]> git.sur5r.net Git - u-boot/commitdiff
add new board pm9g45
authorAsen Dimov <dimov@ronetix.at>
Tue, 20 Apr 2010 19:49:04 +0000 (22:49 +0300)
committerTom <Tom@bumblecow.com>
Sun, 6 Jun 2010 13:36:28 +0000 (08:36 -0500)
Add the new board PM9G45 from Ronetix GmbH.
* AT91SAM9G45 MCU at 400Mhz.
* 128MB DDR2 SDRAM
* 256MB NAND
* 10/100 MBits Ethernet DP83848
* Serial number chip DS2401

The board is made as SODIMM200 module.
For more info www.ronatix.at or info@ronetix.at.

Signed-off-by: Asen Dimov <dimov@ronetix.at>
MAINTAINERS
MAKEALL
Makefile
board/ronetix/pm9g45/Makefile [new file with mode: 0644]
board/ronetix/pm9g45/config.mk [new file with mode: 0644]
board/ronetix/pm9g45/pm9g45.c [new file with mode: 0644]
include/configs/pm9g45.h [new file with mode: 0644]

index 5cbc8456394464a9d3abb8f0fe15f0400cb29506..380e78512891831f4b1286c684f0de87a245bb32 100644 (file)
@@ -228,6 +228,7 @@ Ilko Iliev <iliev@ronetix.at>
 
        PM9261          AT91SAM9261
        PM9263          AT91SAM9263
+       PM9G45          ARM926EJS (AT91SAM9G45 SoC)
 
 Gary Jennejohn <garyj@denx.de>
 
diff --git a/MAKEALL b/MAKEALL
index bb09627e33fe004da13a98e80ad2940d9ea4d22b..ee465904eb0e81cfda1d6582449178a29c375617 100755 (executable)
--- a/MAKEALL
+++ b/MAKEALL
@@ -682,6 +682,7 @@ LIST_at91="                 \
        otc570                  \
        pm9261                  \
        pm9263                  \
+       pm9g45                  \
        SBC35_A9G20             \
        TNY_A9260               \
        TNY_A9G20               \
index 686e6fbeb051f947b011b3e2891ada7ea9b74b20..cbe7a793576b00fcc7bd2b64309699a77d55731c 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -2873,6 +2873,10 @@ otc570_config    :       unconfig
 pm9263_config  :       unconfig
        @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
 
+pm9g45_config  :       unconfig
+       @mkdir -p $(obj)include
+       @$(MKCONFIG) -a pm9g45 arm arm926ejs pm9g45 ronetix at91
+
 SBC35_A9G20_NANDFLASH_config \
 SBC35_A9G20_EEPROM_config \
 SBC35_A9G20_config     :       unconfig
diff --git a/board/ronetix/pm9g45/Makefile b/board/ronetix/pm9g45/Makefile
new file mode 100644 (file)
index 0000000..dd5b02e
--- /dev/null
@@ -0,0 +1,54 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB    = $(obj)lib$(BOARD).a
+
+COBJS-y += pm9g45.o
+
+SRCS   := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS   := $(addprefix $(obj),$(COBJS-y))
+SOBJS  := $(addprefix $(obj),$(SOBJS))
+
+$(LIB):        $(obj).depend $(OBJS) $(SOBJS)
+       $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+       rm -f $(SOBJS) $(OBJS)
+
+distclean:     clean
+       rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/ronetix/pm9g45/config.mk b/board/ronetix/pm9g45/config.mk
new file mode 100644 (file)
index 0000000..7fe9d03
--- /dev/null
@@ -0,0 +1 @@
+TEXT_BASE = 0x73f00000
diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c
new file mode 100644 (file)
index 0000000..3b4d9a3
--- /dev/null
@@ -0,0 +1,188 @@
+/*
+ * (C) Copyright 2010
+ * Ilko Iliev <iliev@ronetix.at>
+ * Asen Dimov <dimov@ronetix.at>
+ * Ronetix GmbH <www.ronetix.at>
+ *
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/sizes.h>
+#include <asm/arch/at91sam9g45.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_matrix.h>
+#include <asm/arch/at91_pio.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
+#include <net.h>
+#endif
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+#ifdef CONFIG_CMD_NAND
+static void pm9g45_nand_hw_init(void)
+{
+       unsigned long csa;
+       at91_smc_t      *smc    = (at91_smc_t *) AT91_SMC_BASE;
+       at91_matrix_t   *matrix = (at91_matrix_t *) AT91_MATRIX_BASE;
+       at91_pmc_t      *pmc    = (at91_pmc_t *) AT91_PMC_BASE;
+
+       /* Enable CS3 */
+       csa = readl(&matrix->ccr[6]) | AT91_MATRIX_CSA_EBI_CS3A;
+       writel(csa, &matrix->ccr[6]);
+
+       /* Configure SMC CS3 for NAND/SmartMedia */
+       writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
+               AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
+               &smc->cs[3].setup);
+
+       writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(3) |
+               AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(2),
+               &smc->cs[3].pulse);
+
+       writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(4),
+               &smc->cs[3].cycle);
+
+       writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+               AT91_SMC_MODE_EXNW_DISABLE |
+               AT91_SMC_MODE_DBW_8 |
+               AT91_SMC_MODE_TDF_CYCLE(3),
+               &smc->cs[3].mode);
+
+       writel(1 << AT91SAM9G45_ID_PIOC, &pmc->pcer);
+
+#ifdef CONFIG_SYS_NAND_READY_PIN
+       /* Configure RDY/BSY */
+       at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+#endif
+
+       /* Enable NandFlash */
+       at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+}
+#endif
+
+#ifdef CONFIG_MACB
+static void pm9g45_macb_hw_init(void)
+{
+       at91_pmc_t      *pmc    = (at91_pmc_t *) AT91_PMC_BASE;
+       at91_pio_t      *pio    = (at91_pio_t *) AT91_PIO_BASE;
+
+       /*
+        * PD2 enables the 50MHz oscillator for Ethernet PHY
+        * 1 - enable
+        * 0 - disable
+        */
+       at91_set_pio_output(AT91_PIO_PORTD, 2, 1);
+       at91_set_pio_value(AT91_PIO_PORTD, 2, 1); /* 1- enable, 0 - disable */
+
+       /* Enable clock */
+       writel(1 << AT91SAM9G45_ID_EMAC, &pmc->pcer);
+
+       /*
+        * Disable pull-up on:
+        *      RXDV (PA15) => PHY normal mode (not Test mode)
+        *      ERX0 (PA12) => PHY ADDR0
+        *      ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0
+        *
+        * PHY has internal pull-down
+        */
+       at91_set_pio_pullup(AT91_PIO_PORTA, 15, 0);
+       at91_set_pio_pullup(AT91_PIO_PORTA, 12, 0);
+       at91_set_pio_pullup(AT91_PIO_PORTA, 13, 0);
+
+       /* Re-enable pull-up */
+       at91_set_pio_pullup(AT91_PIO_PORTA, 15, 1);
+       at91_set_pio_pullup(AT91_PIO_PORTA, 12, 1);
+       at91_set_pio_pullup(AT91_PIO_PORTA, 13, 1);
+
+       at91_macb_hw_init();
+}
+#endif
+
+int board_init(void)
+{
+       at91_pmc_t      *pmc    = (at91_pmc_t *) AT91_PMC_BASE;
+
+       /* Enable Ctrlc */
+       console_init_f();
+
+       writel((1 << AT91SAM9G45_ID_PIOA) |
+               (1 << AT91SAM9G45_ID_PIOB) |
+               (1 << AT91SAM9G45_ID_PIOC) |
+               (1 << AT91SAM9G45_ID_PIODE), &pmc->pcer);
+
+       /* arch number of AT91SAM9M10G45EK-Board */
+       gd->bd->bi_arch_number = MACH_TYPE_PM9G45;
+       /* adress of boot parameters */
+       gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+       at91_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+       pm9g45_nand_hw_init();
+#endif
+
+#ifdef CONFIG_MACB
+       pm9g45_macb_hw_init();
+#endif
+       return 0;
+}
+
+int dram_init(void)
+{
+       gd->bd->bi_dram[0].start = PHYS_SDRAM;
+       gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+       return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+#ifdef CONFIG_MACB
+       /*
+        * Initialize ethernet HW addr prior to starting Linux,
+        * needed for nfsroot
+        */
+       eth_init(gd->bd);
+#endif
+}
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+       int rc = 0;
+#ifdef CONFIG_MACB
+       rc = macb_eth_initialize(0, (void *)AT91_EMAC_BASE, 0x01);
+#endif
+       return rc;
+}
diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
new file mode 100644 (file)
index 0000000..690f119
--- /dev/null
@@ -0,0 +1,186 @@
+/*
+ * (C) Copyright 2010
+ * Ilko Iliev <iliev@ronetix.at>
+ * Asen Dimov <dimov@ronetix.at>
+ * Ronetix GmbH <www.ronetix.at>
+ *
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * Configuation settings for the PM9G45 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_ARM926EJS       1       /* This is an ARM926EJS Core */
+#define CONFIG_PM9G45          1       /* It's an Ronetix PM9G45 */
+#define CONFIG_AT91SAM9G45     1       /* It's an Atmel AT91SAM9G45 SoC */
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_MAIN_CLOCK     12000000 /* from 12 MHz crystal */
+#define CONFIG_SYS_HZ                  1000
+
+#define CONFIG_ARCH_CPU_INIT
+
+#define CONFIG_CMDLINE_TAG     1       /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG      1
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_AT91_GPIO       1
+#define CONFIG_ATMEL_USART     1
+#define CONFIG_USART3          1       /* USART 3 is DBGU */
+
+#define CONFIG_SYS_USE_NANDFLASH       1
+
+/* LED */
+#define CONFIG_AT91_LED
+#define        CONFIG_RED_LED          AT91_PIO_PORTD, 31 /* this is the user1 led */
+#define        CONFIG_GREEN_LED        AT91_PIO_PORTD, 0 /* this is the user2 led */
+
+#define CONFIG_BOOTDELAY       3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE      1
+#define CONFIG_BOOTP_BOOTPATH          1
+#define CONFIG_BOOTP_GATEWAY           1
+#define CONFIG_BOOTP_HOSTNAME          1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_CMD_PING                1
+#define CONFIG_CMD_DHCP                1
+#define CONFIG_CMD_NAND                1
+#define CONFIG_CMD_USB         1
+
+#define CONFIG_CMD_JFFS2               1
+#define CONFIG_JFFS2_CMDLINE           1
+#define CONFIG_JFFS2_NAND              1
+#define CONFIG_JFFS2_DEV               "nand0" /* NAND dev jffs2 lives on */
+#define CONFIG_JFFS2_PART_OFFSET       0       /* start of jffs2 partition */
+#define CONFIG_JFFS2_PART_SIZE         (256 * 1024 * 1024) /* partition */
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS           1
+#define PHYS_SDRAM                     0x70000000
+#define PHYS_SDRAM_SIZE                        0x08000000      /* 128 megs */
+
+/* NOR flash, not available */
+#define CONFIG_SYS_NO_FLASH            1
+#undef CONFIG_CMD_FLASH
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_MAX_CHIPS          1
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE     1
+#define CONFIG_SYS_NAND_BASE           0x40000000
+#define CONFIG_SYS_NAND_DBW_8          1
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE       (1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE       (1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN     AT91_PIO_PORTC, 14
+#define CONFIG_SYS_NAND_READY_PIN      AT91_PIO_PORTD, 3
+
+#endif
+
+/* Ethernet */
+#define CONFIG_MACB                    1
+#define CONFIG_RMII                    1
+#define CONFIG_NET_MULTI               1
+#define CONFIG_NET_RETRY_COUNT         20
+#define CONFIG_RESET_PHY_R             1
+
+/* USB */
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW            1
+#define CONFIG_DOS_PARTITION           1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT   1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE  0x00700000 /* _UHP_OHCI_BASE */
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME  "at91sam9g45"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
+#define CONFIG_USB_STORAGE             1
+
+/* board specific(not enough SRAM) */
+#define CONFIG_AT91SAM9G45_LCD_BASE    PHYS_SDRAM + 0xE00000
+
+#define CONFIG_SYS_LOAD_ADDR           PHYS_SDRAM + 0x2000000 /* load addr */
+
+#define CONFIG_SYS_MEMTEST_START       PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END         CONFIG_AT91SAM9G45_LCD_BASE
+
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CONFIG_ENV_IS_IN_NAND          1
+#define CONFIG_ENV_OFFSET              0x60000
+#define CONFIG_ENV_OFFSET_REDUND       0x80000
+#define CONFIG_ENV_SIZE                        0x20000         /* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND     "nand read 0x72000000 0x200000 0x200000; bootm"
+#define CONFIG_BOOTARGS                "fbcon=rotate:3 console=tty0 " \
+                               "console=ttyS0,115200 " \
+                               "root=/dev/mtdblock4 " \
+                               "mtdparts=atmel_nand:128k(bootstrap)ro," \
+                               "256k(uboot)ro,1664k(env)," \
+                               "2M(linux)ro,-(root) rw " \
+                               "rootfstype=jffs2"
+
+#define CONFIG_BAUDRATE                        115200
+#define CONFIG_SYS_BAUDRATE_TABLE      {115200 , 19200, 38400, 57600, 9600 }
+
+#define CONFIG_SYS_PROMPT              "U-Boot> "
+#define CONFIG_SYS_CBSIZE              256
+#define CONFIG_SYS_MAXARGS             16
+#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
+                                       sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP            1
+#define CONFIG_CMDLINE_EDITING         1
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN          ROUND(3 * CONFIG_ENV_SIZE + 128*1024,\
+                                       0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE       128 /* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE               (32*1024)       /* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif