Migrate the CONFIG_SYS_ALT_MEMTEST option to Kconfig.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
[trini: Re-run migration after also including CMD_MEMTEST]
Signed-off-by: Tom Rini <trini@konsulko.com>
Begin and End addresses of the area used by the
simple memory test.
-- CONFIG_SYS_ALT_MEMTEST:
- Enable an alternate, more extensive memory test.
-
- CONFIG_SYS_MEMTEST_SCRATCH:
Scratch address used by the alternate memory test
You only need to set this if address zero isn't writeable
help
Simple RAM read/write test.
+if CMD_MEMTEST
+
+config SYS_ALT_MEMTEST
+ bool "Alternative test"
+ help
+ Use a more complete alternative memory test.
+
+endif
+
config CMD_MX_CYCLIC
bool "mdc, mwc"
help
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_BOOTDELAY=10
CONFIG_HUSH_PARSER=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
# CONFIG_CMD_IMPORTENV is not set
# CONFIG_CMD_EDITENV is not set
# CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_MEMTEST=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
# CONFIG_CMD_IMPORTENV is not set
# CONFIG_CMD_EDITENV is not set
# CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_MEMTEST=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_ASKENV=y
CONFIG_CRC32_VERIFY=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_DFU=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_ASKENV=y
CONFIG_CRC32_VERIFY=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_DFU=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_ASKENV=y
CONFIG_CRC32_VERIFY=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_DFU=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_ASKENV=y
CONFIG_CRC32_VERIFY=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_DFU=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_ASKENV=y
CONFIG_CRC32_VERIFY=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_DFU=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_SF=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
+CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
# CONFIG_USE_BOOTCOMMAND is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_MEMTEST=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT"
# CONFIG_USE_BOOTCOMMAND is not set
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_CMD_MEMTEST=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT"
# CONFIG_USE_BOOTCOMMAND is not set
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_CMD_MEMTEST=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_MEMTEST=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_CMD_MEMTEST=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT"
# CONFIG_USE_BOOTCOMMAND is not set
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_CMD_MEMTEST=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT"
# CONFIG_USE_BOOTCOMMAND is not set
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_CMD_MEMTEST=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_CMD_MEMTEST=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_CMD_MEMTEST=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7ulp_evk/imximage.cfg"
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk"
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7ulp_evk/imximage.cfg"
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_BOOTARGS="console=ttyLF0 root=/dev/ram rw"
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_MEMTEST=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_OF_LIBFDT=y
CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_CMD_IMLS=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_FPGAD=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_CMD_IMLS=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_FPGAD=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_CMD_IMLS=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_FPGAD=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_CMD_IMLS=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_FPGAD=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_SPL_STACK_R=y
CONFIG_SYS_PROMPT="zynq-uboot> "
CONFIG_CMD_THOR_DOWNLOAD=y
+CONFIG_CMD_MEMTEST=y
CONFIG_CMD_DFU=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_SPL_STACK_R=y
CONFIG_SYS_PROMPT="zynq-uboot> "
CONFIG_CMD_THOR_DOWNLOAD=y
+CONFIG_CMD_MEMTEST=y
CONFIG_CMD_DFU=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_SPL_STACK_R=y
CONFIG_SYS_PROMPT="zynq-uboot> "
CONFIG_CMD_THOR_DOWNLOAD=y
+CONFIG_CMD_MEMTEST=y
CONFIG_CMD_DFU=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_MEMTEST=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_NAND=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_CMD_THOR_DOWNLOAD=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_CLK=y
CONFIG_CMD_DFU=y
# CONFIG_CMD_FLASH is not set
CONFIG_FASTBOOT_FLASH=y
CONFIG_CMD_THOR_DOWNLOAD=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_CLK=y
CONFIG_CMD_DFU=y
# CONFIG_CMD_FLASH is not set
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SYS_PROMPT="ZynqMP> "
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_CLK=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_FPGA_LOADBP=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SYS_PROMPT="ZynqMP> "
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_CLK=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_FPGA_LOADBP=y
CONFIG_CMD_THOR_DOWNLOAD=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_CLK=y
CONFIG_CMD_DFU=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_THOR_DOWNLOAD=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_CLK=y
CONFIG_CMD_DFU=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_THOR_DOWNLOAD=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_CLK=y
CONFIG_CMD_DFU=y
# CONFIG_CMD_FLASH is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_EXT_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_EXT_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
#endif
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00400000
-#define CONFIG_SYS_ALT_MEMTEST
/*
* Config the L3 Cache as L3 SRAM
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
/* Enable alternate, more extensive, memory test */
-#undef CONFIG_SYS_ALT_MEMTEST
/* Scratch address used by the alternate memory test */
#undef CONFIG_SYS_MEMTEST_SCRATCH
#define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00400000
-#define CONFIG_SYS_ALT_MEMTEST
/*
* Config the L3 Cache as L3 SRAM
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00400000
-#define CONFIG_SYS_ALT_MEMTEST
/*
* Config the L3 Cache as L3 SRAM
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00400000
-#define CONFIG_SYS_ALT_MEMTEST
/*
* Config the L3 Cache as L3 SRAM
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00400000
-#define CONFIG_SYS_ALT_MEMTEST
/*
* Config the L3 Cache as L3 SRAM
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00400000
-#define CONFIG_SYS_ALT_MEMTEST
/*
* Config the L3 Cache as L3 SRAM
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00400000
-#define CONFIG_SYS_ALT_MEMTEST
#ifdef CONFIG_MTD_NOR_FLASH
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00400000
-#define CONFIG_SYS_ALT_MEMTEST
/*
* Config the L3 Cache as L3 SRAM
*/
#define CONFIG_SYS_MEMTEST_START 0x80100000
#define CONFIG_SYS_MEMTEST_END 0x83f00000
-#define CONFIG_CMD_MEMTEST
#endif /* __CONFIG_H */
*/
#define CONFIG_SYS_MEMTEST_START 0x80100000
#define CONFIG_SYS_MEMTEST_END 0x83f00000
-#define CONFIG_CMD_MEMTEST
#endif /* __CONFIG_H */
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
/* Enable alternate, more extensive, memory test */
-#undef CONFIG_SYS_ALT_MEMTEST
/* Scratch address used by the alternate memory test */
#undef CONFIG_SYS_MEMTEST_SCRATCH
#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE)
/* Enable alternate, more extensive, memory test */
-#undef CONFIG_SYS_ALT_MEMTEST
/* Scratch address used by the alternate memory test */
#undef CONFIG_SYS_MEMTEST_SCRATCH
#undef CONFIG_SYS_MAXARGS
#define CONFIG_SYS_MAXARGS 48
-#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x10000000
#define CONFIG_SYS_MEMTEST_END 0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
#define CONFIG_SYS_MEMTEST_START (ARMADILLO_800EVA_SDRAM_BASE)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
504 * 1024 * 1024)
-#undef CONFIG_SYS_ALT_MEMTEST
#undef CONFIG_SYS_MEMTEST_SCRATCH
#undef CONFIG_SYS_LOADS_BAUD_CHANGE
#define CONFIG_SYS_MEMTEST_START (RCAR_GEN2_SDRAM_BASE)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 504 * 1024 * 1024)
-#undef CONFIG_SYS_ALT_MEMTEST
#undef CONFIG_SYS_MEMTEST_SCRATCH
#undef CONFIG_SYS_LOADS_BAUD_CHANGE
#define CONFIG_PCI_SCAN_SHOW
#endif
-#define CONFIG_SYS_ALT_MEMTEST
-
/* Keep device tree and initrd in lower memory so the kernel can access them */
#define RELOCATION_LIMITS_ENV_SETTINGS \
"fdt_high=0x10000000\0" \
#undef CONFIG_SYS_MAXARGS
#define CONFIG_SYS_MAXARGS 48
-#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x10000000
#define CONFIG_SYS_MEMTEST_END 0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
#define CONFIG_PCI_SCAN_SHOW
#endif
-#define CONFIG_SYS_ALT_MEMTEST
-
/*
* Software (bit-bang) MII driver configuration
*/
#define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00400000
-#define CONFIG_SYS_ALT_MEMTEST
/*
* Config the L3 Cache as L3 SRAM
#undef CONFIG_POST
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00400000
-#define CONFIG_SYS_ALT_MEMTEST
/*
* Config the L3 Cache as L3 SRAM
#define CONFIG_PHY_MARVELL /* there is a marvell phy */
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
-#define CONFIG_SYS_ALT_MEMTEST
-
/*
* mv-common.h should be defined after CMD configs since it used them
* to enable certain macros
#define CONFIG_SYS_NAND_USE_FLASH_BBT
#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_SYS_ALT_MEMTEST
-
/* Keep device tree and initrd in lower memory so the kernel can access them */
#define CONFIG_EXTRA_ENV_SETTINGS \
"fdt_high=0x10000000\0" \
#define CONFIG_PCI_SCAN_SHOW
#endif
-#define CONFIG_SYS_ALT_MEMTEST
-
/* Keep device tree and initrd in lower memory so the kernel can access them */
#define CONFIG_EXTRA_ENV_SETTINGS \
"fdt_high=0x10000000\0" \
#define CONFIG_PHY_MARVELL /* there is a marvell phy */
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
-#define CONFIG_SYS_ALT_MEMTEST
-
/* SATA support */
#define CONFIG_SYS_SATA_MAX_DEVICE 2
#define CONFIG_LBA48
#define CONFIG_PHY_MARVELL /* there is a marvell phy */
#define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII
-#define CONFIG_SYS_ALT_MEMTEST
-
/* PCIe support */
#ifndef CONFIG_SPL_BUILD
#define CONFIG_PCI_MVEBU
#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 200 * 1024 * 1024)
/* Enable alternate, more extensive, memory test */
-#undef CONFIG_SYS_ALT_MEMTEST
/* Scratch address used by the alternate memory test */
#undef CONFIG_SYS_MEMTEST_SCRATCH
#define CONFIG_ARP_TIMEOUT 200UL
-#define CONFIG_CMD_MEMTEST
-
#define CONFIG_SYS_MEMTEST_START 0x10000000
#define CONFIG_SYS_MEMTEST_END 0x10800000
#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
#define CONFIG_HUSH_INIT_VAR
-#define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */
-
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
#define CONFIG_LOADS_ECHO
#define CONFIG_SYS_MEMTEST_START (KZM_SDRAM_BASE)
#define CONFIG_SYS_MEMTEST_END \
(CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
-#undef CONFIG_SYS_ALT_MEMTEST
#undef CONFIG_SYS_MEMTEST_SCRATCH
#undef CONFIG_SYS_LOADS_BAUD_CHANGE
#define CONFIG_NR_DRAM_BANKS 2
#define CONFIG_SYS_SDRAM_SIZE 0x40000000
#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END 0x9fffffff
#define CONFIG_NET_MULTI
#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END 0x9fffffff
#define CONFIG_SYS_SDRAM_SIZE 0x20000000
#define CONFIG_CHIP_SELECTS_PER_CTRL 1
#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END 0x9fffffff
#define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd"
#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END 0x9fffffff
#define CONFIG_NR_DRAM_BANKS 2
#define CONFIG_SYS_SDRAM_SIZE 0x40000000
#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END 0x9fffffff
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END 0x9fffffff
#define CONFIG_NR_DRAM_BANKS 2
#define CONFIG_SYS_SDRAM_SIZE 0x40000000
#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END 0x9fffffff
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END 0x9fffffff
#endif
#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END 0x9fffffff
#endif
#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END 0x9fffffff
#define CONFIG_PHY_MARVELL /* there is a marvell phy */
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
-#define CONFIG_SYS_ALT_MEMTEST
-
/*
* mv-common.h should be defined after CMD configs since it used them
* to enable certain macros
#define CONFIG_SYS_MEMTEST_START (MS7722SE_SDRAM_BASE)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
-#undef CONFIG_SYS_ALT_MEMTEST /* Enable alternate, more extensive, memory test */
#undef CONFIG_SYS_MEMTEST_SCRATCH /* Scratch address used by the alternate memory test */
#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* Enable temporary baudrate change while serial download */
#define CONFIG_RTC_MV
#endif /* CONFIG_CMD_DATE */
-#define CONFIG_SYS_ALT_MEMTEST
-
#endif /* _CONFIG_MARVELL_PLUG_H */
#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
-#define CONFIG_SYS_ALT_MEMTEST
-
/* End of 16M scrubbed by training in bootrom */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000)
#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
-#define CONFIG_SYS_ALT_MEMTEST
-
/* End of 16M scrubbed by training in bootrom */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000)
#define CONFIG_LOADADDR 0x60800000
-#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_END 0x9E000000
#define CONFIG_EXTRA_ENV_SETTINGS \
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
#endif
-#define CONFIG_SYS_ALT_MEMTEST
-
/*
* PCI express
*/
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00400000
-#define CONFIG_SYS_ALT_MEMTEST
/* Needed to fill the ccsrbar pointer */
#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 100 * 1024 * 1024)
/* Enable alternate, more extensive, memory test */
-#undef CONFIG_SYS_ALT_MEMTEST
/* Scratch address used by the alternate memory test */
#undef CONFIG_SYS_MEMTEST_SCRATCH
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_PROMPT "=> "
-#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START (DDR_BASE_ADDR)
#define CONFIG_SYS_MEMTEST_END (DDR_BASE_ADDR + 0x7C00000)
#define CONFIG_SYS_MEMTEST_START (SH7752EVB_SDRAM_BASE)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
480 * 1024 * 1024)
-#undef CONFIG_SYS_ALT_MEMTEST
#undef CONFIG_SYS_MEMTEST_SCRATCH
#undef CONFIG_SYS_LOADS_BAUD_CHANGE
#define CONFIG_SYS_MEMTEST_START (SH7753EVB_SDRAM_BASE)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
480 * 1024 * 1024)
-#undef CONFIG_SYS_ALT_MEMTEST
#undef CONFIG_SYS_MEMTEST_SCRATCH
#undef CONFIG_SYS_LOADS_BAUD_CHANGE
#define CONFIG_SYS_MEMTEST_START (SH7757LCR_SDRAM_BASE)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
224 * 1024 * 1024)
-#undef CONFIG_SYS_ALT_MEMTEST
#undef CONFIG_SYS_MEMTEST_SCRATCH
#undef CONFIG_SYS_LOADS_BAUD_CHANGE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
(SH7785LCR_SDRAM_SIZE) - \
4 * 1024 * 1024)
-#undef CONFIG_SYS_ALT_MEMTEST
#undef CONFIG_SYS_MEMTEST_SCRATCH
#undef CONFIG_SYS_LOADS_BAUD_CHANGE
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR
-#define CONFIG_SYS_ALT_MEMTEST
-
/*
* System Clock Setup
*/
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00400000
-#define CONFIG_SYS_ALT_MEMTEST
/*
* Config the L3 Cache as L3 SRAM
/* turn on command-line edit/hist/auto */
-#define CONFIG_SYS_ALT_MEMTEST 1
#define CONFIG_SYS_MEMTEST_START (0x82000000) /* memtest */
/* defaults */
#define CONFIG_SYS_MEMTEST_END (0x83FFFFFF) /* 64MB */
#define CONFIG_PHY_MARVELL /* there is a marvell phy */
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
-#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_PREBOOT
/* Keep device tree and initrd in lower memory so the kernel can access them */
/* FPGA commands that we don't use */
/* Extras */
-#define CONFIG_CMD_MEMTEST
#undef CONFIG_SYS_MEMTEST_START
#define CONFIG_SYS_MEMTEST_START 0
#undef CONFIG_SYS_MEMTEST_END
*/
#define CONFIG_SYS_MEMTEST_START 0x80100000
#define CONFIG_SYS_MEMTEST_END 0x83f00000
-#define CONFIG_CMD_MEMTEST
#define CONFIG_CMD_MII
#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
-#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_SYS_MEMTEST_SCRATCH 0x81000000
#endif /* __CONFIG_H */
#define CONFIG_PCI_SCAN_SHOW
#endif
-#define CONFIG_SYS_ALT_MEMTEST
-
/* Keep device tree and initrd in lower memory so the kernel can access them */
#define RELOCATION_LIMITS_ENV_SETTINGS \
"fdt_high=0x10000000\0" \
#define CONFIG_SYS_MEMTEST_START 0x21000000
#define CONFIG_SYS_MEMTEST_END 0x22000000
-#define CONFIG_SYS_ALT_MEMTEST
/* NAND flash */
#define CONFIG_NAND_ATMEL
#define GICD_BASE 0xF9010000
#define GICC_BASE 0xF9020000
-#define CONFIG_SYS_ALT_MEMTEST
#ifndef CONFIG_SYS_MEMTEST_SCRATCH
# define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
#endif
/*
* Diagnostics
*/
-#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x10000000
#define CONFIG_SYS_MEMTEST_END 0x20000000
#define CONFIG_POST (CONFIG_SYS_POST_MEMORY |\
/*
* Diagnostics
*/
-#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x10000000
#define CONFIG_SYS_MEMTEST_END 0x20000000
#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \
/*
* Diagnostics
*/
-#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x10000000
#define CONFIG_SYS_MEMTEST_END 0x20000000
#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \
/*
* Diagnostics
*/
-#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x10000000
#define CONFIG_SYS_MEMTEST_END 0x20000000
#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \
CONFIG_SYS_ADV7611_I2C
CONFIG_SYS_ALT_BOOT
CONFIG_SYS_ALT_FLASH
-CONFIG_SYS_ALT_MEMTEST
CONFIG_SYS_AMASK0
CONFIG_SYS_AMASK0_FINAL
CONFIG_SYS_AMASK1