]> git.sur5r.net Git - u-boot/commitdiff
Blackfin: use 8/16/32 bit transfer widths in dma_memcpy()
authorMike Frysinger <vapier@gentoo.org>
Wed, 5 Nov 2008 17:45:24 +0000 (12:45 -0500)
committerMike Frysinger <vapier@gentoo.org>
Mon, 2 Feb 2009 17:24:46 +0000 (12:24 -0500)
Rather than using 8bit transfers for everything, use 8/16/32 bit transfers
as usable with the source/destination addresses and the count size.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
lib_blackfin/string.c

index e4587184465aaefef1723cd4a712cbbc52b043d6..12b6d24058c169013f126f58edd3f8213059cf91 100644 (file)
@@ -136,6 +136,8 @@ int strncmp(const char *cs, const char *ct, size_t count)
  */
 void dma_memcpy_nocache(void *dst, const void *src, size_t count)
 {
+       uint16_t wdsize, mod;
+
        /* Disable DMA in case it's still running (older u-boot's did not
         * always turn them off).  Do it before the if statement below so
         * we can be cheap and not do a SSYNC() due to the forced abort.
@@ -151,24 +153,37 @@ void dma_memcpy_nocache(void *dst, const void *src, size_t count)
             (unsigned long)dst < L1_SRAM_SCRATCH_END))
                hang();
 
+       if (((unsigned long)dst | (unsigned long)src | count) & 0x1) {
+               wdsize = WDSIZE_8;
+               mod = 1;
+       } else if (((unsigned long)dst | (unsigned long)src | count) & 0x2) {
+               wdsize = WDSIZE_16;
+               count >>= 1;
+               mod = 2;
+       } else {
+               wdsize = WDSIZE_32;
+               count >>= 2;
+               mod = 4;
+       }
+
        /* Copy sram functions from sdram to sram */
        /* Setup destination start address */
        bfin_write_MDMA_D0_START_ADDR(dst);
        /* Setup destination xcount */
        bfin_write_MDMA_D0_X_COUNT(count);
        /* Setup destination xmodify */
-       bfin_write_MDMA_D0_X_MODIFY(1);
+       bfin_write_MDMA_D0_X_MODIFY(mod);
 
        /* Setup Source start address */
        bfin_write_MDMA_S0_START_ADDR(src);
        /* Setup Source xcount */
        bfin_write_MDMA_S0_X_COUNT(count);
        /* Setup Source xmodify */
-       bfin_write_MDMA_S0_X_MODIFY(1);
+       bfin_write_MDMA_S0_X_MODIFY(mod);
 
        /* Enable source DMA */
-       bfin_write_MDMA_S0_CONFIG(DMAEN);
-       bfin_write_MDMA_D0_CONFIG(WNR | DMAEN | DI_EN);
+       bfin_write_MDMA_S0_CONFIG(wdsize | DMAEN);
+       bfin_write_MDMA_D0_CONFIG(wdsize | DMAEN | WNR | DI_EN);
        SSYNC();
 
        while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE))