]> git.sur5r.net Git - u-boot/commitdiff
serial: Drop the s3c24x0 serial driver
authorSimon Glass <sjg@chromium.org>
Wed, 23 Nov 2016 13:01:32 +0000 (06:01 -0700)
committerTom Rini <trini@konsulko.com>
Sun, 4 Dec 2016 18:55:00 +0000 (13:55 -0500)
This is not used by any boards. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: David Müller <d.mueller@elsoft.ch>
Reviewed-by: Jagan Teki <jagan@openedev.com>
doc/driver-model/serial-howto.txt
drivers/serial/Makefile
drivers/serial/serial_s3c24x0.c [deleted file]
scripts/config_whitelist.txt

index 3720274160c831cf79297246580e1bd905d051c8..a0df9a7ec28fe757de117d7f6c8ab76196888458 100644 (file)
@@ -6,7 +6,6 @@ ones remain:
 
    serial_bfin.c
    serial_pxa.c
-   serial_s3c24x0.c
 
 The deadline for this work was the end of January 2016. If no one steps
 forward to convert these, at some point there may come a patch to remove them!
index 21b129206adc0f51b2a11259ca1f7399a6eabc1b..8430668bf98299eb88a373eb21f423e5f9a103b5 100644 (file)
@@ -31,7 +31,6 @@ obj-$(CONFIG_MESON_SERIAL) += serial_meson.o
 ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_ROCKCHIP_SERIAL) += serial_rockchip.o
 endif
-obj-$(CONFIG_S3C24X0_SERIAL) += serial_s3c24x0.o
 obj-$(CONFIG_XILINX_UARTLITE) += serial_xuartlite.o
 obj-$(CONFIG_SANDBOX_SERIAL) += sandbox.o
 obj-$(CONFIG_SCIF_CONSOLE) += serial_sh.o
diff --git a/drivers/serial/serial_s3c24x0.c b/drivers/serial/serial_s3c24x0.c
deleted file mode 100644 (file)
index 0f0878a..0000000
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/compiler.h>
-#include <asm/arch/s3c24x0_cpu.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_SERIAL1
-#define UART_NR        S3C24X0_UART0
-
-#elif defined(CONFIG_SERIAL2)
-#define UART_NR        S3C24X0_UART1
-
-#elif defined(CONFIG_SERIAL3)
-#define UART_NR        S3C24X0_UART2
-
-#else
-#error "Bad: you didn't configure serial ..."
-#endif
-
-#include <asm/io.h>
-#include <serial.h>
-
-/* Multi serial device functions */
-#define DECLARE_S3C_SERIAL_FUNCTIONS(port) \
-       int s3serial##port##_init(void) \
-       { \
-               return serial_init_dev(port); \
-       } \
-       void s3serial##port##_setbrg(void) \
-       { \
-               serial_setbrg_dev(port); \
-       } \
-       int s3serial##port##_getc(void) \
-       { \
-               return serial_getc_dev(port); \
-       } \
-       int s3serial##port##_tstc(void) \
-       { \
-               return serial_tstc_dev(port); \
-       } \
-       void s3serial##port##_putc(const char c) \
-       { \
-               serial_putc_dev(port, c); \
-       } \
-       void s3serial##port##_puts(const char *s) \
-       { \
-               serial_puts_dev(port, s); \
-       }
-
-#define INIT_S3C_SERIAL_STRUCTURE(port, __name) {      \
-       .name   = __name,                               \
-       .start  = s3serial##port##_init,                \
-       .stop   = NULL,                                 \
-       .setbrg = s3serial##port##_setbrg,              \
-       .getc   = s3serial##port##_getc,                \
-       .tstc   = s3serial##port##_tstc,                \
-       .putc   = s3serial##port##_putc,                \
-       .puts   = s3serial##port##_puts,                \
-}
-
-static void _serial_setbrg(const int dev_index)
-{
-       struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index);
-       unsigned int reg = 0;
-       int i;
-
-       /* value is calculated so : (int)(PCLK/16./baudrate) -1 */
-       reg = get_PCLK() / (16 * gd->baudrate) - 1;
-
-       writel(reg, &uart->ubrdiv);
-       for (i = 0; i < 100; i++)
-               /* Delay */ ;
-}
-
-static inline void serial_setbrg_dev(unsigned int dev_index)
-{
-       _serial_setbrg(dev_index);
-}
-
-/* Initialise the serial port. The settings are always 8 data bits, no parity,
- * 1 stop bit, no start bits.
- */
-static int serial_init_dev(const int dev_index)
-{
-       struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index);
-
-       /* FIFO enable, Tx/Rx FIFO clear */
-       writel(0x07, &uart->ufcon);
-       writel(0x0, &uart->umcon);
-
-       /* Normal,No parity,1 stop,8 bit */
-       writel(0x3, &uart->ulcon);
-       /*
-        * tx=level,rx=edge,disable timeout int.,enable rx error int.,
-        * normal,interrupt or polling
-        */
-       writel(0x245, &uart->ucon);
-
-       _serial_setbrg(dev_index);
-
-       return (0);
-}
-
-/*
- * Read a single byte from the serial port. Returns 1 on success, 0
- * otherwise. When the function is succesfull, the character read is
- * written into its argument c.
- */
-static int _serial_getc(const int dev_index)
-{
-       struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index);
-
-       while (!(readl(&uart->utrstat) & 0x1))
-               /* wait for character to arrive */ ;
-
-       return readb(&uart->urxh) & 0xff;
-}
-
-static inline int serial_getc_dev(unsigned int dev_index)
-{
-       return _serial_getc(dev_index);
-}
-
-/*
- * Output a single byte to the serial port.
- */
-static void _serial_putc(const char c, const int dev_index)
-{
-       struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index);
-
-       /* If \n, also do \r */
-       if (c == '\n')
-               serial_putc('\r');
-
-       while (!(readl(&uart->utrstat) & 0x2))
-               /* wait for room in the tx FIFO */ ;
-
-       writeb(c, &uart->utxh);
-}
-
-static inline void serial_putc_dev(unsigned int dev_index, const char c)
-{
-       _serial_putc(c, dev_index);
-}
-
-/*
- * Test whether a character is in the RX buffer
- */
-static int _serial_tstc(const int dev_index)
-{
-       struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index);
-
-       return readl(&uart->utrstat) & 0x1;
-}
-
-static inline int serial_tstc_dev(unsigned int dev_index)
-{
-       return _serial_tstc(dev_index);
-}
-
-static void _serial_puts(const char *s, const int dev_index)
-{
-       while (*s) {
-               _serial_putc(*s++, dev_index);
-       }
-}
-
-static inline void serial_puts_dev(int dev_index, const char *s)
-{
-       _serial_puts(s, dev_index);
-}
-
-DECLARE_S3C_SERIAL_FUNCTIONS(0);
-struct serial_device s3c24xx_serial0_device =
-INIT_S3C_SERIAL_STRUCTURE(0, "s3ser0");
-DECLARE_S3C_SERIAL_FUNCTIONS(1);
-struct serial_device s3c24xx_serial1_device =
-INIT_S3C_SERIAL_STRUCTURE(1, "s3ser1");
-DECLARE_S3C_SERIAL_FUNCTIONS(2);
-struct serial_device s3c24xx_serial2_device =
-INIT_S3C_SERIAL_STRUCTURE(2, "s3ser2");
-
-__weak struct serial_device *default_serial_console(void)
-{
-#if defined(CONFIG_SERIAL1)
-       return &s3c24xx_serial0_device;
-#elif defined(CONFIG_SERIAL2)
-       return &s3c24xx_serial1_device;
-#elif defined(CONFIG_SERIAL3)
-       return &s3c24xx_serial2_device;
-#else
-#error "CONFIG_SERIAL? missing."
-#endif
-}
-
-void s3c24xx_serial_initialize(void)
-{
-       serial_register(&s3c24xx_serial0_device);
-       serial_register(&s3c24xx_serial1_device);
-       serial_register(&s3c24xx_serial2_device);
-}
index 9cabd99e6714a5fc13d7a60c5c35b3987a5002cf..121b4f2f9fb404cc67b9ca5d06a83c8fdf939ba1 100644 (file)
@@ -3805,7 +3805,6 @@ CONFIG_S3C2410_NAND_BBT
 CONFIG_S3C2410_NAND_HWECC
 CONFIG_S3C2440
 CONFIG_S3C24X0
-CONFIG_S3C24X0_SERIAL
 CONFIG_S3C24XX_CUSTOM_NAND_TIMING
 CONFIG_S3C24XX_TACLS
 CONFIG_S3C24XX_TWRPH0