]> git.sur5r.net Git - u-boot/commitdiff
Das U-Boot: Universal Boot Loader
authorwdenk <wdenk>
Sat, 26 Oct 2002 16:43:06 +0000 (16:43 +0000)
committerwdenk <wdenk>
Sat, 26 Oct 2002 16:43:06 +0000 (16:43 +0000)
board/cradle/flash.c [new file with mode: 0644]
board/dnp1110/flash.c [new file with mode: 0644]
board/lart/flash.c [new file with mode: 0644]
board/lubbock/flash.c [new file with mode: 0644]
board/shannon/flash.c [new file with mode: 0644]
board/smdk2400/flash.c [new file with mode: 0644]
board/smdk2410/flash.c [new file with mode: 0644]

diff --git a/board/cradle/flash.c b/board/cradle/flash.c
new file mode 100644 (file)
index 0000000..265b609
--- /dev/null
@@ -0,0 +1,367 @@
+/*
+ * (C) Copyright 2002
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#define FLASH_BANK_SIZE 0x400000
+#define MAIN_SECT_SIZE  0x20000
+
+flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+
+
+/*-----------------------------------------------------------------------
+ */
+
+ulong flash_init(void)
+{
+   int i, j;
+   ulong size = 0;
+
+   for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
+   {
+      ulong flashbase = 0;
+      flash_info[i].flash_id =
+          (INTEL_MANUFACT & FLASH_VENDMASK) |
+          (INTEL_ID_28F128J3 & FLASH_TYPEMASK);
+      flash_info[i].size = FLASH_BANK_SIZE;
+      flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+      memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+      switch (i)
+      {
+         case 0:
+                flashbase = PHYS_FLASH_1;
+                break;
+         case 1:
+                flashbase = PHYS_FLASH_2;
+                break;
+         default:
+                panic("configured to many flash banks!\n");
+                break;
+      }
+      for (j = 0; j < flash_info[i].sector_count; j++)
+      {
+         flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE;
+      }
+      size += flash_info[i].size;
+   }
+
+   /* Protect monitor and environment sectors
+    */
+   flash_protect(FLAG_PROTECT_SET,
+                  CFG_FLASH_BASE,
+                  CFG_FLASH_BASE + _armboot_end_data - _armboot_start,
+                  &flash_info[0]);
+
+   flash_protect(FLAG_PROTECT_SET,
+                  CFG_ENV_ADDR,
+                  CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+                  &flash_info[0]);
+
+   return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+   int i, j;
+
+   for (j=0; j<CFG_MAX_FLASH_BANKS; j++)
+   {
+      switch (info->flash_id & FLASH_VENDMASK)
+      {
+         case (INTEL_MANUFACT & FLASH_VENDMASK):
+                printf("Intel: ");
+                break;
+         default:
+                printf("Unknown Vendor ");
+                break;
+      }
+
+      switch (info->flash_id & FLASH_TYPEMASK)
+      {
+         case (INTEL_ID_28F320J3A & FLASH_TYPEMASK):
+                printf("28F320J3A (32Mbit)\n");
+                break;
+         case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
+                printf("28F128J3 (128Mbit)\n");
+                break;
+         default:
+                printf("Unknown Chip Type\n");
+                goto Done;
+                break;
+      }
+
+      printf("  Size: %ld MB in %d Sectors\n",
+                info->size >> 20, info->sector_count);
+
+      printf("  Sector Start Addresses:");
+      for (i = 0; i < info->sector_count; i++)
+      {
+         if ((i % 5) == 0)
+         {
+            printf ("\n   ");
+         }
+         printf (" %08lX%s", info->start[i],
+                        info->protect[i] ? " (RO)" : "     ");
+      }
+      printf ("\n");
+      info++;
+   }
+
+Done:
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int        flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+   int flag, prot, sect;
+   int rc = ERR_OK;
+
+   if (info->flash_id == FLASH_UNKNOWN)
+        return ERR_UNKNOWN_FLASH_TYPE;
+
+   if ((s_first < 0) || (s_first > s_last)) {
+        return ERR_INVAL;
+   }
+
+   if ((info->flash_id & FLASH_VENDMASK) !=
+        (INTEL_MANUFACT & FLASH_VENDMASK)) {
+        return ERR_UNKNOWN_FLASH_VENDOR;
+   }
+
+   prot = 0;
+   for (sect=s_first; sect<=s_last; ++sect) {
+      if (info->protect[sect]) {
+            prot++;
+      }
+   }
+   if (prot)
+        return ERR_PROTECTED;
+
+   /*
+    * Disable interrupts which might cause a timeout
+    * here. Remember that our exception vectors are
+    * at address 0 in the flash, and we don't want a
+    * (ticker) exception to happen while the flash
+    * chip is in programming mode.
+    */
+   flag = disable_interrupts();
+
+   /* Start erase on unprotected sectors */
+   for (sect = s_first; sect<=s_last && !ctrlc(); sect++) {
+
+      printf("Erasing sector %2d ... ", sect);
+
+      /* arm simple, non interrupt dependent timer */
+      reset_timer_masked();
+
+      if (info->protect[sect] == 0) {        /* not protected */
+          vu_short *addr = (vu_short *)(info->start[sect]);
+
+          *addr = 0x20;        /* erase setup */
+          *addr = 0xD0;        /* erase confirm */
+
+          while ((*addr & 0x80) != 0x80) {
+             if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
+                *addr = 0xB0; /* suspend erase */
+                *addr = 0xFF;        /* reset to read mode */
+                rc = ERR_TIMOUT;
+                goto outahere;
+             }
+          }
+
+          /* clear status register command */
+          *addr = 0x50;
+          /* reset to read mode */
+          *addr = 0xFF;
+      }
+      printf("ok.\n");
+   }
+   if (ctrlc())
+      printf("User Interrupt!\n");
+
+outahere:
+
+   /* allow flash to settle - wait 10 ms */
+   udelay_masked(10000);
+
+   if (flag)
+      enable_interrupts();
+
+   return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash
+ */
+
+static int write_word (flash_info_t *info, ulong dest, ushort data)
+{
+   vu_short *addr = (vu_short *)dest, val;
+   int rc = ERR_OK;
+   int flag;
+
+   /* Check if Flash is (sufficiently) erased
+    */
+   if ((*addr & data) != data)
+      return ERR_NOT_ERASED;
+
+   /*
+    * Disable interrupts which might cause a timeout
+    * here. Remember that our exception vectors are
+    * at address 0 in the flash, and we don't want a
+    * (ticker) exception to happen while the flash
+    * chip is in programming mode.
+    */
+   flag = disable_interrupts();
+
+   /* clear status register command */
+   *addr = 0x50;
+
+   /* program set-up command */
+   *addr = 0x40;
+
+   /* latch address/data */
+   *addr = data;
+
+   /* arm simple, non interrupt dependent timer */
+   reset_timer_masked();
+
+   /* wait while polling the status register */
+   while(((val = *addr) & 0x80) != 0x80)
+   {
+      if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
+          rc = ERR_TIMOUT;
+          /* suspend program command */
+          *addr = 0xB0;
+          goto outahere;
+      }
+   }
+
+   if(val & 0x1A) {        /* check for error */
+      printf("\nFlash write error %02x at address %08lx\n",
+               (int)val, (unsigned long)dest);
+      if(val & (1<<3)) {
+         printf("Voltage range error.\n");
+         rc = ERR_PROG_ERROR;
+         goto outahere;
+      }
+      if(val & (1<<1)) {
+         printf("Device protect error.\n");
+         rc = ERR_PROTECTED;
+         goto outahere;
+      }
+      if(val & (1<<4)) {
+         printf("Programming error.\n");
+         rc = ERR_PROG_ERROR;
+         goto outahere;
+      }
+      rc = ERR_PROG_ERROR;
+      goto outahere;
+   }
+
+outahere:
+   /* read array command */
+   *addr = 0xFF;
+
+   if (flag)
+      enable_interrupts();
+
+   return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash.
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+   ulong cp, wp;
+   ushort data;
+   int l;
+   int i, rc;
+
+   wp = (addr & ~1);        /* get lower word aligned address */
+
+   /*
+    * handle unaligned start bytes
+    */
+   if ((l = addr - wp) != 0)
+   {
+      data = 0;
+      for (i=0, cp=wp; i<l; ++i, ++cp) {
+           data = (data >> 8) | (*(uchar *)cp << 8);
+      }
+      for (; i<2 && cnt>0; ++i) {
+         data = (data >> 8) | (*src++ << 8);
+         --cnt;
+         ++cp;
+      }
+      for (; cnt==0 && i<2; ++i, ++cp) {
+         data = (data >> 8) | (*(uchar *)cp << 8);
+      }
+
+      if ((rc = write_word(info, wp, data)) != 0) {
+         return (rc);
+      }
+      wp += 2;
+   }
+
+   /*
+    * handle word aligned part
+    */
+   while (cnt >= 2) {
+      data = *((vu_short*)src);
+      if ((rc = write_word(info, wp, data)) != 0) {
+          return (rc);
+      }
+      src += 2;
+      wp  += 2;
+      cnt -= 2;
+   }
+
+   if (cnt == 0) {
+      return ERR_OK;
+   }
+
+   /*
+    * handle unaligned tail bytes
+    */
+   data = 0;
+   for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
+      data = (data >> 8) | (*src++ << 8);
+      --cnt;
+   }
+   for (; i<2; ++i, ++cp) {
+      data = (data >> 8) | (*(uchar *)cp << 8);
+   }
+
+   return write_word(info, wp, data);
+}
diff --git a/board/dnp1110/flash.c b/board/dnp1110/flash.c
new file mode 100644 (file)
index 0000000..ca9aff9
--- /dev/null
@@ -0,0 +1,473 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Rolf Offermanns <rof@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+ulong myflush(void);
+
+
+#define FLASH_BANK_SIZE 0x800000
+#define MAIN_SECT_SIZE  0x20000
+#define PARAM_SECT_SIZE 0x4000
+
+/* puzzle magic for lart
+ * data_*_flash are def'd in flashasm.S
+ */
+
+extern u32 data_from_flash(u32);
+extern u32 data_to_flash(u32);
+
+#define PUZZLE_FROM_FLASH(x)   (x)
+#define PUZZLE_TO_FLASH(x)     (x)
+
+flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+
+
+#define CMD_READ_ARRAY         0x00FF00FF
+#define CMD_IDENTIFY           0x00900090
+#define CMD_ERASE_SETUP                0x00200020
+#define CMD_ERASE_CONFIRM      0x00D000D0
+#define CMD_PROGRAM            0x00400040
+#define CMD_RESUME             0x00D000D0
+#define CMD_SUSPEND            0x00B000B0
+#define CMD_STATUS_READ                0x00700070
+#define CMD_STATUS_RESET       0x00500050
+
+#define BIT_BUSY               0x00800080
+#define BIT_ERASE_SUSPEND      0x00400040
+#define BIT_ERASE_ERROR                0x00200020
+#define BIT_PROGRAM_ERROR      0x00100010
+#define BIT_VPP_RANGE_ERROR    0x00080008
+#define BIT_PROGRAM_SUSPEND    0x00040004
+#define BIT_PROTECT_ERROR      0x00020002
+#define BIT_UNDEFINED          0x00010001
+
+#define BIT_SEQUENCE_ERROR     0x00300030
+#define BIT_TIMEOUT            0x80000000
+
+/*-----------------------------------------------------------------------
+ */
+
+ulong flash_init(void)
+{
+    int i, j;
+    ulong size = 0;
+
+    for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
+    {
+       ulong flashbase = 0;
+       flash_info[i].flash_id =
+         (INTEL_MANUFACT & FLASH_VENDMASK) |
+         (INTEL_ID_28F160F3B & FLASH_TYPEMASK);
+       flash_info[i].size = FLASH_BANK_SIZE;
+       flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+       memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+       if (i == 0)
+         flashbase = PHYS_FLASH_1;
+       else
+         panic("configured to many flash banks!\n");
+       for (j = 0; j < flash_info[i].sector_count; j++)
+       {
+           if (j <= 7)
+           {
+               flash_info[i].start[j] = flashbase + j * PARAM_SECT_SIZE;
+           }
+           else
+           {
+               flash_info[i].start[j] = flashbase + (j - 7)*MAIN_SECT_SIZE;
+           }
+       }
+       size += flash_info[i].size;
+    }
+
+    /* Protect monitor and environment sectors
+     */
+    flash_protect(FLAG_PROTECT_SET,
+                 CFG_FLASH_BASE,
+                 CFG_FLASH_BASE + _armboot_end_data - _armboot_start,
+                 &flash_info[0]);
+
+    flash_protect(FLAG_PROTECT_SET,
+                 CFG_ENV_ADDR,
+                 CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+                 &flash_info[0]);
+
+    return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+    int i;
+
+    switch (info->flash_id & FLASH_VENDMASK)
+    {
+    case (INTEL_MANUFACT & FLASH_VENDMASK):
+       printf("Intel: ");
+       break;
+    default:
+       printf("Unknown Vendor ");
+       break;
+    }
+
+    switch (info->flash_id & FLASH_TYPEMASK)
+    {
+    case (INTEL_ID_28F160F3B & FLASH_TYPEMASK):
+       printf("2x 28F160F3B (16Mbit)\n");
+       break;
+    default:
+       printf("Unknown Chip Type\n");
+       goto Done;
+       break;
+    }
+
+    printf("  Size: %ld MB in %d Sectors\n",
+          info->size >> 20, info->sector_count);
+
+    printf("  Sector Start Addresses:");
+    for (i = 0; i < info->sector_count; i++)
+    {
+       if ((i % 5) == 0)
+       {
+           printf ("\n   ");
+       }
+       printf (" %08lX%s", info->start[i],
+               info->protect[i] ? " (RO)" : "     ");
+    }
+    printf ("\n");
+
+Done:
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_error (ulong code)
+{
+       /* Check bit patterns */
+       /* SR.7=0 is busy, SR.7=1 is ready */
+       /* all other flags indicate error on 1 */
+       /* SR.0 is undefined */
+       /* Timeout is our faked flag */
+
+       /* sequence is described in Intel 290644-005 document */
+
+       /* check Timeout */
+       if (code & BIT_TIMEOUT)
+       {
+               printf ("Timeout\n");
+               return ERR_TIMOUT;
+       }
+
+       /* check Busy, SR.7 */
+       if (~code & BIT_BUSY)
+       {
+               printf ("Busy\n");
+               return ERR_PROG_ERROR;
+       }
+
+       /* check Vpp low, SR.3 */
+       if (code & BIT_VPP_RANGE_ERROR)
+       {
+               printf ("Vpp range error\n");
+               return ERR_PROG_ERROR;
+       }
+
+       /* check Device Protect Error, SR.1 */
+       if (code & BIT_PROTECT_ERROR)
+       {
+               printf ("Device protect error\n");
+               return ERR_PROG_ERROR;
+       }
+
+       /* check Command Seq Error, SR.4 & SR.5 */
+       if (code & BIT_SEQUENCE_ERROR)
+       {
+               printf ("Command seqence error\n");
+               return ERR_PROG_ERROR;
+       }
+
+       /* check Block Erase Error, SR.5 */
+       if (code & BIT_ERASE_ERROR)
+       {
+               printf ("Block erase error\n");
+               return ERR_PROG_ERROR;
+       }
+
+       /* check Program Error, SR.4 */
+       if (code & BIT_PROGRAM_ERROR)
+       {
+               printf ("Program error\n");
+               return ERR_PROG_ERROR;
+       }
+
+       /* check Block Erase Suspended, SR.6 */
+       if (code & BIT_ERASE_SUSPEND)
+       {
+               printf ("Block erase suspended\n");
+               return ERR_PROG_ERROR;
+       }
+
+       /* check Program Suspended, SR.2 */
+       if (code & BIT_PROGRAM_SUSPEND)
+       {
+               printf ("Program suspended\n");
+               return ERR_PROG_ERROR;
+       }
+
+       /* OK, no error */
+       return ERR_OK;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int    flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+    ulong result;
+    int iflag, cflag, prot, sect;
+    int rc = ERR_OK;
+
+    /* first look for protection bits */
+
+    if (info->flash_id == FLASH_UNKNOWN)
+       return ERR_UNKNOWN_FLASH_TYPE;
+
+    if ((s_first < 0) || (s_first > s_last)) {
+       return ERR_INVAL;
+    }
+
+    if ((info->flash_id & FLASH_VENDMASK) !=
+       (INTEL_MANUFACT & FLASH_VENDMASK)) {
+       return ERR_UNKNOWN_FLASH_VENDOR;
+    }
+
+    prot = 0;
+    for (sect=s_first; sect<=s_last; ++sect) {
+       if (info->protect[sect]) {
+           prot++;
+       }
+    }
+    if (prot)
+       return ERR_PROTECTED;
+
+    /*
+     * Disable interrupts which might cause a timeout
+     * here. Remember that our exception vectors are
+     * at address 0 in the flash, and we don't want a
+     * (ticker) exception to happen while the flash
+     * chip is in programming mode.
+     */
+    cflag = icache_status();
+    icache_disable();
+    iflag = disable_interrupts();
+
+    /* Start erase on unprotected sectors */
+    for (sect = s_first; sect<=s_last && !ctrlc(); sect++)
+    {
+       printf("Erasing sector %2d ... ", sect);
+
+       /* arm simple, non interrupt dependent timer */
+       reset_timer_masked();
+
+       if (info->protect[sect] == 0)
+       {       /* not protected */
+           vu_long *addr = (vu_long *)(info->start[sect]);
+
+           *addr = PUZZLE_TO_FLASH(CMD_STATUS_RESET);
+           *addr = PUZZLE_TO_FLASH(CMD_ERASE_SETUP);
+           *addr = PUZZLE_TO_FLASH(CMD_ERASE_CONFIRM);
+
+           /* wait until flash is ready */
+           do
+           {
+               /* check timeout */
+               if (get_timer_masked() > CFG_FLASH_ERASE_TOUT)
+               {
+                   *addr = PUZZLE_TO_FLASH(CMD_SUSPEND);
+                   result = BIT_TIMEOUT;
+                   break;
+               }
+
+               result = PUZZLE_FROM_FLASH(*addr);
+           }  while (~result & BIT_BUSY);
+
+           *addr = PUZZLE_TO_FLASH(CMD_READ_ARRAY);
+
+           if ((rc = flash_error(result)) != ERR_OK)
+               goto outahere;
+
+           printf("ok.\n");
+       }
+       else /* it was protected */
+       {
+           printf("protected!\n");
+       }
+    }
+
+    if (ctrlc())
+      printf("User Interrupt!\n");
+
+outahere:
+    /* allow flash to settle - wait 10 ms */
+    udelay_masked(10000);
+
+    if (iflag)
+      enable_interrupts();
+
+    if (cflag)
+      icache_enable();
+
+    return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash
+ */
+
+volatile static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+    vu_long *addr = (vu_long *)dest;
+    ulong result;
+    int rc = ERR_OK;
+    int cflag, iflag;
+
+    /* Check if Flash is (sufficiently) erased
+     */
+    result = PUZZLE_FROM_FLASH(*addr);
+    if ((result & data) != data)
+        return ERR_NOT_ERASED;
+
+    /*
+     * Disable interrupts which might cause a timeout
+     * here. Remember that our exception vectors are
+     * at address 0 in the flash, and we don't want a
+     * (ticker) exception to happen while the flash
+     * chip is in programming mode.
+     */
+    cflag = icache_status();
+    icache_disable();
+    iflag = disable_interrupts();
+
+    *addr = PUZZLE_TO_FLASH(CMD_STATUS_RESET);
+    *addr = PUZZLE_TO_FLASH(CMD_PROGRAM);
+    *addr = data;
+
+    /* arm simple, non interrupt dependent timer */
+    reset_timer_masked();
+
+    /* wait until flash is ready */
+    do
+    {
+       /* check timeout */
+       if (get_timer_masked() > CFG_FLASH_ERASE_TOUT)
+       {
+           *addr = PUZZLE_TO_FLASH(CMD_SUSPEND);
+           result = BIT_TIMEOUT;
+           break;
+       }
+
+       result = PUZZLE_FROM_FLASH(*addr);
+    }  while (~result & BIT_BUSY);
+
+    *addr = PUZZLE_TO_FLASH(CMD_READ_ARRAY);
+
+    rc = flash_error(result);
+
+    if (iflag)
+      enable_interrupts();
+
+    if (cflag)
+      icache_enable();
+
+    return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash.
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+    ulong cp, wp, data;
+    int l;
+    int i, rc;
+
+    wp = (addr & ~3);  /* get lower word aligned address */
+
+    /*
+     * handle unaligned start bytes
+     */
+    if ((l = addr - wp) != 0) {
+       data = 0;
+       for (i=0, cp=wp; i<l; ++i, ++cp) {
+           data = (data >> 8) | (*(uchar *)cp << 24);
+       }
+       for (; i<4 && cnt>0; ++i) {
+           data = (data >> 8) | (*src++ << 24);
+           --cnt;
+           ++cp;
+       }
+       for (; cnt==0 && i<4; ++i, ++cp) {
+           data = (data >> 8) | (*(uchar *)cp << 24);
+       }
+
+       if ((rc = write_word(info, wp, data)) != 0) {
+           return (rc);
+       }
+       wp += 4;
+    }
+
+    /*
+     * handle word aligned part
+     */
+    while (cnt >= 4) {
+       data = *((vu_long*)src);
+       if ((rc = write_word(info, wp, data)) != 0) {
+           return (rc);
+       }
+       src += 4;
+       wp  += 4;
+       cnt -= 4;
+    }
+
+    if (cnt == 0) {
+       return ERR_OK;
+    }
+
+    /*
+     * handle unaligned tail bytes
+     */
+    data = 0;
+    for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+       data = (data >> 8) | (*src++ << 24);
+       --cnt;
+    }
+    for (; i<4; ++i, ++cp) {
+       data = (data >> 8) | (*(uchar *)cp << 24);
+    }
+
+    return write_word(info, wp, data);
+}
diff --git a/board/lart/flash.c b/board/lart/flash.c
new file mode 100644 (file)
index 0000000..7b19524
--- /dev/null
@@ -0,0 +1,473 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+ulong myflush(void);
+
+
+#define FLASH_BANK_SIZE 0x800000
+#define MAIN_SECT_SIZE  0x20000
+#define PARAM_SECT_SIZE 0x4000
+
+/* puzzle magic for lart
+ * data_*_flash are def'd in flashasm.S
+ */
+
+extern u32 data_from_flash(u32);
+extern u32 data_to_flash(u32);
+
+#define PUZZLE_FROM_FLASH(x)   data_from_flash((x))
+#define PUZZLE_TO_FLASH(x)     data_to_flash((x))
+
+flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+
+
+#define CMD_READ_ARRAY         0x00FF00FF
+#define CMD_IDENTIFY           0x00900090
+#define CMD_ERASE_SETUP                0x00200020
+#define CMD_ERASE_CONFIRM      0x00D000D0
+#define CMD_PROGRAM            0x00400040
+#define CMD_RESUME             0x00D000D0
+#define CMD_SUSPEND            0x00B000B0
+#define CMD_STATUS_READ                0x00700070
+#define CMD_STATUS_RESET       0x00500050
+
+#define BIT_BUSY               0x00800080
+#define BIT_ERASE_SUSPEND      0x00400040
+#define BIT_ERASE_ERROR                0x00200020
+#define BIT_PROGRAM_ERROR      0x00100010
+#define BIT_VPP_RANGE_ERROR    0x00080008
+#define BIT_PROGRAM_SUSPEND    0x00040004
+#define BIT_PROTECT_ERROR      0x00020002
+#define BIT_UNDEFINED          0x00010001
+
+#define BIT_SEQUENCE_ERROR     0x00300030
+#define BIT_TIMEOUT            0x80000000
+
+/*-----------------------------------------------------------------------
+ */
+
+ulong flash_init(void)
+{
+    int i, j;
+    ulong size = 0;
+
+    for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
+    {
+       ulong flashbase = 0;
+       flash_info[i].flash_id =
+         (INTEL_MANUFACT & FLASH_VENDMASK) |
+         (INTEL_ID_28F160F3B & FLASH_TYPEMASK);
+       flash_info[i].size = FLASH_BANK_SIZE;
+       flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+       memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+       if (i == 0)
+         flashbase = PHYS_FLASH_1;
+       else
+         panic("configured to many flash banks!\n");
+       for (j = 0; j < flash_info[i].sector_count; j++)
+       {
+           if (j <= 7)
+           {
+               flash_info[i].start[j] = flashbase + j * PARAM_SECT_SIZE;
+           }
+           else
+           {
+               flash_info[i].start[j] = flashbase + (j - 7)*MAIN_SECT_SIZE;
+           }
+       }
+       size += flash_info[i].size;
+    }
+
+    /* Protect monitor and environment sectors
+     */
+    flash_protect(FLAG_PROTECT_SET,
+                 CFG_FLASH_BASE,
+                 CFG_FLASH_BASE + _armboot_end_data - _armboot_start,
+                 &flash_info[0]);
+
+    flash_protect(FLAG_PROTECT_SET,
+                 CFG_ENV_ADDR,
+                 CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+                 &flash_info[0]);
+
+    return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+    int i;
+
+    switch (info->flash_id & FLASH_VENDMASK)
+    {
+    case (INTEL_MANUFACT & FLASH_VENDMASK):
+       printf("Intel: ");
+       break;
+    default:
+       printf("Unknown Vendor ");
+       break;
+    }
+
+    switch (info->flash_id & FLASH_TYPEMASK)
+    {
+    case (INTEL_ID_28F160F3B & FLASH_TYPEMASK):
+       printf("2x 28F160F3B (16Mbit)\n");
+       break;
+    default:
+       printf("Unknown Chip Type\n");
+       goto Done;
+       break;
+    }
+
+    printf("  Size: %ld MB in %d Sectors\n",
+          info->size >> 20, info->sector_count);
+
+    printf("  Sector Start Addresses:");
+    for (i = 0; i < info->sector_count; i++)
+    {
+       if ((i % 5) == 0)
+       {
+           printf ("\n   ");
+       }
+       printf (" %08lX%s", info->start[i],
+               info->protect[i] ? " (RO)" : "     ");
+    }
+    printf ("\n");
+
+Done:
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_error (ulong code)
+{
+       /* Check bit patterns */
+       /* SR.7=0 is busy, SR.7=1 is ready */
+       /* all other flags indicate error on 1 */
+       /* SR.0 is undefined */
+       /* Timeout is our faked flag */
+
+       /* sequence is described in Intel 290644-005 document */
+
+       /* check Timeout */
+       if (code & BIT_TIMEOUT)
+       {
+               printf ("Timeout\n");
+               return ERR_TIMOUT;
+       }
+
+       /* check Busy, SR.7 */
+       if (~code & BIT_BUSY)
+       {
+               printf ("Busy\n");
+               return ERR_PROG_ERROR;
+       }
+
+       /* check Vpp low, SR.3 */
+       if (code & BIT_VPP_RANGE_ERROR)
+       {
+               printf ("Vpp range error\n");
+               return ERR_PROG_ERROR;
+       }
+
+       /* check Device Protect Error, SR.1 */
+       if (code & BIT_PROTECT_ERROR)
+       {
+               printf ("Device protect error\n");
+               return ERR_PROG_ERROR;
+       }
+
+       /* check Command Seq Error, SR.4 & SR.5 */
+       if (code & BIT_SEQUENCE_ERROR)
+       {
+               printf ("Command seqence error\n");
+               return ERR_PROG_ERROR;
+       }
+
+       /* check Block Erase Error, SR.5 */
+       if (code & BIT_ERASE_ERROR)
+       {
+               printf ("Block erase error\n");
+               return ERR_PROG_ERROR;
+       }
+
+       /* check Program Error, SR.4 */
+       if (code & BIT_PROGRAM_ERROR)
+       {
+               printf ("Program error\n");
+               return ERR_PROG_ERROR;
+       }
+
+       /* check Block Erase Suspended, SR.6 */
+       if (code & BIT_ERASE_SUSPEND)
+       {
+               printf ("Block erase suspended\n");
+               return ERR_PROG_ERROR;
+       }
+
+       /* check Program Suspended, SR.2 */
+       if (code & BIT_PROGRAM_SUSPEND)
+       {
+               printf ("Program suspended\n");
+               return ERR_PROG_ERROR;
+       }
+
+       /* OK, no error */
+       return ERR_OK;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int    flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+    ulong result;
+    int iflag, cflag, prot, sect;
+    int rc = ERR_OK;
+
+    /* first look for protection bits */
+
+    if (info->flash_id == FLASH_UNKNOWN)
+       return ERR_UNKNOWN_FLASH_TYPE;
+
+    if ((s_first < 0) || (s_first > s_last)) {
+       return ERR_INVAL;
+    }
+
+    if ((info->flash_id & FLASH_VENDMASK) !=
+       (INTEL_MANUFACT & FLASH_VENDMASK)) {
+       return ERR_UNKNOWN_FLASH_VENDOR;
+    }
+
+    prot = 0;
+    for (sect=s_first; sect<=s_last; ++sect) {
+       if (info->protect[sect]) {
+           prot++;
+       }
+    }
+    if (prot)
+       return ERR_PROTECTED;
+
+    /*
+     * Disable interrupts which might cause a timeout
+     * here. Remember that our exception vectors are
+     * at address 0 in the flash, and we don't want a
+     * (ticker) exception to happen while the flash
+     * chip is in programming mode.
+     */
+    cflag = icache_status();
+    icache_disable();
+    iflag = disable_interrupts();
+
+    /* Start erase on unprotected sectors */
+    for (sect = s_first; sect<=s_last && !ctrlc(); sect++)
+    {
+       printf("Erasing sector %2d ... ", sect);
+
+       /* arm simple, non interrupt dependent timer */
+       reset_timer_masked();
+
+       if (info->protect[sect] == 0)
+       {       /* not protected */
+           vu_long *addr = (vu_long *)(info->start[sect]);
+
+           *addr = PUZZLE_TO_FLASH(CMD_STATUS_RESET);
+           *addr = PUZZLE_TO_FLASH(CMD_ERASE_SETUP);
+           *addr = PUZZLE_TO_FLASH(CMD_ERASE_CONFIRM);
+
+           /* wait until flash is ready */
+           do
+           {
+               /* check timeout */
+               if (get_timer_masked() > CFG_FLASH_ERASE_TOUT)
+               {
+                   *addr = PUZZLE_TO_FLASH(CMD_SUSPEND);
+                   result = BIT_TIMEOUT;
+                   break;
+               }
+
+               result = PUZZLE_FROM_FLASH(*addr);
+           }  while (~result & BIT_BUSY);
+
+           *addr = PUZZLE_TO_FLASH(CMD_READ_ARRAY);
+
+           if ((rc = flash_error(result)) != ERR_OK)
+               goto outahere;
+
+           printf("ok.\n");
+       }
+       else /* it was protected */
+       {
+           printf("protected!\n");
+       }
+    }
+
+    if (ctrlc())
+      printf("User Interrupt!\n");
+
+outahere:
+    /* allow flash to settle - wait 10 ms */
+    udelay_masked(10000);
+
+    if (iflag)
+      enable_interrupts();
+
+    if (cflag)
+      icache_enable();
+
+    return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash
+ */
+
+volatile static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+    vu_long *addr = (vu_long *)dest;
+    ulong result;
+    int rc = ERR_OK;
+    int cflag, iflag;
+
+    /* Check if Flash is (sufficiently) erased
+     */
+    result = PUZZLE_FROM_FLASH(*addr);
+    if ((result & data) != data)
+        return ERR_NOT_ERASED;
+
+    /*
+     * Disable interrupts which might cause a timeout
+     * here. Remember that our exception vectors are
+     * at address 0 in the flash, and we don't want a
+     * (ticker) exception to happen while the flash
+     * chip is in programming mode.
+     */
+    cflag = icache_status();
+    icache_disable();
+    iflag = disable_interrupts();
+
+    *addr = PUZZLE_TO_FLASH(CMD_STATUS_RESET);
+    *addr = PUZZLE_TO_FLASH(CMD_PROGRAM);
+    *addr = data;
+
+    /* arm simple, non interrupt dependent timer */
+    reset_timer_masked();
+
+    /* wait until flash is ready */
+    do
+    {
+       /* check timeout */
+       if (get_timer_masked() > CFG_FLASH_ERASE_TOUT)
+       {
+           *addr = PUZZLE_TO_FLASH(CMD_SUSPEND);
+           result = BIT_TIMEOUT;
+           break;
+       }
+
+       result = PUZZLE_FROM_FLASH(*addr);
+    }  while (~result & BIT_BUSY);
+
+    *addr = PUZZLE_TO_FLASH(CMD_READ_ARRAY);
+
+    rc = flash_error(result);
+
+    if (iflag)
+      enable_interrupts();
+
+    if (cflag)
+      icache_enable();
+
+    return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash.
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+    ulong cp, wp, data;
+    int l;
+    int i, rc;
+
+    wp = (addr & ~3);  /* get lower word aligned address */
+
+    /*
+     * handle unaligned start bytes
+     */
+    if ((l = addr - wp) != 0) {
+       data = 0;
+       for (i=0, cp=wp; i<l; ++i, ++cp) {
+           data = (data >> 8) | (*(uchar *)cp << 24);
+       }
+       for (; i<4 && cnt>0; ++i) {
+           data = (data >> 8) | (*src++ << 24);
+           --cnt;
+           ++cp;
+       }
+       for (; cnt==0 && i<4; ++i, ++cp) {
+           data = (data >> 8) | (*(uchar *)cp << 24);
+       }
+
+       if ((rc = write_word(info, wp, data)) != 0) {
+           return (rc);
+       }
+       wp += 4;
+    }
+
+    /*
+     * handle word aligned part
+     */
+    while (cnt >= 4) {
+       data = *((vu_long*)src);
+       if ((rc = write_word(info, wp, data)) != 0) {
+           return (rc);
+       }
+       src += 4;
+       wp  += 4;
+       cnt -= 4;
+    }
+
+    if (cnt == 0) {
+       return ERR_OK;
+    }
+
+    /*
+     * handle unaligned tail bytes
+     */
+    data = 0;
+    for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+       data = (data >> 8) | (*src++ << 24);
+       --cnt;
+    }
+    for (; i<4; ++i, ++cp) {
+       data = (data >> 8) | (*(uchar *)cp << 24);
+    }
+
+    return write_word(info, wp, data);
+}
diff --git a/board/lubbock/flash.c b/board/lubbock/flash.c
new file mode 100644 (file)
index 0000000..84c09a8
--- /dev/null
@@ -0,0 +1,363 @@
+/*
+ * (C) Copyright 2002
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#define FLASH_BANK_SIZE 0x2000000
+#define MAIN_SECT_SIZE  0x40000         /* 2x16 = 256k per sector */
+
+flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+
+
+/*-----------------------------------------------------------------------
+ */
+
+ulong flash_init(void)
+{
+    int i, j;
+    ulong size = 0;
+
+    for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
+    {
+       ulong flashbase = 0;
+       flash_info[i].flash_id =
+         (INTEL_MANUFACT & FLASH_VENDMASK) |
+         (INTEL_ID_28F128J3 & FLASH_TYPEMASK);
+       flash_info[i].size = FLASH_BANK_SIZE;
+       flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+       memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+        switch (i)
+        {
+           case 0:
+               flashbase = PHYS_FLASH_1;
+                break;
+           case 1:
+               flashbase = PHYS_FLASH_2;
+                break;
+           default:
+               panic("configured to many flash banks!\n");
+                break;
+        }
+       for (j = 0; j < flash_info[i].sector_count; j++)
+       {
+           flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE;
+       }
+       size += flash_info[i].size;
+    }
+
+    /* Protect monitor and environment sectors
+     */
+    flash_protect(FLAG_PROTECT_SET,
+                 CFG_FLASH_BASE,
+                 CFG_FLASH_BASE + _armboot_end_data - _armboot_start,
+                 &flash_info[0]);
+
+    flash_protect(FLAG_PROTECT_SET,
+                 CFG_ENV_ADDR,
+                 CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+                 &flash_info[0]);
+
+    return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+    int i, j;
+
+    for (j=0; j<CFG_MAX_FLASH_BANKS; j++)
+    {
+        switch (info->flash_id & FLASH_VENDMASK)
+        {
+        case (INTEL_MANUFACT & FLASH_VENDMASK):
+               printf("Intel: ");
+               break;
+        default:
+               printf("Unknown Vendor ");
+               break;
+        }
+
+        switch (info->flash_id & FLASH_TYPEMASK)
+        {
+        case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
+               printf("28F128J3 (128Mbit)\n");
+               break;
+        default:
+               printf("Unknown Chip Type\n");
+               goto Done;
+               break;
+        }
+
+        printf("  Size: %ld MB in %d Sectors\n",
+               info->size >> 20, info->sector_count);
+
+        printf("  Sector Start Addresses:");
+        for (i = 0; i < info->sector_count; i++)
+        {
+               if ((i % 5) == 0)
+               {
+               printf ("\n   ");
+               }
+               printf (" %08lX%s", info->start[i],
+                       info->protect[i] ? " (RO)" : "     ");
+        }
+        printf ("\n");
+        info++;
+    }
+
+Done:
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int    flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+    int flag, prot, sect;
+    int rc = ERR_OK;
+
+    if (info->flash_id == FLASH_UNKNOWN)
+       return ERR_UNKNOWN_FLASH_TYPE;
+
+    if ((s_first < 0) || (s_first > s_last)) {
+       return ERR_INVAL;
+    }
+
+    if ((info->flash_id & FLASH_VENDMASK) !=
+       (INTEL_MANUFACT & FLASH_VENDMASK)) {
+       return ERR_UNKNOWN_FLASH_VENDOR;
+    }
+
+    prot = 0;
+    for (sect=s_first; sect<=s_last; ++sect) {
+       if (info->protect[sect]) {
+           prot++;
+       }
+    }
+    if (prot)
+       return ERR_PROTECTED;
+
+    /*
+     * Disable interrupts which might cause a timeout
+     * here. Remember that our exception vectors are
+     * at address 0 in the flash, and we don't want a
+     * (ticker) exception to happen while the flash
+     * chip is in programming mode.
+     */
+    flag = disable_interrupts();
+
+    /* Start erase on unprotected sectors */
+    for (sect = s_first; sect<=s_last && !ctrlc(); sect++) {
+
+       printf("Erasing sector %2d ... ", sect);
+
+       /* arm simple, non interrupt dependent timer */
+       reset_timer_masked();
+
+       if (info->protect[sect] == 0) { /* not protected */
+           vu_short *addr = (vu_short *)(info->start[sect]);
+
+           *addr = 0x20;       /* erase setup */
+           *addr = 0xD0;       /* erase confirm */
+
+           while ((*addr & 0x80) != 0x80) {
+               if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
+                   *addr = 0xB0; /* suspend erase */
+                   *addr = 0xFF;       /* reset to read mode */
+                   rc = ERR_TIMOUT;
+                   goto outahere;
+               }
+           }
+
+           /* clear status register command */
+           *addr = 0x50;
+           /* reset to read mode */
+           *addr = 0xFF;
+       }
+       printf("ok.\n");
+    }
+    if (ctrlc())
+      printf("User Interrupt!\n");
+
+outahere:
+
+    /* allow flash to settle - wait 10 ms */
+    udelay_masked(10000);
+
+    if (flag)
+      enable_interrupts();
+
+    return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash
+ */
+
+static int write_word (flash_info_t *info, ulong dest, ushort data)
+{
+    vu_short *addr = (vu_short *)dest, val;
+    int rc = ERR_OK;
+    int flag;
+
+    /* Check if Flash is (sufficiently) erased
+     */
+    if ((*addr & data) != data)
+        return ERR_NOT_ERASED;
+
+    /*
+     * Disable interrupts which might cause a timeout
+     * here. Remember that our exception vectors are
+     * at address 0 in the flash, and we don't want a
+     * (ticker) exception to happen while the flash
+     * chip is in programming mode.
+     */
+    flag = disable_interrupts();
+
+    /* clear status register command */
+    *addr = 0x50;
+
+    /* program set-up command */
+    *addr = 0x40;
+
+    /* latch address/data */
+    *addr = data;
+
+    /* arm simple, non interrupt dependent timer */
+    reset_timer_masked();
+
+    /* wait while polling the status register */
+    while(((val = *addr) & 0x80) != 0x80)
+    {
+       if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
+           rc = ERR_TIMOUT;
+           /* suspend program command */
+           *addr = 0xB0;
+           goto outahere;
+       }
+    }
+
+    if(val & 0x1A) {   /* check for error */
+        printf("\nFlash write error %02x at address %08lx\n",
+          (int)val, (unsigned long)dest);
+        if(val & (1<<3)) {
+           printf("Voltage range error.\n");
+           rc = ERR_PROG_ERROR;
+           goto outahere;
+        }
+        if(val & (1<<1)) {
+           printf("Device protect error.\n");
+           rc = ERR_PROTECTED;
+           goto outahere;
+        }
+        if(val & (1<<4)) {
+           printf("Programming error.\n");
+           rc = ERR_PROG_ERROR;
+           goto outahere;
+        }
+        rc = ERR_PROG_ERROR;
+        goto outahere;
+    }
+
+outahere:
+    /* read array command */
+    *addr = 0xFF;
+
+    if (flag)
+      enable_interrupts();
+
+    return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash.
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+    ulong cp, wp;
+    ushort data;
+    int l;
+    int i, rc;
+
+    wp = (addr & ~1);  /* get lower word aligned address */
+
+    /*
+     * handle unaligned start bytes
+     */
+    if ((l = addr - wp) != 0) {
+       data = 0;
+       for (i=0, cp=wp; i<l; ++i, ++cp) {
+           data = (data >> 8) | (*(uchar *)cp << 8);
+       }
+       for (; i<2 && cnt>0; ++i) {
+           data = (data >> 8) | (*src++ << 8);
+           --cnt;
+           ++cp;
+       }
+       for (; cnt==0 && i<2; ++i, ++cp) {
+           data = (data >> 8) | (*(uchar *)cp << 8);
+       }
+
+       if ((rc = write_word(info, wp, data)) != 0) {
+           return (rc);
+       }
+       wp += 2;
+    }
+
+    /*
+     * handle word aligned part
+     */
+    while (cnt >= 2) {
+       data = *((vu_short*)src);
+       if ((rc = write_word(info, wp, data)) != 0) {
+           return (rc);
+       }
+       src += 2;
+       wp  += 2;
+       cnt -= 2;
+    }
+
+    if (cnt == 0) {
+       return ERR_OK;
+    }
+
+    /*
+     * handle unaligned tail bytes
+     */
+    data = 0;
+    for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
+       data = (data >> 8) | (*src++ << 8);
+       --cnt;
+    }
+    for (; i<2; ++i, ++cp) {
+       data = (data >> 8) | (*(uchar *)cp << 8);
+    }
+
+    return write_word(info, wp, data);
+}
diff --git a/board/shannon/flash.c b/board/shannon/flash.c
new file mode 100644 (file)
index 0000000..8e0f752
--- /dev/null
@@ -0,0 +1,472 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+ulong myflush(void);
+
+
+#define FLASH_BANK_SIZE 0x400000       /* 4 MB */
+#define MAIN_SECT_SIZE  0x20000                /* 128 KB */
+
+flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+
+
+#define CMD_READ_ARRAY         0x00F000F0
+#define CMD_UNLOCK1            0x00AA00AA
+#define CMD_UNLOCK2            0x00550055
+#define CMD_ERASE_SETUP                0x00800080
+#define CMD_ERASE_CONFIRM      0x00300030
+#define CMD_PROGRAM            0x00A000A0
+#define CMD_UNLOCK_BYPASS      0x00200020
+
+#define MEM_FLASH_ADDR1                (*(volatile u32 *)(CFG_FLASH_BASE + (0x00000555 << 2)))
+#define MEM_FLASH_ADDR2                (*(volatile u32 *)(CFG_FLASH_BASE + (0x000002AA << 2)))
+
+#define BIT_ERASE_DONE         0x00800080
+#define BIT_RDY_MASK           0x00800080
+#define BIT_PROGRAM_ERROR      0x00200020
+#define BIT_TIMEOUT            0x80000000 /* our flag */
+
+#define READY 1
+#define ERR   2
+#define TMO   4
+
+/*-----------------------------------------------------------------------
+ */
+
+ulong flash_init(void)
+{
+    int i, j;
+    ulong size = 0;
+
+    for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
+    {
+       ulong flashbase = 0;
+       flash_info[i].flash_id =
+         (AMD_MANUFACT & FLASH_VENDMASK) |
+         (AMD_ID_LV160B & FLASH_TYPEMASK);
+       flash_info[i].size = FLASH_BANK_SIZE;
+       flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+       memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+       if (i == 0)
+         flashbase = PHYS_FLASH_1;
+       else
+         panic("configured to many flash banks!\n");
+       for (j = 0; j < flash_info[i].sector_count; j++)
+       {
+
+           if (j <= 3)
+           {
+               /* 1st one is 32 KB */
+               if (j == 0)
+               {
+                       flash_info[i].start[j] = flashbase + 0;
+               }
+
+               /* 2nd and 3rd are both 16 KB */
+               if ((j == 1) || (j == 2))
+               {
+                       flash_info[i].start[j] = flashbase + 0x8000 + (j-1)*0x4000;
+               }
+
+               /* 4th 64 KB */
+               if (j == 3)
+               {
+                       flash_info[i].start[j] = flashbase + 0x10000;
+               }
+           }
+           else
+           {
+               flash_info[i].start[j] = flashbase + (j - 3)*MAIN_SECT_SIZE;
+           }
+       }
+       size += flash_info[i].size;
+    }
+
+    /*
+     * Protect monitor and environment sectors
+     * Inferno is complicated, it's hardware locked
+     */
+#ifdef CONFIG_INFERNO
+    /* first one, 0x00000 to 0x07fff */
+    flash_protect(FLAG_PROTECT_SET,
+                 CFG_FLASH_BASE + 0x00000,
+                 CFG_FLASH_BASE + 0x08000 - 1,
+                 &flash_info[0]);
+
+    /* third to 10th, 0x0c000 - 0xdffff */
+    flash_protect(FLAG_PROTECT_SET,
+                 CFG_FLASH_BASE + 0x0c000,
+                 CFG_FLASH_BASE + 0xe0000 - 1,
+                 &flash_info[0]);
+#else
+    flash_protect(FLAG_PROTECT_SET,
+                 CFG_FLASH_BASE,
+                 CFG_FLASH_BASE + _armboot_end_data - _armboot_start,
+                 &flash_info[0]);
+
+    flash_protect(FLAG_PROTECT_SET,
+                 CFG_ENV_ADDR,
+                 CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+                 &flash_info[0]);
+#endif
+    return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+    int i;
+
+    switch (info->flash_id & FLASH_VENDMASK)
+    {
+    case (AMD_MANUFACT & FLASH_VENDMASK):
+       printf("AMD: ");
+       break;
+    default:
+       printf("Unknown Vendor ");
+       break;
+    }
+
+    switch (info->flash_id & FLASH_TYPEMASK)
+    {
+    case (AMD_ID_LV160B & FLASH_TYPEMASK):
+       printf("2x Amd29F160BB (16Mbit)\n");
+       break;
+    default:
+       printf("Unknown Chip Type\n");
+       goto Done;
+       break;
+    }
+
+    printf("  Size: %ld MB in %d Sectors\n",
+          info->size >> 20, info->sector_count);
+
+    printf("  Sector Start Addresses:");
+    for (i = 0; i < info->sector_count; i++)
+    {
+       if ((i % 5) == 0)
+       {
+           printf ("\n   ");
+       }
+       printf (" %08lX%s", info->start[i],
+               info->protect[i] ? " (RO)" : "     ");
+    }
+    printf ("\n");
+
+Done:
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int    flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+    ulong result;
+    int iflag, cflag, prot, sect;
+    int rc = ERR_OK;
+    int chip1, chip2;
+
+    /* first look for protection bits */
+
+    if (info->flash_id == FLASH_UNKNOWN)
+       return ERR_UNKNOWN_FLASH_TYPE;
+
+    if ((s_first < 0) || (s_first > s_last)) {
+       return ERR_INVAL;
+    }
+
+    if ((info->flash_id & FLASH_VENDMASK) !=
+       (AMD_MANUFACT & FLASH_VENDMASK)) {
+       return ERR_UNKNOWN_FLASH_VENDOR;
+    }
+
+    prot = 0;
+    for (sect=s_first; sect<=s_last; ++sect) {
+       if (info->protect[sect]) {
+           prot++;
+       }
+    }
+    if (prot)
+       return ERR_PROTECTED;
+
+    /*
+     * Disable interrupts which might cause a timeout
+     * here. Remember that our exception vectors are
+     * at address 0 in the flash, and we don't want a
+     * (ticker) exception to happen while the flash
+     * chip is in programming mode.
+     */
+    cflag = icache_status();
+    icache_disable();
+    iflag = disable_interrupts();
+
+    /* Start erase on unprotected sectors */
+    for (sect = s_first; sect<=s_last && !ctrlc(); sect++)
+    {
+       printf("Erasing sector %2d ... ", sect);
+
+       /* arm simple, non interrupt dependent timer */
+       reset_timer_masked();
+
+       if (info->protect[sect] == 0)
+       {       /* not protected */
+           vu_long *addr = (vu_long *)(info->start[sect]);
+
+           MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+           MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+           MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
+
+           MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+           MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+           *addr = CMD_ERASE_CONFIRM;
+
+           /* wait until flash is ready */
+           chip1 = chip2 = 0;
+
+           do
+           {
+               result = *addr;
+
+               /* check timeout */
+               if (get_timer_masked() > CFG_FLASH_ERASE_TOUT)
+               {
+                   MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
+                   chip1 = TMO;
+                   break;
+               }
+
+               if (!chip1 && (result & 0xFFFF) & BIT_ERASE_DONE)
+                       chip1 = READY;
+
+               if (!chip1 && (result & 0xFFFF) & BIT_PROGRAM_ERROR)
+                       chip1 = ERR;
+
+               if (!chip2 && (result >> 16) & BIT_ERASE_DONE)
+                       chip2 = READY;
+
+               if (!chip2 && (result >> 16) & BIT_PROGRAM_ERROR)
+                       chip2 = ERR;
+
+           }  while (!chip1 || !chip2);
+
+           MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
+
+           if (chip1 == ERR || chip2 == ERR)
+           {
+               rc = ERR_PROG_ERROR;
+               goto outahere;
+           }
+           if (chip1 == TMO)
+           {
+               rc = ERR_TIMOUT;
+               goto outahere;
+           }
+
+           printf("ok.\n");
+       }
+       else /* it was protected */
+       {
+           printf("protected!\n");
+       }
+    }
+
+    if (ctrlc())
+      printf("User Interrupt!\n");
+
+outahere:
+    /* allow flash to settle - wait 10 ms */
+    udelay_masked(10000);
+
+    if (iflag)
+      enable_interrupts();
+
+    if (cflag)
+      icache_enable();
+
+    return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash
+ */
+
+volatile static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+    vu_long *addr = (vu_long *)dest;
+    ulong result;
+    int rc = ERR_OK;
+    int cflag, iflag;
+    int chip1, chip2;
+
+    /*
+     * Check if Flash is (sufficiently) erased
+     */
+    result = *addr;
+    if ((result & data) != data)
+        return ERR_NOT_ERASED;
+
+
+    /*
+     * Disable interrupts which might cause a timeout
+     * here. Remember that our exception vectors are
+     * at address 0 in the flash, and we don't want a
+     * (ticker) exception to happen while the flash
+     * chip is in programming mode.
+     */
+    cflag = icache_status();
+    icache_disable();
+    iflag = disable_interrupts();
+
+    MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+    MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+    MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS;
+    *addr = CMD_PROGRAM;
+    *addr = data;
+
+    /* arm simple, non interrupt dependent timer */
+    reset_timer_masked();
+
+    /* wait until flash is ready */
+    chip1 = chip2 = 0;
+    do
+    {
+       result = *addr;
+
+       /* check timeout */
+       if (get_timer_masked() > CFG_FLASH_ERASE_TOUT)
+       {
+           chip1 = ERR | TMO;
+           break;
+       }
+       if (!chip1 && ((result & 0x80) == (data & 0x80)))
+               chip1 = READY;
+
+       if (!chip1 && ((result & 0xFFFF) & BIT_PROGRAM_ERROR))
+       {
+               result = *addr;
+
+               if ((result & 0x80) == (data & 0x80))
+                       chip1 = READY;
+               else
+                       chip1 = ERR;
+       }
+
+       if (!chip2 && ((result & (0x80 << 16)) == (data & (0x80 << 16))))
+               chip2 = READY;
+
+       if (!chip2 && ((result >> 16) & BIT_PROGRAM_ERROR))
+       {
+               result = *addr;
+
+               if ((result & (0x80 << 16)) == (data & (0x80 << 16)))
+                       chip2 = READY;
+               else
+                       chip2 = ERR;
+       }
+
+    }  while (!chip1 || !chip2);
+
+    *addr = CMD_READ_ARRAY;
+
+    if (chip1 == ERR || chip2 == ERR || *addr != data)
+        rc = ERR_PROG_ERROR;
+
+    if (iflag)
+      enable_interrupts();
+
+    if (cflag)
+      icache_enable();
+
+    return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash.
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+    ulong cp, wp, data;
+    int l;
+    int i, rc;
+
+    wp = (addr & ~3);  /* get lower word aligned address */
+
+    /*
+     * handle unaligned start bytes
+     */
+    if ((l = addr - wp) != 0) {
+       data = 0;
+       for (i=0, cp=wp; i<l; ++i, ++cp) {
+           data = (data >> 8) | (*(uchar *)cp << 24);
+       }
+       for (; i<4 && cnt>0; ++i) {
+           data = (data >> 8) | (*src++ << 24);
+           --cnt;
+           ++cp;
+       }
+       for (; cnt==0 && i<4; ++i, ++cp) {
+           data = (data >> 8) | (*(uchar *)cp << 24);
+       }
+
+       if ((rc = write_word(info, wp, data)) != 0) {
+           return (rc);
+       }
+       wp += 4;
+    }
+
+    /*
+     * handle word aligned part
+     */
+    while (cnt >= 4) {
+       data = *((vu_long*)src);
+       if ((rc = write_word(info, wp, data)) != 0) {
+           return (rc);
+       }
+       src += 4;
+       wp  += 4;
+       cnt -= 4;
+    }
+
+    if (cnt == 0) {
+       return ERR_OK;
+    }
+
+    /*
+     * handle unaligned tail bytes
+     */
+    data = 0;
+    for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+       data = (data >> 8) | (*src++ << 24);
+       --cnt;
+    }
+    for (; i<4; ++i, ++cp) {
+       data = (data >> 8) | (*(uchar *)cp << 24);
+    }
+
+    return write_word(info, wp, data);
+}
diff --git a/board/smdk2400/flash.c b/board/smdk2400/flash.c
new file mode 100644 (file)
index 0000000..c4d6bae
--- /dev/null
@@ -0,0 +1,491 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* #define DEBUG */
+
+#include <common.h>
+#include <environment.h>
+
+#define FLASH_BANK_SIZE 0x1000000      /* 2 x   8 MB */
+#define MAIN_SECT_SIZE  0x40000                /* 2 x 128 kB */
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+
+#define CMD_READ_ARRAY         0x00FF00FF
+#define CMD_IDENTIFY           0x00900090
+#define CMD_ERASE_SETUP                0x00200020
+#define CMD_ERASE_CONFIRM      0x00D000D0
+#define CMD_PROGRAM            0x00400040
+#define CMD_RESUME             0x00D000D0
+#define CMD_SUSPEND            0x00B000B0
+#define CMD_STATUS_READ                0x00700070
+#define CMD_STATUS_RESET       0x00500050
+
+#define BIT_BUSY               0x00800080
+#define BIT_ERASE_SUSPEND      0x00400040
+#define BIT_ERASE_ERROR                0x00200020
+#define BIT_PROGRAM_ERROR      0x00100010
+#define BIT_VPP_RANGE_ERROR    0x00080008
+#define BIT_PROGRAM_SUSPEND    0x00040004
+#define BIT_PROTECT_ERROR      0x00020002
+#define BIT_UNDEFINED          0x00010001
+
+#define BIT_SEQUENCE_ERROR     0x00300030
+#define BIT_TIMEOUT            0x80000000
+
+/*-----------------------------------------------------------------------
+ */
+
+ulong flash_init (void)
+{
+       int i, j;
+       ulong size = 0;
+
+       for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+               ulong flashbase = 0;
+
+               flash_info[i].flash_id =
+                       (INTEL_MANUFACT     & FLASH_VENDMASK) |
+                       (INTEL_ID_28F640J3A & FLASH_TYPEMASK);
+               flash_info[i].size = FLASH_BANK_SIZE;
+               flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+               memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+               if (i == 0)
+                       flashbase = PHYS_FLASH_1;
+               else
+                       panic ("configured too many flash banks!\n");
+               for (j = 0; j < flash_info[i].sector_count; j++) {
+                       flash_info[i].start[j] = flashbase;
+
+                       /* uniform sector size */
+                       flashbase += MAIN_SECT_SIZE;
+               }
+               size += flash_info[i].size;
+       }
+
+       /*
+        * Protect monitor and environment sectors
+        */
+       flash_protect ( FLAG_PROTECT_SET,
+                       CFG_FLASH_BASE,
+                       CFG_FLASH_BASE + _armboot_end_data - _armboot_start,
+                       &flash_info[0]);
+
+       flash_protect ( FLAG_PROTECT_SET,
+                       CFG_ENV_ADDR,
+                       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+#ifdef CFG_ENV_ADDR_REDUND
+       flash_protect ( FLAG_PROTECT_SET,
+                       CFG_ENV_ADDR_REDUND,
+                       CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
+                       &flash_info[0]);
+#endif
+
+       return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+       int i;
+
+       switch (info->flash_id & FLASH_VENDMASK) {
+       case (INTEL_MANUFACT & FLASH_VENDMASK):
+               printf ("Intel: ");
+               break;
+       default:
+               printf ("Unknown Vendor ");
+               break;
+       }
+
+       switch (info->flash_id & FLASH_TYPEMASK) {
+       case (INTEL_ID_28F640J3A & FLASH_TYPEMASK):
+               printf ("2x 28F640J3A (64Mbit)\n");
+               break;
+       default:
+               printf ("Unknown Chip Type\n");
+               goto Done;
+               break;
+       }
+
+       printf ("  Size: %ld MB in %d Sectors\n",
+                       info->size >> 20, info->sector_count);
+
+       printf ("  Sector Start Addresses:");
+       for (i = 0; i < info->sector_count; i++) {
+               if ((i % 5) == 0) {
+                       printf ("\n   ");
+               }
+               printf (" %08lX%s",
+                       info->start[i],
+                       info->protect[i] ? " (RO)" : "     ");
+       }
+       printf ("\n");
+
+  Done:
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_error (ulong code)
+{
+       /* Check bit patterns */
+       /* SR.7=0 is busy, SR.7=1 is ready */
+       /* all other flags indicate error on 1 */
+       /* SR.0 is undefined */
+       /* Timeout is our faked flag */
+
+       /* sequence is described in Intel 290644-005 document */
+
+       /* check Timeout */
+       if (code & BIT_TIMEOUT) {
+               puts ("Timeout\n");
+               return ERR_TIMOUT;
+       }
+
+       /* check Busy, SR.7 */
+       if (~code & BIT_BUSY) {
+               puts ("Busy\n");
+               return ERR_PROG_ERROR;
+       }
+
+       /* check Vpp low, SR.3 */
+       if (code & BIT_VPP_RANGE_ERROR) {
+               puts ("Vpp range error\n");
+               return ERR_PROG_ERROR;
+       }
+
+       /* check Device Protect Error, SR.1 */
+       if (code & BIT_PROTECT_ERROR) {
+               puts ("Device protect error\n");
+               return ERR_PROG_ERROR;
+       }
+
+       /* check Command Seq Error, SR.4 & SR.5 */
+       if (code & BIT_SEQUENCE_ERROR) {
+               puts ("Command seqence error\n");
+               return ERR_PROG_ERROR;
+       }
+
+       /* check Block Erase Error, SR.5 */
+       if (code & BIT_ERASE_ERROR) {
+               puts ("Block erase error\n");
+               return ERR_PROG_ERROR;
+       }
+
+       /* check Program Error, SR.4 */
+       if (code & BIT_PROGRAM_ERROR) {
+               puts ("Program error\n");
+               return ERR_PROG_ERROR;
+       }
+
+       /* check Block Erase Suspended, SR.6 */
+       if (code & BIT_ERASE_SUSPEND) {
+               puts ("Block erase suspended\n");
+               return ERR_PROG_ERROR;
+       }
+
+       /* check Program Suspended, SR.2 */
+       if (code & BIT_PROGRAM_SUSPEND) {
+               puts ("Program suspended\n");
+               return ERR_PROG_ERROR;
+       }
+
+       /* OK, no error */
+       return ERR_OK;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+       ulong result, result1;
+       int iflag, prot, sect;
+       int rc = ERR_OK;
+
+#ifdef USE_920T_MMU
+       int cflag;
+#endif
+
+       debug ("flash_erase: s_first %d  s_last %d\n", s_first, s_last);
+
+       /* first look for protection bits */
+
+       if (info->flash_id == FLASH_UNKNOWN)
+               return ERR_UNKNOWN_FLASH_TYPE;
+
+       if ((s_first < 0) || (s_first > s_last)) {
+               return ERR_INVAL;
+       }
+
+       if ((info->flash_id & FLASH_VENDMASK) !=
+               (INTEL_MANUFACT & FLASH_VENDMASK)) {
+               return ERR_UNKNOWN_FLASH_VENDOR;
+       }
+
+       prot = 0;
+       for (sect = s_first; sect <= s_last; ++sect) {
+               if (info->protect[sect]) {
+                       prot++;
+               }
+       }
+
+       if (prot) {
+               printf ("- Warning: %d protected sectors will not be erased!\n",
+                       prot);
+       } else {
+               printf ("\n");
+       }
+
+       /*
+        * Disable interrupts which might cause a timeout
+        * here. Remember that our exception vectors are
+        * at address 0 in the flash, and we don't want a
+        * (ticker) exception to happen while the flash
+        * chip is in programming mode.
+        */
+#ifdef USE_920T_MMU
+       cflag = dcache_status ();
+       dcache_disable ();
+#endif
+       iflag = disable_interrupts ();
+
+       /* Start erase on unprotected sectors */
+       for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
+
+               debug ("Erasing sector %2d @ %08lX... ",
+                       sect, info->start[sect]);
+
+               /* arm simple, non interrupt dependent timer */
+               reset_timer_masked ();
+
+               if (info->protect[sect] == 0) { /* not protected */
+                       vu_long *addr = (vu_long *) (info->start[sect]);
+                       ulong bsR7, bsR7_2, bsR5, bsR5_2;
+
+                       /* *addr = CMD_STATUS_RESET; */
+                       *addr = CMD_ERASE_SETUP;
+                       *addr = CMD_ERASE_CONFIRM;
+
+                       /* wait until flash is ready */
+                       do {
+                               /* check timeout */
+                               if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+                                       *addr = CMD_STATUS_RESET;
+                                       result = BIT_TIMEOUT;
+                                       break;
+                               }
+
+                               *addr = CMD_STATUS_READ;
+                               result = *addr;
+                               bsR7 = result & (1 << 7);
+                               bsR7_2 = result & (1 << 23);
+                       } while (!bsR7 | !bsR7_2);
+
+                       *addr = CMD_STATUS_READ;
+                       result1 = *addr;
+                       bsR5 = result1 & (1 << 5);
+                       bsR5_2 = result1 & (1 << 21);
+#ifdef SAMSUNG_FLASH_DEBUG
+                       printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2);
+                       if (bsR5 != 0 && bsR5_2 != 0)
+                               printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2);
+#endif
+
+                       *addr = CMD_READ_ARRAY;
+                       *addr = CMD_RESUME;
+
+                       if ((rc = flash_error (result)) != ERR_OK)
+                               goto outahere;
+#if 0
+                       printf ("ok.\n");
+               } else {                /* it was protected */
+
+                       printf ("protected!\n");
+#endif
+               }
+       }
+
+outahere:
+       /* allow flash to settle - wait 10 ms */
+       udelay_masked (10000);
+
+       if (iflag)
+               enable_interrupts ();
+
+#ifdef USE_920T_MMU
+       if (cflag)
+               dcache_enable ();
+#endif
+       return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash
+ */
+
+volatile static int write_word (flash_info_t * info, ulong dest,
+                                                               ulong data)
+{
+       vu_long *addr = (vu_long *) dest;
+       ulong result;
+       int rc = ERR_OK;
+       int iflag;
+
+#ifdef USE_920T_MMU
+       int cflag;
+#endif
+
+       /*
+        * Check if Flash is (sufficiently) erased
+        */
+       result = *addr;
+       if ((result & data) != data)
+               return ERR_NOT_ERASED;
+
+       /*
+        * Disable interrupts which might cause a timeout
+        * here. Remember that our exception vectors are
+        * at address 0 in the flash, and we don't want a
+        * (ticker) exception to happen while the flash
+        * chip is in programming mode.
+        */
+#ifdef USE_920T_MMU
+       cflag = dcache_status ();
+       dcache_disable ();
+#endif
+       iflag = disable_interrupts ();
+
+       /* *addr = CMD_STATUS_RESET; */
+       *addr = CMD_PROGRAM;
+       *addr = data;
+
+       /* arm simple, non interrupt dependent timer */
+       reset_timer_masked ();
+
+       /* wait until flash is ready */
+       do {
+               /* check timeout */
+               if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+                       *addr = CMD_SUSPEND;
+                       result = BIT_TIMEOUT;
+                       break;
+               }
+
+               *addr = CMD_STATUS_READ;
+               result = *addr;
+       } while (~result & BIT_BUSY);
+
+       /* *addr = CMD_READ_ARRAY; */
+       *addr = CMD_STATUS_READ;
+       result = *addr;
+
+       rc = flash_error (result);
+
+       if (iflag)
+               enable_interrupts ();
+
+#ifdef USE_920T_MMU
+       if (cflag)
+               dcache_enable ();
+#endif
+       *addr = CMD_READ_ARRAY;
+       *addr = CMD_RESUME;
+       return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash.
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+       ulong cp, wp, data;
+       int l;
+       int i, rc;
+
+       wp = (addr & ~3);                       /* get lower word aligned address */
+
+       /*
+        * handle unaligned start bytes
+        */
+       if ((l = addr - wp) != 0) {
+               data = 0;
+               for (i = 0, cp = wp; i < l; ++i, ++cp) {
+                       data = (data >> 8) | (*(uchar *) cp << 24);
+               }
+               for (; i < 4 && cnt > 0; ++i) {
+                       data = (data >> 8) | (*src++ << 24);
+                       --cnt;
+                       ++cp;
+               }
+               for (; cnt == 0 && i < 4; ++i, ++cp) {
+                       data = (data >> 8) | (*(uchar *) cp << 24);
+               }
+
+               if ((rc = write_word (info, wp, data)) != 0) {
+                       return (rc);
+               }
+               wp += 4;
+       }
+
+       /*
+        * handle word aligned part
+        */
+       while (cnt >= 4) {
+               data = *((vu_long *) src);
+               if ((rc = write_word (info, wp, data)) != 0) {
+                       return (rc);
+               }
+               src += 4;
+               wp += 4;
+               cnt -= 4;
+       }
+
+       if (cnt == 0) {
+               return ERR_OK;
+       }
+
+       /*
+        * handle unaligned tail bytes
+        */
+       data = 0;
+       for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
+               data = (data >> 8) | (*src++ << 24);
+               --cnt;
+       }
+       for (; i < 4; ++i, ++cp) {
+               data = (data >> 8) | (*(uchar *) cp << 24);
+       }
+
+       return write_word (info, wp, data);
+}
diff --git a/board/smdk2410/flash.c b/board/smdk2410/flash.c
new file mode 100644 (file)
index 0000000..c2ec235
--- /dev/null
@@ -0,0 +1,446 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+ulong myflush(void);
+
+
+#define FLASH_BANK_SIZE        PHYS_FLASH_SIZE
+#define MAIN_SECT_SIZE  0x10000                /* 64 KB */
+
+flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+
+
+#define CMD_READ_ARRAY         0x000000F0
+#define CMD_UNLOCK1            0x000000AA
+#define CMD_UNLOCK2            0x00000055
+#define CMD_ERASE_SETUP                0x00000080
+#define CMD_ERASE_CONFIRM      0x00000030
+#define CMD_PROGRAM            0x000000A0
+#define CMD_UNLOCK_BYPASS      0x00000020
+
+#define MEM_FLASH_ADDR1                (*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555 << 1)))
+#define MEM_FLASH_ADDR2                (*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA << 1)))
+
+#define BIT_ERASE_DONE         0x00000080
+#define BIT_RDY_MASK           0x00000080
+#define BIT_PROGRAM_ERROR      0x00000020
+#define BIT_TIMEOUT            0x80000000 /* our flag */
+
+#define READY 1
+#define ERR   2
+#define TMO   4
+
+/*-----------------------------------------------------------------------
+ */
+
+ulong flash_init(void)
+{
+    int i, j;
+    ulong size = 0;
+
+    for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
+    {
+       ulong flashbase = 0;
+       flash_info[i].flash_id =
+#if defined(CONFIG_AMD_LV400)
+         (AMD_MANUFACT & FLASH_VENDMASK) |
+         (AMD_ID_LV400B & FLASH_TYPEMASK);
+#elif defined(CONFIG_AMD_LV800)
+         (AMD_MANUFACT & FLASH_VENDMASK) |
+         (AMD_ID_LV800B & FLASH_TYPEMASK);
+#else
+#error "Unknown flash configured"
+#endif
+       flash_info[i].size = FLASH_BANK_SIZE;
+       flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+       memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+       if (i == 0)
+         flashbase = PHYS_FLASH_1;
+       else
+         panic("configured to many flash banks!\n");
+       for (j = 0; j < flash_info[i].sector_count; j++)
+       {
+           if (j <= 3)
+           {
+               /* 1st one is 16 KB */
+               if (j == 0)
+               {
+                       flash_info[i].start[j] = flashbase + 0;
+               }
+
+               /* 2nd and 3rd are both 8 KB */
+               if ((j == 1) || (j == 2))
+               {
+                       flash_info[i].start[j] = flashbase + 0x4000 + (j-1)*0x2000;
+               }
+
+               /* 4th 32 KB */
+               if (j == 3)
+               {
+                       flash_info[i].start[j] = flashbase + 0x8000;
+               }
+           }
+           else
+           {
+               flash_info[i].start[j] = flashbase + (j - 3)*MAIN_SECT_SIZE;
+           }
+       }
+       size += flash_info[i].size;
+    }
+
+    flash_protect(FLAG_PROTECT_SET,
+                 CFG_FLASH_BASE,
+                 CFG_FLASH_BASE + _armboot_end_data - _armboot_start,
+                 &flash_info[0]);
+
+    flash_protect(FLAG_PROTECT_SET,
+                 CFG_ENV_ADDR,
+                 CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+                 &flash_info[0]);
+
+    return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+    int i;
+
+    switch (info->flash_id & FLASH_VENDMASK)
+    {
+    case (AMD_MANUFACT & FLASH_VENDMASK):
+       printf("AMD: ");
+       break;
+    default:
+       printf("Unknown Vendor ");
+       break;
+    }
+
+    switch (info->flash_id & FLASH_TYPEMASK)
+    {
+    case (AMD_ID_LV400B & FLASH_TYPEMASK):
+       printf("1x Amd29LV400BB (4Mbit)\n");
+       break;
+    case (AMD_ID_LV800B & FLASH_TYPEMASK):
+       printf("1x Amd29LV800BB (8Mbit)\n");
+       break;
+    default:
+       printf("Unknown Chip Type\n");
+       goto Done;
+       break;
+    }
+
+    printf("  Size: %ld MB in %d Sectors\n",
+          info->size >> 20, info->sector_count);
+
+    printf("  Sector Start Addresses:");
+    for (i = 0; i < info->sector_count; i++)
+    {
+       if ((i % 5) == 0)
+       {
+           printf ("\n   ");
+       }
+       printf (" %08lX%s", info->start[i],
+               info->protect[i] ? " (RO)" : "     ");
+    }
+    printf ("\n");
+
+Done:
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int    flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+    ushort result;
+    int iflag, cflag, prot, sect;
+    int rc = ERR_OK;
+    int chip;
+
+    /* first look for protection bits */
+
+    if (info->flash_id == FLASH_UNKNOWN)
+       return ERR_UNKNOWN_FLASH_TYPE;
+
+    if ((s_first < 0) || (s_first > s_last)) {
+       return ERR_INVAL;
+    }
+
+    if ((info->flash_id & FLASH_VENDMASK) !=
+       (AMD_MANUFACT & FLASH_VENDMASK)) {
+       return ERR_UNKNOWN_FLASH_VENDOR;
+    }
+
+    prot = 0;
+    for (sect=s_first; sect<=s_last; ++sect) {
+       if (info->protect[sect]) {
+           prot++;
+       }
+    }
+    if (prot)
+       return ERR_PROTECTED;
+
+    /*
+     * Disable interrupts which might cause a timeout
+     * here. Remember that our exception vectors are
+     * at address 0 in the flash, and we don't want a
+     * (ticker) exception to happen while the flash
+     * chip is in programming mode.
+     */
+    cflag = icache_status();
+    icache_disable();
+    iflag = disable_interrupts();
+
+    /* Start erase on unprotected sectors */
+    for (sect = s_first; sect<=s_last && !ctrlc(); sect++)
+    {
+       printf("Erasing sector %2d ... ", sect);
+
+       /* arm simple, non interrupt dependent timer */
+       reset_timer_masked();
+
+       if (info->protect[sect] == 0)
+       {       /* not protected */
+           vu_short *addr = (vu_short *)(info->start[sect]);
+
+           MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+           MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+           MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
+
+           MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+           MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+           *addr = CMD_ERASE_CONFIRM;
+
+           /* wait until flash is ready */
+           chip = 0;
+
+           do
+           {
+               result = *addr;
+
+               /* check timeout */
+               if (get_timer_masked() > CFG_FLASH_ERASE_TOUT)
+               {
+                   MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
+                   chip = TMO;
+                   break;
+               }
+
+               if (!chip && (result & 0xFFFF) & BIT_ERASE_DONE)
+                       chip = READY;
+
+               if (!chip && (result & 0xFFFF) & BIT_PROGRAM_ERROR)
+                       chip = ERR;
+
+           }  while (!chip);
+
+           MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
+
+           if (chip == ERR)
+           {
+               rc = ERR_PROG_ERROR;
+               goto outahere;
+           }
+           if (chip == TMO)
+           {
+               rc = ERR_TIMOUT;
+               goto outahere;
+           }
+
+           printf("ok.\n");
+       }
+       else /* it was protected */
+       {
+           printf("protected!\n");
+       }
+    }
+
+    if (ctrlc())
+      printf("User Interrupt!\n");
+
+outahere:
+    /* allow flash to settle - wait 10 ms */
+    udelay_masked(10000);
+
+    if (iflag)
+      enable_interrupts();
+
+    if (cflag)
+      icache_enable();
+
+    return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash
+ */
+
+volatile static int write_hword (flash_info_t *info, ulong dest, ushort data)
+{
+    vu_short *addr = (vu_short *)dest;
+    ushort result;
+    int rc = ERR_OK;
+    int cflag, iflag;
+    int chip;
+
+    /*
+     * Check if Flash is (sufficiently) erased
+     */
+    result = *addr;
+    if ((result & data) != data)
+        return ERR_NOT_ERASED;
+
+
+    /*
+     * Disable interrupts which might cause a timeout
+     * here. Remember that our exception vectors are
+     * at address 0 in the flash, and we don't want a
+     * (ticker) exception to happen while the flash
+     * chip is in programming mode.
+     */
+    cflag = icache_status();
+    icache_disable();
+    iflag = disable_interrupts();
+
+    MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+    MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+    MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS;
+    *addr = CMD_PROGRAM;
+    *addr = data;
+
+    /* arm simple, non interrupt dependent timer */
+    reset_timer_masked();
+
+    /* wait until flash is ready */
+    chip = 0;
+    do
+    {
+       result = *addr;
+
+       /* check timeout */
+       if (get_timer_masked() > CFG_FLASH_ERASE_TOUT)
+       {
+           chip = ERR | TMO;
+           break;
+       }
+       if (!chip && ((result & 0x80) == (data & 0x80)))
+               chip = READY;
+
+       if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR))
+       {
+               result = *addr;
+
+               if ((result & 0x80) == (data & 0x80))
+                       chip = READY;
+               else
+                       chip = ERR;
+       }
+
+    }  while (!chip);
+
+    *addr = CMD_READ_ARRAY;
+
+    if (chip == ERR || *addr != data)
+        rc = ERR_PROG_ERROR;
+
+    if (iflag)
+      enable_interrupts();
+
+    if (cflag)
+      icache_enable();
+
+    return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash.
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+    ulong cp, wp;
+    int l;
+    int i, rc;
+    ushort data;
+
+    wp = (addr & ~1);  /* get lower word aligned address */
+
+    /*
+     * handle unaligned start bytes
+     */
+    if ((l = addr - wp) != 0) {
+       data = 0;
+       for (i=0, cp=wp; i<l; ++i, ++cp) {
+           data = (data >> 8) | (*(uchar *)cp << 8);
+       }
+       for (; i<2 && cnt>0; ++i) {
+           data = (data >> 8) | (*src++ << 8);
+           --cnt;
+           ++cp;
+       }
+       for (; cnt==0 && i<2; ++i, ++cp) {
+           data = (data >> 8) | (*(uchar *)cp << 8);
+       }
+
+       if ((rc = write_hword(info, wp, data)) != 0) {
+           return (rc);
+       }
+       wp += 2;
+    }
+
+    /*
+     * handle word aligned part
+     */
+    while (cnt >= 2) {
+       data = *((vu_short*)src);
+       if ((rc = write_hword(info, wp, data)) != 0) {
+           return (rc);
+       }
+       src += 2;
+       wp  += 2;
+       cnt -= 2;
+    }
+
+    if (cnt == 0) {
+       return ERR_OK;
+    }
+
+    /*
+     * handle unaligned tail bytes
+     */
+    data = 0;
+    for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
+       data = (data >> 8) | (*src++ << 8);
+       --cnt;
+    }
+    for (; i<2; ++i, ++cp) {
+       data = (data >> 8) | (*(uchar *)cp << 8);
+    }
+
+    return write_hword(info, wp, data);
+}