]> git.sur5r.net Git - u-boot/commitdiff
85xx: Add P2020DS support
authorSrikanth Srinivasan <srikanth.srinivasan@freescale.com>
Fri, 3 Apr 2009 20:36:13 +0000 (15:36 -0500)
committerKumar Gala <galak@kernel.crashing.org>
Fri, 12 Jun 2009 22:16:25 +0000 (17:16 -0500)
The patch adds support for P2020DS reference platform.
DDR3 interface uses hard-coded initialization rather than SPD
for now and was tested at 667Mhz. Some PIXIS register
definitions and associated code sections need to be fixed.
TSEC1/2/3, NOR flash, MAC/SYS ID EEPROM, PCIE1/2/3 are all
tested under u-boot.

Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
Signed-off-by: Travis Wheatley <Travis.Wheatley@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
MAKEALL
Makefile
board/freescale/p2020ds/Makefile [new file with mode: 0644]
board/freescale/p2020ds/config.mk [new file with mode: 0644]
board/freescale/p2020ds/ddr.c [new file with mode: 0644]
board/freescale/p2020ds/law.c [new file with mode: 0644]
board/freescale/p2020ds/p2020ds.c [new file with mode: 0644]
board/freescale/p2020ds/tlb.c [new file with mode: 0644]
board/freescale/p2020ds/u-boot.lds [new file with mode: 0644]
include/configs/P2020DS.h [new file with mode: 0644]

diff --git a/MAKEALL b/MAKEALL
index f48a08e579b0f5ab7a813314550d9656b9a42490..344a8ecfb97329102bda080e1562b7e217c8ff66 100755 (executable)
--- a/MAKEALL
+++ b/MAKEALL
@@ -382,6 +382,8 @@ LIST_85xx="         \
        MPC8569MDS      \
        MPC8572DS       \
        MPC8572DS_36BIT \
+       P2020DS         \
+       P2020DS_36BIT   \
        PM854           \
        PM856           \
        sbc8540         \
index aa4646f4c16dd2880639da2a1f21db53be7b7a53..89808e51ed95757476446fc987cbf66aa9ecab88 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -2481,6 +2481,15 @@ MPC8572DS_config:       unconfig
        fi
        @$(MKCONFIG) -a MPC8572DS ppc mpc85xx mpc8572ds freescale
 
+P2020DS_36BIT_config \
+P2020DS_config:                unconfig
+       @mkdir -p $(obj)include
+       @if [ "$(findstring _36BIT_,$@)" ] ; then \
+               echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
+               $(XECHO) "... enabling 36-bit physical addressing." ; \
+       fi
+       @$(MKCONFIG) -a P2020DS ppc mpc85xx p2020ds freescale
+
 PM854_config:  unconfig
        @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
 
diff --git a/board/freescale/p2020ds/Makefile b/board/freescale/p2020ds/Makefile
new file mode 100644 (file)
index 0000000..41032ac
--- /dev/null
@@ -0,0 +1,54 @@
+#
+# Copyright 2007-2009 Freescale Semiconductor, Inc.
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB    = $(obj)lib$(BOARD).a
+
+COBJS-y        += $(BOARD).o
+COBJS-y        += ddr.o
+COBJS-y        += law.o
+COBJS-y        += tlb.o
+
+SRCS   := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS   := $(addprefix $(obj),$(COBJS-y))
+SOBJS  := $(addprefix $(obj),$(SOBJS))
+
+$(LIB):        $(obj).depend $(OBJS) $(SOBJS)
+       $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+       rm -f $(OBJS) $(SOBJS)
+
+distclean:     clean
+       rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/p2020ds/config.mk b/board/freescale/p2020ds/config.mk
new file mode 100644 (file)
index 0000000..18bdc86
--- /dev/null
@@ -0,0 +1,32 @@
+#
+# Copyright 2007-2009 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# p2020ds board
+#
+ifndef TEXT_BASE
+TEXT_BASE = 0xeff80000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_E500=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
+PLATFORM_CPPFLAGS += -DCONFIG_P2020=1
diff --git a/board/freescale/p2020ds/ddr.c b/board/freescale/p2020ds/ddr.c
new file mode 100644 (file)
index 0000000..b9c0cb2
--- /dev/null
@@ -0,0 +1,130 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <i2c.h>
+
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
+
+static void get_spd(ddr3_spd_eeprom_t *spd, unsigned char i2c_address)
+{
+       i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr3_spd_eeprom_t));
+}
+
+unsigned int fsl_ddr_get_mem_data_rate(void)
+{
+       return get_ddr_freq(0);
+}
+
+void fsl_ddr_get_spd(ddr3_spd_eeprom_t *ctrl_dimms_spd,
+                     unsigned int ctrl_num)
+{
+       unsigned int i;
+       unsigned int i2c_address = 0;
+
+       for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
+               if (ctrl_num == 0 && i == 0)
+                       i2c_address = SPD_EEPROM_ADDRESS1;
+               get_spd(&(ctrl_dimms_spd[i]), i2c_address);
+       }
+}
+
+typedef struct {
+       u32 datarate_mhz_low;
+       u32 datarate_mhz_high;
+       u32 n_ranks;
+       u32 clk_adjust;
+       u32 cpo;
+       u32 write_data_delay;
+       u32 force_2T;
+} board_specific_parameters_t;
+
+/* ranges for parameters:
+ *  wr_data_delay = 0-6
+ *  clk adjust = 0-8
+ *  cpo 2-0x1E (30)
+ */
+
+
+/* XXX: these values need to be checked for all interleaving modes.  */
+/* XXX: No reliable dual-rank 800 MHz setting has been found.  It may
+ *      seem reliable, but errors will appear when memory intensive
+ *      program is run. */
+/* XXX: Single rank at 800 MHz is OK.  */
+const board_specific_parameters_t board_specific_parameters[][20] = {
+       {
+       /*      memory controller 0                     */
+       /*        lo|  hi|  num|  clk| cpo|wrdata|2T    */
+       /*       mhz| mhz|ranks|adjst|    | delay|      */
+               {  0, 333,    2,    6,   7,    3,  0},
+               {334, 400,    2,    6,   9,    3,  0},
+               {401, 549,    2,    6,  11,    3,  0},
+               {550, 680,    2,    1,  10,    5,  0},
+               {681, 850,    2,    1,  12,    5,  1},
+               {  0, 333,    1,    6,   7,    3,  0},
+               {334, 400,    1,    6,   9,    3,  0},
+               {401, 549,    1,    6,  11,    3,  0},
+               {550, 680,    1,    1,  10,    5,  0},
+               {681, 850,    1,    1,  12,    5,  0}
+       },
+};
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+                               dimm_params_t *pdimm,
+                               unsigned int ctrl_num)
+{
+       const board_specific_parameters_t *pbsp =
+                               &(board_specific_parameters[ctrl_num][0]);
+       u32 num_params = sizeof(board_specific_parameters[ctrl_num]) /
+                               sizeof(board_specific_parameters[0][0]);
+       u32 i;
+       ulong ddr_freq;
+
+       /* set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in
+        * that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If
+        * there are two dimms in the controller, set odt_rd_cfg to 3 and
+        * odt_wr_cfg to 3 for the even CS, 0 for the odd CS.
+        */
+       for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+               if (i&1) {      /* odd CS */
+                       popts->cs_local_opts[i].odt_rd_cfg = 0;
+                       popts->cs_local_opts[i].odt_wr_cfg = 0;
+               } else {        /* even CS */
+                       if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) {
+                               popts->cs_local_opts[i].odt_rd_cfg = 0;
+                               popts->cs_local_opts[i].odt_wr_cfg = 4;
+                       } else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) {
+                               popts->cs_local_opts[i].odt_rd_cfg = 3;
+                               popts->cs_local_opts[i].odt_wr_cfg = 3;
+                       }
+               }
+       }
+
+       /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
+        * freqency and n_banks specified in board_specific_parameters table.
+        */
+       ddr_freq = get_ddr_freq(0) / 1000000;
+       for (i = 0; i < num_params; i++) {
+               if (ddr_freq >= pbsp->datarate_mhz_low &&
+                   ddr_freq <= pbsp->datarate_mhz_high &&
+                   pdimm->n_ranks == pbsp->n_ranks) {
+                       popts->clk_adjust = pbsp->clk_adjust;
+                       popts->cpo_override = pbsp->cpo;
+                       popts->write_data_delay = pbsp->write_data_delay;
+                       popts->twoT_en = pbsp->force_2T;
+               }
+               pbsp++;
+       }
+
+       /*
+        * Factors to consider for half-strength driver enable:
+        *      - number of DIMMs installed
+        */
+       popts->half_strength_driver_enable = 0;
+}
diff --git a/board/freescale/p2020ds/law.c b/board/freescale/p2020ds/law.c
new file mode 100644 (file)
index 0000000..da297c5
--- /dev/null
@@ -0,0 +1,42 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+struct law_entry law_table[] = {
+       SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+       SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_1),
+       SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
+       SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2),
+       SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2),
+       SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_3),
+       SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_3),
+       SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC),
+       SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c
new file mode 100644 (file)
index 0000000..6b72d61
--- /dev/null
@@ -0,0 +1,634 @@
+/*
+ * Copyright 2007-2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_pci.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/io.h>
+#include <miiphy.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <tsec.h>
+#include <asm/fsl_law.h>
+#include <asm/mp.h>
+
+#include "../common/pixis.h"
+#include "../common/sgmii_riser.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+phys_size_t fixed_sdram(void);
+
+int checkboard(void)
+{
+       puts("Board: P2020DS ");
+#ifdef CONFIG_PHYS_64BIT
+       puts("(36-bit addrmap) ");
+#endif
+       printf("Sys ID: 0x%02x, "
+               "Sys Ver: 0x%02x, FPGA Ver: 0x%02x\n",
+               in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER),
+               in8(PIXIS_BASE + PIXIS_PVER));
+       return 0;
+}
+
+phys_size_t initdram(int board_type)
+{
+       phys_size_t dram_size = 0;
+
+       puts("Initializing....");
+
+#ifdef CONFIG_SPD_EEPROM
+       dram_size = fsl_ddr_sdram();
+#else
+       dram_size = fixed_sdram();
+
+       if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
+                        dram_size,
+                        LAW_TRGT_IF_DDR) < 0) {
+               printf("ERROR setting Local Access Windows for DDR\n");
+               return 0;
+       };
+#endif
+       dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+       dram_size *= 0x100000;
+
+       puts("    DDR: ");
+       return dram_size;
+}
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*
+ * Fixed sdram init -- doesn't use serial presence detect.
+ */
+
+phys_size_t fixed_sdram(void)
+{
+       volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+       uint d_init;
+
+       ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
+       ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+       ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+       ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
+       ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
+       ddr->sdram_md_cntl = CONFIG_SYS_DDR_MODE_CTRL;
+       ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
+       ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
+       ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
+       ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2;
+       ddr->ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL;
+       ddr->ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL;
+       ddr->ddr_cdr1 = CONFIG_SYS_DDR_CDR1;
+       ddr->timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4;
+       ddr->timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5;
+
+       if (!strcmp("performance", getenv("perf_mode"))) {
+               /* Performance Mode Values */
+
+               ddr->cs1_config = CONFIG_SYS_DDR_CS1_CONFIG_PERF;
+               ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS_PERF;
+               ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS_PERF;
+               ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_PERF;
+               ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_PERF;
+
+               asm("sync;isync");
+
+               udelay(500);
+
+               ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL_PERF;
+       } else {
+               /* Stable Mode Values */
+
+               ddr->cs1_config = CONFIG_SYS_DDR_CS1_CONFIG;
+               ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
+               ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS;
+               ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+               ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+
+               /* ECC will be assumed in stable mode */
+               ddr->err_int_en = CONFIG_SYS_DDR_ERR_INT_EN;
+               ddr->err_disable = CONFIG_SYS_DDR_ERR_DIS;
+               ddr->err_sbe = CONFIG_SYS_DDR_SBE;
+
+               asm("sync;isync");
+
+               udelay(500);
+
+               ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
+       }
+
+#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+       d_init = 1;
+       debug("DDR - 1st controller: memory initializing\n");
+       /*
+        * Poll until memory is initialized.
+        * 512 Meg at 400 might hit this 200 times or so.
+        */
+       while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0)
+               udelay(1000);
+       debug("DDR: memory initialized\n\n");
+       asm("sync; isync");
+       udelay(500);
+#endif
+
+       return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
+}
+
+#endif
+
+#ifdef CONFIG_PCIE1
+static struct pci_controller pcie1_hose;
+#endif
+
+#ifdef CONFIG_PCIE2
+static struct pci_controller pcie2_hose;
+#endif
+
+#ifdef CONFIG_PCIE3
+static struct pci_controller pcie3_hose;
+#endif
+
+int first_free_busno = 0;
+
+#ifdef CONFIG_PCI
+void pci_init_board(void)
+{
+       volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+       uint devdisr = gur->devdisr;
+       uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+       uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+
+       volatile ccsr_fsl_pci_t *pci;
+       struct pci_controller *hose;
+       int pcie_ep, pcie_configured;
+       struct pci_region *r;
+/*             u32 temp32; */
+
+       debug("   pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
+                       devdisr, io_sel, host_agent);
+
+       if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
+               printf("    eTSEC2 is in sgmii mode.\n");
+       if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
+               printf("    eTSEC3 is in sgmii mode.\n");
+
+#ifdef CONFIG_PCIE2
+       pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
+       hose = &pcie2_hose;
+       pcie_ep = (host_agent == 2) || (host_agent == 4) ||
+                 (host_agent == 6) || (host_agent == 0);
+       pcie_configured = (io_sel == 0x2) || (io_sel == 0xe);
+       r = hose->regions;
+
+       if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)) {
+               printf("\n    PCIE2 connected to ULI as %s (base addr %x)",
+                               pcie_ep ? "End Point" : "Root Complex",
+                               (uint)pci);
+               if (pci->pme_msg_det) {
+                       pci->pme_msg_det = 0xffffffff;
+                       debug(" with errors.  Clearing.  Now 0x%08x",
+                               pci->pme_msg_det);
+               }
+               printf("\n");
+
+               /* inbound */
+               r += fsl_pci_setup_inbound_windows(r);
+
+               /* outbound memory */
+               pci_set_region(r++,
+                               CONFIG_SYS_PCIE2_MEM_BUS,
+                               CONFIG_SYS_PCIE2_MEM_PHYS,
+                               CONFIG_SYS_PCIE2_MEM_SIZE,
+                               PCI_REGION_MEM);
+
+               /* outbound io */
+               pci_set_region(r++,
+                               CONFIG_SYS_PCIE2_IO_BUS,
+                               CONFIG_SYS_PCIE2_IO_PHYS,
+                               CONFIG_SYS_PCIE2_IO_SIZE,
+                               PCI_REGION_IO);
+
+               hose->region_count = r - hose->regions;
+               hose->first_busno = first_free_busno;
+               pci_setup_indirect(hose, (int)&pci->cfg_addr,
+                                 (int)&pci->cfg_data);
+
+               fsl_pci_init(hose);
+               first_free_busno = hose->last_busno+1;
+               printf("    PCIE2 on bus %02x - %02x\n",
+                       hose->first_busno, hose->last_busno);
+
+               /*
+                * The workaround doesn't work on p2020 because the location
+                * we try and read isn't valid on p2020, fix this later
+                */
+#if 0
+               /*
+                * Activate ULI1575 legacy chip by performing a fake
+                * memory access.  Needed to make ULI RTC work.
+                * Device 1d has the first on-board memory BAR.
+                */
+
+               pci_hose_read_config_dword(hose, PCI_BDF(2, 0x1d, 0),
+                               PCI_BASE_ADDRESS_1, &temp32);
+               if (temp32 >= CONFIG_SYS_PCIE3_MEM_BUS) {
+                       void *p = pci_mem_to_virt(PCI_BDF(2, 0x1d, 0),
+                                                       temp32, 4, 0);
+                       debug(" uli1575 read to %p\n", p);
+                       in_be32(p);
+               }
+#endif
+       } else {
+               printf("    PCIE2: disabled\n");
+       }
+#else
+       gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */
+#endif
+
+#ifdef CONFIG_PCIE3
+       pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
+       hose = &pcie3_hose;
+       pcie_ep = (host_agent == 0) || (host_agent == 3) ||
+               (host_agent == 5) || (host_agent == 6);
+       pcie_configured = (io_sel == 0x2) || (io_sel == 0x4);
+       r = hose->regions;
+
+       if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)) {
+               printf("\n    PCIE3 connected to Slot 1 as %s (base addr %x)",
+                               pcie_ep ? "End Point" : "Root Complex",
+                               (uint)pci);
+               if (pci->pme_msg_det) {
+                       pci->pme_msg_det = 0xffffffff;
+                       debug(" with errors.  Clearing.  Now 0x%08x",
+                               pci->pme_msg_det);
+               }
+               printf("\n");
+
+               /* inbound */
+               r += fsl_pci_setup_inbound_windows(r);
+
+               /* outbound memory */
+               pci_set_region(r++,
+                               CONFIG_SYS_PCIE3_MEM_BUS,
+                               CONFIG_SYS_PCIE3_MEM_PHYS,
+                               CONFIG_SYS_PCIE3_MEM_SIZE,
+                               PCI_REGION_MEM);
+
+               /* outbound io */
+               pci_set_region(r++,
+                               CONFIG_SYS_PCIE3_IO_BUS,
+                               CONFIG_SYS_PCIE3_IO_PHYS,
+                               CONFIG_SYS_PCIE3_IO_SIZE,
+                               PCI_REGION_IO);
+
+               hose->region_count = r - hose->regions;
+               hose->first_busno = first_free_busno;
+               pci_setup_indirect(hose, (int)&pci->cfg_addr,
+                                 (int)&pci->cfg_data);
+
+               fsl_pci_init(hose);
+
+               first_free_busno = hose->last_busno+1;
+               printf("    PCIE3 on bus %02x - %02x\n",
+                               hose->first_busno, hose->last_busno);
+
+       } else {
+               printf("    PCIE3: disabled\n");
+       }
+#else
+       gur->devdisr |= MPC85xx_DEVDISR_PCIE3; /* disable */
+#endif
+
+#ifdef CONFIG_PCIE1
+       pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
+       hose = &pcie1_hose;
+       pcie_ep = (host_agent <= 1) || (host_agent == 4) || (host_agent == 5);
+       pcie_configured  = (io_sel & 6) || (io_sel == 0xE) || (io_sel == 0xF);
+       r = hose->regions;
+
+       if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)) {
+               printf("\n    PCIE1 connected to Slot 2 as %s (base addr %x)",
+                               pcie_ep ? "End Point" : "Root Complex",
+                               (uint)pci);
+               if (pci->pme_msg_det) {
+                       pci->pme_msg_det = 0xffffffff;
+                       debug(" with errors.  Clearing.  Now 0x%08x",
+                               pci->pme_msg_det);
+               }
+               printf("\n");
+
+               /* inbound */
+               r += fsl_pci_setup_inbound_windows(r);
+
+               /* outbound memory */
+               pci_set_region(r++,
+                               CONFIG_SYS_PCIE1_MEM_BUS,
+                               CONFIG_SYS_PCIE1_MEM_PHYS,
+                               CONFIG_SYS_PCIE1_MEM_SIZE,
+                               PCI_REGION_MEM);
+
+               /* outbound io */
+               pci_set_region(r++,
+                               CONFIG_SYS_PCIE1_IO_BUS,
+                               CONFIG_SYS_PCIE1_IO_PHYS,
+                               CONFIG_SYS_PCIE1_IO_SIZE,
+                               PCI_REGION_IO);
+
+               hose->region_count = r - hose->regions;
+               hose->first_busno = first_free_busno;
+
+               pci_setup_indirect(hose, (int)&pci->cfg_addr,
+                                 (int)&pci->cfg_data);
+
+               fsl_pci_init(hose);
+
+               first_free_busno = hose->last_busno+1;
+               printf("    PCIE1 on bus %02x - %02x\n",
+                       hose->first_busno, hose->last_busno);
+
+       } else {
+               printf("    PCIE1: disabled\n");
+       }
+#else
+       gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+#endif
+}
+#endif
+
+int board_early_init_r(void)
+{
+       const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+       const u8 flash_esel = 2;
+
+       /*
+        * Remap Boot flash + PROMJET region to caching-inhibited
+        * so that flash can be erased properly.
+        */
+
+       /* Flush d-cache and invalidate i-cache of any FLASH data */
+       flush_dcache();
+       invalidate_icache();
+
+       /* invalidate existing TLB entry for flash + promjet */
+       disable_tlb(flash_esel);
+
+       set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
+                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+                       0, flash_esel, BOOKE_PAGESZ_256M, 1);
+
+       return 0;
+}
+
+#ifdef CONFIG_GET_CLK_FROM_ICS307
+/* decode S[0-2] to Output Divider (OD) */
+static unsigned char ics307_S_to_OD[] = {
+       10, 2, 8, 4, 5, 7, 3, 6
+};
+
+/* Calculate frequency being generated by ICS307-02 clock chip based upon
+ * the control bytes being programmed into it. */
+/* XXX: This function should probably go into a common library */
+static unsigned long
+ics307_clk_freq(unsigned char cw0, unsigned char cw1, unsigned char cw2)
+{
+       const unsigned long InputFrequency = CONFIG_ICS307_REFCLK_HZ;
+       unsigned long VDW = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1);
+       unsigned long RDW = cw2 & 0x7F;
+       unsigned long OD = ics307_S_to_OD[cw0 & 0x7];
+       unsigned long freq;
+
+       /* CLK1Frequency = InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD) */
+
+       /* cw0:  C1 C0 TTL F1 F0 S2 S1 S0
+        * cw1:  V8 V7 V6 V5 V4 V3 V2 V1
+        * cw2:  V0 R6 R5 R4 R3 R2 R1 R0
+        *
+        * R6:R0 = Reference Divider Word (RDW)
+        * V8:V0 = VCO Divider Word (VDW)
+        * S2:S0 = Output Divider Select (OD)
+        * F1:F0 = Function of CLK2 Output
+        * TTL = duty cycle
+        * C1:C0 = internal load capacitance for cyrstal
+        */
+
+       /* Adding 1 to get a "nicely" rounded number, but this needs
+        * more tweaking to get a "properly" rounded number. */
+
+       freq = 1 + (InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD));
+
+       debug("ICS307: CW[0-2]: %02X %02X %02X => %lu Hz\n", cw0, cw1, cw2,
+                       freq);
+       return freq;
+}
+
+unsigned long get_board_sys_clk(ulong dummy)
+{
+       return gd->bus_clk;
+}
+
+unsigned long get_board_ddr_clk(ulong dummy)
+{
+       return gd->mem_clk;
+}
+
+unsigned long
+calculate_board_sys_clk(ulong dummy)
+{
+       ulong val;
+       val = ics307_clk_freq(
+           in8(PIXIS_BASE + PIXIS_VSYSCLK0),
+           in8(PIXIS_BASE + PIXIS_VSYSCLK1),
+           in8(PIXIS_BASE + PIXIS_VSYSCLK2));
+       debug("sysclk val = %lu\n", val);
+       return val;
+}
+
+unsigned long
+calculate_board_ddr_clk(ulong dummy)
+{
+       ulong val;
+       val = ics307_clk_freq(
+           in8(PIXIS_BASE + PIXIS_VDDRCLK0),
+           in8(PIXIS_BASE + PIXIS_VDDRCLK1),
+           in8(PIXIS_BASE + PIXIS_VDDRCLK2));
+       debug("ddrclk val = %lu\n", val);
+       return val;
+}
+#else
+unsigned long get_board_sys_clk(ulong dummy)
+{
+       u8 i;
+       ulong val = 0;
+
+       i = in8(PIXIS_BASE + PIXIS_SPD);
+       i &= 0x07;
+
+       switch (i) {
+               case 0:
+                       val = 33333333;
+                       break;
+               case 1:
+                       val = 40000000;
+                       break;
+               case 2:
+                       val = 50000000;
+                       break;
+               case 3:
+                       val = 66666666;
+                       break;
+               case 4:
+                       val = 83333333;
+                       break;
+               case 5:
+                       val = 100000000;
+                       break;
+               case 6:
+                       val = 133333333;
+                       break;
+               case 7:
+                       val = 166666666;
+                       break;
+       }
+
+       return val;
+}
+
+unsigned long get_board_ddr_clk(ulong dummy)
+{
+       u8 i;
+       ulong val = 0;
+
+       i = in8(PIXIS_BASE + PIXIS_SPD);
+       i &= 0x38;
+       i >>= 3;
+
+       switch (i) {
+               case 0:
+                       val = 33333333;
+                       break;
+               case 1:
+                       val = 40000000;
+                       break;
+               case 2:
+                       val = 50000000;
+                       break;
+               case 3:
+                       val = 66666666;
+                       break;
+               case 4:
+                       val = 83333333;
+                       break;
+               case 5:
+                       val = 100000000;
+                       break;
+               case 6:
+                       val = 133333333;
+                       break;
+               case 7:
+                       val = 166666666;
+                       break;
+       }
+       return val;
+}
+#endif
+
+#ifdef CONFIG_TSEC_ENET
+int board_eth_init(bd_t *bis)
+{
+       struct tsec_info_struct tsec_info[4];
+       volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+       int num = 0;
+
+#ifdef CONFIG_TSEC1
+       SET_STD_TSEC_INFO(tsec_info[num], 1);
+       num++;
+#endif
+#ifdef CONFIG_TSEC2
+       SET_STD_TSEC_INFO(tsec_info[num], 2);
+       if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
+               tsec_info[num].flags |= TSEC_SGMII;
+       num++;
+#endif
+#ifdef CONFIG_TSEC3
+       SET_STD_TSEC_INFO(tsec_info[num], 3);
+       if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
+               tsec_info[num].flags |= TSEC_SGMII;
+       num++;
+#endif
+
+       if (!num) {
+               printf("No TSECs initialized\n");
+
+               return 0;
+       }
+
+#ifdef CONFIG_FSL_SGMII_RISER
+       fsl_sgmii_riser_init(tsec_info, num);
+#endif
+
+       tsec_eth_init(bis, tsec_info, num);
+
+       return 0;
+}
+#endif
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+       phys_addr_t base;
+       phys_size_t size;
+
+       ft_cpu_setup(blob, bd);
+
+       base = getenv_bootm_low();
+       size = getenv_bootm_size();
+
+       fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+#ifdef CONFIG_PCIE3
+       ft_fsl_pci_setup(blob, "pci0", &pcie3_hose);
+#endif
+#ifdef CONFIG_PCIE2
+       ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
+#endif
+#ifdef CONFIG_PCIE1
+       ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
+#endif
+#ifdef CONFIG_FSL_SGMII_RISER
+       fsl_sgmii_riser_fdt_fixup(blob);
+#endif
+}
+#endif
+
+#ifdef CONFIG_MP
+void board_lmb_reserve(struct lmb *lmb)
+{
+       cpu_mp_lmb_reserve(lmb);
+}
+#endif
diff --git a/board/freescale/p2020ds/tlb.c b/board/freescale/p2020ds/tlb.c
new file mode 100644 (file)
index 0000000..b2e562a
--- /dev/null
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+       /* TLB 0 - for temp stack in cache */
+       SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
+                     MAS3_SX|MAS3_SW|MAS3_SR, 0,
+                     0, 0, BOOKE_PAGESZ_4K, 0),
+       SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+                     CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+                     MAS3_SX|MAS3_SW|MAS3_SR, 0,
+                     0, 0, BOOKE_PAGESZ_4K, 0),
+       SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+                     CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+                     MAS3_SX|MAS3_SW|MAS3_SR, 0,
+                     0, 0, BOOKE_PAGESZ_4K, 0),
+       SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+                     CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+                     MAS3_SX|MAS3_SW|MAS3_SR, 0,
+                     0, 0, BOOKE_PAGESZ_4K, 0),
+
+       /* TLB 1 */
+       /* *I*** - Covers boot page */
+       SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
+                     MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I,
+                     0, 0, BOOKE_PAGESZ_4K, 1),
+
+       /* *I*G* - CCSRBAR */
+       SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+                     MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+                     0, 1, BOOKE_PAGESZ_1M, 1),
+
+       /* W**G* - Flash/promjet, localbus */
+       /* This will be changed to *I*G* after relocation to RAM. */
+       SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
+                     MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
+                     0, 2, BOOKE_PAGESZ_256M, 1),
+
+       /* *I*G* - PCI */
+       SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS,
+                     MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+                     0, 3, BOOKE_PAGESZ_1G, 1),
+
+       /* *I*G* - PCI */
+       SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x40000000,
+                     CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000,
+                     MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+                     0, 4, BOOKE_PAGESZ_256M, 1),
+
+       SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x50000000,
+                     CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000,
+                     MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+                     0, 5, BOOKE_PAGESZ_256M, 1),
+
+       /* *I*G* - PCI I/O */
+       SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_VIRT, CONFIG_SYS_PCIE3_IO_PHYS,
+                     MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+                     0, 6, BOOKE_PAGESZ_256K, 1),
+
+       /* *I*G - NAND */
+       SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+                     MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+                     0, 7, BOOKE_PAGESZ_1M, 1),
+
+       SET_TLB_ENTRY(1, PIXIS_BASE, PIXIS_BASE_PHYS,
+                     MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+                     0, 8, BOOKE_PAGESZ_4K, 1),
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/p2020ds/u-boot.lds b/board/freescale/p2020ds/u-boot.lds
new file mode 100644 (file)
index 0000000..d6e22a7
--- /dev/null
@@ -0,0 +1,143 @@
+/*
+ * Copyright 2007-2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+PHDRS
+{
+  text PT_LOAD;
+  bss PT_LOAD;
+}
+
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)          }
+  .dynsym        : { *(.dynsym)                }
+  .dynstr        : { *(.dynstr)                }
+  .rel.text      : { *(.rel.text)              }
+  .rela.text     : { *(.rela.text)     }
+  .rel.data      : { *(.rel.data)              }
+  .rela.data     : { *(.rela.data)     }
+  .rel.rodata    : { *(.rel.rodata)    }
+  .rela.rodata   : { *(.rela.rodata)   }
+  .rel.got       : { *(.rel.got)               }
+  .rela.got      : { *(.rela.got)              }
+  .rel.ctors     : { *(.rel.ctors)     }
+  .rela.ctors    : { *(.rela.ctors)    }
+  .rel.dtors     : { *(.rel.dtors)     }
+  .rela.dtors    : { *(.rela.dtors)    }
+  .rel.bss       : { *(.rel.bss)               }
+  .rela.bss      : { *(.rela.bss)              }
+  .rel.plt       : { *(.rel.plt)               }
+  .rela.plt      : { *(.rela.plt)              }
+  .init          : { *(.init)  }
+  .plt : { *(.plt) }
+  .text      :
+  {
+    *(.text)
+    *(.fixup)
+    *(.got1)
+   } :text
+    _etext = .;
+    PROVIDE (etext = .);
+    .rodata    :
+   {
+    *(.eh_frame)
+    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+  } :text
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  .bootpg ADDR(.text) + 0x7f000 :
+  {
+    cpu/mpc85xx/start.o        (.bootpg)
+  } :text = 0xffff
+
+  .resetvec ADDR(.text) + 0x7fffc :
+  {
+    *(.resetvec)
+  } :text = 0xffff
+
+  . = ADDR(.text) + 0x80000;
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  } :bss
+
+  . = ALIGN(4);
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
new file mode 100644 (file)
index 0000000..a39ff26
--- /dev/null
@@ -0,0 +1,741 @@
+/*
+ * Copyright 2007-2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * p2020ds board configuration file
+ *
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE           1       /* BOOKE */
+#define CONFIG_E500            1       /* BOOKE e500 family */
+#define CONFIG_MPC85xx         1       /* MPC8540/60/55/41/48 */
+#define CONFIG_P2020           1
+#define CONFIG_P2020DS         1
+#define CONFIG_MP              1       /* support multiple processors */
+#define CONFIG_NUM_CPUS                2       /* Number of CPUs in the system */
+
+#define CONFIG_FSL_ELBC                1       /* Has Enhanced localbus controller */
+#define CONFIG_PCI             1       /* Enable PCI/PCIE */
+#define CONFIG_PCIE1           1       /* PCIE controler 1 (slot 1) */
+#define CONFIG_PCIE2           1       /* PCIE controler 2 (slot 2) */
+#define CONFIG_PCIE3           1       /* PCIE controler 3 (ULI bridge) */
+#define CONFIG_FSL_PCI_INIT    1       /* Use common FSL init code */
+#define CONFIG_FSL_PCIE_RESET  1       /* need PCIe reset errata */
+#define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
+
+#define CONFIG_FSL_LAW         1       /* Use common FSL init code */
+
+#define CONFIG_TSEC_ENET               /* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+
+/*
+ * When initializing flash, if we cannot find the manufacturer ID,
+ * assume this is the AMD flash associated with the CDS board.
+ * This allows booting from a promjet.
+ */
+#define CONFIG_ASSUME_AMD_FLASH
+
+#ifndef __ASSEMBLY__
+extern unsigned long calculate_board_sys_clk(unsigned long dummy);
+extern unsigned long calculate_board_ddr_clk(unsigned long dummy);
+/* extern unsigned long get_board_sys_clk(unsigned long dummy); */
+/* extern unsigned long get_board_ddr_clk(unsigned long dummy); */
+#endif
+#define CONFIG_SYS_CLK_FREQ    calculate_board_sys_clk(0) /* sysclk for MPC85xx */
+#define CONFIG_DDR_CLK_FREQ    calculate_board_ddr_clk(0) /* ddrclk for MPC85xx */
+#define CONFIG_ICS307_REFCLK_HZ        33333000  /* ICS307 clock chip ref freq */
+#define CONFIG_GET_CLK_FROM_ICS307       /* decode sysclk and ddrclk freq
+                                            from ICS307 instead of switches */
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE                        /* toggle L2 cache */
+#define CONFIG_BTB                     /* toggle branch predition */
+
+#define CONFIG_ENABLE_36BIT_PHYS       1
+
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_ADDR_MAP                        1
+#define CONFIG_SYS_NUM_ADDR_MAP                16      /* number of TLB1 entries */
+#endif
+
+#define CONFIG_SYS_MEMTEST_START       0x00000000      /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END         0x7fffffff
+#define CONFIG_PANIC_HANG      /* do not reset board on panic */
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default */
+#define CONFIG_SYS_CCSRBAR             0xffe00000      /* relocated CCSRBAR */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_CCSRBAR_PHYS                0xfffe00000ull  /* physical addr of CCSRBAR */
+#else
+#define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
+#endif
+#define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
+
+#define CONFIG_SYS_PCIE3_ADDR          (CONFIG_SYS_CCSRBAR+0x8000)
+#define CONFIG_SYS_PCIE2_ADDR          (CONFIG_SYS_CCSRBAR+0x9000)
+#define CONFIG_SYS_PCIE1_ADDR          (CONFIG_SYS_CCSRBAR+0xa000)
+
+/* DDR Setup */
+#define CONFIG_SYS_DDR_TLB_START 9
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_FSL_DDR3                1
+#undef CONFIG_FSL_DDR_INTERACTIVE
+
+// #define     CONFIG_DDR_ECC /* ECC will be enabled based on perf_mode environment variable */
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
+#define CONFIG_MEM_INIT_VALUE  0xDeadBeef
+
+#define CONFIG_SYS_DDR_SDRAM_BASE      0x00000000
+#define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
+
+#define CONFIG_NUM_DDR_CONTROLLERS     1
+#define CONFIG_DIMM_SLOTS_PER_CTLR     1
+#define CONFIG_CHIP_SELECTS_PER_CTRL   2
+
+/* I2C addresses of SPD EEPROMs */
+#define CONFIG_SYS_SPD_BUS_NUM         0       /* SPD EEPROM located on I2C bus 0 */
+#define SPD_EEPROM_ADDRESS1    0x51    /* CTLR 0 DIMM 0 */
+
+/* These are used when DDR doesn't use SPD.  */
+//#define CONFIG_SYS_SDRAM_SIZE                512             /* DDR is 512MB */
+#define CONFIG_SYS_SDRAM_SIZE          1024            /* DDR is 1GB */
+
+/* Default settings for "stable" mode */
+#define CONFIG_SYS_DDR_CS0_BNDS                0x0000003F
+#define CONFIG_SYS_DDR_CS1_BNDS                0x00000000
+#define CONFIG_SYS_DDR_CS0_CONFIG      0x80014202
+#define CONFIG_SYS_DDR_CS1_CONFIG      0x00000000
+#define CONFIG_SYS_DDR_TIMING_3                0x00020000
+#define CONFIG_SYS_DDR_TIMING_0                0x00330804
+#define CONFIG_SYS_DDR_TIMING_1                0x6f6b4846
+#define CONFIG_SYS_DDR_TIMING_2                0x0fa890d4
+#define CONFIG_SYS_DDR_MODE_1          0x00421422
+#define CONFIG_SYS_DDR_MODE_2          0x00000000
+#define CONFIG_SYS_DDR_MODE_CTRL       0x00000000
+#define CONFIG_SYS_DDR_INTERVAL                0x61800100
+#define CONFIG_SYS_DDR_DATA_INIT       0xdeadbeef
+#define CONFIG_SYS_DDR_CLK_CTRL                0x02000000
+#define CONFIG_SYS_DDR_TIMING_4                0x00220001
+#define CONFIG_SYS_DDR_TIMING_5                0x03402400
+#define CONFIG_SYS_DDR_ZQ_CNTL         0x89080600
+#define CONFIG_SYS_DDR_WRLVL_CNTL      0x8655A608
+#define CONFIG_SYS_DDR_CONTROL         0xE7000000 /* Type = DDR3: ECC enabled, No Interleaving */
+#define CONFIG_SYS_DDR_CONTROL2                0x24400011
+#define CONFIG_SYS_DDR_CDR1            0x00040000
+#define CONFIG_SYS_DDR_CDR2            0x00000000
+
+#define CONFIG_SYS_DDR_ERR_INT_EN      0x0000000d
+#define CONFIG_SYS_DDR_ERR_DIS         0x00000000
+#define CONFIG_SYS_DDR_SBE             0x00010000
+
+/* Settings that differ for "performance" mode */
+#define CONFIG_SYS_DDR_CS0_BNDS_PERF           0x0000007F /* Interleaving Enabled */
+#define CONFIG_SYS_DDR_CS1_BNDS_PERF           0x00000000 /* Interleaving Enabled */
+#define CONFIG_SYS_DDR_CS1_CONFIG_PERF 0x80014202
+#define CONFIG_SYS_DDR_TIMING_1_PERF           0x5d5b4543
+#define CONFIG_SYS_DDR_TIMING_2_PERF           0x0fa890ce
+#define CONFIG_SYS_DDR_CONTROL_PERF            0xC7004000 /* Type = DDR3: ECC disabled, cs0-cs1 interleaving */
+
+/*
+ * The following set of values were tested for DDR2
+ * with a DDR3 to DDR2 interposer
+ *
+#define CONFIG_SYS_DDR_TIMING_3                0x00000000
+#define CONFIG_SYS_DDR_TIMING_0                0x00260802
+#define CONFIG_SYS_DDR_TIMING_1                0x3935d322
+#define CONFIG_SYS_DDR_TIMING_2                0x14904cc8
+#define CONFIG_SYS_DDR_MODE_1          0x00480432
+#define CONFIG_SYS_DDR_MODE_2          0x00000000
+#define CONFIG_SYS_DDR_INTERVAL                0x06180100
+#define CONFIG_SYS_DDR_DATA_INIT       0xdeadbeef
+#define CONFIG_SYS_DDR_CLK_CTRL                0x03800000
+#define CONFIG_SYS_DDR_OCD_CTRL                0x00000000
+#define CONFIG_SYS_DDR_OCD_STATUS      0x00000000
+#define CONFIG_SYS_DDR_CONTROL         0xC3008000
+#define CONFIG_SYS_DDR_CONTROL2                0x04400010
+ *
+ */
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+/*
+ * Memory map
+ *
+ * 0x0000_0000 0x7fff_ffff     DDR                     2G Cacheable
+ * 0x8000_0000 0xbfff_ffff     PCI Express Mem         1G non-cacheable
+ * 0xc000_0000 0xdfff_ffff     PCI                     512M non-cacheable
+ * 0xe100_0000 0xe3ff_ffff     PCI IO range            4M non-cacheable
+ *
+ * Localbus cacheable (TBD)
+ * 0xXXXX_XXXX 0xXXXX_XXXX     SRAM                    YZ M Cacheable
+ *
+ * Localbus non-cacheable
+ * 0xe000_0000 0xe80f_ffff     Promjet/free            128M non-cacheable
+ * 0xe800_0000 0xefff_ffff     FLASH                   128M non-cacheable
+ * 0xffa0_0000 0xffaf_ffff     NAND                    1M non-cacheable
+ * 0xffdf_0000 0xffdf_7fff     PIXIS                   32K non-cacheable TLB0
+ * 0xffd0_0000 0xffd0_3fff     L1 for stack            16K Cacheable TLB0
+ * 0xffe0_0000 0xffef_ffff     CCSR                    1M non-cacheable
+ */
+
+/*
+ * Local Bus Definitions
+ */
+#define CONFIG_SYS_FLASH_BASE          0xe0000000      /* start of FLASH 128M */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_FLASH_BASE_PHYS     0xfe0000000ull
+#else
+#define CONFIG_SYS_FLASH_BASE_PHYS     CONFIG_SYS_FLASH_BASE
+#endif
+
+#define CONFIG_FLASH_BR_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | BR_PS_16 | BR_V)
+#define CONFIG_FLASH_OR_PRELIM 0xf8000ff7
+
+#define CONFIG_SYS_BR1_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
+#define CONFIG_SYS_OR1_PRELIM  0xf8000ff7
+
+#define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
+#define CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
+
+#define CONFIG_SYS_MAX_FLASH_BANKS     2               /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT      1024            /* sectors per device */
+#undef CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT    60000           /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT    500             /* Flash Write Timeout (ms) */
+
+#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE       /* start of monitor */
+
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
+
+#define CONFIG_BOARD_EARLY_INIT_R      /* call board_early_init_r function */
+
+#define CONFIG_FSL_PIXIS       1       /* use common PIXIS code */
+#define PIXIS_BASE     0xffdf0000      /* PIXIS registers */
+#ifdef CONFIG_PHYS_64BIT
+#define PIXIS_BASE_PHYS        0xfffdf0000ull
+#else
+#define PIXIS_BASE_PHYS        PIXIS_BASE
+#endif
+
+#define CONFIG_SYS_BR3_PRELIM  (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
+#define CONFIG_SYS_OR3_PRELIM          0xffffeff7      /* 32KB but only 4k mapped */
+
+#define PIXIS_ID               0x0     /* Board ID at offset 0 */
+#define PIXIS_VER              0x1     /* Board version at offset 1 */
+#define PIXIS_PVER             0x2     /* PIXIS FPGA version at offset 2 */
+#define PIXIS_CSR              0x3     /* PIXIS General control/status register */
+#define PIXIS_RST              0x4     /* PIXIS Reset Control register */
+#define PIXIS_PWR              0x5     /* PIXIS Power status register */
+#define PIXIS_AUX              0x6     /* Auxiliary 1 register */
+#define PIXIS_SPD              0x7     /* Register for SYSCLK speed */
+#define PIXIS_AUX2             0x8     /* Auxiliary 2 register */
+#define PIXIS_VCTL             0x10    /* VELA Control Register */
+#define PIXIS_VSTAT            0x11    /* VELA Status Register */
+#define PIXIS_VCFGEN0          0x12    /* VELA Config Enable 0 */
+#define PIXIS_VCFGEN1          0x13    /* VELA Config Enable 1 */
+#define PIXIS_VCORE0           0x14    /* VELA VCORE0 Register */
+#define PIXIS_VBOOT            0x16    /* VELA VBOOT Register */
+#define PIXIS_VSPEED0          0x17    /* VELA VSpeed 0 */
+#define PIXIS_VSPEED1          0x18    /* VELA VSpeed 1 */
+#define PIXIS_VSPEED2          0x19    /* VELA VSpeed 2 */
+#define PIXIS_VSYSCLK0         0x19    /* VELA SYSCLK0 Register */
+#define PIXIS_VSYSCLK1         0x1A    /* VELA SYSCLK1 Register */
+#define PIXIS_VSYSCLK2         0x1B    /* VELA SYSCLK2 Register */
+#define PIXIS_VDDRCLK0         0x1C    /* VELA DDRCLK0 Register */
+#define PIXIS_VDDRCLK1         0x1D    /* VELA DDRCLK1 Register */
+#define PIXIS_VDDRCLK2         0x1E    /* VELA DDRCLK2 Register */
+
+#define PIXIS_VWATCH           0x24    /* Watchdog Register */
+#define PIXIS_LED              0x25    /* LED Register */
+
+/* old pixis referenced names */
+#define PIXIS_VCLKH            0x19    /* VELA VCLKH register */
+#define PIXIS_VCLKL            0x1A    /* VELA VCLKL register */
+#define CONFIG_SYS_PIXIS_VBOOT_MASK    0xc0
+#define PIXIS_VSPEED2_TSEC1SER 0x8
+#define PIXIS_VSPEED2_TSEC2SER 0x4
+#define PIXIS_VSPEED2_TSEC3SER 0x2
+#define PIXIS_VSPEED2_TSEC4SER 0x1
+#define PIXIS_VCFGEN1_TSEC1SER 0x20
+#define PIXIS_VCFGEN1_TSEC2SER 0x20
+#define PIXIS_VCFGEN1_TSEC3SER 0x20
+#define PIXIS_VCFGEN1_TSEC4SER 0x20
+#define PIXIS_VSPEED2_MASK     (PIXIS_VSPEED2_TSEC1SER \
+                                       | PIXIS_VSPEED2_TSEC2SER \
+                                       | PIXIS_VSPEED2_TSEC3SER \
+                                       | PIXIS_VSPEED2_TSEC4SER)
+#define PIXIS_VCFGEN1_MASK     (PIXIS_VCFGEN1_TSEC1SER \
+                                       | PIXIS_VCFGEN1_TSEC2SER \
+                                       | PIXIS_VCFGEN1_TSEC3SER \
+                                       | PIXIS_VCFGEN1_TSEC4SER)
+
+#define CONFIG_SYS_INIT_RAM_LOCK       1
+#define CONFIG_SYS_INIT_RAM_ADDR       0xffd00000      /* Initial L1 address */
+#define CONFIG_SYS_INIT_RAM_END        0x00004000      /* End of used area in RAM */
+
+#define CONFIG_SYS_GBL_DATA_SIZE       128     /* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_LEN         (256 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN          (1024 * 1024)   /* Reserved for malloc */
+
+#define CONFIG_SYS_NAND_BASE           0xffa00000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_NAND_BASE_PHYS      0xfffa00000ull
+#else
+#define CONFIG_SYS_NAND_BASE_PHYS      CONFIG_SYS_NAND_BASE
+#endif
+#define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE,\
+                               CONFIG_SYS_NAND_BASE + 0x40000, \
+                               CONFIG_SYS_NAND_BASE + 0x80000,\
+                               CONFIG_SYS_NAND_BASE + 0xC0000}
+#define CONFIG_SYS_MAX_NAND_DEVICE     4
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND                        1
+#define CONFIG_NAND_FSL_ELBC           1
+#define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
+
+/* NAND flash config */
+#define CONFIG_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+                               | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
+                               | BR_PS_8               /* Port Size = 8bit */ \
+                               | BR_MS_FCM             /* MSEL = FCM */ \
+                               | BR_V)                 /* valid */
+#define CONFIG_NAND_OR_PRELIM  (0xFFFC0000             /* length 256K */ \
+                               | OR_FCM_PGS            /* Large Page*/ \
+                               | OR_FCM_CSCT \
+                               | OR_FCM_CST \
+                               | OR_FCM_CHT \
+                               | OR_FCM_SCY_1 \
+                               | OR_FCM_TRLX \
+                               | OR_FCM_EHTR)
+
+#define CONFIG_SYS_BR0_PRELIM  CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
+#define CONFIG_SYS_OR0_PRELIM  CONFIG_FLASH_OR_PRELIM  /* NOR Options */
+#define CONFIG_SYS_BR2_PRELIM  CONFIG_NAND_BR_PRELIM  /* NAND Base Address */
+#define CONFIG_SYS_OR2_PRELIM  CONFIG_NAND_OR_PRELIM  /* NAND Options */
+
+#define CONFIG_SYS_BR4_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x40000))\
+                               | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
+                               | BR_PS_8               /* Port Size = 8bit */ \
+                               | BR_MS_FCM             /* MSEL = FCM */ \
+                               | BR_V)                 /* valid */
+#define CONFIG_SYS_OR4_PRELIM  CONFIG_NAND_OR_PRELIM   /* NAND Options */
+#define CONFIG_SYS_BR5_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x80000))\
+                               | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
+                               | BR_PS_8               /* Port Size = 8bit */ \
+                               | BR_MS_FCM             /* MSEL = FCM */ \
+                               | BR_V)                 /* valid */
+#define CONFIG_SYS_OR5_PRELIM  CONFIG_NAND_OR_PRELIM   /* NAND Options */
+
+#define CONFIG_SYS_BR6_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0xc0000))\
+                               | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
+                               | BR_PS_8               /* Port Size = 8bit */ \
+                               | BR_MS_FCM             /* MSEL = FCM */ \
+                               | BR_V)                 /* valid */
+#define CONFIG_SYS_OR6_PRELIM  CONFIG_NAND_OR_PRELIM   /* NAND Options */
+
+/* Serial Port - controlled on board with jumper J8
+ * open - index 2
+ * shorted - index 1
+ */
+#define CONFIG_CONS_INDEX      1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
+
+#define CONFIG_SYS_BAUDRATE_TABLE      \
+       {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CONFIG_SYS_HUSH_PARSER
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#endif
+
+/*
+ * Pass open firmware flat tree
+ */
+#define CONFIG_OF_LIBFDT               1
+#define CONFIG_OF_BOARD_SETUP          1
+#define CONFIG_OF_STDOUT_VIA_ALIAS     1
+
+#define CONFIG_SYS_64BIT_VSPRINTF      1
+#define CONFIG_SYS_64BIT_STRTOUL       1
+
+/* new uImage format support */
+#define CONFIG_FIT             1
+#define CONFIG_FIT_VERBOSE     1 /* enable fit_format_{error,warning}() */
+
+/* I2C */
+#define CONFIG_FSL_I2C         /* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C                /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C         /* I2C bit-banged */
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+#define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed and slave address */
+#define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
+#define CONFIG_SYS_I2C_SLAVE           0x7F
+#define CONFIG_SYS_I2C_NOPROBES        {{0,0x29}}/* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET          0x3000
+#define CONFIG_SYS_I2C2_OFFSET         0x3100
+
+/*
+ * I2C2 EEPROM
+ */
+#define CONFIG_ID_EEPROM
+#ifdef CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#endif
+#define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_BUS_NUM      0
+
+/*
+ * General PCI
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+
+/* controller 3, Slot 1, tgtid 3, Base address b000 */
+#define CONFIG_SYS_PCIE3_MEM_VIRT      0x80000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE3_MEM_BUS       0xc0000000
+#define CONFIG_SYS_PCIE3_MEM_PHYS      0xc00000000ull
+#else
+#define CONFIG_SYS_PCIE3_MEM_BUS       0x80000000
+#define CONFIG_SYS_PCIE3_MEM_PHYS      0x80000000
+#endif
+#define CONFIG_SYS_PCIE3_MEM_SIZE      0x20000000      /* 512M */
+#define CONFIG_SYS_PCIE3_IO_VIRT       0xffc00000
+#define CONFIG_SYS_PCIE3_IO_BUS                0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE3_IO_PHYS       0xfffc00000ull
+#else
+#define CONFIG_SYS_PCIE3_IO_PHYS       0xffc00000
+#endif
+#define CONFIG_SYS_PCIE3_IO_SIZE       0x00010000      /* 64k */
+
+/* controller 2, direct to uli, tgtid 2, Base address 9000 */
+#define CONFIG_SYS_PCIE2_MEM_VIRT      0xa0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE2_MEM_BUS       0xc0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS      0xc20000000ull
+#else
+#define CONFIG_SYS_PCIE2_MEM_BUS       0xa0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS      0xa0000000
+#endif
+#define CONFIG_SYS_PCIE2_MEM_SIZE      0x20000000      /* 512M */
+#define CONFIG_SYS_PCIE2_IO_VIRT       0xffc10000
+#define CONFIG_SYS_PCIE2_IO_BUS                0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE2_IO_PHYS       0xfffc10000ull
+#else
+#define CONFIG_SYS_PCIE2_IO_PHYS       0xffc10000
+#endif
+#define CONFIG_SYS_PCIE2_IO_SIZE       0x00010000      /* 64k */
+
+/* controller 1, Slot 2, tgtid 1, Base address a000 */
+#define CONFIG_SYS_PCIE1_MEM_VIRT      0xc0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_MEM_BUS       0xc0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS      0xc40000000ull
+#else
+#define CONFIG_SYS_PCIE1_MEM_BUS       0xc0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS      0xc0000000
+#endif
+#define CONFIG_SYS_PCIE1_MEM_SIZE      0x20000000      /* 512M */
+#define CONFIG_SYS_PCIE1_IO_VIRT       0xffc20000
+#define CONFIG_SYS_PCIE1_IO_BUS                0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_IO_PHYS       0xfffc20000ull
+#else
+#define CONFIG_SYS_PCIE1_IO_PHYS       0xffc20000
+#endif
+#define CONFIG_SYS_PCIE1_IO_SIZE       0x00010000      /* 64k */
+
+#if defined(CONFIG_PCI)
+
+/*PCIE video card used*/
+#define VIDEO_IO_OFFSET                CONFIG_SYS_PCIE1_IO_VIRT
+
+/* video */
+#define CONFIG_VIDEO
+
+#if defined(CONFIG_VIDEO)
+#define CONFIG_BIOSEMU
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_ATI_RADEON_FB
+#define CONFIG_VIDEO_LOGO
+/*#define CONFIG_CONSOLE_CURSOR*/
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
+#endif
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP                 /* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_TULIP
+#define CONFIG_RTL8139
+
+#ifdef CONFIG_RTL8139
+/* This macro is used by RTL8139 but not defined in PPC architecture */
+#define KSEG1ADDR(x)           (x)
+#define _IO_BASE       0x00000000
+#endif
+
+#ifndef CONFIG_PCI_PNP
+       #define PCI_ENET0_IOADDR        CONFIG_SYS_PCIE3_IO_BUS
+       #define PCI_ENET0_MEMADDR       CONFIG_SYS_PCIE3_IO_BUS
+       #define PCI_IDSEL_NUMBER        0x11    /* IDSEL = AD11 */
+#endif
+
+#define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SCSI_AHCI
+
+#ifdef CONFIG_SCSI_AHCI
+#define CONFIG_SATA_ULI5288
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID    4
+#define CONFIG_SYS_SCSI_MAX_LUN        1
+#define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN)
+#define CONFIG_SYS_SCSI_MAXDEVICE      CONFIG_SYS_SCSI_MAX_DEVICE
+#endif /* SCSI */
+
+#endif /* CONFIG_PCI */
+
+
+#if defined(CONFIG_TSEC_ENET)
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI       1
+#endif
+
+#define CONFIG_MII             1       /* MII PHY management */
+#define CONFIG_MII_DEFAULT_TSEC        1       /* Allow unregistered phys */
+#define CONFIG_TSEC1   1
+#define CONFIG_TSEC1_NAME      "eTSEC1"
+#define CONFIG_TSEC2   1
+#define CONFIG_TSEC2_NAME      "eTSEC2"
+#define CONFIG_TSEC3   1
+#define CONFIG_TSEC3_NAME      "eTSEC3"
+
+#define CONFIG_PIXIS_SGMII_CMD
+#define CONFIG_FSL_SGMII_RISER 1
+#define SGMII_RISER_PHY_OFFSET 0x1b
+
+#ifdef CONFIG_FSL_SGMII_RISER
+#define CONFIG_SYS_TBIPA_VALUE         0x10 /* avoid conflict with eTSEC4 paddr */
+#endif
+
+#define TSEC1_PHY_ADDR         0
+#define TSEC2_PHY_ADDR         1
+#define TSEC3_PHY_ADDR         2
+
+#define TSEC1_FLAGS            (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC2_FLAGS            (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC3_FLAGS            (TSEC_GIGABIT | TSEC_REDUCED)
+
+#define TSEC1_PHYIDX           0
+#define TSEC2_PHYIDX           0
+#define TSEC3_PHYIDX           0
+
+#define CONFIG_ETHPRIME                "eTSEC1"
+
+#define CONFIG_PHY_GIGE                1       /* Include GbE speed/duplex detection */
+#endif /* CONFIG_TSEC_ENET */
+
+/*
+ * Environment
+ */
+#define CONFIG_ENV_IS_IN_FLASH 1
+#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
+#define CONFIG_ENV_ADDR                0xfff80000
+#else
+#define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#endif
+#define CONFIG_ENV_SIZE                0x2000
+#define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
+
+#define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_SETEXPR
+
+#if defined(CONFIG_PCI)
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_SCSI
+#define CONFIG_CMD_EXT2
+#endif
+
+#undef CONFIG_WATCHDOG                 /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP                    /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING         /* Command-line editing */
+#define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
+#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size */
+#else
+#define CONFIG_SYS_CBSIZE      256             /* Console I/O Buffer Size */
+#endif
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS     16              /* max number of command args */
+#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ          1000            /* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ   (8 << 20)       /* Initial Memory map for Linux*/
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM  0x02            /* Software reboot */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+/* The mac addresses for all ethernet interface */
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_HAS_ETH0
+#define CONFIG_ETHADDR 00:E0:0C:02:00:FD
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR        00:E0:0C:02:01:FD
+#define CONFIG_HAS_ETH2
+#define CONFIG_ETH2ADDR        00:E0:0C:02:02:FD
+#define CONFIG_HAS_ETH3
+#define CONFIG_ETH3ADDR        00:E0:0C:02:03:FD
+#endif
+
+#define CONFIG_IPADDR          192.168.1.254
+
+#define CONFIG_HOSTNAME                unknown
+#define CONFIG_ROOTPATH                /opt/nfsroot
+#define CONFIG_BOOTFILE                uImage
+#define CONFIG_UBOOTPATH       u-boot.bin      /* U-Boot image on TFTP server */
+
+#define CONFIG_SERVERIP                192.168.1.1
+#define CONFIG_GATEWAYIP       192.168.1.1
+#define CONFIG_NETMASK         255.255.255.0
+
+/* default location for tftp and bootm */
+#define CONFIG_LOADADDR                1000000
+
+#define CONFIG_BOOTDELAY 10    /* -1 disables auto-boot */
+#undef  CONFIG_BOOTARGS                /* the boot command will set bootargs */
+
+#define CONFIG_BAUDRATE        115200
+
+#define        CONFIG_EXTRA_ENV_SETTINGS                               \
+ "perf_mode=stable\0"                  \
+ "memctl_intlv_ctl=2\0"                                                \
+ "netdev=eth0\0"                                               \
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                                \
+ "tftpflash=tftpboot $loadaddr $uboot; "                       \
+       "protect off " MK_STR(TEXT_BASE) " +$filesize; "        \
+       "erase " MK_STR(TEXT_BASE) " +$filesize; "              \
+       "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "      \
+       "protect on " MK_STR(TEXT_BASE) " +$filesize; "         \
+       "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"     \
+ "consoledev=ttyS0\0"                          \
+ "ramdiskaddr=2000000\0"                       \
+ "ramdiskfile=p2020ds/ramdisk.uboot\0"         \
+ "fdtaddr=c00000\0"                            \
+ "fdtfile=p2020ds/p2020ds.dtb\0"               \
+ "bdev=sda3\0"
+
+#define CONFIG_HDBOOT                          \
+ "setenv bootargs root=/dev/$bdev rw "         \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;"                   \
+ "tftp $fdtaddr $fdtfile;"                     \
+ "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_NFSBOOTCOMMAND          \
+ "setenv bootargs root=/dev/nfs rw "   \
+ "nfsroot=$serverip:$rootpath "                \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;"           \
+ "tftp $fdtaddr $fdtfile;"             \
+ "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND          \
+ "setenv bootargs root=/dev/ram rw "   \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;"     \
+ "tftp $loadaddr $bootfile;"           \
+ "tftp $fdtaddr $fdtfile;"             \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_BOOTCOMMAND             CONFIG_HDBOOT
+
+#endif /* __CONFIG_H */