1 Technical notes on version 2.1
4 Technical notes on version 2.0
8 kes Return JobId in db_get_job_record() when JobId==0. This should
10 kes Do not release source pointers when restarting a failed job.
12 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
13 This *should* fix bug #747.
14 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
17 kes Modify USTORE constructor to set an empty store_source string,
18 and don't copy the store_source string in a cancel. Hopefully
19 this will fix Arno's seg fault, bug #744.
20 kes Add back code to disable conio in configure. Fixes bug #743.
21 kes Correct the Options scanner in the FD to correctly handle
22 SHA1 option, which was eating the next option. Reported by
24 kes Add code to indicate when the SD is spooling, spool wait, and
25 despooling as requested by Alan Brown.
29 Version 2.0.0 released: 4 January 2007
31 kes Apply Eric's fix for client name editing on RunScripts.
32 kes Fix an incorrect dbcheck reference to Id.
34 Version 1.39.34 Released:
36 kes Convert dbcheck to use 64 bit DB IDs.
39 kes Clarify Volume migration error message.
40 kes Look for Job keyword when opening DB in console.
42 kes Add code in catreq.c to reject volumes not marked Enabled.
43 kes Add a few more ACL access checks.
44 kes Add \n in gnome2-console restore command so that output prints
45 nicer -- i.e. lines do not run together.
46 kes Fix autolabeling so that it will not mark a volume in error
47 if the volume was not actually opened. This should fix bugs
49 kes Require tape drive to be open before autolabeling.
50 kes Require explicit mount command on non-tapes before autolabeling.
51 kes Implement an open_client_db() that searches the keywords for
52 either a catolg or client, and opens the appropriate catalog.
53 This makes Bacula adjust better to multiple catalogs.
54 kes Use more name() methods for resources rather than hdr.name.
56 kes Fix code to check for two resources of same name. It forgot
57 to check the last entry. Fixes bug #734.
58 kes Apply scanvolume patch from Richard Mortimer that fixes bug
60 kes Apply Eric's patch for recycling the Scratch pool.
61 kes Note, for the tray-monitor (or almost any restricted console_
62 to work, in version 1.39.x you must add CatalogACL = catalog-name
63 kes Add appropriate new #undefs to autoconf/acconfig.h so that
64 configure works correctly.
65 kes Implement configure code to allow the user to disable IPv6 with
67 kes Apply Richard Mortimer's patch to prevent seg fault if mount point
68 not specified -- SD refuses to start.
69 kes Add magic.bacula from bug #715 to the scripts directory along with
70 Arno's explanation of how to install it.
71 kes Convert a bunch of hdr.name into name() method calls.
72 kes Fix the code to remove .bsr files. Fixes bug #736 -- Martin.
74 Version 1.39.32 released:
76 kes Take first catalog if gui is set, or if using dotcmd.
77 kes Fix a couple of compiler warnings in wx-console
78 kes Apply the immutable patch for FreeBSD hardlinked files supplied
80 kes Add Volume name to Forward spacing message.
81 kes Update migration job start time (so it is not zero) to prevent
82 immediate recycling of the job. This *should* fix bug #733.
84 ebl Fix runscript configuration parsing bug.
86 kes Add ENABLE_NLS (as suggested by Eric) to correct NLS problems.
87 Remove NLS kludge from baconfig.h. This fixes bug #729.
88 kes Allow seeking on DVD.
89 kes Add additional messages when Job canceled automatically for
90 max run time or max start wait exceeded. This fixes bug #621.
91 kes Update maxruntime-test in regression script to properly test
92 max run time -- from info given in bug #621.
93 kes Simplify automatic cancel code.
94 kes Add check for job_canceled() in FD when contacting SD so that if
95 job is canceled from max runtime, it terminates faster.
97 kes Save and restore volume name in stored/mount.c fixed bug #712
98 where wrong tape was requested in a mount.
99 kes Implement cleaner orphan buffer dumping with buf address.
100 kes Fix orphaned buffer when canceling job waiting on op intervention.
101 kes Update projects file for next vote.
102 kes Implement a fix (more could be done) for bug #728 where a double
103 EOF is writing on the Volume when spooling is enabled and the
104 connection with the FD fails (FD crash, comm error).
105 kes Disable attempting to autolabel when polling and device is not
106 a tape. This fixes bug #730 where polling with a removable disk
107 not mounted caused lots of new Volumes to be created then marked
110 kes Enable VSS by default.
112 Version 1.39.30 released:
114 kes Complete hopefully the last of the copyright transfer changes.
115 kes Separate NumVolumes in SD to NumReadVolumes and NumWrite volumes so
116 that migration writing to multiple volumes doesn't mess up reading
117 Volumes. This should fix bug #720 -- multivol migration fails.
118 kes Make migration SQL look only for Type='B' jobs to migrate. This should
119 fix bug #724 jobs getting migrated twice.
120 kes Convert remaining dev_cap(dev, ...) to use dev->has_cap().
121 kes Implement dev->clear_cap() and dev->set_cap() methods.
122 kes Turn off disk seeking on restore for DVDs since I am not 100%
125 kes Implement code that should properly set that a job was migrated,
126 if the migration was successful even if there were no file to
128 kes Apply Richard's patch to fix building or filed/restore.c without
130 kes Ensure that at least one block is written by the SD even if the
131 FD dies or fails -- should fix bug #728.
132 kes Convert stored/record.c ASSERT into a soft fail if the length of
133 a record is too insanely long. This should fix bug #???
135 kes Fix automatic labeling of File volumes, which was broken by new
136 removable device code.
138 kes Remove typedef uLong for HP in baconfig.h. It broke things.
139 lf Fix job byte reporting -- the digest code runs in verify.c and
140 increases this value. The better solution is to digest the
141 stream as we receive it, thus removing the need to re-read
142 from disk at all, but that requires more extensive and
143 potentially destabilizing changes.
144 lf This commit fixes backup and restore of HFS+ resource forks.
145 lf Add a long-missing 'break' statement in HFS+ attribute
146 handling that resulted in restore failures.
148 ebl Fix runscript to always execute command after all job type.
150 Version 1.39.30 released:
152 kes Mark build-depkgs-mingw3 executable in configure process.
153 kes Update autoconf/config.h.in to include LOCALEDIR
154 kes Undefine NLS settings for wxWidgets as there is a conflict with
155 their way of doing things.
156 kes Implement a rpool and rpool_source in jcr.h for Migration jobs.
157 kes Change a bunch of ->hdr.name to ->name()
158 kes Straighten out handling of read and write pools for Migration, including
159 getting the code in the proper order.
160 kes Improve migration error messages and debug output.
161 kes Shorten code path in migration if nothing found to do.
162 kes Implement read/write pool in migration job report.
163 kes Move ua_run.c select_job_level code into a subroutine (readability).
164 kes Move ua_run.c display_job_parameters into a subroutine.
165 kes Do not bash dcr->VolumeName in get_volume_info() because it makes
166 restore dependent on a valid catalog containing the Volume name.
168 kes Put make_catalog_backup SQL_BINDIR in an environment variable to
169 make it easier for the user to change.
170 kes Fail any backup job that tries to use encryption and sparse options.
171 Hopefully this is a temporary change.
172 kes Correct the EndJob return string for non-backup jobs.
173 kes Review the encryption restore code.
174 kes Implement a new encryption regression test with compression.
175 kes Modify migrate not to fail if nothing found to migrate.
176 kes Add #undef HAVE_OPENSSL, HAVE_TLS, HAVE_CYRPTO to autoconf/config.h.in
177 because they were not always set correctly.
179 kes Update configure.in to include python 2.5 search.
180 kes Back out unwanted migration change reported by Richard Mortimer.
182 kes Make migration with no files to migrate set normal termination.
183 kes Change message when job manually started to say Job queued. ...
184 kes Add job report indication of whether or not VSS and Encryption were
186 kes Modify sparseBlock variable name to make the code clearer.
187 kes Add more sparse tests to regress using gigaslam sparse file
189 kes Enable data encryption code.
190 kes Add gigaslam.c to src/tools. It creates a 1GB file that contains
191 only two blocks -- i.e. it is a real sparse file.
193 kes Enable disk seeking on restore.
194 kes Implement the SD 'Block Positioning = yes|no' directive. This
195 allows the user to turn off block level seeking, but restores
197 kes Change the word illegal to read invalid in a few places.
198 kes Fix Win32 build, which broke when I added parse_args_only in
199 lib. I'm not sure I got the entry point right for msvc.
200 kes Turn off data encryption. It can be enabled by defining
201 DATA_ENCRYPTION in src/version.h and recompiling.
202 kes Implement flag to turn off data encryption feature.
203 kes Move unserial code in restore.c to a subroutine. Add a bit of debug
205 kes Rework a bit of code in backup.c to handle sparse blocks correctly.
206 The main problem was that signatures were being generated on blocks
207 of zeros, which is unnecessary.
209 kes Fix scanner (next_arg) to handle leading double quote correctly.
210 kes Modify cd command in restore tree to look at full argument without
211 keywords. This fixes bug #716.
213 kes Do not update Migrated Job type if migration does not terminate
214 normally. This fixes bug #719.
215 kes Update ReleaseNotes
216 kes Purge Job records from the catalog for Migration. This was
217 not properly done previously. This fixes bug #718.
219 kes Initialize msg_type to M_INFO in migration. Pointed out by
221 kes Add some fflush() statements for debug output. This should not
222 really be necessary and defeats buffering but users continue
225 kes More copyright changes.
226 kes Make sure we don't detach from the despool read device since it
227 is a temporary structure where the condition variables are not
228 initialized. Bug #711.
230 kes Add Bacula version+date to Client record. This is a very minor
231 security problem in that passing the version facilitates a hacker's
232 life, but it will make support easier.
233 kes Implement fixes to make disk seeking work. Currently turned
234 off in version.h pending reserch on what problems it will cause
235 because of the previous bsnprinf() sign extension bug.
237 kes Add Landon's refactor of restore Feature request to the
239 kes Tweak debug levels and messages for examining the disk
242 kes Cleanup some of the error termination code in migration.
243 kes Separate read/write source strings to keep track of where
244 storage devices are used in a job.
245 kes Implement a new method of keeping track of which storage
246 device is used in a Job. USTORE keeps both a pointer to the
247 resource and to the source string.
248 kes Modify all code to use new storage set subroutines in job.c
249 kes Modify migrate.c so that the definitive selection of the storage
250 resource is done in the do_migration_init() routine prior to
251 the job going into the job queue. This permits accurate
252 deadlock detection (same read and write storage resource).
253 kes Remove bfill from btape (I think it was a left over stub).
255 kes Make sure that the storage for a job is pulled first from
256 the Pool and if not from the Job.
257 kes Ensure that either the Pool or the Job specifies a Storage
260 kes Start applying new FSFE copyright.
262 kes Add additional error messages in acquiring a drive for read.
263 kes Make WritePartAfterJob the default so that the last DVD part
264 always gets written to the DVD by default.
265 kes Add additional error messages in migration.
266 kes Suppress redundant error messages in migration (possibly more to do).
267 kes Apply Martin's fix (updated to 1.39) that takes into account
268 run storage overrides in the Director status display.
269 kes Implement, but turn off the submitted code that sets the EOT
270 model on FreeBSD machines. Turning on this code is too risky at
271 this point in the development.
273 kes Implement unique dbid routine for migration to prevent the same
274 JobId from being migrated twice. This should fix bug #709.
276 kes Apply Jaime Ventura's 'mail on success' patch.
277 kes Add a SMALLOC_SANITY_CHECK for Arno, which aborts Bacula
278 if memory usage gets too big.
279 kes Tweak migration to ensure that read/write devices are different.
281 kes Create an AUTHORS file to list Bacula contributors.
282 kes Add Richard Stallman's four GPL freedoms to LICENSE
283 kes Require the conf file to have a valid NextPool for writing the
286 ebl Enable RecycleCount in catalog.
287 ebl Fix "echo python | bconsole" segfault
289 kes Implement code to pass the MediaId to the SD. The SD then uses
290 this MediaId when creating JobMedia records. This fixes a bug
291 with Migration where the MediaId got set to the second Volume
292 read rather than the write Volume. Possibly (unlikely) fixes
294 kes Remove NextPool from Job resource.
295 kes Edit a few numbers in the restore dialog with commas.
296 kes Note, the DIR<->SD protocol has changed.
298 kes Replace () by {} in configure.in for proper HP configuration.
299 kes Shorten some lines over 80 characters in filed/backup.c
300 kes Cast sizeof() in filed/backup.c to avoid compiler warning.
302 Version 1.39.28 released:
304 kes Change error message 'illegal' to 'invalid' -- bug #707
305 kes Add rather primitive device resource deadlock detection in
306 the job queue handler. It detects the same read and write device
307 for migration and cancels the job.
308 kes Start adding a unique_dbid_hander() routine in migration to avoid
309 duplicate mediaids and duplicate jobids.
310 kes Add patch from bug #708 to permit relative paths such as ../xxx
311 in the restore tree routine.
312 kes Add Eric Bollengier's patch to reduce locking time in the SD after
313 despooling, and thus many jobs finish faster.
314 kes Correct locking order of reservations lock and device mutex in
315 reserve.c -- this should correct Arno's deadlock that occurred
316 when doing mount/unmount at the same time a job is reserving a
319 rbn Fixed problems with encryption when combined with compression
320 or sparse files. Unfortunately this means that all previous
321 encrypted backups can't be restored.
322 rbn Fixed problem in bfgets with Windows and Mac end of lines.
323 rbn Fixed bug in Windows version of close_bpipe() that cause programs
324 like bsmtp() to hang waiting for the pipe to be closed. Fixed
325 binary file type problems in open_bpipe().
326 rbn Fixed a number of bugs in the mysql DB scripts.
328 ebl Fix broken runscript on director. (RunBefore, RunAfter)
329 ebl Use M_ERROR instead of M_FATAL in runscript.c
331 ebl Small fix src/dird/job.c to add JobErrors count to catalog.
332 rbn Ignore UTF-8 marker at the start of .conf files.
333 rbn Add stab2cv to 3rd party dependencies. This is a utility I
334 wrote that is licensed under the GPL and available on SourceForge.
335 It converts the stab debugging info generated by gcc into Codeview
336 format. Currently it just translates function names to global
337 symbols. This is sufficient to get reasonable stack traces from
338 Dr Watson and to look at minidumps.
339 rbn Fix bug # 699 - winbacula client crashes whilerunning bat scripts.
340 rbn Enable Windows XP look and feel for the tray icons and wx-console.
341 rbn Add Windows specific FileSet example to bacula-dir.conf.
342 rbn Reorganize Start menu so that documentation and configuration are
345 rbn Change daemons and utilities so that if -c is omitted from the
346 command line AND there is no configuration file in the current
347 directory then the 'standard' configuration file (eg
348 /etc/bacula/bacula-*.conf) will be used. If the argument to -c
349 doesn't contain any path separators AND there is no configuration
350 file by that name in the current directory then the 'standard'
351 configuration file directory will be searched for a file by that
353 rbn Fixed restore on Windows so that backslashes as path separators works.
354 rbn Add missing query.sql file to Windows installer.
355 rbn Fixed Windows versions of catalog backup scripts.
357 kes Fix optional files in Makefile.in of src/filed that caused
358 a syntax error when using no optional files.
360 lf Fix a cosmetic bug in filed.c that caused spurious OpenSSL error
361 messages; there is no reason to attempt to load a private key.
362 from master key files.
364 Version 1.39.26 released:
366 kes Apply the three patches from Richard Mortimer.
367 bacula-reposition.patch, bacula-tape-reopen.patch, and
368 bacula-eod.patch. This corrects tape positioning on older devices,
369 and also a problem with btape.
370 kes Apply fix from bug report #696 where writing to a FIFO does not
371 work due to a dumb typo.
372 kes Unlock the tape door before the file descriptor is released. This
373 should fix lots of somewhat subtle failures when using an autochanger.
375 kes Correct mtx-changer bug that I introduced in a recent commit, and
376 pointed out by Robert Nelson -- thanks.
377 rbn Fix Windows' daemons so that messages print to stdout if not
378 running as a service.
379 rbn Add daemon name to trace file name (eg bacula-dir.trace).
380 rbn Fix environment variable expansion in directory names on Windows.
381 rbn Fix autochanger support in fill command.
382 rbn Update SQL scripts to match Unix versions.
383 rbn Fix daemon usage displays.
384 rbn Cleanup bacula-dir.conf template.
385 rbn Install openssl.cnf so that the openssl.exe installed in the
386 Bacula\bin directory can be used to generate keys and
387 certificates for TLS and encryption.
388 rbn Fix cleanup of spool files on Windows.
389 rbn Remove /silent option from daemons on Windows. The new default
390 is the same as the old /silent. To enable the message boxes that
391 previously were suppressed by /silent you must add /debug instead.
392 NOTE: As a result of this change, the first time you upgrade from
393 a previous version of 1.39.x you will receive the message
394 boxes when the remove of the old services succeeds. This
395 is the same behaviour as when migrating from a version prior
397 However, going forward, these message boxes will not appear on
398 upgrades or new installs.
399 rbn Add new /debug option. This option enables the message boxes that
400 previously were suppressed by the /silent option. In addition the
401 daemons running as services will open a console window if this
403 rbn Fix bug with service not being removed on migrated installs. This
404 should correct those cases where the file daemon install was failing
405 when upgrading from versions prior to 1.39.x.
408 kes Turn on heap reporting in Dir with zero debug level.
409 kes Send a message to the sys log when Bacula forces a SEG FAULT, and
410 send the same message to stdout.
412 kes Begin work on new GUI "console".
413 kes Make configure look in non-standard MySQL library directory
415 kes Make mtx-changer automatically configure the autochanger wait
416 procedure for Solaris, FreeBSD, and Linux. Previously, only Linux
418 kes Correct drop_sqlite_tables.in script to not delete the database.
419 kes When writing to a log file, close and reopen the file descriptor
420 if there is an error writing the file.
421 kes Modify the autochanger loaded?, load, and unload commands to print
422 the full text of any mtx output if there is an error. Helps to
423 ease diagnosis of autochanger problems.
424 kes Correct a few Win32 errno returns in the VSS code so that hopefully
425 a resonable Win32 error message will be printed.
426 kes Convert a few strcat()... to bstrncat() in the Win32 code.
428 rbn Added Windows version of bsmtp.
429 rbn Fixed path search for Windows so that Bacula\bin is automatically
430 searched for programs and scripts.
431 rbn Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf
434 Version 1.39.24 beta released:
436 rbn Fix restore problem with c:\ prefix bug #676.
437 rbn Verify that drive letter is valid on restore.
438 rbn Fix re-open() options for tape.
439 kes Apply dvd find volume patch from Richard Mortimer.
440 kes Eliminate the dvd specific mount routines using only the
442 kes Make update_free_space a method of DEVICE and rename
445 kes Require a messages command acl to be able to receive messages
447 kes Add console, system, and scan job types in util.c.
449 kes Print the Volume purged message only for real jobs to keep
450 from cluttering up the daemon messages.
451 kes Lock the tape drive door while Bacula is using the device.
452 kes Add back the 'No Jobs running' message to FD and SD status because
453 my regression script depends on it, and I'm too lazy to change the
455 kes Start using structure assignments (not too happy about it ...).
456 kes Fix a bug in the tools Makefile that broke on Solaris.
457 kes Unload any autochanger drive during a 'release' command.
459 kes Enhance error message when restoring without bootstrap file.
460 kes Check restored size only for regular files.
461 kes Store Python job level in job record in Dir.
462 kes Add back code to open tape device nonblocking, but if rewind fails
463 release file descriptor.
464 kes Modify acquire.c to first try autoloading the device. Also, ask operator
465 to mount tape if drive cannot be opened.
466 rbn Made Windows service tray status windows resizable.
467 rbn Fixed horizontal scrolling of text in status window.
468 rbn Preserve horizontal and vertical scroll position while
469 updating. This prevents the display being reset to the
470 top line every 5 seconds.
471 rbn Fix Windows cross-compile compatibilty problems with
472 *nix variants such as OS X without the zic command.
473 rbn Eliminate dependency on man2html.
475 kes Update src/win32/dll/bacula.def for change in BPIPE definition for
477 kes Fix a compiler warning in compat.cpp
478 kes Change strcpy to bstrncpy in compat.cpp
479 kes Remove some broken code in bdb_list.c
480 kes Fix, hopefully the last, ACL problem in the restore command.
481 kes Update the README.mingw32
482 kes Add new version of upgrade-win32-client.txt to examples directory.
483 Submitted by Michel Meyers.
484 kes Print an INFO message in the job report when a Volume is marked Purged.
485 rbn Fixed handling of external program and script execution
486 so that the format of the command line is more flexible.
487 Now executable path names containing spaces are translated
488 to the equivalent short name automatically. The result is
489 passed to cmd.exe with the quotes removed.
491 kes Apply the recycle patch from Richard Mortimer.
492 kes Convert a few if statements in dev.c to switch statements.
493 kes Start using print_errmsg instead of bstrerror().
494 kes Print a job message in SD when a job is marked to be canceled.
496 kes All code added back. Fixed block.c read/write to loop only 3
497 times. This apparently keeps the OS from crashing (at least
499 kes The kernel bug still persists. Backup something then immediately
500 do a bscan on the same tape, and the kernel will crash.
501 kes Simplifed tape open(). It no longer uses nonblocking mode, which
502 means that opening with no tape loaded will probably take at least
503 6 minutes before an error is reported.
504 kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
505 when doing set_os_device_parameters.
506 kes Report open error in mount.c
507 kes Remove all .exe files from the installer directory on make clean.
509 kes Start adding back removed code.
510 kes Back out a number of changes because backups to tape crash my
512 kes Remove the inetd code from the File daemon.
514 kes Add -c option to pg_dump so that it initializes tables when
516 kes Fix FirstWritten time on Volume to be obtained from SD so that
517 it is the actual time the volume was first written.
518 kes Minor Makefile changes.
519 kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
520 ebl Add yes keyword to prune/purge command
522 kes Correct a test in block.c that prevented restore of a DVD from
523 looking at the last part in the spool directory.
524 kes Make some error messages clearer mostly by using the word DVD
525 in the message. Improve infor message in read_record for DVDs.
526 kes Remove DVD kludges in dircmd.c label/relabel.
527 kes Move the dvd relabel code from dircmd.c into
528 write_new_volume_label_to_dvd() adding a relabel argument.
529 kes Rewrite the truncate_dvd() code to be much simpler and
530 more logical. First blow away any spool part, then create a
531 new empty part and write to the DVD.
532 kes Rewrite the can_write_on_non_blank_dvd() code making it
533 only ensure that no valid data is on the DVD -- i.e. it
536 kes Minor Makefile fixes.
537 kes Put attach_dcr_to_dev in a subroutine.
538 kes Make attaching/detaching to/from a device use a flag and
539 only detach if actually attached.
540 kes Add dvd-simulator.in to scripts directory and add to configure.
541 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
542 This could be a cause of a number of drive reservation problems.
543 Note, this code is now in attach_dcr_to_dev().
544 kes Suppress doing Volume updates if it is a system job. This should
545 prevent the DVD label blocking.
546 kes Clear the freespace ok flag in a couple of strategic places.
548 kes Put removing zero sized spool part file in subroutine and
549 call from release_device().
550 kes Add Richard's patch for relabel to dircmd.c, but save and restore
552 kes Rework a lot of subroutines in dev.c to take dcr as an
553 argument. This is done to eliminate the usage of attached_dcrs
555 kes Change truncated_dvd to blank_dvd, which seems more suitable.
556 kes Apply most of Richard Mortimer's truncate patch.
557 kes Create lseek() method for DEVICE that takes dcr as an
558 argument. This is to eliminate the use of attached_dcrs in
559 lseek(). The calls to lseek_dev() must still be changed.
561 kes Apply Richard Mortimer's patches for printing an error
562 message in btape when a DVD is used, and to initialize traceback.
563 kes Added error message to btape when trying to access a file.
564 kes Move prototype of update_slots() to protos.h.
566 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
567 and FDJobStatus to the Director Python variables.
568 kes Make sure valid argument passed to str_to_utime() where Arno
570 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
571 I.e. part of two different patches.
573 kes Modify disk changer to simulate some of the error conditions
575 kes Make sure the close() call in the SD tools is just before the
577 kes Implement dir_get_volume_info() in bls using the patch from
578 Richard Mortimer but call find_num_dvd_parts().
579 kes Implement find_num_dvd_parts() that mounts and scans a DVD
580 and counts the parts.
581 kes Move the omode code in open_dvd() up so that the cannot
582 write on blank disk can check can be bypassed for read mode.
585 kes Disable normal data spooling for DVD writing which uses
586 a different spooling mechanism.
587 kes Apply patch from Richard Mortimer to ensure that the number
588 of DVD parts is correctly updated.
589 rbn Save installer details log in the Bacula directory as
591 rbn Add installer generation of client and storage templates
592 suitable for @inclusion on the director.
593 rbn Mark previously installed components for Win32 read-only since
594 deselection doesn't do anything.
596 Version 1.39.22 beta released:
598 kes Fix logic error in handling error return from mtx-changer
600 kes Make status from SD aware of -1 (unknown) Slot status.
601 kes At Eric's suggestion make both the 'slots' and 'drive' commands
602 to the Storage daemon work even if the drive is busy.
603 kes Make two separate Win32 menu links for starting bconsole and
604 wx-console in winbacula.nsi
605 kes Apply DVD part_spooled patch from Richard Mortimer
606 richm@oldelvet.org.uk
607 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
608 rbn Fixed problems migrating settings from previous releases in
609 Win32 installer. Add Readme.txt with an option to show it on
610 the installer Finish page.
612 kes Use get_catalog_resource() to open catalog database
613 to ensure that ACLs are respected and that user is
614 correctly prompted for database.
615 kes Integrate multiple console/director patch from
616 Carsten Paeth calle@calle.in-berlin.de
617 ebl Add character substitution in Job/JobDefs WriteBootStrap.
618 You can use now 'WriteBootStrap = '/path/%c_%n.bsr''
619 kes Apply patch supplied in bug #656 to pass priority field
620 in the run dialog to the Director in gnome console
621 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
622 this will fix bug #627 where Bacula eventually gets
623 confused about what Volume it wants.
624 kes Add a new close_part() class in the SD to save the device
625 state around open/close_part/open for DVD writing. This
626 should fix the num_dvd_parts getting zeroed as reported by
628 kes Apply patch from Richard Mortimer that correct edit code
629 for debug output of st_size.
630 ebl Add support of encrypted data stream to bscan.
631 display data_len instead of data content (may be binary)
633 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
634 bcopy. Fixes bug #669 reported by Eric.
635 kes Fix incorrect number of arguments in SQL statement in
636 sql_get.c as reported by Eric.
638 kes Update examples directory.
639 kes Remove unused variable in winservice.cpp
640 kes Make Win32 make command build installer.
641 rbn Add new Install Type page, used to select between Automatic
642 and Custom installs. Automatic installs only prompt for
643 configuration items that can't be reasonably defaulted.
644 rbn Added Bacula logo to page headers.
645 rbn Added Upgrade support
646 - Configuration and component selection are migrated from
648 - Configuration of upgraded components is preserved and
650 - Configuration of new components is handled according to
651 the Automatic / Custom selection.
652 - Component selection is defaulted to previously selected
654 rbn Installation of Server components is disabled on
655 Windows 95, 98 and ME.
656 rbn Added URLs for support, info and upgrades to Bacula entry
657 in Add/Remove Programs.
658 rbn Added Version info to Bacula entry in Add/Remove Programs.
660 kes Correct dvd code that breaks tape labeling.
661 kes Implement Enabled on update slots.
663 kes When doing a label, pass the VolBytes back to the Director,
664 which puts it in the catalog.
665 kes Print an error message if the user attempts to prune an
667 kes Need to start using %ld when sscanfing 32 bit values.
669 kes Correct the counting of VolCatBytes for DVDs.
670 kes Add code to mount.c to require that VolCatBytes corresponds to
671 what is actually found when doing an append.
672 kes Update freespace only after writing on the DVD.
673 kes Remove code that blows away the current part in the spool file.
675 kes Apply new dvd-handler patch from Richard Mortimer.
676 kes Tweak so that debug level 20 shows only DVD commands.
677 kes Correct spooled_part flag in dev.c close() so that it is cleared
678 when the spool file is deleted or does not exist.
679 kes Print part number in read_records when eof hit (restore).
680 rbn Installer default changed to start services on new install.
682 kes Make find with no args in tree restore return error rather than
683 stopping the selection. Fixes bug #665
684 kes Rework DVD writing to ensure that the last part is written
685 on open_next_part when dealing with a spool file.
686 kes Correct the lseek_dev() routine to handle end point correctly
687 (bug introduced by me).
688 kes Allow part number to exceed num_dvd_parts in lseek_dev().
689 rbn Change make_session_key on Windows to use WIN32 APIs to produce
691 rbn Add new tool scsilist.exe which displays the changer, tape and
692 CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required
693 to add them to bacula-sd.conf.
695 kes Apply dvd-handler patch from Richard Mortimer.
696 kes Apply dvd error check patch from Richard Mortimer.
697 kes Apply bpipe race patch from Richard Mortimer.
698 kes Rework how DVD labels are handled and set append only
699 when part > num_dvd_parts.
701 kes Rework many features of DVD writing and reading. Added many error
702 messages. Most importantly changed part to represent the current
703 part number base zero. This makes current DVD writing incompatible
704 with previous version.
706 kes Add host:port to connect failure messages to FD and SD from Dir.
707 kes Add WhereACL to console ACL list. If nothing is specified, only
708 the default is permitted for restore. Otherwise, *all* allows any
709 path, or you can specify permitted paths. This should allow control
710 over where users can restore files. This is untested.
711 kes Modified message to add a ? (as in loaded?) when querying the autochanger
712 for what Slot is loaded.
713 kes Fixed the use of Slot, so that is more correctly maintained, thus
714 eliminating unneeded duplicate calls to determine what Slot is loaded.
716 kes Install man pages with 'make install'
717 kes wx-console crashes because of differences between Bacula and wxWidgets
718 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
720 kes correct improper indenting in wx-console/console_conf.c
721 kes update wx-console header copyrights
722 kes Fix bug #658 where wx-console mangles file/directory names containing
725 kes Add Media.Enabled flag to client backups for dotcmds.c
726 kes Enforce Media.Enabled=1 for a current restore to work.
727 kes Require restore case 3 to have sqlquery permission to work.
728 kes Remove obsolete del_MAC sql command.
729 kes Ensure that bscan creates Volumes with Enabled=1.
731 Version 1.39.20 beta released:
733 kes Correct missing Client table reference in SQL pointed out by
736 kes Fix Win32 build (new entrypoint, start baculafd).
738 kes Add -n option to bconsole to turn off conio.
739 kes Print JobIds to be migrated in Job Report.
740 kes Add additional user supplied notes to the messages part of
741 bacula-dir.conf concerning multiple email addresses.
742 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
743 kes Add more recent Feature requests to Projects file.
745 kes Apply Maritn's fix to src/win32/Makefile.
746 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
747 kes Implement pruning for Migration and migrated jobs.
748 kes Implement PoolOccupancy migration.
749 kes Implement PoolTime migration.
751 kes If doing a mount, look for a slot, and if specified pass it to
752 the SD so that it can load the autochanger.
753 kes Return DVD=1 flag if a label command is done to a DVD. This
754 permits setting VolParts to 1.
755 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
756 rework ua_label code based on DVD media type to use DVD flag returned.
758 kes Eliminate some compile warnings in dird_conf.c
759 kes Format the bytes field in the terminated jobs part of the status
760 command for the three daemons with suffixes to reduce print size
761 of backup bytes. Suggested by a user.
762 kes When not descending into a directory, print the File= name that
763 triggered it -- makes why not descending a bit clearer.
764 kes Do not unload autochanger when doing a list command -- basic code
765 from Eric Bollengier.
767 rbn Reworked the MinGW32 build-dependencies script, it has been renamed
768 to build-depkgs-mingw32. It now handles two options -h to display
769 help and -C to reextract the source and apply the patches. The -C
770 option is useful for updating the source after new patches are
772 rbn Moved the 3rd party package URLs to a separate file External-mingw32.
773 This allows updating to new versions without having to modify the
774 script and makes it easier to figure out which packages and which
776 rbn Added a new script build-depkgs-msvc.cmd which does the same thing
777 as build-depkgs-mingw32 except they are built using Microsoft Visual C
778 and placed in the depkgs-msvc directory. There is also an
779 External-msvc file to describe the packages.
781 rbn Fix Windows cross-compile compatibilty problems with FreeBSD.
783 kes Fix bug #462 incorrect error message printed when client script called
784 from File= was not found.
785 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
786 do a rewind on Solaris when no tape is in the drive (Solaris does not
787 have the detailed errno found on Linux). Added Solaris specific code.
788 Note, this may apply to other OSes as well.
790 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
791 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
792 fix bug 648 - update sqlite script patches, lock out gnome2console
793 builds for platforms with gtk+ < 2.4.
794 Updated build_rpm.sh - add remote source directory, add switch for
795 signing, refine file names.
796 Updated spec file again for Mandriva build as they have this curious
797 custom of silently converting all manpages to bzip2 format just before
798 the final packaging step.
800 rbn Fixed the Windows Makefiles so that they won't accidentally try and
801 pickup binaries for the Unix build. This allows both the Unix
802 build and the Windows build to be built in the same tree without
803 interfering with each other.
804 rbn Fixed error handling and cleaned up mtx-changer.cmd.
805 rbn Added the rest of the database scripts. These are installed but are
806 not yet edited for variable replacement.
807 rbn Broke out the cats functionality from bacula.dll and put into new
808 separate dlls for each database type. At installation time the
809 correct one is copied to bacula_cats.dll.
810 rbn Eliminate the need to install the mysql.dll on client only builds.
811 rbn Moved dird/sql_cmds.c into the cats directory so all the database
812 specific #ifdefs were in the cats directory.
813 rbn Added a new sql_cmds.h with all the declarations for the variables
814 exported from sql_cmds.c.
815 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
816 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
818 kes Correct improperly formatted list command output reported by Dan.
820 kes Correct despool time calculation.
822 kes Remove previous changes to compat.cpp as they create problems.
823 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
824 kes Attempt to fix problems with the msg_queue crashing on Solaris
825 when Bacula is terminating, but problems remain.
826 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
827 name editing problems with too many \\?\es.
828 kes Fix some Bacula source code style problems in compat.cpp.
829 kes Add debug code to compat.cpp and convert non-Bacula debug code
832 kes Change the name of the technical notes file from kes-1.39 to
833 technotes-1.39. Prefix my messages with 'kes '.
834 kes Allow dequeue_messages() to be called twice. Should fix bug
836 kes Add Job type to bscan Job information output.
838 kes Update copyright date in program files, and for the most part
840 kes Implement %q in bsnprintf.c apparently I forgot it.
842 kes Make disk-changer sed command compatible with FreeBSD.
843 kes Make a first cut at a ReleaseNotes and ChangeLog for a
845 kes Make make clean descend into the src/win32 directory.
846 kes Fix some #ifdefing so that Solaris and FreeBSD compile
847 sys/stat.h was turned off.
848 kes Use suffix editing for new transfer rate messages.
849 kes Attempt to come up with a workaround which seems to be an OS
850 bug where write() returns EBUSY. IMO this should not happen.
851 It triggered in truncatebug test. The workaround retries using
853 kes Eliminate a strerror() call in a class method that failed with
855 kes Use rm -rf rather than rmdir to delete the src/win32/release
856 directory during make clean.
858 kes Make bscan ignore ACL streams.
859 kes Update projects files with new Feature Requests.
860 kes Generate current English and French manuals and upload
862 kes Update the home page to include the new British/French flags to
863 switch between translations. Work done by Alexandre Baron.
864 kes Make disk-changer script print an error message if the changer
865 directory is not defined.
866 kes Create a generic DB routine for getting an int (32/64 bit) from
868 kes Add more migration code.
869 kes Add a few more files to .cvsignore here and there.
870 kes Minor fixes for SD write rate and despooling rate.
871 kes Turn off new test code in src/console.c
875 kes Incremented the version number to signify that all of Robert's code
876 for Win32 that was in the branch is now integrated into the HEAD,
877 and that Eric has submitted code that we hope will provide limited
878 backward compatibility with 1.38 file daemons (more testing to be
880 kes I rationalized a few of the names of the variables (mainly jcr names)
881 that are used during migration as keeping three different jcrs at the
882 same time clear in ones head is not easy.
886 eb Tweak new runscript feature to work with 1.38.x FDs.
887 eb Correct crypto.c to fix segfault when restoring an encrypted stream
888 on fd which don't use rsa keys.
889 eb Add yes/no English keywords on localized yes/no questions.
891 kes Several important commits from Robert Nelson for code cleanup and
893 kes Modify console.c so that when conio is enabled, it converts \n to
894 \n\r before outputting to the console. Hopefully this will fix
895 the problems with expect in Perl that Eric saw.
897 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
899 kes Add Comment field to llist of a volume.
900 kes Allow true/false in some yes/no questions.
901 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
902 kes Remove a few /n's when scanning commands from another daemon. This
903 permits adding additional fields later.
904 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
905 kes Update README.mingw
907 kes Tweak authentication to work with 1.38.x FDs.
908 kes Tweak catalog make scripts.
909 kes Fix catalog upgrade scripts so that they work.
910 kes Correct despooling debug code to eliminate race condition.
912 kes Add additional fields as specified by Arno to LocationLog.
913 kes Add comment field to the Media record.
914 kes Add Time field to the Log record.
915 kes Correct migration SQL (thanks to Bill Moran) so that it
916 runs with PostgreSQL also.
917 kes Add spooling/despooling info in status output of SD.
919 kes Spend a lot of time integrating mkcdrec with the rescue disk.
920 kes Add VOLMGMT message class for volume management messages (none yet).
921 kes Add CATALOG as a destination. It goes into the LOG table.
922 kes Implement the Log table in the DB.
923 kes Implement the Location Log table in the DB (for user use).
924 kes At Eric's request add a run_scripts() just after blast_data in
927 kes Add Enabled column to Location, correct some typos in DB schemas.
928 kes Correct bug I introduced into RunScripts enum.
929 kes Add log table to Catalog
930 kes Purge original job migrated if the migration terminates normally.
931 kes Cleanup purging of files/jobs so that it is done only in a
933 kes Add new VOLMGMT message class.
934 kes Add Catalog message destination (user conf code remains to be written).
936 kes Modify read_record and friends to properly deal with migration
938 kes Update debug code in read_record.
940 ======================= Warning ==========================
941 Separate read and write storage in Jobs in the Director. This
942 is a major rewrite of some of the low level code and hence has
943 a high probability of introducing bugs.
944 ==========================================================
946 kes Move the job init code up to *before* the job is put into
947 the job queue (resource allocation queue). This permits the
948 job to establish whether it will read or write or do both.
949 kes Add name() methods to all the resource classes.
950 kes Implement separate read and write storage resource
951 allocation/deallocation in jobq.c
953 ======================= Warning ==========================
954 Implemented new method of getting the default Storage from the Media
955 record rather than from the MediaType for restore. As a fall
956 back, if no Storage is defined, use the MediaType. This
957 eliminates most all prompts if there are multiple MediaTypes
958 used. This is an important and fundamental change.
959 ==========================================================
961 kes Add more detail (Storage, Device) to list of volumes printed
963 kes More code in migrate. In particular start multiple jobs if
965 kes Probably overkill, but ensure that the bsr is unique even within a
967 kes Rework bsys.c drop() so that it now should work as expected.
968 kes Update a bunch of old copyrights -kes particularly in .h files.
969 kes Remove src/lib/bshm.c/h
973 ======================= Warning ==========================
974 All hash codes in the database are now kept in world
975 compatible base64 format (no = filling). This means that
976 all FileSets will be updated and if you are running
977 verify jobs, you must do an InitCatalog.
978 Authentication uses the new algorithm, but should be
979 backward compatible with 1.38.x
980 ===========================================================
982 kes Modify the authentication routines so that the 1.39.15 Director
983 always runs with the compatible binary to base64 code (same as
984 the rest of the world). It will however detect if an SD or
985 FD is running the old code and if that is the case, will use
986 the old algorithm for authentication. However, all consoles must
987 use the compatible algorithm, and all data entered into the database
988 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
989 use the compatible algorithm.
990 kes Rename the cram_md5 routine names to be slightly more appropriate
991 to what they are doing (challenge and respond).
992 kes Robert committed his #ifdef and header cleanup.
994 kes Fix a compiler warning in files/backup.c
995 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
997 kes Robert committed his low impact changes.
998 kes I removed a size_t from the jcr.h definition.
999 kes Update the tape regression scripts (still to be tested).
1000 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
1001 kes Require done or quit to exit from in memory tree restore.
1003 kes Write install/uninstall of new manpages. There are now a
1004 pile of man pages. Some of which need a lot of work.
1006 ======================= Warning ==========================
1007 The --mandir ./configure option now points to the top level
1008 man directory. The man files will be installed under
1009 mandir/man8 and mandir/man1 as appropriate.
1010 ==========================================================
1012 kes Add complete text of GPL to LICENSE.
1013 kes Implement job report that indicates where Storage and Pool
1014 came from -kes with overrides and Pool storage and NextPool,
1015 it is all very complicated.
1016 kes Create a few common subroutines for backup.c and migrate.c
1017 kes Eliminate warning messages from tray-monitor.c
1019 kes Apply fix for scheduler for missing unlock_jobs().
1020 kes Clean out autoconf caches before rebuilding configure
1021 kes Fix the FreeBSD pthreads lib define updated by Dan.
1022 kes Add missing semicolon in src/console/console.c
1023 kes Add Robert's enhanced version of build-win32-cross-tools
1024 as well as his patch file.
1025 kes Note, the new gcc options are likely to break building of
1026 wx-console or the tray-monitor ...
1028 kes Implement Robert's suggestion to suppress printing compile lines.
1029 kes Detect GCC correctly (I hope)
1030 kes If using GCC (actually g++) add the following compiler flags
1031 -fno-strict-aliasing -fno-exceptions -fno-rtti
1033 ===================== Warning =============================
1034 Turn on new bsnprintf() code. This could cause print output
1036 ===========================================================
1038 kes Fix crypto when not using openssl. I previously overlooked this.
1039 kes Eliminate crypto type punning problems by eliminating void * and
1040 using uint8_t * instead.
1041 kes Harden authentication failure in FD by single threading errors
1042 and forcing a 6 second wait.
1044 ===================== Warning =============================
1045 Removed 'Accept Any Volume' directive.
1046 ===========================================================
1048 kes Major cleanup and simplification of regress using shell functions
1049 (more tests to be converted to new format)
1050 kes Add detection of 64 bit Irix as indicated by user.
1051 kes Increment catalog database id from 9 to 10.
1052 kes Add a few of the new database fields to the various C++
1054 kes Implement code to fill in the most important new fields (e.g.
1056 kes Ensure that most of the new fields are in create/get/insert/update.
1057 More work to be done.
1059 kes Update some very old licenses in src/cats.
1060 kes Modify the database format for handling Migration jobs:
1061 Add PriorJobId, RealEndTime to Job table
1063 Remove Stripe from JobMedia record (not used, wasting space)
1064 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
1065 Add Cost to Location table.
1066 kes Delete mac_record subroutines.
1067 kes Add new table values to create/update/get routines as appropriate.
1068 kes Update the update_tables and make_tables scripts.
1069 kes Make a first cut in using a union where multiple pointers (actually
1070 pointers to pointers) are stored.
1071 kes Make some changes to base64.c suggested by Robert and others and add
1072 a small amount of documentation.
1073 kes Add some changes suggested by Peter for Solaris (bregex...)
1074 kes Make runscript.h always built because it needs to be pulled into
1075 more places. In particular its RES was left out of a union.
1076 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
1077 This makes it slightly easier to detect uninitialized variables.
1079 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
1080 sometimes creates install problems.
1081 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
1082 Nelson's code. More to do.
1083 kes Convert a few store_bit to store_bool in filed_conf.c.
1084 kes DVD tweak to block.c as supplied by Uwe Muessel.
1086 kes Modify configure.in to check for typeof().
1087 kes In findlib/attribs.c use typeof instead of templates if possible.
1089 kes Implement partial error messages for src/filed/acl.c
1090 kes Fix return code to fail when doing update barcodes and
1091 Pool resource is not found. This previously caused Volumes
1092 to be labeled as cleaning tapes.
1093 kes Small updates to projects.
1095 kes Add Eric Bollengier patch for new RunScript directive. It breaks
1096 compatibility between dird and fd.
1098 kes Prevent DVD code from rewriting label if the device cannot be
1100 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
1101 fix Debian build bug.
1102 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
1103 kes Integrate manpages contributed by Jose Luis.
1104 kes Update projects file.
1105 kes Add manpages Makefile.in to configure.in
1106 kes Remove installation of bacula.8 in scripts directory.
1108 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
1110 O_NOATIME is a open() flag which makes it possible to read a file without
1111 updating the inode atime (and also without the inode ctime update which
1112 happens if you try to set the atime back to its previous value). It also
1113 prevents a race condition when two programs are reading the same file, but
1114 only one does not want to change the atime. It's most useful for backup
1115 programs and file integrity checkers (and bacula can fit on both
1118 Recent versions of the Linux kernel and glibc have support for it (the
1119 glibc support being mostly copying the O_NOATIME definition to
1120 bits/fcntl.h). If there's no support for it on the kernel, trying to use
1121 it does nothing (since the kernel ignores unknown flags).
1123 If the kernel has support for it, trying to use it either works, fails
1124 silently (mostly in remote filesystems), or returns errno=EPERM (if you
1125 are not either the owner of the file or root). A simple way to prevent the
1126 failure is to open the file without the flag and set it later with
1127 fcntl(F_SETFL), ignoring any EPERM errors.
1128 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
1129 of restarted jobs to complete (due to a destroyed pthreads conditional
1130 variable used by the message thread).
1131 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
1133 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
1134 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
1135 colons in query.sql file.
1136 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
1137 not to create orphans.
1138 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
1139 in restore long listing.
1140 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
1141 of incorrect MarkedId.
1142 kes Apply patch from adioso bug #616 to correct text in manual (replace
1143 Director with File daemon).
1144 kes Rework a few of the zlib changes so that they build properly.
1147 kes Move DIR 'run' command to SD before starting the message thread
1148 as suggested by Cristopher Hull to avoid a race deadlock from
1149 two threads using the bsock structure.
1150 kes Modify LICENSE to correct some problems pointed out by Debian.
1152 kes Correct EOF with no \n lex.c problem.
1153 kes Tweak compat.h compat.cpp and merge with apcupsd
1154 kes Add additional INFO messages if autochanger cannot be used.
1157 kes Simplify Win32 Makefile
1158 kes Correct count of buffers/bytes used by smartall.c
1159 kes Updated compat.h after porting apcupsd to MinGW.
1161 kes Work on getting wx-console building on MinGW. wxWidgets now builds
1162 started adding Makefile ...
1163 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
1165 kes Reloading a bad configuration file doesn't kill director any more.
1166 Thanks to fix from Eric Bollengier.
1168 kes Fix problem of accents with new Win32 code.
1169 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
1170 works in the MinGW build with the exception that there
1171 is a problem with accented characters -kes i.e. there is
1172 some mapping problem with wide characters.
1173 kes The code no longer compiles with Microsoft VC++.
1175 kes Start implementing Christopher's St.Bernard code.
1176 kes Add Christopher's mods for opening files.
1177 kes Strip \r \n from Win32 error messages (Christopher)
1178 kes Add more info about Win32 system if unknown (Christopher)
1179 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
1180 kes Fix a number of incorrect strings marked for translation, when
1181 they should not be (e.g. commands).
1182 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
1183 Patches supplied by user in bugs #608 and #599.
1184 kes Use most recent of st_ctime and st_mtime in restore tree DIR
1185 listing. This fixes some problems with Win32 printing incorrect
1187 kes Correct the clock shift comm time calculation between the DIR
1188 and the FD. It was added rather than subtracted.
1189 kes Strip all backslashes in filenames to be restored on Win32
1190 machines -kes the names should all be in Unix format, and if
1191 there are any backslashes it is most likely due to an improper
1192 FileSet definition, and the files will not otherwise be
1194 kes Remove lib/regex.c (replaced by bregex.c).
1195 kes Delete src/win32/License.txt
1196 kes Modify installer to install LICENSE
1198 kes Fix bug in build-win32-cross-tools script reported by Howard
1199 kes Implement cross compiled bconsole
1201 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
1202 kes Write first cut of README.mingw32
1203 kes Add back ua_label barcode fix from Rufolf Cejka.
1204 kes Integrate the majority of the Mingw cross-tools submission
1205 made by Howard Thomson. Everything compiles, with zlib, openssl,
1206 and VSS turned off. Linking needs a pthreads library ...
1208 kes Add 'Dir Status' button to the gnome console.
1209 kes More work on migration.
1210 kes Restore non-compatible base64 coding to permit compatibility.
1211 kes Display heap stats in Storage daemon without debug level.
1213 kes Integrate most of the MinGW changes -kes more to do.
1215 kes Implement using pg_config for finding PostgreSQL files.
1216 Fixes bug #600. Patch supplied by user.
1217 kes Remove -t option from mktemp in mtx_changer.in and use
1218 working directory. Fixes bug #578.
1219 kes Update job start time after the any run before job so that
1220 files created by the script are only backed up once. Fixes
1222 kes Strip trailing newline only from filenames entered in
1223 the restore command when reading a file. This permits
1224 the user to enter filenames with trailing spaces. Fixes
1225 bug #549. The user supplied a patch that I modified slightly.
1226 kes Use the most recent time (st_mtime, st_ctime) in the dir
1227 command in restore. This gives the user a better idea of what
1228 the newest file really is. This fixes bug #574. The fix
1229 was suggested by the user.
1230 kes Implement a compatible version of base64. This permits external
1231 programs to duplicate Bacula's base64 algorithm using standard
1232 routines. This fixes bugs #296, and 565. Patch submitted by
1234 ================= Note ========================
1235 Previous Signatures stored in the database are no longer
1236 compatible with this. The main downside is for Verify jobs,
1237 and doing an InitCatalog run will fix the problem. Also, the
1238 authentication between the deamons is changed, so all daemons
1239 must be simultaneously upgraded.
1240 ==============================================
1241 If you don't like this fix, set:
1242 const bool compatible = true;
1244 const bool compatible = false;
1247 kes Ensure that DB signature is never NULL.
1248 kes Ensure that DB table names are not translated.
1249 kes Fix scheduler to handle time skew (eg daylight savings).
1250 kes Fix scheduler to use lock_jobs() to avoid most problems
1251 with reload. Window is now milliseconds.
1253 kes Apply patch from Christopher Hull
1254 kes Allow multiple connections to database with different
1256 kes Invalidate the scheduler when doing a reload. Fixes seg
1257 fault, but still 60 second window.
1258 kes Additional info in Reschedule message.
1259 kes Use set_jcr_job_status() everywhere to prevent loss of
1261 kes Display peer IP in FD if error from connecting DIR.
1262 kes Don't increment file count for DIRBEGIN.
1263 kes Replace illegal characters in Win32 filename by _.
1264 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
1265 kes Hash hard link filenames rather than linked list.
1266 kes Fix for security failure in chdir on Win32.
1267 kes Add CreateDirectoryA/W win32 API entry points.
1268 kes Add /silent option to Win32 FD for Install/Remove service.
1269 kes Always print Heap statistics in FD.
1271 kes Remove the -f option from the chown in Makefile.in for more
1273 kes Change setting the group in Makefile.in to use chgrp for
1275 kes Implement a write_store and read_store to replace
1276 dirstore in reserve.c
1277 kes Implement a Bacula read/write lock for Python rather
1278 than using the Python lock to avoid recursive problems.
1279 kes Correct the uninstall directory names in filed/Makefile.in
1280 as reported by a user.
1282 kes Correct some problems with database creation (new tables).
1283 kes Replace a bunch of old 0x%x by %p.
1284 kes Get first cut of Migration with Job selection working.
1286 kes Change store_bit() to store_bool() for the Spooling in
1287 dird_conf.c -kes bug reported by Robert Nelson.
1289 kes Correct Makefile bug found by Dan Langille.
1291 kes Correct Makefile for Solaris /bin/sh
1292 kes Correct mtx-changer.in for Solaris /bin/sh
1293 kes Abort if a conf resource does not have a Name =
1295 kes Change the name of the regex program to bregex.
1296 kes Add the bwild program to the tools directory. It is similar
1297 to the bregex program.
1298 kes Implement create bregex.h and bregex.c in src/lib from the
1299 Python regexp program.
1300 kes Use the new bregex.c to implement Regex expressions on Win32.
1302 kes More work on migration.
1303 kes Implement wild program in tools directory for testing
1304 wild-cards. Almost identical to the regex program.
1305 kes Up port VSS single thread locking code.
1306 kes Replace N_(..) by NT_(...) to inhibit translation of
1308 kes Modify Makefile to change the permissions on Working Directory
1309 to 770 if the directory is created.
1310 kes Do not fail the Makefile if changing the permissions or
1311 owner/group on WorkingDir fails.
1312 kes Remove early selection of Scratch Volumes in the recycling
1314 kes Correct the old recycling algorithm so that Scratch Volumes
1315 are selected when looking for a Volume in the changer.
1316 kes Correct a typo in the Verify SQL reported by Joe Park.
1318 kes Remove automatic case folding on Windows FDs. You must
1319 explictly use the 'Ignore Case = yes' option.
1320 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
1321 scratch volume in an Autochanger early in the 'recycling'
1324 kes Make weof() and clrerror() methods of class DEVICE.
1326 kes Tweak license to include Microsoft restrictions.
1327 kes Move mysql.reconnect to after real_connect(). Thanks to
1328 Frank Sweetser for the patch.
1329 kes Disallow a backslash in a File = directive (Windows junk)
1330 unless the string is quoted.
1331 kes Apply Eric's patch to ua_label.c so that daemon protocol
1333 kes Add NT_ definition for strings that should not be translated.
1334 kes Apply NT_() to ua_label.c
1335 kes Remove timed wait for VSS on Win2K3 as it is not yet
1337 kes Correct bacula.in script to reference bacula-ctl-xx in the
1338 sysconfig directory rather than the bin directory.
1340 kes Fix a long standing bug in the bacula start/stop scripts.
1341 kes Attempt to add the new bacula-ctl-* files to the rpm.
1342 kes Switch to using typeof() for list traversing to avoid
1343 as many FC5 g++ compiler warnings as possible.
1345 kes Split the bacula start/start script into four files:
1346 bacula -kes starts and stops calling other scripts
1347 bacula-ctl-dir -kes starts/stops the director
1348 bacula-ctl-fd -kes starts/stops the File daemon
1349 bacula-ctl-sd -kes starts/stops the Storage daemon
1351 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
1352 kes Correct editing of JobId from int to int64 in fd_cmds.c
1353 kes Eliminate FileSet name race with bash_spaces() and multiple
1354 threads by bashing in a local.
1355 kes Fix error return from 'use storage' to print a correct error
1356 message rather than nothing.
1357 kes Correct false re-read last block error message when two jobs
1358 are simultaneously writing at the end of a tape.
1359 kes Simplify exit conditions in the reserve.c code to avoid
1360 possible non-release of reservation_lock().
1361 kes Suffle lock order in reserve to avoid deadlock between
1362 reservation lock and device mutex.
1364 kes Initialize jcr mutex before first use. Thanks to Thorsten for
1365 tracking this down for me !!!! as it broke the Win32 build.
1367 kes Integrate addition of line count limitation to bsmtp -l from
1368 Sebastian Stark <stark at tuebingen.mpg.de>
1370 kes Implement regex test program in tools directory.
1371 kes Attempt to fix time problem with bsmtp with foreign langs.
1372 kes Add strip_trailing_newline() submitted by user.
1373 kes Implement regex matching in migrate.c
1375 kes Fix bug #537 to allow arbitrary time to mount a volume for
1376 restore, if polling is turned on.
1377 kes If dir_user or dir-group is specified in ./configure apply it to
1378 the working-dir. Fixes bug #533.
1379 kes If rescheduling a job cancel the previous incarnation with the SD.
1380 Fixes bugs #566 and 557.
1381 kes Fix bug #567 do_message() definition type conflict.
1384 kes Add more jcr methods and make mutex and use_count private.
1385 kes Create lock/unlock methods for jcr.
1386 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
1387 records to get to seek position.
1388 kes Integrate patch from bug #561 to correct conio.c signal definitions.
1389 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
1390 terminates correctly by doing pthread_kill(). Do not destroy
1391 SD cond wait variable between executions of the job. Use local
1392 mutex for cond variable to avoid blocking jcr chain. Fix poor
1393 use of jcr use count in jobq.c for restarted jobs.
1394 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
1395 lib/jcr.c -kes prevents locking the jcr chaing.
1396 kes Apply patch from bug #564, which corrects listing volumes with
1397 multiple autochangers. Apply same fix to next volume list.
1398 kes Fix bug #562 where restore bootstrap file is not unique.
1399 kes More details in implementing David's migration syntax proposal.
1400 kes Save and restore dcr when swapping drives so that if we have
1401 a write dcr it is not lost.
1402 kes Use new routine lock_reservations() to lock the reservations
1403 system, and call it while looking for a volume in askdir.c.
1404 This could possibly fix bug #543.
1405 kes Stop SD command loop if job is canceled.
1408 kes Remove old code from findlib/create_file.c
1409 kes Rename mac.c migrate.c
1410 kes Add user friendly display of VolBytes in job report.
1411 kes Rename target... to previous... to make it a bit easier to
1413 kes Add selection type and selection pattern to Migration (idea
1414 given by David Boyes).
1417 kes The po files should now be current.
1418 kes Fix new sql_use_result() code to properly release the
1419 buffers in all cases.
1420 kes Use the keyword ujobid to mean the unique job id; job or jobname
1421 to mean the Job name given on the Name directive, and jobid to
1422 be the numeric (non-unique) job id.
1423 kes Allow listing by any of the above.
1424 kes Add the user friendly job report code for reporting job elapsed time
1425 and rates with suffexes from John Kodis <kodis at comcast.net>.
1426 kes Add Priority and JobLevel as Python settable items.
1427 kes Use TEMPORARY table creation where the table is created by
1429 kes Add new code submitted by Eric for waiting on specific jobid.
1430 kes Add ACL checking for the dot commands.
1431 kes Fix restore of writable FIFOs.
1432 kes Fix a bug in bpipe where the string was freed too early.
1434 kes Modify the Python class examples to inherit object -kes new way
1435 of defining classes. Patch from Felix Schwarz.
1436 kes Implement jobuid to replace old usage of job in keywords as
1437 suggested by Eric Bollengier.
1438 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
1439 wait (wait for all jobs to stop)
1441 wait jobuid=unique id
1443 kes Implement write variables for Python to set Priority (anytime), and
1444 Job Level, only during JobInit event.
1446 kes Fix the block listing bug pointed out by Arno.
1447 kes Update the po files at Eric's request.
1449 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
1450 accept time qualifiers.
1451 kes Make catalog respect ACL.
1452 kes Add recycle count to Media record.
1454 Changes to 1.39.6-beta1 24Feb04
1456 kes Add Rudolf Cejka's new rc-chio-changer.
1457 kes Implement pulling Volume from Scratch Pool if the
1458 Volume is in the autochanger.
1459 kes Implement additional command arguments for update Volume.
1463 kes Back port changes to 1.38.5
1464 kes Fix recycle SQL for StorageId.
1465 kes Fix misplaced quote in mtx-changer script.
1467 kes Note. Your database must be updated, or you must create
1468 a new database. I have not yet incremented the database level.
1469 kes Add Location table.
1470 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
1472 kes Implement create/get mac record in database for adding extended
1473 Migration data to the job record.
1474 kes Add new MAC table to update/make database scripts.
1475 kes Return Storage name used when getting VolumeNames for a job.
1476 kes Change bsr file keyword Storage to Device, which is more accurate.
1477 kes Ensure that Mac records are pruned/purged.
1478 kes Tweak SD tools to deal with changing media type.
1479 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
1480 kes Pass pointer to dcr pointer to acquire_device_for_read() so
1481 that the subroutine can switch devices, and hence dcrs.
1482 kes Modify the multiple MediaType read code to re-use the same
1483 dcr when switching devices. This makes the code much more
1485 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
1486 from a table for restore.
1487 kes Add Storage name to VolParams, but it really should be Device.
1489 kes Add disk-changer to scripts directory + configure/Makefile
1490 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
1491 kes Implement store_bit scanner to replace store_yesno. Mostly done.
1492 kes Implement new store_bool that stores in a bool.
1493 kes Add true/false to yes/no conf directives.
1494 kes Make first cut at changing appropriate store_yesno to store_bool.
1495 kes Complete implementation of Pool storage devices.
1496 kes Move starting clones to job.c
1497 kes Move create_restore_bootstrap_file() to job.c
1498 kes Make copy_storage() more general to be able to handle
1500 kes Cleanup a lot of migration code for manual running, including
1502 kes Move getting a scratch Volume into a subroutine.
1503 kes Make all places a Volume that is added to a pool to
1505 kes Fix bug in autochanger recycle code (improper edit 64 bit).
1506 kes Fix segfault in restore command when no value specified.
1507 kes Start adding code to handle multiple MediaTypes in restore.
1508 kes Eliminate race condition in getting Volume name for
1509 two drive autochanger.
1510 kes More debug code in autochanger.
1511 kes Add storage keyword to bootstrap file, add parsing.
1512 kes Move slot in bsr file into Volume record as there will be
1513 a different slot for each Volume.
1514 kes Create reserve.h
1516 kes Implement Pool storage overrides.
1518 kes Implement first cut of Migration.
1519 kes Implement mysql_use_result() from patch by Karl Hakimian.
1520 This reduces significantly the memory consumption during
1521 the restore tree building, and hence runs faster too.
1522 kes Implement StorageId patch supplied by user (reggie) in bug
1523 #536. This should permit Bacula to work correctly with two
1525 kes Implement Job listing variations suggested by a user.
1526 kes Move updating bootstrap code in backup.c to subroutine
1527 update_bootstrap_file().
1528 kes Add new job status elapsed time and bytes written user
1529 friendly job report output patch sent by John Kodis
1530 <kodis at comcast.ne>.
1531 kes Implement a storage list in Pools.
1532 kes Separate out setup_job() code from run_job().
1533 kes Get migration working -kes lots of changes in mac.c in both
1535 kes Apply patch from user (Eric Bollengier I think) that fixes a
1536 DIR crash when no arguments are supplied to a dot command.
1537 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
1538 kes Fix command arg name->volume in label command of gnome-console.
1539 kes Fix SD acquire.c to release correct DCR by explicitly testing
1540 on the dcr address rather than trying to devine if it is a read
1541 or write dcr. This failed in error conditions when the device was
1545 kes Apply user supplied patch for more readable rate output
1547 kes Continue implementing migration.
1548 kes Implement support for removable filesystems in SD.
1549 kes Ensure that btraceback scripts can be read by anyone.
1550 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
1551 kes Correct bug where canceling restore before the FD contacts
1552 the SD causes the drive to be left in read mode.
1553 kes Move ofline_or_rewind into DEVICE::close().
1554 kes Eliminate close_device.
1555 kes Convert several dev subroutines to methods (e.g. bsf,
1557 kes Eliminate force_close_device().
1558 kes Implement Device Type directive in Device resource that
1559 can have values File, Tape, Fifo, DVD, or Prog.
1560 kes Add has_cap() method to Device.
1563 kes Add patch from bug #527 to allow RedHat user to specify
1564 options/user/group for starting each daemon in
1565 /etc/sysconf/bacula.
1567 kes Add two new queries to query.sql provided by Arno. One
1568 list volumes known to the Storage device, and the other
1569 lists volumes possibly needing replacement (error, ...).
1571 kes Add periodic (every 24 hours) garbage collection of memory
1572 pool by releasing free buffers.
1574 kes Correct bug counting sized (for display only) in smartall.c
1575 kes Print FD mempool stats if debug > 0 rather than 5.
1577 kes Make db_lock() mutex error fail the job rather than abort
1578 Bacula. Canceling the job caused the mutex to fail.
1579 kes Correct bug in alist.c that re-allocated the list if the
1580 number of items goes to zero.
1581 kes Move the reservation system thread locking to the top level
1582 so that one job at a time tries all possible drives before
1584 kes Implement a reservation 'fail' message queue that is built
1585 and destroyed on each pass through the reservation system.
1586 These messages are displayed in a 'Jobs waiting to reserve
1587 a drive' list during a 'status storage='. Note, multiple
1588 messages will generally print for each JobId because they
1589 represent the different problems with either the same drive
1590 or different drives. If this output proves too confusing
1591 of voluminous, I will display it only when debug level 1
1592 or greater is enabled in the SD.
1594 kes Add enable/disable job=<job-name>. This command prevents
1595 the specified job from being scheduled. Even when disabled,
1596 the job can be manually started from the console.
1597 kes During 'update slots' clear all InChanger flags where the
1598 StorageId is zero (old Media records).
1600 Beta release 1.38.4:
1602 kes Fix autochanger code to strip leading spaces from returned
1603 slots number. Remove bc from chio-changer.
1604 kes Back port a bit of 1.39 crypto code to reduce diffs.
1605 kes Fix first call to autochanger that missed close()ing the
1606 drive. Put close() just before each run_program(). Fixes
1609 kes Add PoolId to Job record when updating it at job start time.
1611 kes Pull in more code from 1.39 so that there are fewer file
1612 differences (the new ua_dotcmds.c, base64.h, crypto.h
1613 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1614 util.c. Aside from ua_dotcmds.c these are mostly crypto
1616 kes Implement new method of walking the jcr chain. The
1617 incr/dec of the use_count is done within the walking
1618 routines. This should prevent a jcr from being freed
1619 from under the walk routines.
1624 kes Start implementing Verify list output.
1625 kes Move the suitable_drive flag to a better place to prevent
1626 premature termination of the reservation if all drives
1627 are busy -kes should fix Arno's diff/inc pool failures.
1629 kes Add mutex to single thread VSS code in Win32.
1631 kes Simplify code in askdir.c that waits for creating an appendable
1632 volume so that it can handle multiple returns from the wait
1634 kes Modify the wait code to permit multiple returns.
1635 kes Return a zero when 'autochanger drives' is called and
1636 it is not an autochanger.
1637 kes Make rewind_dev() a method taking a DCR as an argument.
1638 This permits closing and reopening the drive if the
1639 rewind fails as happens if the drive was loaded while the
1640 file descriptor was open. This refreshes the file descriptor.
1641 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1642 if the device is open or not. This should eliminate
1644 kes Return error if reserve cannot find at least one suitable device.
1645 kes Make wait_for_sysop() return correct state information.
1646 kes Fix Win32 state file problem. write was not using compat
1647 code. This should fix bug #500.
1649 kes Modify gui on command to set only GUI mode and not batch.
1650 kes Modify .messages command to always print messages regardless
1652 kes If GUI mode is on, suppress automatic printing of
1654 kes Delete old bnet packet code.
1655 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1656 wx-console. -kes not implemented because bconsole must be updated.
1657 kes Modify restore command in wx-console to set gui on and to use
1658 only .messages instead of messages. Hopefully this fixes bug
1660 kes Fix seg fault in exit of acquire when canceling a job --
1661 reported by Wolfgang Denk
1662 kes Pull in latest reservation system changes from 1.38
1663 kes Make .messages command always print messages regardless
1664 of the automessages flag.
1666 kes Fix seg fault if user labels a drive directory bug #513
1667 kes Remove quotes around Version as it breaks things.
1669 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1670 kes Apply sparse code fix for raw drives and fifos. Bug 506
1671 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1673 kes Correct reservation system to do a last ditch try
1674 for any mounted volume, then anyone anywhere.
1675 kes Add quotes around table Version because of
1676 error in MySQL 4.1.15 -kes bug report submitted.
1677 kes Correct some minor problems with btape in the fill
1679 kes Updates to ssh-tunnel from Joshua Kugler.
1680 kes Added a report.pl program from Jonas Bjorklund.
1681 kes Simplify the O_NONBLOCK open() code for tape drives,
1682 and always open nonblocking.
1683 kes Do not wait for open() if EIO returned (shouldn't happen).
1684 kes Eliminate 3 argument to tape open().
1685 kes Correct the slot # edited in the 3995 Bad autochanger unload
1687 kes With -S on bscan (show progress) do not divide by zero.
1689 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1690 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1691 kes Remove unused code in wait_for_device.
1692 kes Make wait_for_device() always return after 60 seconds of wait.
1696 kes Add stubs for non-crypto build.
1698 kes Use localhost if no network configured
1700 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1701 kes Remove debug print.
1702 kes Add bail_out in error during state file reading.
1704 kes Merge changes made to 1.38.3 into HEAD
1705 kes Add stubs for pygtk-console code
1706 kes Create Makefile.in for pygtk-console code
1708 kes Merge updates into 1.38 branch
1709 kes Update specs to include mysql4 define.
1710 kes Fix when attributes are sent, must be after binit().
1711 kes Stop read_record() if status not ok in second loop.
1712 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1713 and partial records in read_record(). This allows bscan
1714 to get FileIndex at EOT correct.
1715 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1717 kes Fix Win32 built to work with new crypto code.
1718 kes Apply patch supplied by user (slightly modified) to fix
1719 correct detection of holes in block devices and FIFOs.
1721 kes Apply patch supplied by user (slightly modified)
1722 to fix SD hang with multiple pools and bad client
1723 IP. Fixes bug # 508.
1725 kes Add nagios plugin to the examples directory. Submitted by
1727 kes Remove warning message about multiple saves of hardlinked files
1728 from find_one.c as it can generate too many warning messages.
1729 kes Modify most restore error messages to be queued so that they
1730 appear at the end of the job rather than mixted with the restore
1731 listing where they could be 'lost'.
1733 kes Reset timeout values before select() per patch from
1734 Frank Sweetser for problems with non-blocking sockets.
1735 kes Unlink the state file if either reading or writing it gets
1736 errors. Hopefully this will fix Win32 exit problems.
1737 kes Add sanity check in append.c to ensure that dcr is not NULL.
1738 This can happen if multiple drive autochanger SCSI control
1739 channel and drive indicies do not correspond.
1741 kes Get next volume from Scratch pool before creating a volume.
1742 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1743 kes Remove argument from create_bacula_database for SQLite as it
1745 kes Add back index code so that two drive autochangers can get
1747 kes Change a bunch of debug levels to aid debugging autochangers.
1748 kes Fix reservation so that mutexes are properly applied.
1749 kes Rework reservation algorithm so that two drives can be used
1752 kes Landon merged his data encription changes into the HEAD
1753 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1754 If this patch is applied, the number of days can be specified with
1755 'list nextvol days=xx'
1757 'status dir days=xx'
1758 My use case is to be able to preview the next scheduled job (and the
1759 next tape to be used) on fridays if there are no scheduled jobs during
1763 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1764 kes Fix malformatted bnet error message that caused seg fault
1766 kes Applied user patch to improve README.vc8 in src/win32.
1768 kes Add Migrate, Copy, Archive Job types (some where there)
1769 kes Correct some more editing of JobId's (for 64 bit compatibility).
1770 kes Ensure that StorageId is stored in Media record when ever possible.
1771 kes Add Migration Job to Job.
1772 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1773 Next Pool to Pool resource.
1774 kes Add more code to mac.c (migration archive copy).
1775 kes Change Start Storage daemon job to require read and write storage
1777 kes Pass read storage data to SD as well as write storage data.
1778 kes Remove old code from winservice.cpp
1779 kes Break on error in scan.
1780 kes Fix typo in signal.c
1781 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1782 kes Cleanup how find_device() works.
1783 kes Add read output to Status in SD.
1786 kes Add red-black btree routines
1788 kes Remove abs() in bfile.c so that it compiles on Solaris.
1791 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1792 kes Fix bnet-server bug found on OpenBSD. Bug #486
1793 kes Fix cancel failure bug. Bug #481
1794 kes Fix failure when Pool name has spaces. Bug #487
1795 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1796 kes Fix a couple of free()s in src/filed/acl.c
1797 kes Fix memory overrun in bfile.c in building OS X resource
1798 fork filename. Bug #489
1799 kes Add Pool name to SD status output.
1801 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1802 kes Make sure to set storage before trying to set drive.
1803 kes Add bacula_mail_summary.sh to examples directory. It makes
1804 a single email summary of any number of jobs. Submitted
1806 kes Make sure when we do a mount to unblock the device even
1807 if the drive could not be opened.
1809 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1810 and correct a few minor problems to make it build on Linux.
1812 kes Remove delete of CVS from all Makefiles
1813 kes Fix seg fault when clicking on Add button in wx-console
1814 restore panel. Bug #470.
1815 kes Fix copyright date and URL typo -kes bug #468.
1816 kes Change autostart install for FreeBSD to look for rc.conf
1817 rather than rc.local as suggested fix for bug #466.
1818 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1819 grant on status. Bug #465
1820 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1821 update script. Bug #464
1822 kes Tweak #ifdefing a bit in new Win32 stream code.
1823 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1824 kes Add documentation of performance #defines
projects / bacula / bacula / blob