]> git.sur5r.net Git - openocd/log
openocd
6 years agoftdi: demote unhelpful debug messages
Steven Stallion [Mon, 1 May 2017 18:59:38 +0000 (13:59 -0500)]
ftdi: demote unhelpful debug messages

Some protocols make use of empty scan fields for optional padding, which
causes the log to fill with unhelpful messages that a field is empty.
The remaining LOG_DEBUG messages in ftdi_execute_scan have been demoted
to DEBUG_JTAG_IO such that these messages are only seen when debugging
JTAG.

Change-Id: I61fd4551411ce851da34e67d003bca5d7a71cd92
Signed-off-by: Steven Stallion <stallion@squareup.com>
Reviewed-on: http://openocd.zylin.com/4112
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
6 years agortos: check symbol list when updating uCOS-III
Steven Stallion [Tue, 9 Oct 2018 18:48:18 +0000 (13:48 -0500)]
rtos: check symbol list when updating uCOS-III

This patch corrects a crash in uCOS-III on a new GDB connection when
RTOS autodetection is not used. The crash was caused by not checking if
the symbol list had been loaded prior to updating threads.

Change-Id: I64c5133e02fe22fc8d14584cc40d87b49c935b0b
Signed-off-by: Steven Stallion <stallion@squareup.com>
Reviewed-on: http://openocd.zylin.com/4719
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agoesirisc: support eSi-RISC targets
Steven Stallion [Wed, 29 Aug 2018 00:18:01 +0000 (17:18 -0700)]
esirisc: support eSi-RISC targets

eSi-RISC is a highly configurable microprocessor architecture for
embedded systems provided by EnSilica. This patch adds support for
32-bit targets and also includes an internal flash driver and
uC/OS-III RTOS support. This is a non-traditional target and required
a number of additional changes to support non-linear register numbers
and the 'p' packet in RTOS support for proper integration into
EnSilica's GDB port.

Change-Id: I59d5c40b3bb2ace1b1a01b2538bfab211adf113f
Signed-off-by: Steven Stallion <stallion@squareup.com>
Reviewed-on: http://openocd.zylin.com/4660
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agojtag: make cmd_queue_scan_field_clone public
Steven Stallion [Sun, 26 Mar 2017 20:01:56 +0000 (15:01 -0500)]
jtag: make cmd_queue_scan_field_clone public

This patch makes the cmd_queue_scan_field_clone function public. This
permits targets to insert fields without affecting the submitted
scan_field list. This will be used in an upcoming target implementation
that needs to insert additional padding bits.

Change-Id: I8fbd3b9b4e413432471f4f1444048932c8fa189e
Signed-off-by: Steven Stallion <stallion@squareup.com>
Reviewed-on: http://openocd.zylin.com/4082
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agogdb_server: add support for architecture element
Steven Stallion [Tue, 21 Mar 2017 15:33:09 +0000 (10:33 -0500)]
gdb_server: add support for architecture element

This change adds optional support for a target to report architecture
information in the target description to GDB. This is needed by some GDB
implementations to properly support remote target with custom behavior.
More information on the architecture element can be found here:

    https://sourceware.org/gdb/onlinedocs/gdb/Target-Description-Format.html#Target-Description-Format

Change-Id: I57b19cae5ac3496256e4e5cc52cf6526ca5c322d
Signed-off-by: Steven Stallion <stallion@squareup.com>
Reviewed-on: http://openocd.zylin.com/4078
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agortos: support gdb_get_register_packet
Steven Stallion [Wed, 3 May 2017 17:46:11 +0000 (12:46 -0500)]
rtos: support gdb_get_register_packet

This patch adds support for p packet responses by targets configured
with RTOS support. This change required moving to a rtos_reg struct,
which is similar to struct reg used by targets, which resulted in
needing to update each stacking with register numbers. This patch also
allows targets with non-linear register numbers to function with RTOSes
as well.

Change-Id: I5b189d74110d6b6f2fa851a67ab0762ae6b1832f
Signed-off-by: Steven Stallion <stallion@squareup.com>
Reviewed-on: http://openocd.zylin.com/4121
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agoregister: support non-existent registers
Steven Stallion [Mon, 1 May 2017 19:38:35 +0000 (14:38 -0500)]
register: support non-existent registers

This patch fixes a number of bugs caused by incomplete support for
non-existent registers. This is needed for targets that provide optional
registers or non-linear register numbers.

Change-Id: I216196e0051f28887a2c3da410959382369eed80
Signed-off-by: Steven Stallion <stallion@squareup.com>
Reviewed-on: http://openocd.zylin.com/4113
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agodrivers: cmsis-dap: fix connection in JTAG mode
Antonio Borneo [Mon, 8 Oct 2018 14:42:10 +0000 (16:42 +0200)]
drivers: cmsis-dap: fix connection in JTAG mode

Commit 5aceec24122bc222896cfcfd91f7f082f630ac83 ("drivers:
cmsis-dap: pull up common connect code") breaks the driver and it
cannot connect anymore in JTAG mode.
The issue is caused in cmsis_dap_init() by anticipating the call to
cmsis_dap_usb_open(), which then sets cmsis_dap_handle and makes the
following test to always fail.
Actually the original code was quite tricky:
if (swd_mode)
do something that also sets cmsis_dap_handle;
if (cmsis_dap_handle == NULL)
do something for !swd_mode;

Convert the sequence of tricky "if"s in a single "if-then-else" to
handle clearly the cases swd_mode and !swd_mode.

Change-Id: I359a23bf26a3edc2461f4352daa0be83e78868f7
Fixes: 5aceec24122b ("drivers: cmsis-dap: pull up common connect code")
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4697
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
6 years agoflash/nrf5: support for nRF52810
Anders Westrup [Tue, 25 Sep 2018 19:18:53 +0000 (21:18 +0200)]
flash/nrf5: support for nRF52810

Change-Id: I01c430bfa593d20ea7a51c90d67052e374d239b3
Signed-off-by: Anders Westrup <anders@westrup.se>
Reviewed-on: http://openocd.zylin.com/4680
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Slowcoder <slowcoder@gmail.com>
6 years agotcl/board: Add Renesas R-Car Salvator-X(S) boards.
Adam Bass [Mon, 10 Sep 2018 15:04:23 +0000 (11:04 -0400)]
tcl/board: Add Renesas R-Car Salvator-X(S) boards.

Add configuration for the Renesas R-Car Salvator-X
and Renesas R-Car Salvator-XS boards.

Change-Id: I898008f56adb31908d30760f18217583fabf1c51
Signed-off-by: Adam Bass <adam.bass@renesas.com>
Reviewed-on: http://openocd.zylin.com/4670
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agotcl/target: Add Renesas R-Car Gen3 targets
Adam Bass [Mon, 10 Sep 2018 14:55:32 +0000 (10:55 -0400)]
tcl/target: Add Renesas R-Car Gen3 targets

Add configuration for the Renesas R-Car Generation 3 targets.
These are SoCs with Cortex A57s, A53s, and R7s. All cores
are supported.

Change-Id: I795233210e4f647a1a2a0adea7c058ae98b5db70
Signed-off-by: Adam Bass <adam.bass@renesas.com>
Reviewed-on: http://openocd.zylin.com/4669
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agogdb_server: avoid gdb server for virtual targets
Antonio Borneo [Tue, 28 Aug 2018 10:29:09 +0000 (12:29 +0200)]
gdb_server: avoid gdb server for virtual targets

Virtual targets, like mem_ap, do not or cannot implement the required
functionality to accept a GDB connection. In the case of mem_ap, the
method get_gdb_reg_list() is missing and a following connection from
gdb causes OpenOCD to segfault.
OpenOCD opens a GDB port for each target; it's always possible to
connect, by mistake, GDB to one virtual target.

Add a method to check if the target supports GDB connections (for the
moment just checking if get_gdb_reg_list is implemented).
Skip opening a gdb server for every targets that don't support GDB
connections.

Change-Id: Ia439a43efe1a9adbb1771cd9d252db8ffa32eb9d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4676
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agotarget/atsamv: make APCSW cacheable
Christopher Head [Wed, 19 Sep 2018 23:20:26 +0000 (16:20 -0700)]
target/atsamv: make APCSW cacheable

Change-Id: Ic00d3192642c682f370a6f7f8b70ae29744eb746
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/4678
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agotarget/stm32: make APCSW cacheable
Christopher Head [Fri, 14 Sep 2018 22:27:34 +0000 (15:27 -0700)]
target/stm32: make APCSW cacheable

Change-Id: I7c5c9720ded329848647f17db95f845e46c01c19
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/4674
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agocontrib/60-openocd.rules: provide hint to reload udev rules
Antonio Borneo [Mon, 27 Aug 2018 17:11:19 +0000 (19:11 +0200)]
contrib/60-openocd.rules: provide hint to reload udev rules

No need to reboot the Linux box when new rules are added to udev.
Suggest the command in the script header.

Change-Id: Ie95383bfd73914a3d2e2c05d77fa3eb32e68b7e2
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4665
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
6 years agotarget/cortex_m: fix typo
Christopher Head [Mon, 17 Sep 2018 22:49:24 +0000 (15:49 -0700)]
target/cortex_m: fix typo

The subunit of the debug unit is called the Flash Patch and Breakpoint
unit, abbreviated (by ARM no less) as FPB, not FBP.

Change-Id: Ia2f08470da705f0f1518feeca878f0f500507308
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/4675
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
6 years agoClarify what exactly the RISC-V code supports.
Tim Newsome [Fri, 24 Aug 2018 20:01:49 +0000 (13:01 -0700)]
Clarify what exactly the RISC-V code supports.

Change-Id: I8da657426cc52c738ab41bfb0164cbc6721c0aef
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: http://openocd.zylin.com/4655
Tested-by: jenkins
Reviewed-by: Philipp Guehring <pg@futureware.at>
Reviewed-by: Liviu Ionescu <ilg@livius.net>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agoAdded support for STM32L4X option bytes writing.
Thomas Søhus [Thu, 16 Aug 2018 12:04:45 +0000 (14:04 +0200)]
Added support for STM32L4X option bytes writing.

Enables the programming of Write protection lock bits.

- Updated/re-factored with option_read, option_write and option_load commands.

Change-Id: I86358c7eb1285c3c0baac1564e46da8ced5fd025
Signed-off-by: Thomas Søhus <tls@ceepro.dk>
Reviewed-on: http://openocd.zylin.com/4654
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agodoc: fix use of deprecated config file in the example
Antonio Borneo [Tue, 4 Sep 2018 17:01:45 +0000 (19:01 +0200)]
doc: fix use of deprecated config file in the example

Commit 31c58c139d85 ("jtag: drivers: stlink: handle all versions with
single config") deprecates the use of "interface/stlink-v2-1.cfg" in
favor of a unique config file "interface/stlink.cfg".

Update the example in the documentation.

Change-Id: I1aed7c70e15f4edb4f81a3ee8e3bce575fde873b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4667
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
6 years agoflash/nrf5: support for nRF52840 Q1AAC0
Kai Geissdoerfer [Mon, 13 Aug 2018 10:35:47 +0000 (12:35 +0200)]
flash/nrf5: support for nRF52840 Q1AAC0

Change-Id: Id3280dadece84e1d68544936e44d506c7930a55d
Signed-off-by: Kai Geissdoerfer <kai.geissdoerfer@tu-dresden.de>
Reviewed-on: http://openocd.zylin.com/4649
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agoflash/nrf5: time-based timeout waiting for flash controller
Kai Geissdoerfer [Mon, 13 Aug 2018 10:35:09 +0000 (12:35 +0200)]
flash/nrf5: time-based timeout waiting for flash controller

Change-Id: Id214df154dc359ca130c8d8fe1554d106621b9cd
Signed-off-by: Kai Geissdoerfer <kai.geissdoerfer@tu-dresden.de>
Reviewed-on: http://openocd.zylin.com/4648
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agoarm_adi_v5: remove useless cast to int
Antonio Borneo [Tue, 4 Sep 2018 13:37:32 +0000 (15:37 +0200)]
arm_adi_v5: remove useless cast to int

The field ap_num in struct adiv5_private_config is already of type int.
Casting it to type int has no sense.

Change-Id: Ida642e808c02591bb58609425eccd096d404e2c4
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4666
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agotcl/board: Add Emcraft imx8 SOM BSB support
Guido Günther [Thu, 9 Aug 2018 15:11:43 +0000 (17:11 +0200)]
tcl/board: Add Emcraft imx8 SOM BSB support

Tested with Olimex ARM-USB-TINY-H adapter

Simple commands work fine but there are currently issues when attaching
remote gdb or running virt2phys:

    https://sourceforge.net/p/openocd/tickets/201/

Change-Id: I86ccf1d93c5d23870bb522f92b3e2af190d529e8
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-on: http://openocd.zylin.com/4646
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agotarget/cortex_a: poll all targets in SMP node after halt
Antonio Borneo [Mon, 23 Jul 2018 13:20:40 +0000 (15:20 +0200)]
target/cortex_a: poll all targets in SMP node after halt

The periodic poll scans all the targets in the same order they
have been declared in the configuration file.
When one target in a SMP node halts, the transition is detected
in the following poll and this triggers a halt request to all the
other cores of the SMP node.
The targets that will be polled afterwards will be identified as
"halted", but the targets already scanned will remain as
"running" until the next periodic poll.
This creates a race condition with GDB; GDB sets the breakpoints
when runs the target and removes them as soon as the target is
halted. When it receives the halt event, it starts removing the
breakpoints and fails on the targets that are still reported as
"running".

Fixed by polling all the targets in the SMP node before informing
GDB about the halt event.
This implementation is almost copy/paste from the one in aarch64.

Change-Id: Id2bd99f1e56b014e48e9e34ccb891b4219c518f8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4622
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agoftdi: extend ftdi_location format
Oleksij Rempel [Sat, 4 Aug 2018 12:49:35 +0000 (14:49 +0200)]
ftdi: extend ftdi_location format

To existing <bus>:<port>,<port> format add <bus>-<port>.<port> support.
The last format is used by kernel and other drivers.

Change-Id: I6528970d3af4f6a8bf7b27a0f7a763b5957fdf2b
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-on: http://openocd.zylin.com/4631
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agointerface: adapter configuration for FTDI C232HM
Steven Stallion [Sun, 26 Mar 2017 15:47:34 +0000 (10:47 -0500)]
interface: adapter configuration for FTDI C232HM

This patch adds support for the C232HM-DDSL-0 and C232HM-EDSL-0
FT232H-based cables from FTDI. For more information, see:
http://www.ftdichip.com/Products/Cables/USBMPSSE.htm

Change-Id: Ic97423eb1e2f6b5ebae04943cd5cce86f38771d5
Signed-off-by: Steven Stallion <stallion@squareup.com>
Reviewed-on: http://openocd.zylin.com/4081
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agotarget/mem_ap: generic mem-ap target
Matthias Welwarsky [Mon, 20 Feb 2017 13:29:01 +0000 (14:29 +0100)]
target/mem_ap: generic mem-ap target

This pseudo target allows attaching to any access point on the DAP at the
MEM-AP level and read and write addresses on the connected bus. For
example, one can create a mem_ap target on the APB-AP and read and write
registers of debug components directly. This allows many diagnostic
and other features be programmed entirely using TCL, without necessity
of adding drivers to OpenOCD.

Change-Id: I53229ffd68fb0f96fb68be15b0f3a76cc8843c8e
Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com>
Reviewed-on: http://openocd.zylin.com/4002
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Leonard Crestez <cdleonard@gmail.com>
6 years agoflash/stm32f2x: add stm32f7 revision Z identification
Cody Schafer [Tue, 21 Aug 2018 14:46:40 +0000 (10:46 -0400)]
flash/stm32f2x: add stm32f7 revision Z identification

Signed-off-by: Cody P Schafer <openocd@codyps.com>
Change-Id: Ia0169514d494bae2a98d92ebc97c8eccc10bc6c4
Reviewed-on: http://openocd.zylin.com/4657
Tested-by: jenkins
Reviewed-by: Christopher Head <chead@zaber.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agortos-helpers: fix minor typo in uC/OS-III helper
Steven Stallion [Wed, 29 Aug 2018 00:02:10 +0000 (17:02 -0700)]
rtos-helpers: fix minor typo in uC/OS-III helper

This patch corrects a spelling error in uCOS-III-openocd.c.

Change-Id: I6d1923ff1f5e6361358c45cec3dd6c08ca9ccef0
Signed-off-by: Steven Stallion <stallion@squareup.com>
Reviewed-on: http://openocd.zylin.com/4659
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
6 years agolibusb: return oocd error values
Oleksij Rempel [Thu, 5 Jul 2018 09:46:44 +0000 (11:46 +0200)]
libusb: return oocd error values

keep same return style where possible

Change-Id: I2f9b85dbc307a483609f76a84de77e3c74d346c7
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-on: http://openocd.zylin.com/4588
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agogdb_server: add per target option "-gdb-port"
Antonio Borneo [Mon, 21 May 2018 14:14:33 +0000 (16:14 +0200)]
gdb_server: add per target option "-gdb-port"

The argument passed to global config command "gdb_port" is usually,
but not always, a TCP port number. In case of multiple targets, this
numeric value is used as the first port of a set of consecutive TCP
ports assigned one per target.
If the argument is not a numeric value (e.g. "pipe", "disabled", ...)
then incrementing it for the next target has no sense.

Add the option "-gdb-port number" to the commands "target create" and
"$target_name configure" to override, for the specific target, the
general global configuration.

This permits to use a per target "-gdb-port disabled", when no gdb
port is required for that specific target.

It also makes possible to choose a custom TCP port number for each
target, overriding the usual sequence of consecutive port numbers.

Change-Id: I3b9a1910b28ab4bc757e839d0e5d08ffc29f7ab4
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4530
Tested-by: jenkins
Reviewed-by: Christopher Head <chead@zaber.com>
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agoadi_v5: enforce check on AP number value
Antonio Borneo [Wed, 5 Sep 2018 13:37:15 +0000 (15:37 +0200)]
adi_v5: enforce check on AP number value

The AP number value is restricted in 8 bits unsigned by ADI-v5
specification. Nevertheless, an "invalid" value is used by
target cortex-m to force an automatic detection of the AP.

Replace magic numbers by using new macros for AP max number and
for the value of AP invalid.
Check the value passed through -ap-num flag during configuration.

Change-Id: Ic19a367db0ab11c0ebd070750eca0647d25279a5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4668
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agotarget: armv8: Ensure target is halted for virt2phys
Guido Günther [Fri, 10 Aug 2018 10:01:17 +0000 (12:01 +0200)]
target: armv8: Ensure target is halted for virt2phys

Othewise the error reported as

    Timeout waiting for dpm prepare

Change-Id: Ieed2fdcd94ae4e877a749df3eec07a01dbf80b10
Closes: https://sourceforge.net/p/openocd/tickets/201/
Found-by: Matthias Welwarsky <matthias@welwarsky.de>
Signed-off-by: Guido Günther <guido.gunther@puri.sm>
Reviewed-on: http://openocd.zylin.com/4647
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agortos/linux.c: fix clang static analyzer warning
Tomas Vanek [Sun, 5 Aug 2018 15:16:01 +0000 (17:16 +0200)]
rtos/linux.c: fix clang static analyzer warning

Remove sizeof(int64_t) from string size computation.

Change-Id: I029b394df5d62a2594a723c4c0e13608b3423b9b
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4640
Tested-by: jenkins
6 years agoflash/at91sam4: fix clang static analyzer warning
Tomas Vanek [Sun, 5 Aug 2018 14:39:31 +0000 (16:39 +0200)]
flash/at91sam4: fix clang static analyzer warning

Change-Id: I5e5319d855c868adfa012f68086f7f809ec5a069
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4639
Tested-by: jenkins
6 years agoflash/at91sam4: set wait states only once per write
Tomas Vanek [Sat, 21 Jul 2018 11:21:08 +0000 (13:21 +0200)]
flash/at91sam4: set wait states only once per write

Read-modify-write setting of FMR register requires an USB turnaround.
Setting FMR before each page write is not necessary and decreases the
write speed.

Change-Id: I67844c898aaf117f155c762c979840b603c767ed
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4611
Tested-by: jenkins
Reviewed-by: Svetoslav Enchev <svetoslav.enchev@gmail.com>
6 years agoflash/at91sam4: emit flash bank info
Tomas Vanek [Sat, 21 Jul 2018 09:17:59 +0000 (11:17 +0200)]
flash/at91sam4: emit flash bank info

Change related LOG_INFO to LOG_DEBUG

Change-Id: I0c09b1ec83da631b26980dc8632b9031fe2921a3
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4610
Tested-by: jenkins
Reviewed-by: Erwin Oegema <blablaechthema@hotmail.com>
Reviewed-by: Svetoslav Enchev <svetoslav.enchev@gmail.com>
6 years agoflash/at91sam4: run probe just once
Tomas Vanek [Sat, 21 Jul 2018 08:28:48 +0000 (10:28 +0200)]
flash/at91sam4: run probe just once

Reread registers in sam4_GetInfo()

Change-Id: I3b023b3e642a9c052b5c41673d196317f7e7f2e3
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4609
Tested-by: jenkins
Reviewed-by: Erwin Oegema <blablaechthema@hotmail.com>
Reviewed-by: Svetoslav Enchev <svetoslav.enchev@gmail.com>
6 years agomax32xxx: Support for MAX32XXX devices.
Kevin Gillespie [Thu, 14 Jul 2016 18:00:23 +0000 (13:00 -0500)]
max32xxx: Support for MAX32XXX devices.

Adding flash programming support for Maxim Integrated MAX32XXX
devices.

Change-Id: I5b0f57a885f9d813240e4bc2d9f765b743e1cfc3
Signed-off-by: Kevin Gillespie <kgills@gmail.com>
Reviewed-on: http://openocd.zylin.com/3543
Tested-by: jenkins
Reviewed-by: Ismail H. KOSE <ihkose@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
6 years agotarget/riscv/riscv-011: fix compile warning about uninitialized variable
Svetoslav Enchev [Sun, 5 Aug 2018 09:40:32 +0000 (12:40 +0300)]
target/riscv/riscv-011: fix compile warning about uninitialized variable

In MSYS2 MinGW 64-bit
git clone git://git.code.sf.net/p/openocd/code openocd
$ gcc --version
gcc.exe (Rev1, Built by MSYS2 project) 8.2.0
./bootstrap
./configure --prefix=
$ cat config.status | grep CFLAGS
CFLAGS='-g -O2'
make bindir = "bin-x64"

depbase=`echo src/target/riscv/riscv-011.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
/bin/sh ./libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.  -D__USE_MINGW_ANSI_STDIO -I./src -I./src -I./src/helper -DPKGDATADIR=\"/mingw64/share/openocd\" -DBINDIR=\"bin-x64\" -I./jimtcl -I./jimtcl  -Wall -Wstrict-prototypes -Wformat-security -Wshadow -Wextra -Wno-unused-parameter -Wbad-function-cast -Wcast-align -Wredundant-decls -Werror -g -O2 -MT src/target/riscv/riscv-011.lo -MD -MP -MF $depbase.Tpo -c -o src/target/riscv/riscv-011.lo src/target/riscv/riscv-011.c &&\
mv -f $depbase.Tpo $depbase.Plo
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -D__USE_MINGW_ANSI_STDIO -I./src -I./src -I./src/helper -DPKGDATADIR=\"/mingw64/share/openocd\" -DBINDIR=\"bin-x64\" -I./jimtcl -I./jimtcl -Wall -Wstrict-prototypes -Wformat-security -Wshadow -Wextra -Wno-unused-parameter -Wbad-function-cast -Wcast-align -Wredundant-decls -Werror -g -O2 -MT src/target/riscv/riscv-011.lo -MD -MP -MF src/target/riscv/.deps/riscv-011.Tpo -c src/target/riscv/riscv-011.c -o src/target/riscv/riscv-011.o
src/target/riscv/riscv-011.c: In function 'poll_target':
src/target/riscv/riscv-011.c:1799:6: error: 'reg' may be used uninitialized in this function [-Werror=maybe-uninitialized]
      reg_cache_set(target, reg, ((data & 0xffffffff) << 32) | value);
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/target/riscv/riscv-011.c:1686:17: note: 'reg' was declared here
    unsigned int reg;
                 ^~~
cc1.exe: all warnings being treated as errors
make[2]: *** [Makefile:3250: src/target/riscv/riscv-011.lo] Error 1

Change-Id: I6996dcb866fbace26817636f4bedba09510a087f
Signed-off-by: Svetoslav Enchev <svetoslav.enchev@gmail.com>
Reviewed-on: http://openocd.zylin.com/4635
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agotcl/board: update all uses of interface/stlink-v2-1 to interface/stlink
Cody P Schafer [Wed, 7 Mar 2018 16:29:45 +0000 (11:29 -0500)]
tcl/board: update all uses of interface/stlink-v2-1 to interface/stlink

Change-Id: I5e27e84d022f73101376e8b4a1bdc65f58fd348a
Signed-off-by: Cody P Schafer <openocd@codyps.com>
Reviewed-on: http://openocd.zylin.com/4456
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agotarget/cortex_m: restore C_MASKINTS after reset
Christopher Head [Tue, 17 Jul 2018 20:55:55 +0000 (13:55 -0700)]
target/cortex_m: restore C_MASKINTS after reset

The cortex_m maskisr user-facing setting is not changed across a target
reset. However, the in-core C_MASKINTS bit was always cleared as part of
reset processing, meaning that a cortex_m maskisr on setting would not
be respected after a reset. Set C_MASKINTS based on the user-facing
setting value rather than always clearing it after reset.

Change-Id: I5aa5b9dfde04a0fb9c6816fa55b5ef1faf39f8de
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/4605
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agodoc: fix typo in cortex_m maskisr command
Christopher Head [Tue, 31 Jul 2018 17:25:32 +0000 (10:25 -0700)]
doc: fix typo in cortex_m maskisr command

Change-Id: I37795c320ff7cbf6f2c7434e03b26dbaf6fc6db4
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/4621
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agoAdd detail to `wrong register size` error.
Tim Newsome [Mon, 25 Jun 2018 20:44:01 +0000 (13:44 -0700)]
Add detail to `wrong register size` error.

Signed-off-by: Tim Newsome <tim@sifive.com>
Change-Id: Id31499c94b539969970251145e42c89c943fd87c
Reviewed-on: http://openocd.zylin.com/4577
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agotarget/armv7a_cache: add gdb keep-alive and fix a missing dpm finish
Antonio Borneo [Tue, 24 Jul 2018 08:17:57 +0000 (10:17 +0200)]
target/armv7a_cache: add gdb keep-alive and fix a missing dpm finish

Depending on range size, the loop on cache operations can take quite
some time, causing gdb to timeout.

Add keep-alive to prevent gdb to timeout.
Add also a missing dpm->finish() to balance dpm->prepare().

Change-Id: Ia87934b1ec19a0332bb50e3010b582381e5f3685
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4627
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agotarget/cortex_a: allow command dacrfixup during init phase
Antonio Borneo [Wed, 25 Jul 2018 07:47:16 +0000 (09:47 +0200)]
target/cortex_a: allow command dacrfixup during init phase

There is no reason to restrict the command "cortex_a dacrfixup"
to the EXEC phase only.
Change the command mode to ANY so the command can be used in
the initialization phase too.

Change-Id: I498cc6b2dbdc48b3b2dd5f0445519a51857b295f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4623
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agotarget/arm_adi_v5: allow commands apsel and apcsw during init phase
Antonio Borneo [Wed, 25 Jul 2018 08:24:49 +0000 (10:24 +0200)]
target/arm_adi_v5: allow commands apsel and apcsw during init phase

The current implementation of apsel cannot be executed during the
initialization phase because it queries the DAP AP to retrieve and
print the content of IDR register, and the query is only possible
later on during the exec phase.
But IDR information is already printed by the dedicated command
apid, making redundant printing it by apsel too.
Being unable to run apsel during initialization, makes also apcsw
command (that depends on apsel) not usable in such phase.

Modify the command apsel to only set the current AP, without making
any transfer to the (possibly not initialized yet) DAP. When run
without parameters, just print the current AP number.
Change mode to COMMAND_ANY to apsel and to apcsw.

Change-Id: Ibea6d531e435d1d49d782de1ed8ee6846e91bfdf
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4624
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agotcl/target: add Allwinner V3s SoC support
Oleksij Rempel [Thu, 22 Feb 2018 08:42:59 +0000 (09:42 +0100)]
tcl/target: add Allwinner V3s SoC support

Change-Id: I2459d2b137050985b7301047f9651951d72d9e9e
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4427
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
6 years agotcl/target/stm32f0x: Allow overriding the Flash bank size
Dominik Peklo [Sat, 7 Jul 2018 07:16:43 +0000 (17:16 +1000)]
tcl/target/stm32f0x: Allow overriding the Flash bank size

Copy & paste from another stm32 target.

Change-Id: I0f6cbcec974ce70c23c1850526354106caee1172
Signed-off-by: Dominik Peklo <dom.peklo@gmail.com>
Reviewed-on: http://openocd.zylin.com/4575
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agotarget/cortex_m: fix incorrect comment
Christopher Head [Tue, 31 Jul 2018 17:05:36 +0000 (10:05 -0700)]
target/cortex_m: fix incorrect comment

The code sets C_MASKINTS if that bit is not already set (correctly). Fix
the comment to agree.

Change-Id: If4543e2660a9fa2cdabb2d2698427a6c8d9a274c
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/4620
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agoserver/server: Add ability to remove services
Marc Schink [Mon, 19 Dec 2016 19:09:08 +0000 (20:09 +0100)]
server/server: Add ability to remove services

Add the ability to remove services while OpenOCD is running.

Change-Id: I4067916fda6d03485463fa40901b40484d94e24e
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4054
Tested-by: jenkins
Reviewed-by: Fredrik Hederstierna <fredrik@hederstierna.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agortos: add support for NuttX
Masatoshi Tateishi [Sun, 9 Apr 2017 23:48:44 +0000 (08:48 +0900)]
rtos: add support for NuttX

This patch introduces RTOS support for NuttX. Currently,
only ARM Cortex-M (both FPU and FPU-less) targets are supported.

To use, add the following lines to ~/.gdbinit.

define hookpost-file
  eval "monitor nuttx.pid_offset %d", &((struct tcb_s *)(0))->pid
  eval "monitor nuttx.xcpreg_offset %d", &((struct tcb_s *)(0))->xcp.regs
  eval "monitor nuttx.state_offset %d", &((struct tcb_s *)(0))->task_state
  eval "monitor nuttx.name_offset %d", &((struct tcb_s *)(0))->name
  eval "monitor nuttx.name_size %d", sizeof(((struct tcb_s *)(0))->name)
end

And please make sure the above values are the same as in
src/rtos/nuttx_header.h

Change-Id: I2aaf8644d24dfb84b500516a9685382d5d8fe48f
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Signed-off-by: Masatoshi Tateishi <Masatoshi.Tateishi@jp.sony.com>
Signed-off-by: Nobuto Kobayashi <Nobuto.Kobayashi@sony.com>
Reviewed-on: http://openocd.zylin.com/4103
Tested-by: jenkins
Reviewed-by: Alan Carvalho de Assis <acassis@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agonrf5: add free_driver_priv
Jim Paris [Fri, 20 Jul 2018 15:14:34 +0000 (11:14 -0400)]
nrf5: add free_driver_priv

Change-Id: I429a9868deb0c4b51f47a4bbad844bdc348e8d21
Signed-off-by: Jim Paris <jim@jtan.com>
Reviewed-on: http://openocd.zylin.com/4608
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agotarget/arm_adi_v5: add command "dpreg"
Antonio Borneo [Tue, 22 May 2018 22:55:03 +0000 (00:55 +0200)]
target/arm_adi_v5: add command "dpreg"

For very low level debug or development around DAP, it is useful
to have direct access to DP registers.

Add command "dpreg" by mimic the syntax of the existing "apreg"
command:
$dap_name dpreg reg [value]

Change-Id: Ic4ab451eb5e74453133adee61050b4c6f656ffa3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4612
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agoflash/nor/tcl.c: fix flash bank bounds check in 'flash fill' command handler
Bohdan Tymkiv [Thu, 3 May 2018 19:50:58 +0000 (22:50 +0300)]
flash/nor/tcl.c: fix flash bank bounds check in 'flash fill' command handler

Steps to reproduce ( STM32F103 'Blue Pill', 128KiB of flash ):
> flash fillh 0x0801FFFE 00 1
wrote 2 bytes to 0x0801fffe in 0.019088s (0.102 KiB/s)
> flash fillw 0x0801FFFE 00 1
Error: stm32f1x.cpu -- clearing lockup after double fault
Error: error waiting for target flash write algorithm
Error: error writing to flash at address 0x08000000 at offset 0x0001fffe

Change-Id: I145092ec5e45bc586b3df48bf37c38c9226915c1
Signed-off-by: Bohdan Tymkiv <bhdt@cypress.com>
Reviewed-on: http://openocd.zylin.com/4516
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agozy1000: fix compile error with gcc 8.1.1
Antonio Borneo [Thu, 19 Jul 2018 07:38:05 +0000 (09:38 +0200)]
zy1000: fix compile error with gcc 8.1.1

The fall-through comment is not taken in consideration by gcc 8.1.1
because it is inside the braces of a C-code block.

Move the comment outside the C block.

Change-Id: I22d87b2dee109fb8bcf2071ac55fdf7171ffcf4b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4614
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agoserver: explicitly call "shutdown" when catch CTRL-C or a signal
Antonio Borneo [Fri, 1 Jun 2018 16:31:49 +0000 (18:31 +0200)]
server: explicitly call "shutdown" when catch CTRL-C or a signal

Every TCL command can be renamed (or deleted) and then replaced by
a TCL proc that has the same name of the original TCL command.
This can be used either to completely replace an existing command
or to wrap the original command to extend its functionality.
This applies also to the OpenOCD command "shutdown" and can be
useful, for example, to set back some default value to the target
before quitting OpenOCD.
E.g. (TCL code):
rename shutdown original_shutdown
proc shutdown {} {
puts "This is my implementation of shutdown"
# my own stuff before exit OpenOCD
original_shutdown
}

Unfortunately, sending a signal (or pressing CTRL-C) to terminate
OpenOCD doesn't trigger calling the original "shutdown" command
nor its (eventual) replacement.

Detect if the main loop is terminated by an external signal and
in such case execute explicitly the command "shutdown".
Replace with enum the magic numbers assumed by "shutdown_openocd".

Please notice that it's possible to write a custom "shutdown" TCL
proc that does not call the original "shutdown" command. This is
useful, for example, to prevent the user to quit OpenOCD by typing
"shutdown" in the telnet session.
Such case will not prevent OpenOCD to terminate when receiving a
signal; OpenOCD will quit after executing the custom "shutdown"
command.

Change-Id: I86b8f9eab8dbd7a28dad58b8cafd97caa7a82f43
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4551
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agotarget/riscv: fix compile error with gcc 8.1.1
Antonio Borneo [Wed, 25 Jul 2018 20:51:51 +0000 (22:51 +0200)]
target/riscv: fix compile error with gcc 8.1.1

Fix compile error:
src/target/riscv/riscv-011.c: In function ‘slot_offset’:
src/target/riscv/riscv-011.c:238:4: error: this statement may fall through
 [-Werror=implicit-fallthrough=]
    switch (slot) {
    ^~~~~~
src/target/riscv/riscv-011.c:243:3: note: here
   case 64:
   ^~~~

Fixes: a51ab8ddf63a ("Add RISC-V support.")
Change-Id: I7fa86b305bd90cc590fd4359c3698632d44712e5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4618
Tested-by: jenkins
Reviewed-by: Jiri Kastner <cz172638@gmail.com>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
6 years agotarget|board: Add Intel (Altera) Arria 10 target and related board
Oleksij Rempel [Thu, 28 Jun 2018 10:18:07 +0000 (12:18 +0200)]
target|board: Add Intel (Altera) Arria 10 target and related board

Target information about this SoC can be found here:
https://www.altera.com/products/fpga/arria-series/arria-10/overview.html

Achilles Instant-Development Kit Arria 10 SoC SoM:
https://www.reflexces.com/products-solutions/development-kits/arria-10/achilles-instant-development-kit-arria-10-soc-som

Change-Id: Id78c741be6a8b7d3a70f37d41088e47ee61b437a
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-on: http://openocd.zylin.com/4583
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
6 years agofpga/altera-10m50: add all device id
Oleksij Rempel [Tue, 10 Jul 2018 07:55:54 +0000 (09:55 +0200)]
fpga/altera-10m50: add all device id

add all currently know Intel (Alter) MAX 10 device ids

Change-Id: I6a88fef222c8e206812499d41be863c3d89fa944
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-on: http://openocd.zylin.com/4598
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
6 years agotcl/board: add DPTechnics DPT-Board-v1
Oleksij Rempel [Mon, 19 Feb 2018 16:00:17 +0000 (17:00 +0100)]
tcl/board: add DPTechnics DPT-Board-v1

it is Atheros AR9331 based IoT dev board.

Change-Id: I6fc3cdea1bef49c53045018ff5acfec4d5610ba6
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4424
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
6 years agotcl/target/atheros_ar9331: add documentation and extra helpers
Oleksij Rempel [Sat, 2 Dec 2017 18:55:11 +0000 (19:55 +0100)]
tcl/target/atheros_ar9331: add documentation and extra helpers

Sync it with experience gathered on Qualcomm QCA4531 SoC. This
chips are in many ways similar.

Change-Id: I06b9c85e5985a09a9be3cb6cc0ce3b37695d2e54
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4423
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
6 years agotcl/target/atheros_ar9331: add DDR2 helper
Oleksij Rempel [Mon, 19 Feb 2018 14:49:31 +0000 (15:49 +0100)]
tcl/target/atheros_ar9331: add DDR2 helper

this helper works on many different boards, so it is
good to have it in target config

Change-Id: I068deac36fdd73dbbcedffc87865cc5b9d992c1d
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4422
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
6 years agotcl/target|board: move common AR9331 code to atheros_ar9331.cfg
Antony Pavlov [Sun, 20 Sep 2015 13:52:37 +0000 (16:52 +0300)]
tcl/target|board: move common AR9331 code to atheros_ar9331.cfg

The ar9331_25mhz_pll_init and ar9331_ddr1_init routines
can be used not only for TP-Link MR3020 board,
so move them to the common atheros_ar9331.cfg file.

Change-Id: I04090856b08151d6bb0f5ef9cc654efae1c81835
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Reviewed-on: http://openocd.zylin.com/2999
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
6 years agotcl/board: add config for 8devices LIMA board
Oleksij Rempel [Wed, 31 Jan 2018 10:58:50 +0000 (11:58 +0100)]
tcl/board: add config for 8devices LIMA board

More information about this board can be found here:
https://www.8devices.com/products/lima

Change-Id: Id35a35d3e986630d58d37b47828870afd107cc6a
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4406
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
6 years agotcl/target: add config for Qualcomm QCA4531
Oleksij Rempel [Wed, 31 Jan 2018 10:54:39 +0000 (11:54 +0100)]
tcl/target: add config for Qualcomm QCA4531

The QCA4531 is a two stream (2x2) 802.11b/g/n single-band programmable
Wi-Fi System-on-Chip (SoC) for the Internet of Things (IoT).
https://www.qualcomm.com/products/qca4531

Change-Id: I58398c00943b005cfaf0ac1eaad92d1fa4e2cba7
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4405
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
6 years agomips_m4k: add optional reset handler
Oleksij Rempel [Sat, 10 Feb 2018 15:37:31 +0000 (16:37 +0100)]
mips_m4k: add optional reset handler

In some cases by using SRST we can't halt CPU early enough. And
option PrRst is not available too. In this case the only way is
to set BOOT flag over EJTAG and reset CPU or SoC from CPU itself.
For example by writing to some reset register.

This patch is providing possibility to use user defined reset-assert
handler which will be enabled only in case SRST is disabled. It is
needed to be able switch between two different reset variants on run
time.

Change-Id: I6ef98f1871ea657115877190f7cc7a5e8f3233e4
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4404
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
6 years agotarget/cortex_a: fix compile error for uninitialized variable
Paul Bartholomew [Wed, 25 Jul 2018 20:59:01 +0000 (22:59 +0200)]
target/cortex_a: fix compile error for uninitialized variable

Commit ad6c71e151590f9d07eb07eda978a8d2a845259c introduced the
variable "mmu_enabled" whose pointer is passed to cortex_a_mmu()
that initialises it.
This initialization is not visible to the compiler that issue
a compile error.
The same situation is common across the same file and the usual
workaround is to initialize it to zero; thus the same fix i
applied here.

Ticket: https://sourceforge.net/p/openocd/tickets/197/
Fixes: commit ad6c71e15159 ("cortex_a: fix virt2phys when mmu is disabled")
Change-Id: I77dec41acdf4c715b45ae37b72e36719d96d9283
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4619
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agotarget/cortex_m: make a variable local
Christopher Head [Tue, 17 Jul 2018 20:59:38 +0000 (13:59 -0700)]
target/cortex_m: make a variable local

The vec_ids variable is not referenced anywhere other than the vector
catch command handler. Make it local to that function.

Change-Id: Ie5865e8f78698c19a09f0b9d58269ced1c9db440
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/4606
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agodrivers: cmsis-dap: print serial if available
Karl Palsson [Wed, 13 Apr 2016 23:45:12 +0000 (23:45 +0000)]
drivers: cmsis-dap: print serial if available

Helpful for sanity checking connections

Change-Id: Ife0d8b4e12d4c03685aac8115c9739a4c1e994fe
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Reviewed-on: http://openocd.zylin.com/3405
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agocortex_a: fix virt2phys when mmu is disabled
Matthias Welwarsky [Fri, 15 Jul 2016 12:23:25 +0000 (14:23 +0200)]
cortex_a: fix virt2phys when mmu is disabled

When the MMU is not enabled on debug state entry, virt2phys cannot
perform a translation since it is unknown whether a valid MMU
configuration existed before. In this case, return the virtual
address as physical address.

Change-Id: I6f85a7a5dbc200be1a4b5badf10a1a717f1c79c0
Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com>
Reviewed-on: http://openocd.zylin.com/4480
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agousb_blaster: Don't unnecessarily go through DR-/IR-Pause
Daniel Glöckner [Wed, 4 Oct 2017 21:07:53 +0000 (23:07 +0200)]
usb_blaster: Don't unnecessarily go through DR-/IR-Pause

There is no need to pass through DR-/IR-Pause after a scan if we want to
go to DR-/IR-Update. We just have to skip the first step of the path to
the end state because we already did that step when shifting the last
bit.

v2:
 - Fix comments as remarked in review of v1

Change-Id: I3c10f02794b2233f63d2150934e2768430873caa
Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net>
Reviewed-on: http://openocd.zylin.com/4245
Tested-by: jenkins
Reviewed-by: Christopher Head <chead@zaber.com>
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agoAdd RISC-V support.
Tim Newsome [Wed, 18 Jul 2018 20:34:23 +0000 (13:34 -0700)]
Add RISC-V support.

This supports both 0.11 and 0.13 versions of the debug spec.

Support for `-rtos riscv` will come in a separate commit since it was
easy to separate out, and is likely to be more controversial.

Flash support for the SiFive boards will also come in a later commit.

Change-Id: I1d38fe669c2041b4e21a5c54a091594aac3e2190
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: http://openocd.zylin.com/4578
Tested-by: jenkins
Reviewed-by: Liviu Ionescu <ilg@livius.net>
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agoarm_adi_v5: put SWJ-DP back to JTAG mode at exit
Antonio Borneo [Sun, 10 Jun 2018 12:39:26 +0000 (14:39 +0200)]
arm_adi_v5: put SWJ-DP back to JTAG mode at exit

When SWD mode is used, current OpenOCD code left the SWJ-DP in
SWD mode at exit. Also, current code is unable to switch back the
SWJ-DP in JTAG at next run, thus a power cycle of both target and
interface is required in order to run OpenOCD in JTAG mode again.

Put the SWJ-DP back to JTAG mode before exit from OpenOCD.

Use switch_seq(SWD_TO_JTAG) instead of dap_to_jtag(), because the
latter is not implemented on some interfaces. This is aligned
with the use of switch_seq(JTAG_TO_SWD) in swd_connect().

Change-Id: I55d3faebe60d6402037ec39dd9700dc5f17c53b0
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4493
Tested-by: jenkins
Reviewed-by: Bohdan Tymkiv <bhdt@cypress.com>
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agodrivers: cmsis_dap_usb: implement cmd JTAG_TMS
Antonio Borneo [Mon, 16 Apr 2018 20:54:22 +0000 (22:54 +0200)]
drivers: cmsis_dap_usb: implement cmd JTAG_TMS

Simply add a wrapper around cmsis_dap_cmd_DAP_SWJ_Sequence()

Change-Id: Icf86f84b24e9fec56e2f9e155396aac34b0e06d2
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4517
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agoRemove FSF mailing address.
Tim Newsome [Mon, 11 Jun 2018 19:47:52 +0000 (12:47 -0700)]
Remove FSF mailing address.

Checkpatch complains about this (FSF_MAILING_ADDRESS).

Change-Id: Ib46a7704f9aed4ed16ce7733d43c58254a094149
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: http://openocd.zylin.com/4559
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
6 years agoAvoid dereferencing NULL pointer.
Darius Rad [Tue, 22 May 2018 20:38:57 +0000 (16:38 -0400)]
Avoid dereferencing NULL pointer.

If a NULL pointer is passed, don't attempt to increment it.  This avoids
passing the now not-NULL pointer on and eventually segfaulting.  Also
remove some unnecessary temporary variables.

Change-Id: I268e225121aa283d59179bfae407ebf6959d3a4e
Signed-off-by: Darius Rad <darius@bluespec.com>
Reviewed-on: http://openocd.zylin.com/4550
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
6 years agoarmv7a: read ttbcr and ttb0/1 at every entry in debug state
Antonio Borneo [Thu, 12 Jul 2018 14:15:45 +0000 (16:15 +0200)]
armv7a: read ttbcr and ttb0/1 at every entry in debug state

Commit bfc5c764df145f68835543119865eabe462e19c2 avoids reading
ttbcr and ttb0/1 at every virt2phys translation by caching them,
and it updates the cached values in armv7a_arch_state().
But the purpose of any (*arch_state)() method, thus including
armv7a_arch_state(), is to only print out and inform the user
about some architecture specific status.
Moreover, to reduce the verbosity during a GDB session, the
method (*arch_state)() is not executed anymore at debug state
entry (check use of target->verbose_halt_msg in src/openocd.c),
thus the state of translation table gets out-of-sync triggering
Error: Address translation failure
or even using a wrong address in the memory R/W operation.

In addition, the commit above breaks the case of armv7r by
calling armv7a_read_ttbcr() unconditionally.

Fixed by moving in cortex_a_post_debug_entry() the call to
armv7a_read_ttbcr() on armv7a case only.
Remove the call to armv7a_read_ttbcr() in armv7a_identify_cache()
since it is (conditionally) called only in the same procedure
cortex_a_post_debug_entry().

Fixes: bfc5c764df14 ("armv7a: cache ttbcr and ttb0/1 on debug
state entry")
Change-Id: Ifc20eca190111832e339a01b7f85d28c1547c8ba
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4601
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agoserver: Improve signal handling under Linux
Brent Roman [Thu, 2 Feb 2017 04:49:18 +0000 (20:49 -0800)]
server: Improve signal handling under Linux

Commit 5087a955 added custom signal handlers for the openocd
server process.

Before this commit, when openocd is run as a background process
having the same controlling terminal as gdb, Control-C would be
handled by gdb to stop target execution and return to the gdb prompt.

However, after commit 5087a955, the SIGINT caused by pressing
Control-C also terminates openocd, effectively crashing the
debugging session.  The only way to avoid this is run openocd in
a different controling terminal or to detach openocd from its
controlling terminal,
thus losing all job control for the openocd process.

This patch improves the server's handling of POSIX signals:
1) Keyboard generated signals (INT and QUIT) are ignored
   when server process has is no controlling terminal.
2) SIGHUP and SIGPIPE are handled to ensure that .quit functions
   for each interface are called if user's logs out of X
   session or there is a network failure.

SIG_INT & SIG_QUIT still stop openocd
when it is running in the foreground.

Change-Id: I03ad645e62408fdaf4edc49a3550b89b287eda10
Signed-off-by: Brent Roman <genosensor@gmail.com>
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/3963
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
6 years agotarget/aarch64: Call aarch64_init_debug_access() earlier in aarch64_deassert_reset()
Dennis Ostermann [Wed, 18 Jul 2018 09:21:17 +0000 (11:21 +0200)]
target/aarch64: Call aarch64_init_debug_access() earlier in aarch64_deassert_reset()

On Renesas R-Car, calling 'reset halt' and 'reset init' always made DAP inaccessible. Calling 'reset' and 'halt' seperatly worked fine.
The only differences seems to be the point in time when aarch64_init_debug_access() is called. This patch aligns the behaviour.

Change-Id: I2296c65e48414a7d9846f12a395e5eca315b49ca
Signed-off-by: Dennis Ostermann <dennis.ostermann@renesas.com>
Reviewed-on: http://openocd.zylin.com/4607
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
6 years agotarget/armv7m_trace: Use prefix for enums
Marc Schink [Sat, 10 Dec 2016 11:59:27 +0000 (12:59 +0100)]
target/armv7m_trace: Use prefix for enums

Change-Id: I3f199e6053146a1094d96b98ea174b41bb021599
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/3905
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
6 years agotarget/armv7m_trace: Fix typo in enum
Marc Schink [Sat, 10 Dec 2016 11:48:44 +0000 (12:48 +0100)]
target/armv7m_trace: Fix typo in enum

Change-Id: I6364ee5011ef2d55c59674e3b97504a285de0cb2
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/3904
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
6 years agotarget: Fix segfault for 'mem2array'
Marc Schink [Wed, 4 Apr 2018 07:50:40 +0000 (09:50 +0200)]
target: Fix segfault for 'mem2array'

Call 'mem2array' without arguments to reproduce the segmentation
fault.

Change-Id: I02bf46cc8bd317abbb721a8c75d7cbfac99eb34e
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4534
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Christopher Head <chead@zaber.com>
6 years agonrf5: Add HWID 0x139 (52832 rev E0)
James Jacobsson [Mon, 16 Jul 2018 08:27:03 +0000 (10:27 +0200)]
nrf5: Add HWID 0x139 (52832 rev E0)

Change-Id: I71b7471ccfcb8fcc6de30da57ce4165c7fb1f73f
Signed-off-by: James Jacobsson <slowcoder@gmail.com>
Reviewed-on: http://openocd.zylin.com/4604
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agoAvoid null target->semihosting references.
Liviu Ionescu [Sun, 15 Jul 2018 06:45:13 +0000 (09:45 +0300)]
Avoid null target->semihosting references.

The new common semihosting code introduced a bug,
in certain conditions target->semihosting was
used without semihosting being initialised.

The solution was to explicitly test for
target->semihosting before dereferencing it.

Change-Id: I4c83e596140c68fe4ab32e586e51f7e981a40798
Signed-off-by: Liviu Ionescu <ilg@livius.net>
Reviewed-on: http://openocd.zylin.com/4603
Tested-by: jenkins
Reviewed-by: Jonathan Larmour <jifl@eCosCentric.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agoflash/nor/stm32lx: Add revision 'V' for STM32L1xx Cat.3 devices
Marc Schink [Mon, 2 Jul 2018 17:44:45 +0000 (19:44 +0200)]
flash/nor/stm32lx: Add revision 'V' for STM32L1xx Cat.3 devices

Change-Id: Ic92b0fb5b738af3bec79ae335876aa9e26f5f4cd
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4600
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
6 years agoflash/nor/at91sam4: fix sam4sa16c flash banks and its gpnvms count
Erwin Oegema [Fri, 13 Jul 2018 13:50:40 +0000 (15:50 +0200)]
flash/nor/at91sam4: fix sam4sa16c flash banks and its gpnvms count

There was already a github fork that had this fixed, but as we try
to use the latest, non-modified version of all software we use,
I would like to have this fix in the next releases of OpenOCD so
that if people uses $packagemanager, they will not have issues flashing
the last part of the flash of sam4sa16c chips.

Additionally, I've added some more logging related to the flash
bank that was used, and the chip ID that was detected.

Change-Id: I7ea5970105906e4560b727e46222ae9a91e41559
Signed-off-by: Erwin Oegema <blablaechthema@hotmail.com>
Reviewed-on: http://openocd.zylin.com/4599
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
6 years agoflash/nor: add support for TI MSP432 devices
Edward Fewell [Sat, 3 Jun 2017 02:20:26 +0000 (21:20 -0500)]
flash/nor: add support for TI MSP432 devices

Added msp432 flash driver to support the TI MSP432P4x and
MSP432E4x microcontrollers. Implemented the flash algo
helper as used in the TI debug and flash tools. This
implemention supports the MSP432E4, Falcon, and Falcon 2M
variants. The flash driver automatically detects the
connected variant and configures itself appropriately.
Added command to mass erase device for consistency with
TI tools and added command to unlock the protected BSL
region.

Tested using MSP432E401Y, MSP432P401R, and MSP432P4111
LaunchPads.
Tested with embedded XDS110 debug probe in CMSIS-DAP
mode and with external SEGGER J-Link probe.

Removed ti_msp432p4xx.cfg file made obsolete by this
patch.
Change-Id: I3b29d39ccc492524ef2c4a1733f7f9942c2684c0
Signed-off-by: Edward Fewell <efewell@ti.com>
Reviewed-on: http://openocd.zylin.com/4153
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agodrivers: cmsis-dap: Print version info when available
Karl Palsson [Wed, 13 Apr 2016 23:44:14 +0000 (23:44 +0000)]
drivers: cmsis-dap: Print version info when available

No need to wait until after connecting, might help diagnose part information by
printing earlier.

Change-Id: I51eb0d584be306baa811fbeb1ad6a604773e602c
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Reviewed-on: http://openocd.zylin.com/3404
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agodrivers: cmsis-dap: pull up common connect code
Karl Palsson [Wed, 13 Apr 2016 23:42:48 +0000 (23:42 +0000)]
drivers: cmsis-dap: pull up common connect code

Just a minor deduplication

Change-Id: Idd256883e5f6d4bd4dcc18462dd5468991f507b3
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Reviewed-on: http://openocd.zylin.com/3403
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agoflash/nor/tcl: Distinguish between sectors and blocks in status messages
Dominik Peklo [Sun, 24 Jun 2018 02:35:53 +0000 (12:35 +1000)]
flash/nor/tcl: Distinguish between sectors and blocks in status messages

Use the right word in flash protect command status messages based on
whether the target bank defines num_prot_blocks. Minor message style
tidy-up.

Change-Id: I5f40fb5627422536ce737f242fbf80feafe7a1fc
Signed-off-by: Dominik Peklo <dom.peklo@gmail.com>
Reviewed-on: http://openocd.zylin.com/4573
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Christopher Head <chead@zaber.com>
6 years agonds32: Avoid detected JTAG clock
Hellosun Wu [Wed, 8 Nov 2017 09:04:11 +0000 (17:04 +0800)]
nds32: Avoid detected JTAG clock

AICE2 doesn't support scan for the maximum clock frequency of
JTAG chain. It will cause USB command timeout.

Change-Id: I41d1e3be387b6ed5a4dd0be663385a5f053fbcf9
Signed-off-by: Hellosun Wu <wujiheng.tw@gmail.com>
Reviewed-on: http://openocd.zylin.com/4292
Tested-by: jenkins
Reviewed-by: Hsiangkai Wang <hsiangkai@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agoAdds SAMD11D14AU flash support.
Christopher Hoover [Tue, 10 Jul 2018 09:35:02 +0000 (02:35 -0700)]
Adds SAMD11D14AU flash support.

Corrects names of SAMD11D14AM and SAMD11D14ASS per datasheet.

Change-Id: I8beb15d5376966a4f8d7de76bfb2cbda2db440dc
Signed-off-by: Christopher Hoover <ch@murgatroid.com>
Reviewed-on: http://openocd.zylin.com/4597
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agotcl/board: add SAMD11 Xplained Pro evaluation board
Peter Lawrence [Sat, 28 Apr 2018 22:49:13 +0000 (17:49 -0500)]
tcl/board: add SAMD11 Xplained Pro evaluation board

Change-Id: Id996c4de6dc9f25f71424017bf07689fea7bd3af
Signed-off-by: Peter Lawrence <majbthrd@gmail.com>
Reviewed-on: http://openocd.zylin.com/4507
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agotarget: atmel samd10 xplained mini
Karl Palsson [Wed, 13 Apr 2016 23:35:32 +0000 (23:35 +0000)]
target: atmel samd10 xplained mini

cortex m0+ on a tiny board, with an mEDBG (CMSIS-DAP) debug interface.

Change-Id: Iaedfab578b4eb4aa2d923bd80f220f59b34e6ef9
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Reviewed-on: http://openocd.zylin.com/3402
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
6 years agopsoc5lp: fix erase check, add free_driver_priv
Tomas Vanek [Fri, 22 Jun 2018 08:09:53 +0000 (10:09 +0200)]
psoc5lp: fix erase check, add free_driver_priv

psoc5lp_erase_check() was not properly adapted to the new
armv7m_blank_check_memory() in the hot fix 53376dbbede4f0bf42e724ff
This change fixes handling of num_sectors in dependecy of ecc_enabled.
Also add comments how ecc_enabled influences num_sectors.

Add pointer to default_flash_free_driver_priv() to all psoc5lp flash
drivers to keep valgrind happy.

Change-Id: Ie1806538becd364fe0efb7a414f0fe6a84b2055b
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4569
Tested-by: jenkins
6 years agotarget/stm32f7x: Clear stuck HSE clock with CSS
Christopher Head [Mon, 30 Apr 2018 17:28:21 +0000 (10:28 -0700)]
target/stm32f7x: Clear stuck HSE clock with CSS

Change-Id: Ica0025ea465910dd664ab546b66f4f25b271f1f5
Signed-off-by: Christopher Head <chead@zaber.com>
Reviewed-on: http://openocd.zylin.com/4570
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
6 years agotarget/image: make i/j unsigned to avoid ubsan runtime error
Cody Schafer [Mon, 2 Jul 2018 19:56:53 +0000 (15:56 -0400)]
target/image: make i/j unsigned to avoid ubsan runtime error

src/target/image.c:1055:15: runtime error: left shift of 128 by 24 places cannot be represented in type 'int'

Change-Id: I322fd391cf3f242beffc8a274824763c8c5e69a4
Signed-off-by: Cody Schafer <openocd@codyps.com>
Reviewed-on: http://openocd.zylin.com/4584
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Christopher Head <chead@zaber.com>
6 years agogdb_server: set current_target from connection's one
Antonio Borneo [Mon, 2 Jul 2018 16:47:34 +0000 (18:47 +0200)]
gdb_server: set current_target from connection's one

In a multi-target environment we are supposed to have a single
gdb server for each target (or for each group of targets within
a SMP node).
By default, the gdb attached to a server sends its command to
the target (or to the SMP node targets) linked to that server.

This is working fine for the normal gdb commands, but it is
broken for the native OpenOCD commands executed through gdb
"monitor" command. In the latter case, gdb "monitor" commands
will be executed on the current target of OpenOCD configuration
script (that is either the last target created or the target
specified in a "targets" command).

Fixed in gdb_new_connection() by replacing the current target
in the connection's copy of command context.

Change-Id: If7c8f2dce4a3138f0907d3000dd0b15e670cfa80
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4586
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Christopher Head <chead@zaber.com>
6 years agogdb_server: only trigger once the event gdb-detach at gdb quit
Antonio Borneo [Mon, 25 Jun 2018 13:09:31 +0000 (15:09 +0200)]
gdb_server: only trigger once the event gdb-detach at gdb quit

When GDB quits (e.g. with "quit" command) we first execute
gdb_detach() to reply "OK" then, at GDB disconnect (either TCP
or pipe connection type), we execute gdb_connection_closed().
In case GDB is killed or it crashes, OpenOCD only executes the
latter when detects the disconnection.
Both gdb_detach() and gdb_connection_closed() trigger the event
TARGET_EVENT_GDB_DETACH thus getting it triggered twice on clean
GDB quit.

Do not trigger the event TARGET_EVENT_GDB_DETACH in gdb_detach()
and let only gdb_connection_closed() to handle it.

Change-Id: Iacf035c855b8b3e2239c1c0e259c279688b418ee
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4585
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>