]> git.sur5r.net Git - u-boot/commitdiff
omap3: cm-t35: extract the splash code from board
authorIgor Grinberg <grinberg@compulab.co.il>
Mon, 3 Nov 2014 09:32:20 +0000 (11:32 +0200)
committerTom Rini <trini@ti.com>
Thu, 6 Nov 2014 16:04:40 +0000 (11:04 -0500)
The splash screen loading code can be reused by other compulab boards.
For now extract it to a common location for further reuse.

This also switches the splash code dependency from CONFIG_LCD to
CONFIG_SPLASH_SCREEN as it should normally be.

In addition this patch fixes the accidental dependency of the
get_board_mem_timings() function on CONFIG_LCD, by just moving the
splash code and leaving the above function intact.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Reviewed-by: Tom Rini <trini@ti.com>
board/compulab/cm_t35/cm_t35.c
board/compulab/common/Makefile
board/compulab/common/common.h
board/compulab/common/splash.c [new file with mode: 0644]

index aca41c8f3d244f3701a1f78b6bbaec3c2549b08c..a3b38ae2d358dab08e3bb8648942d7a88f13e771 100644 (file)
@@ -19,9 +19,7 @@
 #include <i2c.h>
 #include <usb.h>
 #include <mmc.h>
-#include <nand.h>
 #include <twl4030.h>
-#include <bmp_layout.h>
 #include <linux/compiler.h>
 
 #include <asm/io.h>
@@ -54,48 +52,6 @@ static u32 gpmc_net_config[GPMC_MAX_REG] = {
        0
 };
 
-#ifdef CONFIG_LCD
-#ifdef CONFIG_CMD_NAND
-static int splash_load_from_nand(u32 bmp_load_addr)
-{
-       struct bmp_header *bmp_hdr;
-       int res, splash_screen_nand_offset = 0x100000;
-       size_t bmp_size, bmp_header_size = sizeof(struct bmp_header);
-
-       if (bmp_load_addr + bmp_header_size >= gd->start_addr_sp)
-               goto splash_address_too_high;
-
-       res = nand_read_skip_bad(&nand_info[nand_curr_device],
-                       splash_screen_nand_offset, &bmp_header_size,
-                       NULL, nand_info[nand_curr_device].size,
-                       (u_char *)bmp_load_addr);
-       if (res < 0)
-               return res;
-
-       bmp_hdr = (struct bmp_header *)bmp_load_addr;
-       bmp_size = le32_to_cpu(bmp_hdr->file_size);
-
-       if (bmp_load_addr + bmp_size >= gd->start_addr_sp)
-               goto splash_address_too_high;
-
-       return nand_read_skip_bad(&nand_info[nand_curr_device],
-                       splash_screen_nand_offset, &bmp_size,
-                       NULL, nand_info[nand_curr_device].size,
-                       (u_char *)bmp_load_addr);
-
-splash_address_too_high:
-       printf("Error: splashimage address too high. Data overwrites U-Boot "
-               "and/or placed beyond DRAM boundaries.\n");
-
-       return -1;
-}
-#else
-static inline int splash_load_from_nand(void)
-{
-       return -1;
-}
-#endif /* CONFIG_CMD_NAND */
-
 #ifdef CONFIG_SPL_BUILD
 /*
  * Routine: get_board_mem_timings
@@ -112,24 +68,12 @@ void get_board_mem_timings(struct board_sdrc_timings *timings)
 }
 #endif
 
+#define CM_T35_SPLASH_NAND_OFFSET 0x100000
+
 int splash_screen_prepare(void)
 {
-       char *env_splashimage_value;
-       u32 bmp_load_addr;
-
-       env_splashimage_value = getenv("splashimage");
-       if (env_splashimage_value == NULL)
-               return -1;
-
-       bmp_load_addr = simple_strtoul(env_splashimage_value, 0, 16);
-       if (bmp_load_addr == 0) {
-               printf("Error: bad splashimage address specified\n");
-               return -1;
-       }
-
-       return splash_load_from_nand(bmp_load_addr);
+       return cl_splash_screen_prepare(CM_T35_SPLASH_NAND_OFFSET);
 }
-#endif /* CONFIG_LCD */
 
 /*
  * Routine: board_init
index e343bf021051e722eae897e175bca9bd7bfe3167..78237d1f12206ac90d1d315fca72388cbd2f4594 100644 (file)
@@ -9,3 +9,4 @@
 obj-y                          += common.o
 obj-$(CONFIG_SYS_I2C)          += eeprom.o
 obj-$(CONFIG_LCD)              += omap3_display.o
+obj-$(CONFIG_SPLASH_SCREEN)    += splash.o
index ffe1ef8174f21eab57538c1e6244ad73cff63924..7a106d6a24ed1aa38b00b53595084d9107002965 100644 (file)
@@ -24,4 +24,13 @@ static inline int cl_usb_hub_init(int gpio, const char *label)
 static inline void cl_usb_hub_deinit(int gpio) {}
 #endif /* CONFIG_CMD_USB */
 
+#ifdef CONFIG_SPLASH_SCREEN
+int cl_splash_screen_prepare(int nand_offset);
+#else /* !CONFIG_SPLASH_SCREEN */
+static inline int cl_splash_screen_prepare(int nand_offset)
+{
+       return -ENOSYS;
+}
+#endif /* CONFIG_SPLASH_SCREEN */
+
 #endif /* _CL_COMMON_ */
diff --git a/board/compulab/common/splash.c b/board/compulab/common/splash.c
new file mode 100644 (file)
index 0000000..49ed49b
--- /dev/null
@@ -0,0 +1,72 @@
+/*
+ * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors: Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <nand.h>
+#include <bmp_layout.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_CMD_NAND
+static int splash_load_from_nand(u32 bmp_load_addr, int nand_offset)
+{
+       struct bmp_header *bmp_hdr;
+       int res;
+       size_t bmp_size, bmp_header_size = sizeof(struct bmp_header);
+
+       if (bmp_load_addr + bmp_header_size >= gd->start_addr_sp)
+               goto splash_address_too_high;
+
+       res = nand_read_skip_bad(&nand_info[nand_curr_device],
+                       nand_offset, &bmp_header_size,
+                       NULL, nand_info[nand_curr_device].size,
+                       (u_char *)bmp_load_addr);
+       if (res < 0)
+               return res;
+
+       bmp_hdr = (struct bmp_header *)bmp_load_addr;
+       bmp_size = le32_to_cpu(bmp_hdr->file_size);
+
+       if (bmp_load_addr + bmp_size >= gd->start_addr_sp)
+               goto splash_address_too_high;
+
+       return nand_read_skip_bad(&nand_info[nand_curr_device],
+                       nand_offset, &bmp_size,
+                       NULL, nand_info[nand_curr_device].size,
+                       (u_char *)bmp_load_addr);
+
+splash_address_too_high:
+       printf("Error: splashimage address too high. Data overwrites U-Boot "
+               "and/or placed beyond DRAM boundaries.\n");
+
+       return -1;
+}
+#else
+static inline int splash_load_from_nand(u32 bmp_load_addr, int nand_offset)
+{
+       return -1;
+}
+#endif /* CONFIG_CMD_NAND */
+
+int cl_splash_screen_prepare(int nand_offset)
+{
+       char *env_splashimage_value;
+       u32 bmp_load_addr;
+
+       env_splashimage_value = getenv("splashimage");
+       if (env_splashimage_value == NULL)
+               return -1;
+
+       bmp_load_addr = simple_strtoul(env_splashimage_value, 0, 16);
+       if (bmp_load_addr == 0) {
+               printf("Error: bad splashimage address specified\n");
+               return -1;
+       }
+
+       return splash_load_from_nand(bmp_load_addr, nand_offset);
+}