zynq-zc770-xm013.dtb
dtb-$(CONFIG_ARCH_ZYNQMP) += \
zynqmp-ep108.dtb \
- zynqmp-zcu102.dtb \
+ zynqmp-zcu102-revA.dtb \
zynqmp-zcu102-revB.dtb \
zynqmp-zc1751-xm015-dc1.dtb \
zynqmp-zc1751-xm016-dc2.dtb \
--- /dev/null
+/*
+ * dts file for Xilinx ZynqMP ZCU102
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "ZynqMP ZCU102 RevA";
+ compatible = "xlnx,zynqmp-zcu102-revA", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
+
+ aliases {
+ ethernet0 = &gem3;
+ gpio0 = &gpio;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ mmc0 = &sdhci1;
+ rtc0 = &rtc;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &dcc;
+ spi0 = &qspi;
+ usb0 = &usb0;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+ sw19 {
+ label = "sw19";
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ linux,code = <108>; /* down */
+ gpio-key,wakeup;
+ autorepeat;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ heartbeat_led {
+ label = "heartbeat";
+ gpios = <&gpio 23 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&can1 {
+ status = "okay";
+};
+
+&dcc {
+ status = "okay";
+};
+
+/* fpd_dma clk 667MHz, lpd_dma 500MHz */
+&fpd_dma_chan1 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+ xlnx,overfetch; /* for testing purpose */
+ xlnx,ratectrl = <0>; /* for testing purpose */
+ xlnx,src-issue = <31>;
+};
+
+&fpd_dma_chan2 {
+ status = "okay";
+ xlnx,ratectrl = <100>; /* for testing purpose */
+ xlnx,src-issue = <4>; /* for testing purpose */
+};
+
+&fpd_dma_chan3 {
+ status = "okay";
+};
+
+&fpd_dma_chan4 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan5 {
+ status = "okay";
+};
+
+&fpd_dma_chan6 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan7 {
+ status = "okay";
+};
+
+&fpd_dma_chan8 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&gem3 {
+ status = "okay";
+ local-mac-address = [00 0a 35 00 02 90];
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ phy0: phy@21 {
+ reg = <21>;
+ ti,rx-internal-delay = <0x8>;
+ ti,tx-internal-delay = <0xa>;
+ ti,fifo-depth = <0x1>;
+ };
+};
+
+&gpio {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tca6416_u97: gpio@20 {
+ /*
+ * Enable all GTs to out from U-Boot
+ * i2c mw 20 6 0 - setup IO to output
+ * i2c mw 20 2 ef - setup output values on pins 0-7
+ * i2c mw 20 3 ff - setup output values on pins 10-17
+ */
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /*
+ * IRQ not connected
+ * Lines:
+ * 0 - PS_GTR_LAN_SEL0
+ * 1 - PS_GTR_LAN_SEL1
+ * 2 - PS_GTR_LAN_SEL2
+ * 3 - PS_GTR_LAN_SEL3
+ * 4 - PCI_CLK_DIR_SEL
+ * 5 - IIC_MUX_RESET_B
+ * 6 - GEM3_EXP_RESET_B
+ * 7, 10 - 17 - not connected
+ */
+
+ gtr_sel0 {
+ gpio-hog;
+ gpios = <0 0>;
+ output-high; /* PCIE = 0, DP = 1 */
+ line-name = "sel0";
+ };
+ gtr_sel1 {
+ gpio-hog;
+ gpios = <1 0>;
+ output-high; /* PCIE = 0, DP = 1 */
+ line-name = "sel1";
+ };
+ gtr_sel2 {
+ gpio-hog;
+ gpios = <2 0>;
+ output-high; /* PCIE = 0, USB0 = 1 */
+ line-name = "sel2";
+ };
+ gtr_sel3 {
+ gpio-hog;
+ gpios = <3 0>;
+ output-high; /* PCIE = 0, SATA = 1 */
+ line-name = "sel3";
+ };
+ };
+
+ tca6416_u61: gpio@21 { /* FIXME enable it by i2c mw 21 6 0 */
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /*
+ * IRQ not connected
+ * Lines:
+ * 0 - VCCPSPLL_EN
+ * 1 - MGTRAVCC_EN
+ * 2 - MGTRAVTT_EN
+ * 3 - VCCPSDDRPLL_EN
+ * 4 - MIO26_PMU_INPUT_LS
+ * 5 - PL_PMBUS_ALERT
+ * 6 - PS_PMBUS_ALERT
+ * 7 - MAXIM_PMBUS_ALERT
+ * 10 - PL_DDR4_VTERM_EN
+ * 11 - PL_DDR4_VPP_2V5_EN
+ * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON
+ * 13 - PS_DIMM_SUSPEND_EN
+ * 14 - PS_DDR4_VTERM_EN
+ * 15 - PS_DDR4_VPP_2V5_EN
+ * 16 - 17 - not connected
+ */
+ };
+
+ i2cswitch@75 { /* u60 */
+ compatible = "nxp,pca9544";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ i2c@0 { /* i2c mw 75 0 1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* PS_PMBUS */
+ ina226@40 { /* u76 */
+ compatible = "ti,ina226";
+ reg = <0x40>;
+ shunt-resistor = <5000>;
+ };
+ ina226@41 { /* u77 */
+ compatible = "ti,ina226";
+ reg = <0x41>;
+ shunt-resistor = <5000>;
+ };
+ ina226@42 { /* u78 */
+ compatible = "ti,ina226";
+ reg = <0x42>;
+ shunt-resistor = <5000>;
+ };
+ ina226@43 { /* u87 */
+ compatible = "ti,ina226";
+ reg = <0x43>;
+ shunt-resistor = <5000>;
+ };
+ ina226@44 { /* u85 */
+ compatible = "ti,ina226";
+ reg = <0x44>;
+ shunt-resistor = <5000>;
+ };
+ ina226@45 { /* u86 */
+ compatible = "ti,ina226";
+ reg = <0x45>;
+ shunt-resistor = <5000>;
+ };
+ ina226@46 { /* u93 */
+ compatible = "ti,ina226";
+ reg = <0x46>;
+ shunt-resistor = <5000>;
+ };
+ ina226@47 { /* u88 */
+ compatible = "ti,ina226";
+ reg = <0x47>;
+ shunt-resistor = <5000>;
+ };
+ ina226@4a { /* u15 */
+ compatible = "ti,ina226";
+ reg = <0x4a>;
+ shunt-resistor = <5000>;
+ };
+ ina226@4b { /* u92 */
+ compatible = "ti,ina226";
+ reg = <0x4b>;
+ shunt-resistor = <5000>;
+ };
+ };
+ i2c@1 { /* i2c mw 75 0 1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* PL_PMBUS */
+ ina226@40 { /* u79 */
+ compatible = "ti,ina226";
+ reg = <0x40>;
+ shunt-resistor = <2000>;
+ };
+ ina226@41 { /* u81 */
+ compatible = "ti,ina226";
+ reg = <0x41>;
+ shunt-resistor = <5000>;
+ };
+ ina226@42 { /* u80 */
+ compatible = "ti,ina226";
+ reg = <0x42>;
+ shunt-resistor = <5000>;
+ };
+ ina226@43 { /* u84 */
+ compatible = "ti,ina226";
+ reg = <0x43>;
+ shunt-resistor = <5000>;
+ };
+ ina226@44 { /* u16 */
+ compatible = "ti,ina226";
+ reg = <0x44>;
+ shunt-resistor = <5000>;
+ };
+ ina226@45 { /* u65 */
+ compatible = "ti,ina226";
+ reg = <0x45>;
+ shunt-resistor = <5000>;
+ };
+ ina226@46 { /* u74 */
+ compatible = "ti,ina226";
+ reg = <0x46>;
+ shunt-resistor = <5000>;
+ };
+ ina226@47 { /* u75 */
+ compatible = "ti,ina226";
+ reg = <0x47>;
+ shunt-resistor = <5000>;
+ };
+ };
+ i2c@2 { /* i2c mw 75 0 1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ /* MAXIM_PMBUS - 00 */
+ max15301@a { /* u46 */
+ compatible = "max15301";
+ reg = <0xa>;
+ };
+ max15303@b { /* u4 */
+ compatible = "max15303";
+ reg = <0xb>;
+ };
+ max15303@10 { /* u13 */
+ compatible = "max15303";
+ reg = <0x10>;
+ };
+ max15301@13 { /* u47 */
+ compatible = "max15301";
+ reg = <0x13>;
+ };
+ max15303@14 { /* u7 */
+ compatible = "max15303";
+ reg = <0x14>;
+ };
+ max15303@15 { /* u6 */
+ compatible = "max15303";
+ reg = <0x15>;
+ };
+ max15303@16 { /* u10 */
+ compatible = "max15303";
+ reg = <0x16>;
+ };
+ max15303@17 { /* u9 */
+ compatible = "max15303";
+ reg = <0x17>;
+ };
+ max15301@18 { /* u63 */
+ compatible = "max15301";
+ reg = <0x18>;
+ };
+ max15303@1a { /* u49 */
+ compatible = "max15303";
+ reg = <0x1a>;
+ };
+ max15303@1d { /* u18 */
+ compatible = "max15303";
+ reg = <0x1d>;
+ };
+ max15303@20 { /* u8 */
+ compatible = "max15303";
+ status = "disabled"; /* unreachable */
+ reg = <0x20>;
+ };
+
+/* drivers/hwmon/pmbus/Kconfig:86: be called max20751.
+drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751) += max20751.o
+*/
+ max20751@72 { /* u95 FIXME - not detected */
+ compatible = "max20751";
+ reg = <0x72>;
+ };
+ max20751@73 { /* u96 FIXME - not detected */
+ compatible = "max20751";
+ reg = <0x73>;
+ };
+ };
+ /* Bus 3 is not connected */
+ };
+
+ /* FIXME PMOD - j160 */
+ /* FIXME MSP430F - u41 - not detected */
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+ /* FIXME PL i2c via PCA9306 - u45 */
+ /* FIXME MSP430 - u41 - not detected */
+ i2cswitch@74 { /* u34 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ i2c@0 { /* i2c mw 74 0 1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /*
+ * IIC_EEPROM 1kB memory which uses 256B blocks
+ * where every block has different address.
+ * 0 - 256B address 0x54
+ * 256B - 512B address 0x55
+ * 512B - 768B address 0x56
+ * 768B - 1024B address 0x57
+ */
+ eeprom@54 { /* u23 */
+ compatible = "at,24c08";
+ reg = <0x54>;
+ };
+ };
+ i2c@1 { /* i2c mw 74 0 2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ si5341: clock-generator1@36 { /* SI5341 - u69 */
+ compatible = "si5341";
+ reg = <0x36>;
+ };
+
+ };
+ i2c@2 { /* i2c mw 74 0 4 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ si570_1: clock-generator2@5d { /* USER SI570 - u42 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>;
+ factory-fout = <300000000>;
+ clock-frequency = <300000000>;
+ };
+ };
+ i2c@3 { /* i2c mw 74 0 8 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ si570_2: clock-generator3@5d { /* USER MGT SI570 - u56 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>; /* copy from zc702 */
+ factory-fout = <156250000>;
+ clock-frequency = <148500000>;
+ };
+ };
+ i2c@4 { /* i2c mw 74 0 10 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ si5328: clock-generator4@69 {/* SI5328 - u20 */
+ compatible = "silabs,si5328";
+ reg = <0x69>;
+ };
+ };
+ /* 5 - 7 unconnected */
+ };
+
+ i2cswitch@75 {
+ compatible = "nxp,pca9548"; /* u135 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* HPC0_IIC */
+ };
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* HPC1_IIC */
+ };
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ /* SYSMON */
+ };
+ i2c@3 { /* i2c mw 75 0 8 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ /* DDR4 SODIMM */
+ dev@19 { /* u-boot detection */
+ compatible = "xxx";
+ reg = <0x19>;
+ };
+ dev@30 { /* u-boot detection */
+ compatible = "xxx";
+ reg = <0x30>;
+ };
+ dev@35 { /* u-boot detection */
+ compatible = "xxx";
+ reg = <0x35>;
+ };
+ dev@36 { /* u-boot detection */
+ compatible = "xxx";
+ reg = <0x36>;
+ };
+ dev@51 { /* u-boot detection - maybe SPD */
+ compatible = "xxx";
+ reg = <0x51>;
+ };
+ };
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ /* SEP 3 */
+ };
+ i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ /* SEP 2 */
+ };
+ i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ /* SEP 1 */
+ };
+ i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ /* SEP 0 */
+ };
+ };
+};
+
+&pcie {
+/* status = "okay"; */
+};
+
+&qspi {
+ status = "okay";
+ is-dual = <1>;
+ flash@0 {
+ compatible = "m25p80"; /* 32MB */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+ spi-max-frequency = <108000000>; /* Based on DC1 spec */
+ partition@qspi-fsbl-uboot { /* for testing purpose */
+ label = "qspi-fsbl-uboot";
+ reg = <0x0 0x100000>;
+ };
+ partition@qspi-linux { /* for testing purpose */
+ label = "qspi-linux";
+ reg = <0x100000 0x500000>;
+ };
+ partition@qspi-device-tree { /* for testing purpose */
+ label = "qspi-device-tree";
+ reg = <0x600000 0x20000>;
+ };
+ partition@qspi-rootfs { /* for testing purpose */
+ label = "qspi-rootfs";
+ reg = <0x620000 0x5E0000>;
+ };
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+ /* SATA OOB timing settings */
+ ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+ ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+ ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+ ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+ ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+ status = "okay";
+ no-1-8-v; /* for 1.0 silicon */
+ xlnx,mio_bank = <1>;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+ status = "okay";
+};
+
+&dwc3_0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&xilinx_drm {
+ status = "okay";
+ clocks = <&si570_1>;
+};
+
+&xlnx_dp {
+ status = "okay";
+};
+
+&xlnx_dp_sub {
+ status = "okay";
+ xlnx,vid-clk-pl;
+};
+
+&xlnx_dp_snd_pcm0 {
+ status = "okay";
+};
+
+&xlnx_dp_snd_pcm1 {
+ status = "okay";
+};
+
+&xlnx_dp_snd_card {
+ status = "okay";
+};
+
+&xlnx_dp_snd_codec0 {
+ status = "okay";
+};
+
+&xlnx_dpdma {
+ status = "okay";
+};
* SPDX-License-Identifier: GPL-2.0+
*/
-#include "zynqmp-zcu102.dts"
+#include "zynqmp-zcu102-revA.dts"
/ {
model = "ZynqMP ZCU102 RevB";
+++ /dev/null
-/*
- * dts file for Xilinx ZynqMP ZCU102
- *
- * (C) Copyright 2015, Xilinx, Inc.
- *
- * Michal Simek <michal.simek@xilinx.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/dts-v1/;
-
-#include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "ZynqMP ZCU102 RevA";
- compatible = "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
-
- aliases {
- ethernet0 = &gem3;
- gpio0 = &gpio;
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- mmc0 = &sdhci1;
- rtc0 = &rtc;
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &dcc;
- spi0 = &qspi;
- usb0 = &usb0;
- };
-
- chosen {
- bootargs = "earlycon";
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- autorepeat;
- sw19 {
- label = "sw19";
- gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
- linux,code = <108>; /* down */
- gpio-key,wakeup;
- autorepeat;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- heartbeat_led {
- label = "heartbeat";
- gpios = <&gpio 23 0>;
- linux,default-trigger = "heartbeat";
- };
- };
-};
-
-&can1 {
- status = "okay";
-};
-
-&dcc {
- status = "okay";
-};
-
-/* fpd_dma clk 667MHz, lpd_dma 500MHz */
-&fpd_dma_chan1 {
- status = "okay";
- xlnx,include-sg; /* for testing purpose */
- xlnx,overfetch; /* for testing purpose */
- xlnx,ratectrl = <0>; /* for testing purpose */
- xlnx,src-issue = <31>;
-};
-
-&fpd_dma_chan2 {
- status = "okay";
- xlnx,ratectrl = <100>; /* for testing purpose */
- xlnx,src-issue = <4>; /* for testing purpose */
-};
-
-&fpd_dma_chan3 {
- status = "okay";
-};
-
-&fpd_dma_chan4 {
- status = "okay";
- xlnx,include-sg; /* for testing purpose */
-};
-
-&fpd_dma_chan5 {
- status = "okay";
-};
-
-&fpd_dma_chan6 {
- status = "okay";
- xlnx,include-sg; /* for testing purpose */
-};
-
-&fpd_dma_chan7 {
- status = "okay";
-};
-
-&fpd_dma_chan8 {
- status = "okay";
- xlnx,include-sg; /* for testing purpose */
-};
-
-&gem3 {
- status = "okay";
- local-mac-address = [00 0a 35 00 02 90];
- phy-handle = <&phy0>;
- phy-mode = "rgmii-id";
- phy0: phy@21 {
- reg = <21>;
- ti,rx-internal-delay = <0x8>;
- ti,tx-internal-delay = <0xa>;
- ti,fifo-depth = <0x1>;
- };
-};
-
-&gpio {
- status = "okay";
-};
-
-&gpu {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
- clock-frequency = <400000>;
-
- tca6416_u97: gpio@20 {
- /*
- * Enable all GTs to out from U-Boot
- * i2c mw 20 6 0 - setup IO to output
- * i2c mw 20 2 ef - setup output values on pins 0-7
- * i2c mw 20 3 ff - setup output values on pins 10-17
- */
- compatible = "ti,tca6416";
- reg = <0x20>;
- gpio-controller;
- #gpio-cells = <2>;
- /*
- * IRQ not connected
- * Lines:
- * 0 - PS_GTR_LAN_SEL0
- * 1 - PS_GTR_LAN_SEL1
- * 2 - PS_GTR_LAN_SEL2
- * 3 - PS_GTR_LAN_SEL3
- * 4 - PCI_CLK_DIR_SEL
- * 5 - IIC_MUX_RESET_B
- * 6 - GEM3_EXP_RESET_B
- * 7, 10 - 17 - not connected
- */
-
- gtr_sel0 {
- gpio-hog;
- gpios = <0 0>;
- output-high; /* PCIE = 0, DP = 1 */
- line-name = "sel0";
- };
- gtr_sel1 {
- gpio-hog;
- gpios = <1 0>;
- output-high; /* PCIE = 0, DP = 1 */
- line-name = "sel1";
- };
- gtr_sel2 {
- gpio-hog;
- gpios = <2 0>;
- output-high; /* PCIE = 0, USB0 = 1 */
- line-name = "sel2";
- };
- gtr_sel3 {
- gpio-hog;
- gpios = <3 0>;
- output-high; /* PCIE = 0, SATA = 1 */
- line-name = "sel3";
- };
- };
-
- tca6416_u61: gpio@21 { /* FIXME enable it by i2c mw 21 6 0 */
- compatible = "ti,tca6416";
- reg = <0x21>;
- gpio-controller;
- #gpio-cells = <2>;
- /*
- * IRQ not connected
- * Lines:
- * 0 - VCCPSPLL_EN
- * 1 - MGTRAVCC_EN
- * 2 - MGTRAVTT_EN
- * 3 - VCCPSDDRPLL_EN
- * 4 - MIO26_PMU_INPUT_LS
- * 5 - PL_PMBUS_ALERT
- * 6 - PS_PMBUS_ALERT
- * 7 - MAXIM_PMBUS_ALERT
- * 10 - PL_DDR4_VTERM_EN
- * 11 - PL_DDR4_VPP_2V5_EN
- * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON
- * 13 - PS_DIMM_SUSPEND_EN
- * 14 - PS_DDR4_VTERM_EN
- * 15 - PS_DDR4_VPP_2V5_EN
- * 16 - 17 - not connected
- */
- };
-
- i2cswitch@75 { /* u60 */
- compatible = "nxp,pca9544";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x75>;
- i2c@0 { /* i2c mw 75 0 1 */
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- /* PS_PMBUS */
- ina226@40 { /* u76 */
- compatible = "ti,ina226";
- reg = <0x40>;
- shunt-resistor = <5000>;
- };
- ina226@41 { /* u77 */
- compatible = "ti,ina226";
- reg = <0x41>;
- shunt-resistor = <5000>;
- };
- ina226@42 { /* u78 */
- compatible = "ti,ina226";
- reg = <0x42>;
- shunt-resistor = <5000>;
- };
- ina226@43 { /* u87 */
- compatible = "ti,ina226";
- reg = <0x43>;
- shunt-resistor = <5000>;
- };
- ina226@44 { /* u85 */
- compatible = "ti,ina226";
- reg = <0x44>;
- shunt-resistor = <5000>;
- };
- ina226@45 { /* u86 */
- compatible = "ti,ina226";
- reg = <0x45>;
- shunt-resistor = <5000>;
- };
- ina226@46 { /* u93 */
- compatible = "ti,ina226";
- reg = <0x46>;
- shunt-resistor = <5000>;
- };
- ina226@47 { /* u88 */
- compatible = "ti,ina226";
- reg = <0x47>;
- shunt-resistor = <5000>;
- };
- ina226@4a { /* u15 */
- compatible = "ti,ina226";
- reg = <0x4a>;
- shunt-resistor = <5000>;
- };
- ina226@4b { /* u92 */
- compatible = "ti,ina226";
- reg = <0x4b>;
- shunt-resistor = <5000>;
- };
- };
- i2c@1 { /* i2c mw 75 0 1 */
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- /* PL_PMBUS */
- ina226@40 { /* u79 */
- compatible = "ti,ina226";
- reg = <0x40>;
- shunt-resistor = <2000>;
- };
- ina226@41 { /* u81 */
- compatible = "ti,ina226";
- reg = <0x41>;
- shunt-resistor = <5000>;
- };
- ina226@42 { /* u80 */
- compatible = "ti,ina226";
- reg = <0x42>;
- shunt-resistor = <5000>;
- };
- ina226@43 { /* u84 */
- compatible = "ti,ina226";
- reg = <0x43>;
- shunt-resistor = <5000>;
- };
- ina226@44 { /* u16 */
- compatible = "ti,ina226";
- reg = <0x44>;
- shunt-resistor = <5000>;
- };
- ina226@45 { /* u65 */
- compatible = "ti,ina226";
- reg = <0x45>;
- shunt-resistor = <5000>;
- };
- ina226@46 { /* u74 */
- compatible = "ti,ina226";
- reg = <0x46>;
- shunt-resistor = <5000>;
- };
- ina226@47 { /* u75 */
- compatible = "ti,ina226";
- reg = <0x47>;
- shunt-resistor = <5000>;
- };
- };
- i2c@2 { /* i2c mw 75 0 1 */
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- /* MAXIM_PMBUS - 00 */
- max15301@a { /* u46 */
- compatible = "max15301";
- reg = <0xa>;
- };
- max15303@b { /* u4 */
- compatible = "max15303";
- reg = <0xb>;
- };
- max15303@10 { /* u13 */
- compatible = "max15303";
- reg = <0x10>;
- };
- max15301@13 { /* u47 */
- compatible = "max15301";
- reg = <0x13>;
- };
- max15303@14 { /* u7 */
- compatible = "max15303";
- reg = <0x14>;
- };
- max15303@15 { /* u6 */
- compatible = "max15303";
- reg = <0x15>;
- };
- max15303@16 { /* u10 */
- compatible = "max15303";
- reg = <0x16>;
- };
- max15303@17 { /* u9 */
- compatible = "max15303";
- reg = <0x17>;
- };
- max15301@18 { /* u63 */
- compatible = "max15301";
- reg = <0x18>;
- };
- max15303@1a { /* u49 */
- compatible = "max15303";
- reg = <0x1a>;
- };
- max15303@1d { /* u18 */
- compatible = "max15303";
- reg = <0x1d>;
- };
- max15303@20 { /* u8 */
- compatible = "max15303";
- status = "disabled"; /* unreachable */
- reg = <0x20>;
- };
-
-/* drivers/hwmon/pmbus/Kconfig:86: be called max20751.
-drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751) += max20751.o
-*/
- max20751@72 { /* u95 FIXME - not detected */
- compatible = "max20751";
- reg = <0x72>;
- };
- max20751@73 { /* u96 FIXME - not detected */
- compatible = "max20751";
- reg = <0x73>;
- };
- };
- /* Bus 3 is not connected */
- };
-
- /* FIXME PMOD - j160 */
- /* FIXME MSP430F - u41 - not detected */
-};
-
-&i2c1 {
- status = "okay";
- clock-frequency = <400000>;
- /* FIXME PL i2c via PCA9306 - u45 */
- /* FIXME MSP430 - u41 - not detected */
- i2cswitch@74 { /* u34 */
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x74>;
- i2c@0 { /* i2c mw 74 0 1 */
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- /*
- * IIC_EEPROM 1kB memory which uses 256B blocks
- * where every block has different address.
- * 0 - 256B address 0x54
- * 256B - 512B address 0x55
- * 512B - 768B address 0x56
- * 768B - 1024B address 0x57
- */
- eeprom@54 { /* u23 */
- compatible = "at,24c08";
- reg = <0x54>;
- };
- };
- i2c@1 { /* i2c mw 74 0 2 */
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- si5341: clock-generator1@36 { /* SI5341 - u69 */
- compatible = "si5341";
- reg = <0x36>;
- };
-
- };
- i2c@2 { /* i2c mw 74 0 4 */
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- si570_1: clock-generator2@5d { /* USER SI570 - u42 */
- #clock-cells = <0>;
- compatible = "silabs,si570";
- reg = <0x5d>;
- temperature-stability = <50>;
- factory-fout = <300000000>;
- clock-frequency = <300000000>;
- };
- };
- i2c@3 { /* i2c mw 74 0 8 */
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- si570_2: clock-generator3@5d { /* USER MGT SI570 - u56 */
- #clock-cells = <0>;
- compatible = "silabs,si570";
- reg = <0x5d>;
- temperature-stability = <50>; /* copy from zc702 */
- factory-fout = <156250000>;
- clock-frequency = <148500000>;
- };
- };
- i2c@4 { /* i2c mw 74 0 10 */
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- si5328: clock-generator4@69 {/* SI5328 - u20 */
- compatible = "silabs,si5328";
- reg = <0x69>;
- };
- };
- /* 5 - 7 unconnected */
- };
-
- i2cswitch@75 {
- compatible = "nxp,pca9548"; /* u135 */
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x75>;
-
- i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- /* HPC0_IIC */
- };
- i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- /* HPC1_IIC */
- };
- i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- /* SYSMON */
- };
- i2c@3 { /* i2c mw 75 0 8 */
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- /* DDR4 SODIMM */
- dev@19 { /* u-boot detection */
- compatible = "xxx";
- reg = <0x19>;
- };
- dev@30 { /* u-boot detection */
- compatible = "xxx";
- reg = <0x30>;
- };
- dev@35 { /* u-boot detection */
- compatible = "xxx";
- reg = <0x35>;
- };
- dev@36 { /* u-boot detection */
- compatible = "xxx";
- reg = <0x36>;
- };
- dev@51 { /* u-boot detection - maybe SPD */
- compatible = "xxx";
- reg = <0x51>;
- };
- };
- i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- /* SEP 3 */
- };
- i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- /* SEP 2 */
- };
- i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- /* SEP 1 */
- };
- i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- /* SEP 0 */
- };
- };
-};
-
-&pcie {
-/* status = "okay"; */
-};
-
-&qspi {
- status = "okay";
- is-dual = <1>;
- flash@0 {
- compatible = "m25p80"; /* 32MB */
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x0>;
- spi-tx-bus-width = <1>;
- spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
- spi-max-frequency = <108000000>; /* Based on DC1 spec */
- partition@qspi-fsbl-uboot { /* for testing purpose */
- label = "qspi-fsbl-uboot";
- reg = <0x0 0x100000>;
- };
- partition@qspi-linux { /* for testing purpose */
- label = "qspi-linux";
- reg = <0x100000 0x500000>;
- };
- partition@qspi-device-tree { /* for testing purpose */
- label = "qspi-device-tree";
- reg = <0x600000 0x20000>;
- };
- partition@qspi-rootfs { /* for testing purpose */
- label = "qspi-rootfs";
- reg = <0x620000 0x5E0000>;
- };
- };
-};
-
-&rtc {
- status = "okay";
-};
-
-&sata {
- status = "okay";
- /* SATA OOB timing settings */
- ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
- ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
- ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
- ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
- ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
- ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
- ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
- ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
-};
-
-/* SD1 with level shifter */
-&sdhci1 {
- status = "okay";
- no-1-8-v; /* for 1.0 silicon */
- xlnx,mio_bank = <1>;
-};
-
-&uart0 {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-/* ULPI SMSC USB3320 */
-&usb0 {
- status = "okay";
-};
-
-&dwc3_0 {
- status = "okay";
- dr_mode = "host";
-};
-
-&xilinx_drm {
- status = "okay";
- clocks = <&si570_1>;
-};
-
-&xlnx_dp {
- status = "okay";
-};
-
-&xlnx_dp_sub {
- status = "okay";
- xlnx,vid-clk-pl;
-};
-
-&xlnx_dp_snd_pcm0 {
- status = "okay";
-};
-
-&xlnx_dp_snd_pcm1 {
- status = "okay";
-};
-
-&xlnx_dp_snd_card {
- status = "okay";
-};
-
-&xlnx_dp_snd_codec0 {
- status = "okay";
-};
-
-&xlnx_dpdma {
- status = "okay";
-};
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_zcu102"
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_IDENT_STRING=" Xilinx ZynqMP ZCU102"
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu102"
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-CONFIG_ENV_IS_IN_FAT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_SPL=y
-CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_PROMPT="ZynqMP> "
-# CONFIG_CMD_IMLS is not set
-CONFIG_CMD_EEPROM=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_UNZIP=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPT=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-# CONFIG_SPL_ISO_PARTITION is not set
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_EMBED=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_SATA_CEVA=y
-CONFIG_DFU_RAM=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_DM_ETH=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_XHCI_ZYNQMP=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GADGET=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Xilinx"
-CONFIG_G_DNL_VENDOR_NUM=0x03FD
-CONFIG_G_DNL_PRODUCT_NUM=0x0300
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_zcu102"
+CONFIG_ARCH_ZYNQMP=y
+CONFIG_SYS_TEXT_BASE=0x8000000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_IDENT_STRING=" Xilinx ZynqMP ZCU102"
+CONFIG_ZYNQMP_USB=y
+CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu102-revA"
+CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_ENV_IS_IN_FAT=y
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_PROMPT="ZynqMP> "
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_EEPROM=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_UNZIP=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_ISO_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_EMBED=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SCSI=y
+CONFIG_DM_SCSI=y
+CONFIG_SATA_CEVA=y
+CONFIG_DFU_RAM=y
+CONFIG_FPGA_XILINX=y
+CONFIG_FPGA_ZYNQMPPL=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ZYNQ=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_DM_ETH=y
+CONFIG_ZYNQ_GEM=y
+CONFIG_DEBUG_UART_ZYNQ=y
+CONFIG_DEBUG_UART_BASE=0xff000000
+CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_XHCI_ZYNQMP=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GADGET=y
+CONFIG_USB_ULPI_VIEWPORT=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="Xilinx"
+CONFIG_G_DNL_VENDOR_NUM=0x03FD
+CONFIG_G_DNL_PRODUCT_NUM=0x0300
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
projects / u-boot / commitdiff