]> git.sur5r.net Git - u-boot/commitdiff
spl: move SPL driver entries to driver/Makefile
authorMasahiro Yamada <yamada.masahiro@socionext.com>
Tue, 11 Aug 2015 22:31:44 +0000 (07:31 +0900)
committerTom Rini <trini@konsulko.com>
Tue, 18 Aug 2015 17:46:00 +0000 (13:46 -0400)
Just preparing for upcoming cleaning.

The board-specific linker script  board/vpac270/u-boot-spl.lds
has been touched to avoid build error.  It does not change the
size of spl/u-boot-spl.bin for this board, so it should be OK.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
board/vpac270/u-boot-spl.lds
drivers/Makefile
scripts/Makefile.spl

index a10ea71e9d52c1856d33c6209053e3653d09ce62..954afb9f8b7446383101f8033f442db05855c33b 100644 (file)
@@ -23,7 +23,7 @@ SECTIONS
                arch/arm/cpu/pxa/start.o                (.text*)
                arch/arm/lib/built-in.o                 (.text*)
                board/vpac270/built-in.o                (.text*)
-               drivers/mtd/onenand/built-in.o          (.text*)
+               drivers/built-in.o                      (.text*)
        }
 
 
index 5a35148ead10237b81e570cc68ddc8b078c66b6c..a24c5f5cce21d4e98c8e2a55e5e20056e8b1f22a 100644 (file)
@@ -1,3 +1,38 @@
+ifdef CONFIG_SPL_BUILD
+
+obj-$(CONFIG_SPL_CLK_SUPPORT) += clk/
+obj-$(CONFIG_SPL_DM) += core/
+obj-$(CONFIG_SPL_I2C_SUPPORT) += i2c/
+obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/
+obj-$(CONFIG_SPL_MMC_SUPPORT) += mmc/
+obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
+obj-$(CONFIG_SYS_MVEBU_DDR_A38X) += ddr/marvell/a38x/
+obj-$(CONFIG_SYS_MVEBU_DDR_AXP) += ddr/marvell/axp/
+obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
+obj-$(CONFIG_SPL_SERIAL_SUPPORT) += serial/
+obj-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += mtd/spi/
+obj-$(CONFIG_SPL_SPI_SUPPORT) += spi/
+obj-$(CONFIG_SPL_LED_SUPPORT) += led/
+obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
+obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
+obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/
+obj-$(CONFIG_SPL_NAND_SUPPORT) += mtd/nand/
+obj-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += misc/
+obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/
+obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/
+obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
+obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
+obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/
+obj-$(CONFIG_SPL_RAM_SUPPORT) += ram/
+obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
+obj-$(CONFIG_SPL_USBETH_SUPPORT) += usb/gadget/
+obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
+obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
+obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
+obj-$(CONFIG_SPL_SATA_SUPPORT) += block/
+
+else
+
 obj-$(CONFIG_CLK) += clk/
 obj-$(CONFIG_DM) += core/
 obj-$(CONFIG_DM_DEMO) += demo/
@@ -27,3 +62,5 @@ obj-y += input/
 # SOC specific infrastructure drivers.
 obj-y += soc/
 obj-y += thermal/
+
+endif
index 239ee48816634b450541383b032d218ae19b3c5b..58442f150d8cca3a864b68cd10c9c3758bfd2ef5 100644 (file)
@@ -54,40 +54,11 @@ libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
 libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
 libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/
 libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
-libs-$(CONFIG_SPL_CLK_SUPPORT) += drivers/clk/
-libs-$(CONFIG_SPL_DM) += drivers/core/
-libs-$(CONFIG_SPL_I2C_SUPPORT) += drivers/i2c/
-libs-$(CONFIG_SPL_GPIO_SUPPORT) += drivers/gpio/
-libs-$(CONFIG_SPL_MMC_SUPPORT) += drivers/mmc/
-libs-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += drivers/ddr/fsl/
-libs-$(CONFIG_SYS_MVEBU_DDR_A38X) += drivers/ddr/marvell/a38x/
-libs-$(CONFIG_SYS_MVEBU_DDR_AXP) += drivers/ddr/marvell/axp/
-libs-$(CONFIG_ALTERA_SDRAM) += drivers/ddr/altera/
-libs-$(CONFIG_SPL_SERIAL_SUPPORT) += drivers/serial/
-libs-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += drivers/mtd/spi/
-libs-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/
+libs-y += drivers/
 libs-y += fs/
-libs-$(CONFIG_SPL_LED_SUPPORT) += drivers/led/
 libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
-libs-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/ drivers/power/pmic/
-libs-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/regulator/
-libs-$(CONFIG_SPL_MTD_SUPPORT) += drivers/mtd/
-libs-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/
-libs-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += drivers/misc/
-libs-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/
-libs-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/
 libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/
 libs-$(CONFIG_SPL_NET_SUPPORT) += net/
-libs-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/
-libs-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/
-libs-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/net/phy/
-libs-$(CONFIG_SPL_RAM_SUPPORT) += drivers/ram/
-libs-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/
-libs-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/
-libs-$(CONFIG_SPL_WATCHDOG_SUPPORT) += drivers/watchdog/
-libs-$(CONFIG_SPL_USB_HOST_SUPPORT) += drivers/usb/host/
-libs-$(CONFIG_OMAP_USB_PHY) += drivers/usb/phy/
-libs-$(CONFIG_SPL_SATA_SUPPORT) += drivers/block/
 
 head-y         := $(addprefix $(obj)/,$(head-y))
 libs-y         := $(addprefix $(obj)/,$(libs-y))