arm64: zynqmp: Remove u-boot commands from dts files

U-Boot commands shouldn't be the part of kernel DTS files.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts
index 60d3f7103170ffff9766dd45ddda2b1df3933c45..9f2b46cf76772f78e5cdbc35b6f9b2c36b5f0415 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu102-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -144,12 +144,6 @@
        sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
 
        tca6416_u97: gpio@20 {
-               /*
-                * Enable all GTs to out from U-Boot
-                * i2c mw 20 6 0  - setup IO to output
-                * i2c mw 20 2 ef - setup output values on pins 0-7
-                * i2c mw 20 3 ff - setup output values on pins 10-17
-                */
                compatible = "ti,tca6416";
                reg = <0x20>;
                gpio-controller;
@@ -193,7 +187,7 @@
                };
        };
 
-       tca6416_u61: gpio@21 { /* FIXME enable it by i2c mw 21 6 0 */
+       tca6416_u61: gpio@21 {
                compatible = "ti,tca6416";
                reg = <0x21>;
                gpio-controller;
@@ -224,7 +218,7 @@
                #address-cells = <1>;
                #size-cells = <0>;
                reg = <0x75>;
-               i2c@0 { /* i2c mw 75 0 1 */
+               i2c@0 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <0>;
@@ -280,7 +274,7 @@
                                shunt-resistor = <5000>;
                        };
                };
-               i2c@1 { /* i2c mw 75 0 1 */
+               i2c@1 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <1>;
@@ -326,7 +320,7 @@
                                shunt-resistor = <5000>;
                        };
                };
-               i2c@2 { /* i2c mw 75 0 1 */
+               i2c@2 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <2>;
@@ -409,7 +403,7 @@
                #address-cells = <1>;
                #size-cells = <0>;
                reg = <0x74>;
-               i2c@0 { /* i2c mw 74 0 1 */
+               i2c@0 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <0>;
@@ -426,7 +420,7 @@
                                reg = <0x54>;
                        };
                };
-               i2c@1 { /* i2c mw 74 0 2 */
+               i2c@1 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <1>;
@@ -436,7 +430,7 @@
                        };
 
                };
-               i2c@2 { /* i2c mw 74 0 4 */
+               i2c@2 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <2>;
@@ -449,7 +443,7 @@
                                clock-frequency = <300000000>;
                        };
                };
-               i2c@3 { /* i2c mw 74 0 8 */
+               i2c@3 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <3>;
@@ -462,7 +456,7 @@
                                clock-frequency = <148500000>;
                        };
                };
-               i2c@4 { /* i2c mw 74 0 10 */
+               i2c@4 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <4>;
@@ -503,7 +497,7 @@
                        reg = <2>;
                        /* SYSMON */
                };
-               i2c@3 { /* i2c mw 75 0 8 */
+               i2c@3 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <3>;