus_number = fsl_pci_init_port(info, hose, bus_number);
@@ -255,7 +255,7 @@ void pci_init_board(void)
                SET_STD_PCIE_INFO(pci_info, 1);
                configure_pcie(&pci_info, &pcie1_hose, serdes_slot_name(PCIE1));
        } else {
-               printf("    PCIE1: disabled\n");
+               printf("PCIE1: disabled\n");
        }
 #else
        setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
@@ -266,7 +266,7 @@ void pci_init_board(void)
                SET_STD_PCIE_INFO(pci_info, 2);
                configure_pcie(&pci_info, &pcie2_hose, serdes_slot_name(PCIE2));
        } else {
-               printf("    PCIE2: disabled\n");
+               printf("PCIE2: disabled\n");
        }
 #else
        setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */
@@ -277,7 +277,7 @@ void pci_init_board(void)
                SET_STD_PCIE_INFO(pci_info, 3);
                configure_pcie(&pci_info, &pcie3_hose, serdes_slot_name(PCIE3));
        } else {
-               printf("    PCIE3: disabled\n");
+               printf("PCIE3: disabled\n");
        }
 #else
        setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */
index 97d4f834b08ed700de6c6418a6066fbce43b2b33..e2ed29c3c40c95d511282b8eec1800cca603c6ed 100644 (file)
@@ -65,13 +65,13 @@ void pci_init_board(void)
        if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
                SET_STD_PCIE_INFO(pci_info[num], 2);
                pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
-               printf("    PCIE2 connected to Slot 1 as %s (base addr %lx)\n",
-                               pcie_ep ? "Endpoint" : "Root Complex",
-                               pci_info[num].regs);
+               printf("PCIE2: connected to Slot 1 as %s (base addr %lx)\n",
+                       pcie_ep ? "Endpoint" : "Root Complex",
+                       pci_info[num].regs);
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie2_hose, first_free_busno);
        } else {
-               printf ("    PCIE2: disabled\n");
+               printf("PCIE2: disabled\n");
        }
        puts("\n");
 #else
@@ -84,13 +84,13 @@ void pci_init_board(void)
        if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
                SET_STD_PCIE_INFO(pci_info[num], 1);
                pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-               printf("    PCIE1 connected to Slot 2 as %s (base addr %lx)\n",
-                               pcie_ep ? "Endpoint" : "Root Complex",
-                               pci_info[num].regs);
+               printf("PCIE1: connected to Slot 2 as %s (base addr %lx)\n",
+                       pcie_ep ? "Endpoint" : "Root Complex",
+                       pci_info[num].regs);
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie1_hose, first_free_busno);
        } else {
-               printf ("    PCIE1: disabled\n");
+               printf("PCIE1: disabled\n");
        }
        puts("\n");
 #else
index 608ff916da819f78236bed570c8572ba30bfd525..f9882722c91767879a2be22e424cdbeff53fea97 100644 (file)
@@ -218,9 +218,9 @@ void pci_init_board(void)
        if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)) {
                SET_STD_PCIE_INFO(pci_info[num], 2);
                pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
-               printf("    PCIE2 connected to ULI as %s (base addr %lx)\n",
-                               pcie_ep ? "Endpoint" : "Root Complex",
-                               pci_info[num].regs);
+               printf("PCIE2: connected to ULI as %s (base addr %lx)\n",
+                       pcie_ep ? "Endpoint" : "Root Complex",
+                       pci_info[num].regs);
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie2_hose, first_free_busno);
 
@@ -245,7 +245,7 @@ void pci_init_board(void)
                }
 #endif
        } else {
-               printf("    PCIE2: disabled\n");
+               printf("PCIE2: disabled\n");
        }
        puts("\n");
 #else
@@ -258,13 +258,13 @@ void pci_init_board(void)
        if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)) {
                SET_STD_PCIE_INFO(pci_info[num], 3);
                pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
-               printf("    PCIE3 connected to Slot 1 as %s (base addr %lx)\n",
-                               pcie_ep ? "Endpoint" : "Root Complex",
-                               pci_info[num].regs);
+               printf("PCIE3: connected to Slot 1 as %s (base addr %lx)\n",
+                       pcie_ep ? "Endpoint" : "Root Complex",
+                       pci_info[num].regs);
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie3_hose, first_free_busno);
        } else {
-               printf("    PCIE3: disabled\n");
+               printf("PCIE3: disabled\n");
        }
        puts("\n");
 #else
@@ -277,13 +277,13 @@ void pci_init_board(void)
        if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)) {
                SET_STD_PCIE_INFO(pci_info[num], 1);
                pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-               printf("    PCIE1 connected to Slot 2 as %s (base addr %lx)\n",
-                               pcie_ep ? "Endpoint" : "Root Complex",
-                               pci_info[num].regs);
+               printf("PCIE1: connected to Slot 2 as %s (base addr %lx)\n",
+                       pcie_ep ? "Endpoint" : "Root Complex",
+                       pci_info[num].regs);
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie1_hose, first_free_busno);
        } else {
-               printf("    PCIE1: disabled\n");
+               printf("PCIE1: disabled\n");
        }
        puts("\n");
 #else
index a302b917677518bb50932cfa4ba348fe26af4539..0b8ea8192c9711bfe5aa517af4894a5be95f79a2 100644 (file)
@@ -59,10 +59,10 @@ int checkboard (void)
        puts("Board: MicroSys PM854\n");
 
 #ifdef CONFIG_PCI
-       printf("    PCI1: 32 bit, %d MHz (compiled)\n",
+       printf("PCI1: 32 bit, %d MHz (compiled)\n",
               CONFIG_SYS_CLK_FREQ / 1000000);
 #else
-       printf("    PCI1: disabled\n");
+       printf("PCI1: disabled\n");
 #endif
 
        /*
index f9d92d99846ddb1688e93745ff5d599bbceb5a36..4e059b08594fd038b545f184ac134af378110cc0 100644 (file)
@@ -213,10 +213,10 @@ int checkboard (void)
        puts("Board: MicroSys PM856\n");
 
 #ifdef CONFIG_PCI
-       printf("    PCI1: 32 bit, %d MHz (compiled)\n",
+       printf("PCI1: 32 bit, %d MHz (compiled)\n",
               CONFIG_SYS_CLK_FREQ / 1000000);
 #else
-       printf("    PCI1: disabled\n");
+       printf("PCI1: disabled\n");
 #endif
 
        /*
index 733979c6190e01d47cafadffeea064b062d0ffb7..272428fbf8027f1bbe7cda993a9cc04be02d328f 100644 (file)
@@ -342,7 +342,7 @@ pci_init_board(void)
                uint pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
                uint pci_speed = CONFIG_SYS_CLK_FREQ;   /* get_clock_freq() */
 
-               printf ("    PCI host: %d bit, %s MHz, %s, %s\n",
+               printf("PCI: Host, %d bit, %s MHz, %s, %s\n",
                        (pci_32) ? 32 : 64,
                        (pci_speed == 33000000) ? "33" :
                        (pci_speed == 66000000) ? "66" : "unknown",
@@ -353,7 +353,7 @@ pci_init_board(void)
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pci1_hose, first_free_busno);
        } else {
-               printf ("    PCI: disabled\n");
+               printf("PCI: disabled\n");
        }
 
        puts("\n");
@@ -368,11 +368,11 @@ pci_init_board(void)
 
        if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
                SET_STD_PCIE_INFO(pci_info[num], 1);
-               printf ("    PCIE at base address %lx\n", pci_info[num].regs);
+               printf("PCIE: base address %lx\n", pci_info[num].regs);
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie1_hose, first_free_busno);
        } else {
-               printf ("    PCIE: disabled\n");
+               printf("PCIE: disabled\n");
        }
 
        puts("\n");
index d954d2f6f74899c191f209248164e0887009aa9f..5bf2364ee2d7e00a70824eb204ced9585d9a3612 100644 (file)
@@ -221,29 +221,29 @@ void pci_init_board(void)
        if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
                SET_STD_PCIE_INFO(pci_info[num], 1);
                pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-               printf("    PCIE1 connected as %s (base addr %lx)\n",
-                               pcie_ep ? "Endpoint" : "Root Complex",
-                               pci_info[num].regs);
+               printf("PCIE1: connected as %s (base addr %lx)\n",
+                       pcie_ep ? "Endpoint" : "Root Complex",
+                       pci_info[num].regs);
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie1_hose, first_free_busno);
        } else {
-               puts("    PCIE1: disabled\n");
+               puts("PCIE1: disabled\n");
        }
 #else
-       puts("    PCIE1: disabled\n");
+       puts("PCIE1: disabled\n");
 #endif /* CONFIG_PCIE1 */
 
 #ifdef CONFIG_PCIE2
 
        SET_STD_PCIE_INFO(pci_info[num], 2);
        pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
-       printf("    PCIE2 connected as %s (base addr %lx)\n",
-                       pcie_ep ? "Endpoint" : "Root Complex",
-                       pci_info[num].regs);
+       printf("PCIE2: connected as %s (base addr %lx)\n",
+               pcie_ep ? "Endpoint" : "Root Complex",
+               pci_info[num].regs);
        first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                &pcie2_hose, first_free_busno);
 #else
-       puts("    PCIE2: disabled\n");
+       puts("PCIE2: disabled\n");
 #endif /* CONFIG_PCIE2 */
 }
 
index b21e7914c34d0a3bb244cfe4f2844ac702c2be95..527af6dd2ee84a39dc4bbb2453b1d6f87f029f17 100644 (file)
@@ -567,7 +567,7 @@ void pci_init_board (void)
        if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
                SET_STD_PCI_INFO(pci_info[num], 1);
                pcie_ep = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
-               printf ("\n   PCI1:  %d bit, %s MHz, %s, %s, %s\n",
+               printf("PCI1:  %d bit, %s MHz, %s, %s, %s\n",
                        (pci_32) ? 32 : 64,
                        (pci_speed == 33333333) ? "33" :
                        (pci_speed == 66666666) ? "66" : "unknown",
@@ -591,7 +591,7 @@ void pci_init_board (void)
                }
 #endif
        } else {
-               printf("    PCI1: disabled\n");
+               printf("PCI1: disabled\n");
        }
 #else
        setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1);
@@ -603,12 +603,12 @@ void pci_init_board (void)
        if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)) {
                SET_STD_PCIE_INFO(pci_info[num], 1);
                pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-               printf("    PCIE1 connected as %s\n",
+               printf("PCIE1: connected as %s\n",
                        pcie_ep ? "Endpoint" : "Root Complex");
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie1_hose, first_free_busno);
        } else {
-               printf("    PCIE1: disabled\n");
+               printf("PCIE1: disabled\n");
        }
 #else
        setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE);
index f425ceedc45664f90b48e13b3f84b3adb12f6429..4a0965bf08dfcaee9c8c24918c6eb52fc9dfa9e9 100644 (file)
@@ -95,7 +95,7 @@ void pci_init_board(void)
        if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
                SET_STD_PCI_INFO(pci_info[num], 1);
                pcie_ep = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
-               printf("\n    PCI1: %d bit %s, %s %d MHz, %s, %s\n",
+               printf("PCI1: %d bit %s, %s %d MHz, %s, %s\n",
                        pci_32 ? 32 : 64,
                        pcix ? "PCIX" : "PCI",
                        pci_spd_norm ? ">=" : "<=",
@@ -106,7 +106,7 @@ void pci_init_board(void)
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pci1_hose, first_free_busno);
        } else {
-               printf("    PCI1: disabled\n");
+               printf("PCI1: disabled\n");
        }
 #elif defined CONFIG_MPC8548
        /* PCI1 not present on MPC8572 */
@@ -119,12 +119,12 @@ void pci_init_board(void)
        if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE1)) {
                SET_STD_PCIE_INFO(pci_info[num], 1);
                pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-               printf("    PCIE1 connected as %s\n",
+               printf("PCIE1: connected as %s\n",
                        pcie_ep ? "Endpoint" : "Root Complex");
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie1_hose, first_free_busno);
        } else {
-               printf("    PCIE1: disabled\n");
+               printf("PCIE1: disabled\n");
        }
 #else
        setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE1);
@@ -136,12 +136,12 @@ void pci_init_board(void)
        if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE2)) {
                SET_STD_PCIE_INFO(pci_info[num], 2);
                pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
-               printf("    PCIE2 connected as %s\n",
+               printf("PCIE2: connected as %s\n",
                        pcie_ep ? "Endpoint" : "Root Complex");
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie2_hose, first_free_busno);
        } else {
-               printf("    PCIE2: disabled\n");
+               printf("PCIE2: disabled\n");
        }
 #else
        setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE2);
@@ -153,12 +153,12 @@ void pci_init_board(void)
        if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE3)) {
                SET_STD_PCIE_INFO(pci_info[num], 3);
                pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
-               printf("    PCIE3 connected as %s\n",
+               printf("PCIE3: connected as %s\n",
                        pcie_ep ? "Endpoint" : "Root Complex");
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie3_hose, first_free_busno);
        } else {
-               printf("    PCIE3: disabled\n");
+               printf("PCIE3: disabled\n");
        }
 #else
        setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE3);
index 45794dabed3924eaa252a6feb66b4944b89817ec..21cbb3baaabd43b24209689949d222ff9fac6965 100644 (file)
@@ -391,11 +391,11 @@ void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data)
         * 1 == pci agent or pcie end-point
         */
        if (!temp8) {
-               printf("               Scanning PCI bus %02x\n",
+               printf("           Scanning PCI bus %02x\n",
                        hose->current_busno);
                hose->last_busno = pci_hose_scan_bus(hose, hose->current_busno);
        } else {
-               debug("               Not scanning PCI bus %02x. PI=%x\n",
+               debug("           Not scanning PCI bus %02x. PI=%x\n",
                        hose->current_busno, temp8);
                hose->last_busno = hose->current_busno;
        }
@@ -482,9 +482,9 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info,
        }
 
        pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap);
-       printf("    PCI%s%x on bus %02x - %02x\n", pcie_cap == PCI_CAP_ID_EXP ?
-                       "E" : "", pci_info->pci_num,
-                       hose->first_busno, hose->last_busno);
+       printf("PCI%s%x: Bus %02x - %02x\n", pcie_cap == PCI_CAP_ID_EXP ?
+               "E" : "", pci_info->pci_num,
+               hose->first_busno, hose->last_busno);
 
        return(hose->last_busno + 1);
 }